Context Navigation

Back to Ticket #35

Ticket #35: BOOT_dadzone-20131009-ahci-1.31.log

File BOOT_dadzone-20131009-ahci-1.31.log, 99.9 KB (added by losepete, 11 years ago)

Line
1	File created 9 Oct 2013 02:32:15 by TESTLOG.CMD V2.6 available at http://88watts.net
2	Test result: ahci boot test
3	----- Output of: bldlevel H:\os2\boot\os2ahci.add -----------------------------------------------
4	Build Level Display Facility Version 6.12.675 Sep 25 2001
5	(C) Copyright IBM Corporation 1993-2001
6	Signature: @#D Azarewicz:1.31#@##1## 7 Sep 2013 09:06:14 DAZAR1 ::::::@@AHCI Driver (c) 2013 D Azarewicz
7	Vendor: D Azarewicz
8	Revision: 1.31
9	Date/Time: 7 Sep 2013 09:06:14
10	Build Machine: DAZAR1
11	File Version: 1.31
12	Description: AHCI Driver (c) 2013 D Azarewicz
13	----- Output of: bldlevel H:\os2\boot\danis506.add ----------------------------------------------
14	Build Level Display Facility Version 6.12.675 Sep 25 2001
15	(C) Copyright IBM Corporation 1993-2001
16	Signature: @#slainc:1.8.15#@##1## 2013/04/23 18:00:41 slamain::::15::@@Adapter Driver for PATA/SATA DASD
17	Vendor: slainc
18	Revision: 1.08.15
19	Date/Time: 2013/04/23 18:00:41
20	Build Machine: slamain
21	File Version: 1.8.15
22	Description: Adapter Driver for PATA/SATA DASD
23	----- Output of: type os2ahci$ ------------------------------------------------------------------
24	BldLevel: @#D Azarewicz:1.31#@##1## 7 Sep 2013 09:06:14 DAZAR1 ::::::@@AHCI Driver (c) 2013 D Azarewicz
25	CmdLine: OS2AHCI.ADD /d:2
26	[62] scanning PCI bus...
27	[83] Adapter 0 PCI=0:18:0 ID=1002:4380
28	[83] BAR #0: type = I/O, addr = 0x00008000, size = 8
29	[83] BAR #1: type = I/O, addr = 0x00007000, size = 4
30	[83] BAR #2: type = I/O, addr = 0x00006000, size = 8
31	[83] BAR #3: type = I/O, addr = 0x00005000, size = 4
32	[83] BAR #4: type = I/O, addr = 0x00004000, size = 16
33	[83] BAR #5: type = MEM, addr = 0xfe6ff800, size = 1024
34	[126] Adapter 1 PCI=2:0:0 ID=11ab:6121
35	[126] BAR #0: type = I/O, addr = 0x0000b800, size = 8
36	[126] BAR #1: type = I/O, addr = 0x0000b400, size = 4
37	[126] BAR #2: type = I/O, addr = 0x0000b000, size = 8
38	[126] BAR #3: type = I/O, addr = 0x0000a800, size = 4
39	[126] BAR #4: type = I/O, addr = 0x0000a400, size = 16
40	[126] BAR #5: type = MEM, addr = 0xfe8ffc00, size = 1024
41	[126] Adapter 2 PCI=4:0:0 ID=11ab:6121
42	[126] BAR #0: type = I/O, addr = 0x0000e800, size = 8
43	[126] BAR #1: type = I/O, addr = 0x0000e400, size = 4
44	[126] BAR #2: type = I/O, addr = 0x0000e000, size = 8
45	[126] BAR #3: type = I/O, addr = 0x0000d800, size = 4
46	[126] BAR #4: type = I/O, addr = 0x0000d400, size = 16
47	[126] BAR #5: type = MEM, addr = 0xfeaffc00, size = 1024
48	[128] Registered kernel exit routine for INT13 mode
49	[134] IORB 0818:8f42 queued (cmd = 1/1, queue = 0728:59ca [driver], timeout = 0)
50	[134] ahci_save_bios_config: BIOS AHCI mode is 0
51	[134] AHCI global registers for adapter 0 0:18:0 irq=22 addr=0xfe6ff800
52	00: f3229f83 - 64bit ncq sntf mps led clo pmp pio_multi ccc cmd_slots:32 ports:4
53	04: 00000000 -
54	08: 00000000
55	0c: 0000000f
56	10: 00010100
57	14: 000101f8
58	18: 00000000
59	1c: 00000000
60	20: 00000000
61	24: 00000000 -
62	[134] ahci_scan_ports: scanning ports on adapter 0
63	[134] ahci_scan_ports: Wait till not busy on port 0
64	[134] ahci_reset_port: resetting port 0.0
65	[134] AHCI port 0 registers:
66	PORT_CMD = 0x42006
67	command engine status:
68	PORT_SCR_ACT = 0x0
69	PORT_CMD_ISSUE = 0x0
70	link/device status:
71	PORT_SCR_STAT = 0x123
72	PORT_SCR_CTL = 0x300
73	PORT_SCR_ERR = 0x0
74	PORT_TFDATA = 0x50
75	interrupt status:
76	PORT_IRQ_STAT = 0x0
77	PORT_IRQ_MASK = 0x0
78	HOST_IRQ_STAT = 0x0
79	[134] ahci_stop_port 0.0
80	[134] ahci_reset_port: setting link speed and power management options
81	[134] ahci_reset_port: issuing COMRESET on port 0
82	[136] Wait for communication...
83	[156] ahci_reset_port: starting port 0 again
84	[156] ahci_start_port 0.0
85	[156] ahci_start_port: PORT_SCR_STAT = 0x123
86	[156] ahci_start_port: PORT_SCR_ERR = 0x0
87	[156] ahci_reset_port: PORT_TFDATA = 0x150
88	[156] ahci_scan_ports: port 0 seems to be attached to a device; probing...
89	[156] ATA command for 0.0.0, slot 0:
90	[156] cmd_hdr: 0748:0000 05 00 01 00 00 00 00 00-00 c5 ef 00 00 00 00 00 ................
91	[156] ata_cmd: 1530:4cd0 00 00 00 00 00 00 00 00-00 00 ec 00 ............
92	[156] sg_list: 0748:0580 aa 1e f9 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................
93	[156] executing polled cmd...[187] success
94	[187] ATA_IDENTIFY results:
95	0728:2eaa 40 00 ff 3f 37 c8 10 00-56 88 2a 02 3f 00 00 00 @..?7...V.*.?...
96	0728:2eba 00 00 00 00 31 31 37 37-31 4a 4c 46 32 34 36 38 ....11771JLF2468
97	0728:2eca 33 33 00 00 00 00 00 00-03 00 00 40 04 00 54 57 33.........@..TW
98	0728:2eda 30 31 2d 30 31 34 41 53-53 4d 4e 55 20 47 44 48 01-014ASSMNU GDH
99	0728:2eea 38 30 48 30 20 4a 20 20-20 20 20 20 20 20 20 20 80H0 J
100	0728:2efa 20 20 20 20 20 20 20 20-20 20 20 20 20 20 10 80 ..
101	0728:2f0a 00 00 00 2f 00 40 00 02-00 02 07 00 ff 3f 10 00 .../.@.......?..
102	0728:2f1a 3f 00 10 fc fb 00 10 01-b0 f8 50 09 00 00 07 00 ?.........P.....
103	0728:2f2a 03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00 ..x.x.x.x.......
104	0728:2f3a 00 00 00 00 00 00 1f 00-06 07 00 00 4c 00 40 00 ............L.@.
105	0728:2f4a fe 00 21 00 6b 74 01 7f-23 40 69 74 01 be 23 40 ..!.kt.#@it..#@
106	0728:2f5a ff 40 16 00 16 00 00 00-fe ff 00 00 fe fe 00 00 .@..............
107	0728:2f6a 00 00 00 00 00 00 00 00-b0 f8 50 09 00 00 00 00 ..........P.....
108	0728:2f7a 00 00 00 00 00 00 00 00-00 50 00 0f 42 1b 33 86 .........P..B.3.
109	0728:2f8a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 10 40 ...............@
110	0728:2f9a 10 40 00 00 00 00 00 00-00 00 00 00 00 00 00 00 .@..............
111	0728:2faa 29 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 )...............
112	0728:2fba 00 00 00 00 00 00 00 00-ff ff 00 04 00 17 03 00 ................
113	0728:2fca 00 00 00 9a 00 03 00 24-20 63 31 36 00 00 00 00 .......$ c16....
114	0728:2fda 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
115	0728:2fea 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
116	0728:2ffa 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
117	0728:300a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
118	0728:301a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
119	0728:302a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
120	0728:303a 00 00 00 00 00 00 00 00-00 00 00 00 3f 00 00 00 ............?...
121	0728:304a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
122	0728:305a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
123	0728:306a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
124	0728:307a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
125	0728:308a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
126	0728:309a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 6a ...............j
127	[187] found device 0.0.0: removable = 0, dev_type = 0, atapi = 0, ncq_max = 1
128	[187] ahci_stop_port 0.0
129	[187] ahci_scan_ports: Wait till not busy on port 1
130	[187] ahci_reset_port: resetting port 0.1
131	[187] AHCI port 1 registers:
132	PORT_CMD = 0x42006
133	command engine status:
134	PORT_SCR_ACT = 0x0
135	PORT_CMD_ISSUE = 0x0
136	link/device status:
137	PORT_SCR_STAT = 0x113
138	PORT_SCR_CTL = 0x300
139	PORT_SCR_ERR = 0x0
140	PORT_TFDATA = 0x50
141	interrupt status:
142	PORT_IRQ_STAT = 0x40000000
143	PORT_IRQ_MASK = 0x0
144	HOST_IRQ_STAT = 0x0
145	[187] ahci_stop_port 0.1
146	[187] ahci_reset_port: setting link speed and power management options
147	[187] ahci_reset_port: issuing COMRESET on port 1
148	[189] Wait for communication...
149	[218] ahci_reset_port: starting port 1 again
150	[218] ahci_start_port 0.1
151	[218] ahci_start_port: PORT_SCR_STAT = 0x113
152	[218] ahci_start_port: PORT_SCR_ERR = 0x0
153	[218] ahci_reset_port: PORT_TFDATA = 0x100
154	[218] ahci_scan_ports: port 1 seems to be attached to a device; probing...
155	[218] ATA command for 0.1.0, slot 0:
156	[218] cmd_hdr: 0748:7800 05 00 01 00 00 00 00 00-00 3d f0 00 00 00 00 00 .........=......
157	[218] ata_cmd: 1530:4cd0 00 00 00 00 00 00 00 00-00 00 a1 00 ............
158	[218] sg_list: 0748:7d80 aa 1e f9 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................
159	[218] executing polled cmd...[250] success
160	[250] ATA_IDENTIFY_PACKET results:
161	0728:2eaa c0 85 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
162	0728:2eba 00 00 00 00 57 4b 43 37-54 42 31 45 35 31 20 37 ....WKC7TB1E51 7
163	0728:2eca 20 20 20 20 20 20 20 20-00 00 00 00 00 00 4e 52 ......NR
164	0728:2eda 30 30 20 20 20 20 4c 48-44 2d 2d 54 54 53 44 20 00 LHD--TTSD
165	0728:2eea 44 56 41 52 20 4d 48 47-34 32 53 4e 35 39 20 20 DVAR MHG42SN59
166	0728:2efa 20 20 20 20 20 20 20 20-20 20 20 20 20 20 00 00 ..
167	0728:2f0a 00 00 00 0f 00 40 00 02-00 02 06 00 00 00 00 00 .....@..........
168	0728:2f1a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 07 00 ................
169	0728:2f2a 03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00 ..x.x.x.x.......
170	0728:2f3a 00 00 00 00 00 00 00 00-02 04 00 00 60 00 40 00 ............`.@.
171	0728:2f4a f0 01 10 02 50 42 10 40-00 41 50 42 00 00 00 41 ....PB.@.APB...A
172	0728:2f5a 7f 20 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ..............
173	0728:2f6a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
174	0728:2f7a 00 00 00 00 00 00 00 00-01 50 00 48 00 00 00 00 .........P.H....
175	0728:2f8a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
176	0728:2f9a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
177	0728:2faa 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
178	0728:2fba 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
179	0728:2fca 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
180	0728:2fda 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
181	0728:2fea 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
182	0728:2ffa 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
183	0728:300a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
184	0728:301a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
185	0728:302a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
186	0728:303a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
187	0728:304a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
188	0728:305a 00 00 00 00 00 00 00 00-00 00 00 00 3f 10 00 00 ............?...
189	0728:306a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
190	0728:307a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
191	0728:308a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
192	0728:309a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 19 ................
193	[250] found device 0.1.0: removable = 1, dev_type = 5, atapi = 1, ncq_max = 1
194	[250] ahci_stop_port 0.1
195	[250] ahci_scan_ports: Wait till not busy on port 2
196	[250] ahci_reset_port: resetting port 0.2
197	[250] AHCI port 2 registers:
198	PORT_CMD = 0x42006
199	command engine status:
200	PORT_SCR_ACT = 0x0
201	PORT_CMD_ISSUE = 0x0
202	link/device status:
203	PORT_SCR_STAT = 0x123
204	PORT_SCR_CTL = 0x300
205	PORT_SCR_ERR = 0x0
206	PORT_TFDATA = 0x50
207	interrupt status:
208	PORT_IRQ_STAT = 0x0
209	PORT_IRQ_MASK = 0x0
210	HOST_IRQ_STAT = 0x0
211	[250] ahci_stop_port 0.2
212	[250] ahci_reset_port: setting link speed and power management options
213	[250] ahci_reset_port: issuing COMRESET on port 2
214	[251] Wait for communication...
215	[281] ahci_reset_port: starting port 2 again
216	[281] ahci_start_port 0.2
217	[281] ahci_start_port: PORT_SCR_STAT = 0x123
218	[281] ahci_start_port: PORT_SCR_ERR = 0x0
219	[281] ahci_reset_port: PORT_TFDATA = 0x150
220	[281] ahci_scan_ports: port 2 seems to be attached to a device; probing...
221	[281] ATA command for 0.2.0, slot 0:
222	[281] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
223	[281] ata_cmd: 1530:4cd0 00 00 00 00 00 00 00 00-00 00 ec 00 ............
224	[281] sg_list: 0750:0580 aa 1e f9 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................
225	[281] executing polled cmd...[312] success
226	[312] ATA_IDENTIFY results:
227	0728:2eaa 40 00 ff 3f 37 c8 10 00-00 00 00 00 3f 00 00 00 @..?7.......?...
228	0728:2eba 00 00 00 00 32 53 36 34-44 4a 53 57 35 43 34 34 ....2S64DJSW5C44
229	0728:2eca 37 33 20 20 20 20 20 20-00 00 ff ff 04 00 41 31 73 ......A1
230	0728:2eda 31 4a 30 30 34 45 41 53-53 4d 4e 55 20 47 44 48 1J004EASSMNU GDH
231	0728:2eea 30 31 53 33 20 4a 20 20-20 20 20 20 20 20 20 20 01S3 J
232	0728:2efa 20 20 20 20 20 20 20 20-20 20 20 20 20 20 10 80 ..
233	0728:2f0a 00 40 00 2f 00 40 00 02-00 02 07 00 ff 3f 10 00 .@./.@.......?..
234	0728:2f1a 3f 00 10 fc fb 00 10 01-ff ff ff 0f 00 00 07 00 ?...............
235	0728:2f2a 03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00 ..x.x.x.x.......
236	0728:2f3a 00 00 00 00 00 00 1f 00-06 17 00 00 4c 00 40 00 ............L.@.
237	0728:2f4a ff 01 28 00 6b 74 69 7f-23 41 69 74 41 be 23 41 ..(.kti#AitA.#A
238	0728:2f5a 7f 40 4b 00 4b 00 00 00-fe ff 00 00 fe fe 00 00 @K.K...........
239	0728:2f6a 00 00 00 00 00 00 00 00-b0 6d 70 74 00 00 00 00 .........mpt....
240	0728:2f7a 00 00 00 00 00 40 00 00-02 50 90 4e ab 02 4f 4b .....@...P.N..OK
241	0728:2f8a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 1c 40 ...............@
242	0728:2f9a 1c 40 00 00 00 00 00 00-00 00 00 00 00 00 00 00 .@..............
243	0728:2faa 29 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 )...............
244	0728:2fba 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
245	0728:2fca 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
246	0728:2fda 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
247	0728:2fea 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
248	0728:2ffa 02 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
249	0728:300a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
250	0728:301a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
251	0728:302a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
252	0728:303a 00 00 00 00 00 00 00 00-00 00 00 00 3f 00 00 00 ............?...
253	0728:304a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
254	0728:305a 00 00 20 1c 00 00 00 00-00 00 00 00 1f 10 00 00 .. .............
255	0728:306a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
256	0728:307a 00 00 00 00 01 00 00 04-00 00 00 00 00 00 00 00 ................
257	0728:308a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
258	0728:309a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 a3 ................
259	[312] found device 0.2.0: removable = 0, dev_type = 0, atapi = 0, ncq_max = 1
260	[312] ahci_stop_port 0.2
261	[312] ahci_scan_ports: Wait till not busy on port 3
262	[312] ahci_reset_port: resetting port 0.3
263	[312] AHCI port 3 registers:
264	PORT_CMD = 0x42006
265	command engine status:
266	PORT_SCR_ACT = 0x0
267	PORT_CMD_ISSUE = 0x0
268	link/device status:
269	PORT_SCR_STAT = 0x4
270	PORT_SCR_CTL = 0x304
271	PORT_SCR_ERR = 0x80000
272	PORT_TFDATA = 0x7f
273	interrupt status:
274	PORT_IRQ_STAT = 0x0
275	PORT_IRQ_MASK = 0x0
276	HOST_IRQ_STAT = 0x0
277	[312] ahci_stop_port 0.3
278	[312] ahci_reset_port: setting link speed and power management options
279	[312] ahci_reset_port: issuing COMRESET on port 3
280	[314] Wait for communication...
281	[843] no device present after resetting port #3 (PORT_SCR_STAT = 0x0)
282	[843] ahci_stop_port 0.3
283	[843] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
284	[843] ahci_save_bios_config: BIOS AHCI mode is 0
285	[843] AHCI global registers for adapter 1 2:0:0 irq=16 addr=0xfe8ffc00
286	00: ca227f02 - 64bit ncq sss led pmp ssc part cmd_slots:32 ports:3
287	04: 00000000 -
288	08: 00000000
289	0c: 00000007
290	10: 00010000
291	14: 00000000
292	18: 00000000
293	1c: 00000000
294	20: 00000000
295	24: 00000000 -
296	[843] controller can't do NCQ, turning off CAP_NCQ
297	[843] controller can't do PMP, turning off CAP_PMP
298	[843] ahci_scan_ports: scanning ports on adapter 1
299	[843] ahci_scan_ports: Wait till not busy on port 0
300	[843] ahci_reset_port: resetting port 1.0
301	[843] AHCI port 0 registers:
302	PORT_CMD = 0x40000
303	command engine status:
304	PORT_SCR_ACT = 0x0
305	PORT_CMD_ISSUE = 0x0
306	link/device status:
307	PORT_SCR_STAT = 0x0
308	PORT_SCR_CTL = 0x0
309	PORT_SCR_ERR = 0x0
310	PORT_TFDATA = 0x7f
311	interrupt status:
312	PORT_IRQ_STAT = 0x0
313	PORT_IRQ_MASK = 0x0
314	HOST_IRQ_STAT = 0x0
315	[843] ahci_stop_port 1.0
316	[843] ahci_reset_port: setting link speed and power management options
317	[843] ahci_reset_port: issuing COMRESET on port 0
318	[845] Wait for communication...
319	[1375] no device present after resetting port #0 (PORT_SCR_STAT = 0x0)
320	[1375] ahci_stop_port 1.0
321	[1375] ahci_scan_ports: Wait till not busy on port 1
322	[1375] ahci_reset_port: resetting port 1.1
323	[1375] AHCI port 1 registers:
324	PORT_CMD = 0x40000
325	command engine status:
326	PORT_SCR_ACT = 0x0
327	PORT_CMD_ISSUE = 0x0
328	link/device status:
329	PORT_SCR_STAT = 0x0
330	PORT_SCR_CTL = 0x0
331	PORT_SCR_ERR = 0x0
332	PORT_TFDATA = 0x7f
333	interrupt status:
334	PORT_IRQ_STAT = 0x0
335	PORT_IRQ_MASK = 0x0
336	HOST_IRQ_STAT = 0x0
337	[1375] ahci_stop_port 1.1
338	[1375] ahci_reset_port: setting link speed and power management options
339	[1375] ahci_reset_port: issuing COMRESET on port 1
340	[1376] Wait for communication...
341	[1906] no device present after resetting port #1 (PORT_SCR_STAT = 0x0)
342	[1906] ahci_stop_port 1.1
343	[1906] ahci_scan_ports: Wait till not busy on port 2
344	[1906] ahci_reset_port: resetting port 1.2
345	[1906] AHCI port 2 registers:
346	PORT_CMD = 0xc000000
347	command engine status:
348	PORT_SCR_ACT = 0x0
349	PORT_CMD_ISSUE = 0x0
350	link/device status:
351	PORT_SCR_STAT = 0x0
352	PORT_SCR_CTL = 0x0
353	PORT_SCR_ERR = 0x0
354	PORT_TFDATA = 0x0
355	interrupt status:
356	PORT_IRQ_STAT = 0x0
357	PORT_IRQ_MASK = 0x0
358	HOST_IRQ_STAT = 0x0
359	[1906] ahci_stop_port 1.2
360	[1906] ahci_reset_port: setting link speed and power management options
361	[1906] ahci_reset_port: issuing COMRESET on port 2
362	[1908] Wait for communication...
363	[2437] no device present after resetting port #2 (PORT_SCR_STAT = 0x0)
364	[2437] ahci_stop_port 1.2
365	[2437] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 1
366	[2437] ahci_save_bios_config: BIOS AHCI mode is 0
367	[2437] AHCI global registers for adapter 2 4:0:0 irq=19 addr=0xfeaffc00
368	00: ca227f02 - 64bit ncq sss led pmp ssc part cmd_slots:32 ports:3
369	04: 00000000 -
370	08: 00000000
371	0c: 00000007
372	10: 00010000
373	14: 00000000
374	18: 00000000
375	1c: 00000000
376	20: 00000000
377	24: 00000000 -
378	[2437] controller can't do NCQ, turning off CAP_NCQ
379	[2437] controller can't do PMP, turning off CAP_PMP
380	[2437] ahci_scan_ports: scanning ports on adapter 2
381	[2437] ahci_scan_ports: Wait till not busy on port 0
382	[2437] ahci_reset_port: resetting port 2.0
383	[2437] AHCI port 0 registers:
384	PORT_CMD = 0x40000
385	command engine status:
386	PORT_SCR_ACT = 0x0
387	PORT_CMD_ISSUE = 0x0
388	link/device status:
389	PORT_SCR_STAT = 0x0
390	PORT_SCR_CTL = 0x0
391	PORT_SCR_ERR = 0x0
392	PORT_TFDATA = 0x7f
393	interrupt status:
394	PORT_IRQ_STAT = 0x0
395	PORT_IRQ_MASK = 0x0
396	HOST_IRQ_STAT = 0x0
397	[2437] ahci_stop_port 2.0
398	[2437] ahci_reset_port: setting link speed and power management options
399	[2437] ahci_reset_port: issuing COMRESET on port 0
400	[2439] Wait for communication...
401	[2968] no device present after resetting port #0 (PORT_SCR_STAT = 0x0)
402	[2968] ahci_stop_port 2.0
403	[2968] ahci_scan_ports: Wait till not busy on port 1
404	[2968] ahci_reset_port: resetting port 2.1
405	[2968] AHCI port 1 registers:
406	PORT_CMD = 0x40000
407	command engine status:
408	PORT_SCR_ACT = 0x0
409	PORT_CMD_ISSUE = 0x0
410	link/device status:
411	PORT_SCR_STAT = 0x0
412	PORT_SCR_CTL = 0x0
413	PORT_SCR_ERR = 0x0
414	PORT_TFDATA = 0x7f
415	interrupt status:
416	PORT_IRQ_STAT = 0x0
417	PORT_IRQ_MASK = 0x0
418	HOST_IRQ_STAT = 0x0
419	[2968] ahci_stop_port 2.1
420	[2968] ahci_reset_port: setting link speed and power management options
421	[2968] ahci_reset_port: issuing COMRESET on port 1
422	[2970] Wait for communication...
423	[3500] no device present after resetting port #1 (PORT_SCR_STAT = 0x0)
424	[3500] ahci_stop_port 2.1
425	[3500] ahci_scan_ports: Wait till not busy on port 2
426	[3500] ahci_reset_port: resetting port 2.2
427	[3500] AHCI port 2 registers:
428	PORT_CMD = 0xc000000
429	command engine status:
430	PORT_SCR_ACT = 0x0
431	PORT_CMD_ISSUE = 0x0
432	link/device status:
433	PORT_SCR_STAT = 0x0
434	PORT_SCR_CTL = 0x0
435	PORT_SCR_ERR = 0x0
436	PORT_TFDATA = 0x0
437	interrupt status:
438	PORT_IRQ_STAT = 0x0
439	PORT_IRQ_MASK = 0x0
440	HOST_IRQ_STAT = 0x0
441	[3500] ahci_stop_port 2.2
442	[3500] ahci_reset_port: setting link speed and power management options
443	[3500] ahci_reset_port: issuing COMRESET on port 2
444	[3501] Wait for communication...
445	[4031] no device present after resetting port #2 (PORT_SCR_STAT = 0x0)
446	[4031] ahci_stop_port 2.2
447	[4031] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 2
448	[4031] IORB 0818:8f42 removed (queue = 0728:59ca)
449	[4031] IORB 0818:8f42 complete (status = 0x0001, error = 0x0000)
450	[5843] IORB 0870:03d0 queued (cmd = 1/1, queue = 0728:59ca [driver], timeout = 0)
451	[5843] IORB 0870:03d0 removed (queue = 0728:59ca)
452	[5843] IORB 0870:03d0 complete (status = 0x0001, error = 0x0000)
453	[5843] IORB 0870:03d0 queued (cmd = 1/1, queue = 0728:59ca [driver], timeout = 0)
454	[5843] IORB 0870:03d0 removed (queue = 0728:59ca)
455	[5843] IORB 0870:03d0 complete (status = 0x0001, error = 0x0000)
456	[6041] IORB 0890:84b8 queued (cmd = 1/1, queue = 0728:59ca [driver], timeout = 0)
457	[6041] IORB 0890:84b8 removed (queue = 0728:59ca)
458	[6041] IORB 0890:84b8 complete (status = 0x0001, error = 0x0000)
459	[6041] IORB 0890:84b8 queued (cmd = 2/1, queue = 0728:5b8a [port], timeout = 0)
460	[6041] IORB 0890:84b8 removed (queue = 0728:5b8a)
461	[6041] IORB 0890:84b8 complete (status = 0x0001, error = 0x0000)
462	[6041] IORB 0890:84b8 queued (cmd = 8/2, queue = 0728:5b8a [port], timeout = 10)
463	[6041] ahci_execute_cdb(0.1.0): 0890:853c 12 00 00 00 2e 00 ......
464	[6041] ahci_reset_port: resetting port 0.1
465	[6041] AHCI port 1 registers:
466	PORT_CMD = 0x42006
467	command engine status:
468	PORT_SCR_ACT = 0x0
469	PORT_CMD_ISSUE = 0x0
470	link/device status:
471	PORT_SCR_STAT = 0x113
472	PORT_SCR_CTL = 0x0
473	PORT_SCR_ERR = 0x0
474	PORT_TFDATA = 0x50
475	interrupt status:
476	PORT_IRQ_STAT = 0x0
477	PORT_IRQ_MASK = 0x0
478	HOST_IRQ_STAT = 0x0
479	[6041] ahci_stop_port 0.1
480	[6041] ahci_reset_port: setting link speed and power management options
481	[6041] ahci_reset_port: issuing COMRESET on port 1
482	[6042] Wait for communication...
483	[6062] ahci_reset_port: starting port 1 again
484	[6062] ahci_start_port 0.1
485	[6062] ahci_start_port: PORT_SCR_STAT = 0x113
486	[6062] ahci_start_port: PORT_SCR_ERR = 0x0
487	[6062] ahci_reset_port: PORT_TFDATA = 0x100
488	[6062] ATA command for 0.1.0, slot 0:
489	[6062] cmd_hdr: 0748:7800 25 00 01 00 00 00 00 00-00 3d f0 00 00 00 00 00 %........=......
490	[6062] ata_cmd: 1530:4c8c 05 00 00 00 00 00 00 00-00 00 a0 00 ............
491	[6062] atapi_cmd: 1530:4d0a 12 00 00 00 2e 00 00 00-00 00 00 00 ............
492	[6062] sg_list: 0748:7d80 a4 85 db 00 00 00 00 00-00 00 00 00 2d 00 00 00 ............-...
493	[6062] executing polled cmd on slot 0...[6093]
494	[6093] ahci_stop_port 0.1
495	[6093] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
496	[6093] IORB 0890:84b8 removed (queue = 0728:5b8a)
497	[6093] IORB 0890:84b8 complete (status = 0x0001, error = 0x0000)
498	[6093] IORB 0890:84b8 queued (cmd = 8/2, queue = 0728:5b8a [port], timeout = 10)
499	[6093] ahci_execute_cdb(0.1.0): 0890:853c 12 00 00 00 2c 00 ....,.
500	[6093] ahci_reset_port: resetting port 0.1
501	[6093] AHCI port 1 registers:
502	PORT_CMD = 0x42006
503	command engine status:
504	PORT_SCR_ACT = 0x0
505	PORT_CMD_ISSUE = 0x0
506	link/device status:
507	PORT_SCR_STAT = 0x113
508	PORT_SCR_CTL = 0x0
509	PORT_SCR_ERR = 0x0
510	PORT_TFDATA = 0x50
511	interrupt status:
512	PORT_IRQ_STAT = 0x0
513	PORT_IRQ_MASK = 0x0
514	HOST_IRQ_STAT = 0x0
515	[6093] ahci_stop_port 0.1
516	[6093] ahci_reset_port: setting link speed and power management options
517	[6093] ahci_reset_port: issuing COMRESET on port 1
518	[6095] Wait for communication...
519	[6125] ahci_reset_port: starting port 1 again
520	[6125] ahci_start_port 0.1
521	[6125] ahci_start_port: PORT_SCR_STAT = 0x113
522	[6125] ahci_start_port: PORT_SCR_ERR = 0x0
523	[6125] ahci_reset_port: PORT_TFDATA = 0x100
524	[6125] ATA command for 0.1.0, slot 0:
525	[6125] cmd_hdr: 0748:7800 25 00 01 00 00 00 00 00-00 3d f0 00 00 00 00 00 %........=......
526	[6125] ata_cmd: 1530:4c16 05 00 00 00 00 00 00 00-00 00 a0 00 ............
527	[6125] atapi_cmd: 1530:4c94 12 00 00 00 2c 00 00 00-00 00 00 00 ....,.......
528	[6125] sg_list: 0748:7d80 ca 95 db 00 00 00 00 00-00 00 00 00 2b 00 00 00 ............+...
529	[6125] executing polled cmd on slot 0...[6156]
530	[6156] ahci_stop_port 0.1
531	[6156] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
532	[6156] IORB 0890:84b8 removed (queue = 0728:5b8a)
533	[6156] IORB 0890:84b8 complete (status = 0x0001, error = 0x0000)
534	[6156] IORB 0890:84b8 queued (cmd = 8/2, queue = 0728:5b8a [port], timeout = 10)
535	[6156] ahci_execute_cdb(0.1.0): 0890:853c 1a 00 2a 00 26 00 ..*.&.
536	[6156] ahci_reset_port: resetting port 0.1
537	[6156] AHCI port 1 registers:
538	PORT_CMD = 0x42006
539	command engine status:
540	PORT_SCR_ACT = 0x0
541	PORT_CMD_ISSUE = 0x0
542	link/device status:
543	PORT_SCR_STAT = 0x113
544	PORT_SCR_CTL = 0x0
545	PORT_SCR_ERR = 0x0
546	PORT_TFDATA = 0x50
547	interrupt status:
548	PORT_IRQ_STAT = 0x0
549	PORT_IRQ_MASK = 0x0
550	HOST_IRQ_STAT = 0x0
551	[6156] ahci_stop_port 0.1
552	[6156] ahci_reset_port: setting link speed and power management options
553	[6156] ahci_reset_port: issuing COMRESET on port 1
554	[6158] Wait for communication...
555	[6187] ahci_reset_port: starting port 1 again
556	[6187] ahci_start_port 0.1
557	[6187] ahci_start_port: PORT_SCR_STAT = 0x113
558	[6187] ahci_start_port: PORT_SCR_ERR = 0x0
559	[6187] ahci_reset_port: PORT_TFDATA = 0x100
560	[6187] ATA command for 0.1.0, slot 0:
561	[6187] cmd_hdr: 0748:7800 25 00 01 00 00 00 00 00-00 3d f0 00 00 00 00 00 %........=......
562	[6187] ata_cmd: 1530:4c22 05 00 00 00 00 00 00 00-00 00 a0 00 ............
563	[6187] atapi_cmd: 1530:4ca0 1a 00 2a 00 26 00 00 00-00 00 00 00 ..*.&.......
564	[6187] sg_list: 0748:7d80 2c 92 db 00 00 00 00 00-00 00 00 00 7f 00 00 00 ,..............
565	[6187] executing polled cmd on slot 0...[16187] timeout for IORB 0890:84b8[16187]
566	[16187] ahci_stop_port 0.1
567	[16187] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
568	[16187] IORB 0890:84b8 removed (queue = 0728:5b8a)
569	[16187] IORB 0890:84b8 complete (status = 0x0003, error = 0x8506)
570	[16187] IORB 0890:84b8 queued (cmd = 8/2, queue = 0728:5b8a [port], timeout = 10)
571	[16187] ahci_execute_cdb(0.1.0): 0890:853c 5a 00 2a 00 00 00 00 00-26 00 Z.*.....&.
572	[16187] ahci_reset_port: resetting port 0.1
573	[16187] AHCI port 1 registers:
574	PORT_CMD = 0x42006
575	command engine status:
576	PORT_SCR_ACT = 0x0
577	PORT_CMD_ISSUE = 0x0
578	link/device status:
579	PORT_SCR_STAT = 0x113
580	PORT_SCR_CTL = 0x0
581	PORT_SCR_ERR = 0x800
582	PORT_TFDATA = 0x5451
583	interrupt status:
584	PORT_IRQ_STAT = 0x0
585	PORT_IRQ_MASK = 0x0
586	HOST_IRQ_STAT = 0x0
587	[16187] ahci_stop_port 0.1
588	[16187] ahci_reset_port: setting link speed and power management options
589	[16187] ahci_reset_port: issuing COMRESET on port 1
590	[16189] Wait for communication...
591	[16218] ahci_reset_port: starting port 1 again
592	[16218] ahci_start_port 0.1
593	[16218] ahci_start_port: PORT_SCR_STAT = 0x113
594	[16218] ahci_start_port: PORT_SCR_ERR = 0x0
595	[16218] ahci_reset_port: PORT_TFDATA = 0x100
596	[16218] ATA command for 0.1.0, slot 0:
597	[16218] cmd_hdr: 0748:7800 25 00 01 00 00 00 00 00-00 3d f0 00 00 00 00 00 %........=......
598	[16218] ata_cmd: 1530:4c22 05 00 00 00 00 00 00 00-00 00 a0 00 ............
599	[16218] atapi_cmd: 1530:4ca0 5a 00 2a 00 00 00 00 00-26 00 00 00 Z.*.....&...
600	[16218] sg_list: 0748:7d80 2c 92 db 00 00 00 00 00-00 00 00 00 7f 00 00 00 ,..............
601	[16218] executing polled cmd on slot 0...[26218] timeout for IORB 0890:84b8[26218]
602	[26218] ahci_stop_port 0.1
603	[26218] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
604	[26218] IORB 0890:84b8 removed (queue = 0728:5b8a)
605	[26218] IORB 0890:84b8 complete (status = 0x0003, error = 0x8506)
606	[26218] IORB 0890:84b8 queued (cmd = 2/2, queue = 0728:5b8a [port], timeout = 10)
607	[26218] IORB 0890:84b8 removed (queue = 0728:5b8a)
608	[26218] IORB 0890:84b8 complete (status = 0x0001, error = 0x0000)
609	[26593] IORB 08a0:c56c queued (cmd = 1/1, queue = 0728:59ca [driver], timeout = 0)
610	[26593] IORB 08a0:c56c removed (queue = 0728:59ca)
611	[26593] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
612	[26593] IORB 08a0:c56c queued (cmd = 2/1, queue = 0728:5ae8 [port], timeout = 0)
613	[26593] IORB 08a0:c56c removed (queue = 0728:5ae8)
614	[26593] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
615	[26593] IORB 08a0:c56c queued (cmd = 2/1, queue = 0728:5c2c [port], timeout = 0)
616	[26593] IORB 08a0:c56c removed (queue = 0728:5c2c)
617	[26593] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
618	[26593] IORB 08a0:c56c queued (cmd = 3/3, queue = 0728:5ae8 [port], timeout = 0)
619	[26593] ahci_get_geometry(0.0.0)
620	[26593] ahci_reset_port: resetting port 0.0
621	[26593] AHCI port 0 registers:
622	PORT_CMD = 0x42006
623	command engine status:
624	PORT_SCR_ACT = 0x0
625	PORT_CMD_ISSUE = 0x0
626	link/device status:
627	PORT_SCR_STAT = 0x123
628	PORT_SCR_CTL = 0x0
629	PORT_SCR_ERR = 0x0
630	PORT_TFDATA = 0x50
631	interrupt status:
632	PORT_IRQ_STAT = 0x0
633	PORT_IRQ_MASK = 0x0
634	HOST_IRQ_STAT = 0x0
635	[26593] ahci_stop_port 0.0
636	[26593] ahci_reset_port: setting link speed and power management options
637	[26593] ahci_reset_port: issuing COMRESET on port 0
638	[26595] Wait for communication...
639	[26625] ahci_reset_port: starting port 0 again
640	[26625] ahci_start_port 0.0
641	[26625] ahci_start_port: PORT_SCR_STAT = 0x123
642	[26625] ahci_start_port: PORT_SCR_ERR = 0x0
643	[26625] ahci_reset_port: PORT_TFDATA = 0x150
644	[26625] ATA command for 0.0.0, slot 0:
645	[26625] cmd_hdr: 0748:0000 05 00 01 00 00 00 00 00-00 c5 ef 00 00 00 00 00 ................
646	[26625] ata_cmd: 1530:4ccc 00 00 00 00 00 00 00 00-00 00 ec 00 ............
647	[26625] sg_list: 0748:0580 2a 1f f9 00 00 00 00 00-00 00 00 00 ff 01 00 00 *...............
648	[26625] executing polled cmd on slot 0...[26656] Physical geometry: 16383 cylinders, 16 heads, 63 sectors per track (76319MB) (BIOS)
649	[26656] Logical geometry: 9729 cylinders, 255 heads, 63 sectors per track (76316MB) (BIOS)
650	[26656] is_lvm_geometry (0.0.0)
651	[26656] ATA command for 0.0.0, slot 0:
652	[26656] cmd_hdr: 0748:0000 05 00 01 00 00 00 00 00-00 c5 ef 00 00 00 00 00 ................
653	[26656] ata_cmd: 1530:4c86 00 00 01 00 3e 00 00 00-00 00 c8 40 ....>......@
654	[26656] sg_list: 0748:0580 2a 1f f9 00 00 00 00 00-00 00 00 00 ff 01 00 00 *...............
655	[26656] executing polled cmd...[26687] success
656	[26687] DLA sector 62:
657	0728:2f2a 02 52 4d 42 50 4d 46 44-0a 95 6a 0e ba 41 1f dc .RMBPMFD..j..A..
658	0728:2f3a 60 ca 77 2b 00 00 00 00-01 26 00 00 ff 00 00 00 `.w+.....&......
659	0728:2f4a 3f 00 00 00 5b 20 53 41-54 41 20 31 20 5d 00 00 ?...[ SATA 1 ]..
660	0728:2f5a 00 00 00 00 00 00 00 00-00 00 00 00 ............
661	[26687] is_lvm_geometry found at sector 62
662	[26687] Reported geometry: 9729 cylinders, 255 heads, 63 sectors per track (76316MB) (LVM)
663	[26687]
664	[26687] ahci_stop_port 0.0
665	[26687] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
666	[26687] IORB 08a0:c56c removed (queue = 0728:5ae8)
667	[26687] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
668	[26687] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5ae8 [port], timeout = 0)
669	[26687] ahci_read(0.0.0, 0, 1)
670	[26687] ahci_reset_port: resetting port 0.0
671	[26687] AHCI port 0 registers:
672	PORT_CMD = 0x42006
673	command engine status:
674	PORT_SCR_ACT = 0x0
675	PORT_CMD_ISSUE = 0x0
676	link/device status:
677	PORT_SCR_STAT = 0x123
678	PORT_SCR_CTL = 0x0
679	PORT_SCR_ERR = 0x0
680	PORT_TFDATA = 0x50
681	interrupt status:
682	PORT_IRQ_STAT = 0x0
683	PORT_IRQ_MASK = 0x0
684	HOST_IRQ_STAT = 0x0
685	[26687] ahci_stop_port 0.0
686	[26687] ahci_reset_port: setting link speed and power management options
687	[26687] ahci_reset_port: issuing COMRESET on port 0
688	[26689] Wait for communication...
689	[26718] ahci_reset_port: starting port 0 again
690	[26718] ahci_start_port 0.0
691	[26718] ahci_start_port: PORT_SCR_STAT = 0x123
692	[26718] ahci_start_port: PORT_SCR_ERR = 0x0
693	[26718] ahci_reset_port: PORT_TFDATA = 0x150
694	[26718] ATA command for 0.0.0, slot 0:
695	[26718] cmd_hdr: 0748:0000 05 00 01 00 00 00 00 00-00 c5 ef 00 00 00 00 00 ................
696	[26718] ata_cmd: 1530:4a28 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@
697	[26718] sg_list: 0748:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
698	[26718] executing polled cmd on slot 0...[26750] ata_read_pp(): blocks transferred = 1
699	[26750]
700	[26750] ahci_stop_port 0.0
701	[26750] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
702	[26750] IORB 08a0:c56c removed (queue = 0728:5ae8)
703	[26750] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
704	[26750] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5ae8 [port], timeout = 0)
705	[26750] ahci_read(0.0.0, 62, 1)
706	[26750] ahci_reset_port: resetting port 0.0
707	[26750] AHCI port 0 registers:
708	PORT_CMD = 0x42006
709	command engine status:
710	PORT_SCR_ACT = 0x0
711	PORT_CMD_ISSUE = 0x0
712	link/device status:
713	PORT_SCR_STAT = 0x123
714	PORT_SCR_CTL = 0x0
715	PORT_SCR_ERR = 0x0
716	PORT_TFDATA = 0x50
717	interrupt status:
718	PORT_IRQ_STAT = 0x0
719	PORT_IRQ_MASK = 0x0
720	HOST_IRQ_STAT = 0x0
721	[26750] ahci_stop_port 0.0
722	[26750] ahci_reset_port: setting link speed and power management options
723	[26750] ahci_reset_port: issuing COMRESET on port 0
724	[26751] Wait for communication...
725	[26781] ahci_reset_port: starting port 0 again
726	[26781] ahci_start_port 0.0
727	[26781] ahci_start_port: PORT_SCR_STAT = 0x123
728	[26781] ahci_start_port: PORT_SCR_ERR = 0x0
729	[26781] ahci_reset_port: PORT_TFDATA = 0x150
730	[26781] ATA command for 0.0.0, slot 0:
731	[26781] cmd_hdr: 0748:0000 05 00 01 00 00 00 00 00-00 c5 ef 00 00 00 00 00 ................
732	[26781] ata_cmd: 1530:47f2 00 00 01 00 3e 00 00 00-00 00 c8 40 ....>......@
733	[26781] sg_list: 0748:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
734	[26781] executing polled cmd on slot 0...[26812] ata_read_pp(): blocks transferred = 1
735	[26812]
736	[26812] ahci_stop_port 0.0
737	[26812] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
738	[26812] IORB 08a0:c56c removed (queue = 0728:5ae8)
739	[26812] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
740	[26812] IORB 08a0:c56c queued (cmd = 3/3, queue = 0728:5c2c [port], timeout = 0)
741	[26812] ahci_get_geometry(0.2.0)
742	[26812] ahci_reset_port: resetting port 0.2
743	[26812] AHCI port 2 registers:
744	PORT_CMD = 0x42006
745	command engine status:
746	PORT_SCR_ACT = 0x0
747	PORT_CMD_ISSUE = 0x0
748	link/device status:
749	PORT_SCR_STAT = 0x123
750	PORT_SCR_CTL = 0x0
751	PORT_SCR_ERR = 0x0
752	PORT_TFDATA = 0x50
753	interrupt status:
754	PORT_IRQ_STAT = 0x0
755	PORT_IRQ_MASK = 0x0
756	HOST_IRQ_STAT = 0x0
757	[26812] ahci_stop_port 0.2
758	[26812] ahci_reset_port: setting link speed and power management options
759	[26812] ahci_reset_port: issuing COMRESET on port 2
760	[26814] Wait for communication...
761	[26843] ahci_reset_port: starting port 2 again
762	[26843] ahci_start_port 0.2
763	[26843] ahci_start_port: PORT_SCR_STAT = 0x123
764	[26843] ahci_start_port: PORT_SCR_ERR = 0x0
765	[26843] ahci_reset_port: PORT_TFDATA = 0x150
766	[26843] ATA command for 0.2.0, slot 0:
767	[26843] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
768	[26843] ata_cmd: 1530:4ccc 00 00 00 00 00 00 00 00-00 00 ec 00 ............
769	[26843] sg_list: 0750:0580 2a 1f f9 00 00 00 00 00-00 00 00 00 ff 01 00 00 *...............
770	[26843] executing polled cmd on slot 0...[26875] Physical geometry: 16383 cylinders, 16 heads, 63 sectors per track (953869MB) (BIOS)
771	[26875] Logical geometry: 60321 cylinders, 255 heads, 127 sectors per track (953855MB) (BIOS)
772	[26875] is_lvm_geometry (0.2.0)
773	[26875] ATA command for 0.2.0, slot 0:
774	[26875] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
775	[26875] ata_cmd: 1530:4c86 00 00 01 00 7e 00 00 00-00 00 c8 40 ....~......@
776	[26875] sg_list: 0750:0580 2a 1f f9 00 00 00 00 00-00 00 00 00 ff 01 00 00 *...............
777	[26875] executing polled cmd...[26906] success
778	[26906] DLA sector 126:
779	0728:2f2a 02 52 4d 42 50 4d 46 44-12 86 c5 20 60 ca 77 2b .RMBPMFD... `.w+
780	0728:2f3a 60 ca 77 2b 00 00 00 00-a1 eb 00 00 ff 00 00 00 `.w+............
781	0728:2f4a 7f 00 00 00 5b 20 53 41-54 41 20 32 20 5d 00 00 ...[ SATA 2 ]..
782	0728:2f5a 00 00 00 00 00 00 00 00-00 00 00 00 ............
783	[26906] is_lvm_geometry found at sector 126
784	[26906] Reported geometry: 60321 cylinders, 255 heads, 127 sectors per track (953855MB) (LVM)
785	[26906]
786	[26906] ahci_stop_port 0.2
787	[26906] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
788	[26906] IORB 08a0:c56c removed (queue = 0728:5c2c)
789	[26906] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
790	[26906] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
791	[26906] ahci_read(0.2.0, 0, 1)
792	[26906] ahci_reset_port: resetting port 0.2
793	[26906] AHCI port 2 registers:
794	PORT_CMD = 0x42006
795	command engine status:
796	PORT_SCR_ACT = 0x0
797	PORT_CMD_ISSUE = 0x0
798	link/device status:
799	PORT_SCR_STAT = 0x123
800	PORT_SCR_CTL = 0x0
801	PORT_SCR_ERR = 0x0
802	PORT_TFDATA = 0x50
803	interrupt status:
804	PORT_IRQ_STAT = 0x0
805	PORT_IRQ_MASK = 0x0
806	HOST_IRQ_STAT = 0x0
807	[26906] ahci_stop_port 0.2
808	[26906] ahci_reset_port: setting link speed and power management options
809	[26906] ahci_reset_port: issuing COMRESET on port 2
810	[26908] Wait for communication...
811	[26937] ahci_reset_port: starting port 2 again
812	[26937] ahci_start_port 0.2
813	[26937] ahci_start_port: PORT_SCR_STAT = 0x123
814	[26937] ahci_start_port: PORT_SCR_ERR = 0x0
815	[26937] ahci_reset_port: PORT_TFDATA = 0x150
816	[26937] ATA command for 0.2.0, slot 0:
817	[26937] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
818	[26937] ata_cmd: 1530:4a28 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@
819	[26937] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
820	[26937] executing polled cmd on slot 0...[26968] ata_read_pp(): blocks transferred = 1
821	[26968]
822	[26968] ahci_stop_port 0.2
823	[26968] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
824	[26968] IORB 08a0:c56c removed (queue = 0728:5c2c)
825	[26968] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
826	[26968] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
827	[26968] ahci_read(0.2.0, 126, 1)
828	[26968] ahci_reset_port: resetting port 0.2
829	[26968] AHCI port 2 registers:
830	PORT_CMD = 0x42006
831	command engine status:
832	PORT_SCR_ACT = 0x0
833	PORT_CMD_ISSUE = 0x0
834	link/device status:
835	PORT_SCR_STAT = 0x123
836	PORT_SCR_CTL = 0x0
837	PORT_SCR_ERR = 0x0
838	PORT_TFDATA = 0x50
839	interrupt status:
840	PORT_IRQ_STAT = 0x0
841	PORT_IRQ_MASK = 0x0
842	HOST_IRQ_STAT = 0x0
843	[26968] ahci_stop_port 0.2
844	[26968] ahci_reset_port: setting link speed and power management options
845	[26968] ahci_reset_port: issuing COMRESET on port 2
846	[26970] Wait for communication...
847	[27000] ahci_reset_port: starting port 2 again
848	[27000] ahci_start_port 0.2
849	[27000] ahci_start_port: PORT_SCR_STAT = 0x123
850	[27000] ahci_start_port: PORT_SCR_ERR = 0x0
851	[27000] ahci_reset_port: PORT_TFDATA = 0x150
852	[27000] ATA command for 0.2.0, slot 0:
853	[27000] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
854	[27000] ata_cmd: 1530:47f2 00 00 01 00 7e 00 00 00-00 00 c8 40 ....~......@
855	[27000] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
856	[27000] executing polled cmd on slot 0...[27031] ata_read_pp(): blocks transferred = 1
857	[27031]
858	[27031] ahci_stop_port 0.2
859	[27031] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
860	[27031] IORB 08a0:c56c removed (queue = 0728:5c2c)
861	[27031] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
862	[27031] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5ae8 [port], timeout = 0)
863	[27031] ahci_read(0.0.0, 62, 1)
864	[27031] ahci_reset_port: resetting port 0.0
865	[27031] AHCI port 0 registers:
866	PORT_CMD = 0x42006
867	command engine status:
868	PORT_SCR_ACT = 0x0
869	PORT_CMD_ISSUE = 0x0
870	link/device status:
871	PORT_SCR_STAT = 0x123
872	PORT_SCR_CTL = 0x0
873	PORT_SCR_ERR = 0x0
874	PORT_TFDATA = 0x50
875	interrupt status:
876	PORT_IRQ_STAT = 0x0
877	PORT_IRQ_MASK = 0x0
878	HOST_IRQ_STAT = 0x0
879	[27031] ahci_stop_port 0.0
880	[27031] ahci_reset_port: setting link speed and power management options
881	[27031] ahci_reset_port: issuing COMRESET on port 0
882	[27033] Wait for communication...
883	[27062] ahci_reset_port: starting port 0 again
884	[27062] ahci_start_port 0.0
885	[27062] ahci_start_port: PORT_SCR_STAT = 0x123
886	[27062] ahci_start_port: PORT_SCR_ERR = 0x0
887	[27062] ahci_reset_port: PORT_TFDATA = 0x150
888	[27062] ATA command for 0.0.0, slot 0:
889	[27062] cmd_hdr: 0748:0000 05 00 01 00 00 00 00 00-00 c5 ef 00 00 00 00 00 ................
890	[27062] ata_cmd: 1530:4c26 00 00 01 00 3e 00 00 00-00 00 c8 40 ....>......@
891	[27062] sg_list: 0748:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
892	[27062] executing polled cmd on slot 0...[27093] ata_read_pp(): blocks transferred = 1
893	[27093]
894	[27093] ahci_stop_port 0.0
895	[27093] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
896	[27093] IORB 08a0:c56c removed (queue = 0728:5ae8)
897	[27093] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
898	[27093] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5ae8 [port], timeout = 0)
899	[27093] ahci_read(0.0.0, 0, 1)
900	[27093] ahci_reset_port: resetting port 0.0
901	[27093] AHCI port 0 registers:
902	PORT_CMD = 0x42006
903	command engine status:
904	PORT_SCR_ACT = 0x0
905	PORT_CMD_ISSUE = 0x0
906	link/device status:
907	PORT_SCR_STAT = 0x123
908	PORT_SCR_CTL = 0x0
909	PORT_SCR_ERR = 0x0
910	PORT_TFDATA = 0x50
911	interrupt status:
912	PORT_IRQ_STAT = 0x0
913	PORT_IRQ_MASK = 0x0
914	HOST_IRQ_STAT = 0x0
915	[27093] ahci_stop_port 0.0
916	[27093] ahci_reset_port: setting link speed and power management options
917	[27093] ahci_reset_port: issuing COMRESET on port 0
918	[27095] Wait for communication...
919	[27125] ahci_reset_port: starting port 0 again
920	[27125] ahci_start_port 0.0
921	[27125] ahci_start_port: PORT_SCR_STAT = 0x123
922	[27125] ahci_start_port: PORT_SCR_ERR = 0x0
923	[27125] ahci_reset_port: PORT_TFDATA = 0x150
924	[27125] ATA command for 0.0.0, slot 0:
925	[27125] cmd_hdr: 0748:0000 05 00 01 00 00 00 00 00-00 c5 ef 00 00 00 00 00 ................
926	[27125] ata_cmd: 1530:4c2c 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@
927	[27125] sg_list: 0748:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
928	[27125] executing polled cmd on slot 0...[27156] ata_read_pp(): blocks transferred = 1
929	[27156]
930	[27156] ahci_stop_port 0.0
931	[27156] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
932	[27156] IORB 08a0:c56c removed (queue = 0728:5ae8)
933	[27156] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
934	[27156] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5ae8 [port], timeout = 0)
935	[27156] ahci_read(0.0.0, 63, 1)
936	[27156] ahci_reset_port: resetting port 0.0
937	[27156] AHCI port 0 registers:
938	PORT_CMD = 0x42006
939	command engine status:
940	PORT_SCR_ACT = 0x0
941	PORT_CMD_ISSUE = 0x0
942	link/device status:
943	PORT_SCR_STAT = 0x123
944	PORT_SCR_CTL = 0x0
945	PORT_SCR_ERR = 0x0
946	PORT_TFDATA = 0x50
947	interrupt status:
948	PORT_IRQ_STAT = 0x0
949	PORT_IRQ_MASK = 0x0
950	HOST_IRQ_STAT = 0x0
951	[27156] ahci_stop_port 0.0
952	[27156] ahci_reset_port: setting link speed and power management options
953	[27156] ahci_reset_port: issuing COMRESET on port 0
954	[27158] Wait for communication...
955	[27187] ahci_reset_port: starting port 0 again
956	[27187] ahci_start_port 0.0
957	[27187] ahci_start_port: PORT_SCR_STAT = 0x123
958	[27187] ahci_start_port: PORT_SCR_ERR = 0x0
959	[27187] ahci_reset_port: PORT_TFDATA = 0x150
960	[27187] ATA command for 0.0.0, slot 0:
961	[27187] cmd_hdr: 0748:0000 05 00 01 00 00 00 00 00-00 c5 ef 00 00 00 00 00 ................
962	[27187] ata_cmd: 1530:4c24 00 00 01 00 3f 00 00 00-00 00 c8 40 ....?......@
963	[27187] sg_list: 0748:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
964	[27187] executing polled cmd on slot 0...[27218] ata_read_pp(): blocks transferred = 1
965	[27218]
966	[27218] ahci_stop_port 0.0
967	[27218] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
968	[27218] IORB 08a0:c56c removed (queue = 0728:5ae8)
969	[27218] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
970	[27218] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
971	[27218] ahci_read(0.2.0, 126, 1)
972	[27218] ahci_reset_port: resetting port 0.2
973	[27218] AHCI port 2 registers:
974	PORT_CMD = 0x42006
975	command engine status:
976	PORT_SCR_ACT = 0x0
977	PORT_CMD_ISSUE = 0x0
978	link/device status:
979	PORT_SCR_STAT = 0x123
980	PORT_SCR_CTL = 0x0
981	PORT_SCR_ERR = 0x0
982	PORT_TFDATA = 0x50
983	interrupt status:
984	PORT_IRQ_STAT = 0x0
985	PORT_IRQ_MASK = 0x0
986	HOST_IRQ_STAT = 0x0
987	[27218] ahci_stop_port 0.2
988	[27218] ahci_reset_port: setting link speed and power management options
989	[27218] ahci_reset_port: issuing COMRESET on port 2
990	[27220] Wait for communication...
991	[27250] ahci_reset_port: starting port 2 again
992	[27250] ahci_start_port 0.2
993	[27250] ahci_start_port: PORT_SCR_STAT = 0x123
994	[27250] ahci_start_port: PORT_SCR_ERR = 0x0
995	[27250] ahci_reset_port: PORT_TFDATA = 0x150
996	[27250] ATA command for 0.2.0, slot 0:
997	[27250] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
998	[27250] ata_cmd: 1530:4c26 00 00 01 00 7e 00 00 00-00 00 c8 40 ....~......@
999	[27250] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
1000	[27250] executing polled cmd on slot 0...[27281] ata_read_pp(): blocks transferred = 1
1001	[27281]
1002	[27281] ahci_stop_port 0.2
1003	[27281] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
1004	[27281] IORB 08a0:c56c removed (queue = 0728:5c2c)
1005	[27281] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
1006	[27281] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
1007	[27281] ahci_read(0.2.0, 0, 1)
1008	[27281] ahci_reset_port: resetting port 0.2
1009	[27281] AHCI port 2 registers:
1010	PORT_CMD = 0x42006
1011	command engine status:
1012	PORT_SCR_ACT = 0x0
1013	PORT_CMD_ISSUE = 0x0
1014	link/device status:
1015	PORT_SCR_STAT = 0x123
1016	PORT_SCR_CTL = 0x0
1017	PORT_SCR_ERR = 0x0
1018	PORT_TFDATA = 0x50
1019	interrupt status:
1020	PORT_IRQ_STAT = 0x0
1021	PORT_IRQ_MASK = 0x0
1022	HOST_IRQ_STAT = 0x0
1023	[27281] ahci_stop_port 0.2
1024	[27281] ahci_reset_port: setting link speed and power management options
1025	[27281] ahci_reset_port: issuing COMRESET on port 2
1026	[27283] Wait for communication...
1027	[27312] ahci_reset_port: starting port 2 again
1028	[27312] ahci_start_port 0.2
1029	[27312] ahci_start_port: PORT_SCR_STAT = 0x123
1030	[27312] ahci_start_port: PORT_SCR_ERR = 0x0
1031	[27312] ahci_reset_port: PORT_TFDATA = 0x150
1032	[27312] ATA command for 0.2.0, slot 0:
1033	[27312] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
1034	[27312] ata_cmd: 1530:4c2c 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@
1035	[27312] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
1036	[27312] executing polled cmd on slot 0...[27343] ata_read_pp(): blocks transferred = 1
1037	[27343]
1038	[27343] ahci_stop_port 0.2
1039	[27343] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
1040	[27343] IORB 08a0:c56c removed (queue = 0728:5c2c)
1041	[27343] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
1042	[27343] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
1043	[27343] ahci_read(0.2.0, 204802866, 1)
1044	[27343] ahci_reset_port: resetting port 0.2
1045	[27343] AHCI port 2 registers:
1046	PORT_CMD = 0x42006
1047	command engine status:
1048	PORT_SCR_ACT = 0x0
1049	PORT_CMD_ISSUE = 0x0
1050	link/device status:
1051	PORT_SCR_STAT = 0x123
1052	PORT_SCR_CTL = 0x0
1053	PORT_SCR_ERR = 0x0
1054	PORT_TFDATA = 0x50
1055	interrupt status:
1056	PORT_IRQ_STAT = 0x0
1057	PORT_IRQ_MASK = 0x0
1058	HOST_IRQ_STAT = 0x0
1059	[27343] ahci_stop_port 0.2
1060	[27343] ahci_reset_port: setting link speed and power management options
1061	[27343] ahci_reset_port: issuing COMRESET on port 2
1062	[27345] Wait for communication...
1063	[27375] ahci_reset_port: starting port 2 again
1064	[27375] ahci_start_port 0.2
1065	[27375] ahci_start_port: PORT_SCR_STAT = 0x123
1066	[27375] ahci_start_port: PORT_SCR_ERR = 0x0
1067	[27375] ahci_reset_port: PORT_TFDATA = 0x150
1068	[27375] ATA command for 0.2.0, slot 0:
1069	[27375] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
1070	[27375] ata_cmd: 1530:4c04 00 00 01 00 32 0b 35 00-00 00 c8 4c ....2.5....L
1071	[27375] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
1072	[27375] executing polled cmd on slot 0...[27406] ata_read_pp(): blocks transferred = 1
1073	[27406]
1074	[27406] ahci_stop_port 0.2
1075	[27406] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
1076	[27406] IORB 08a0:c56c removed (queue = 0728:5c2c)
1077	[27406] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
1078	[27406] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
1079	[27406] ahci_read(0.2.0, 204802740, 1)
1080	[27406] ahci_reset_port: resetting port 0.2
1081	[27406] AHCI port 2 registers:
1082	PORT_CMD = 0x42006
1083	command engine status:
1084	PORT_SCR_ACT = 0x0
1085	PORT_CMD_ISSUE = 0x0
1086	link/device status:
1087	PORT_SCR_STAT = 0x123
1088	PORT_SCR_CTL = 0x0
1089	PORT_SCR_ERR = 0x0
1090	PORT_TFDATA = 0x50
1091	interrupt status:
1092	PORT_IRQ_STAT = 0x0
1093	PORT_IRQ_MASK = 0x0
1094	HOST_IRQ_STAT = 0x0
1095	[27406] ahci_stop_port 0.2
1096	[27406] ahci_reset_port: setting link speed and power management options
1097	[27406] ahci_reset_port: issuing COMRESET on port 2
1098	[27408] Wait for communication...
1099	[27437] ahci_reset_port: starting port 2 again
1100	[27437] ahci_start_port 0.2
1101	[27437] ahci_start_port: PORT_SCR_STAT = 0x123
1102	[27437] ahci_start_port: PORT_SCR_ERR = 0x0
1103	[27437] ahci_reset_port: PORT_TFDATA = 0x150
1104	[27437] ATA command for 0.2.0, slot 0:
1105	[27437] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
1106	[27437] ata_cmd: 1530:4c0a 00 00 01 00 b4 0a 35 00-00 00 c8 4c ......5....L
1107	[27437] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
1108	[27437] executing polled cmd on slot 0...[27468] ata_read_pp(): blocks transferred = 1
1109	[27468]
1110	[27468] ahci_stop_port 0.2
1111	[27468] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
1112	[27468] IORB 08a0:c56c removed (queue = 0728:5c2c)
1113	[27468] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
1114	[27468] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
1115	[27468] ahci_read(0.2.0, 204802867, 1)
1116	[27468] ahci_reset_port: resetting port 0.2
1117	[27468] AHCI port 2 registers:
1118	PORT_CMD = 0x42006
1119	command engine status:
1120	PORT_SCR_ACT = 0x0
1121	PORT_CMD_ISSUE = 0x0
1122	link/device status:
1123	PORT_SCR_STAT = 0x123
1124	PORT_SCR_CTL = 0x0
1125	PORT_SCR_ERR = 0x0
1126	PORT_TFDATA = 0x50
1127	interrupt status:
1128	PORT_IRQ_STAT = 0x0
1129	PORT_IRQ_MASK = 0x0
1130	HOST_IRQ_STAT = 0x0
1131	[27468] ahci_stop_port 0.2
1132	[27468] ahci_reset_port: setting link speed and power management options
1133	[27468] ahci_reset_port: issuing COMRESET on port 2
1134	[27470] Wait for communication...
1135	[27500] ahci_reset_port: starting port 2 again
1136	[27500] ahci_start_port 0.2
1137	[27500] ahci_start_port: PORT_SCR_STAT = 0x123
1138	[27500] ahci_start_port: PORT_SCR_ERR = 0x0
1139	[27500] ahci_reset_port: PORT_TFDATA = 0x150
1140	[27500] ATA command for 0.2.0, slot 0:
1141	[27500] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
1142	[27500] ata_cmd: 1530:4c02 00 00 01 00 33 0b 35 00-00 00 c8 4c ....3.5....L
1143	[27500] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
1144	[27500] executing polled cmd on slot 0...[27531] ata_read_pp(): blocks transferred = 1
1145	[27531]
1146	[27531] ahci_stop_port 0.2
1147	[27531] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
1148	[27531] IORB 08a0:c56c removed (queue = 0728:5c2c)
1149	[27531] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
1150	[27531] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
1151	[27531] ahci_read(0.2.0, 409637991, 1)
1152	[27531] ahci_reset_port: resetting port 0.2
1153	[27531] AHCI port 2 registers:
1154	PORT_CMD = 0x42006
1155	command engine status:
1156	PORT_SCR_ACT = 0x0
1157	PORT_CMD_ISSUE = 0x0
1158	link/device status:
1159	PORT_SCR_STAT = 0x123
1160	PORT_SCR_CTL = 0x0
1161	PORT_SCR_ERR = 0x0
1162	PORT_TFDATA = 0x50
1163	interrupt status:
1164	PORT_IRQ_STAT = 0x0
1165	PORT_IRQ_MASK = 0x0
1166	HOST_IRQ_STAT = 0x0
1167	[27531] ahci_stop_port 0.2
1168	[27531] ahci_reset_port: setting link speed and power management options
1169	[27531] ahci_reset_port: issuing COMRESET on port 2
1170	[27533] Wait for communication...
1171	[27562] ahci_reset_port: starting port 2 again
1172	[27562] ahci_start_port 0.2
1173	[27562] ahci_start_port: PORT_SCR_STAT = 0x123
1174	[27562] ahci_start_port: PORT_SCR_ERR = 0x0
1175	[27562] ahci_reset_port: PORT_TFDATA = 0x150
1176	[27562] ATA command for 0.2.0, slot 0:
1177	[27562] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
1178	[27562] ata_cmd: 1530:4c02 00 00 01 00 67 94 6a 18-00 00 25 40 ....g.j...%@
1179	[27562] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
1180	[27562] executing polled cmd on slot 0...[27593] ata_read_pp(): blocks transferred = 1
1181	[27593]
1182	[27593] ahci_stop_port 0.2
1183	[27593] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
1184	[27593] IORB 08a0:c56c removed (queue = 0728:5c2c)
1185	[27593] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
1186	[27593] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
1187	[27593] ahci_read(0.2.0, 409637865, 1)
1188	[27593] ahci_reset_port: resetting port 0.2
1189	[27593] AHCI port 2 registers:
1190	PORT_CMD = 0x42006
1191	command engine status:
1192	PORT_SCR_ACT = 0x0
1193	PORT_CMD_ISSUE = 0x0
1194	link/device status:
1195	PORT_SCR_STAT = 0x123
1196	PORT_SCR_CTL = 0x0
1197	PORT_SCR_ERR = 0x0
1198	PORT_TFDATA = 0x50
1199	interrupt status:
1200	PORT_IRQ_STAT = 0x0
1201	PORT_IRQ_MASK = 0x0
1202	HOST_IRQ_STAT = 0x0
1203	[27593] ahci_stop_port 0.2
1204	[27593] ahci_reset_port: setting link speed and power management options
1205	[27593] ahci_reset_port: issuing COMRESET on port 2
1206	[27595] Wait for communication...
1207	[27625] ahci_reset_port: starting port 2 again
1208	[27625] ahci_start_port 0.2
1209	[27625] ahci_start_port: PORT_SCR_STAT = 0x123
1210	[27625] ahci_start_port: PORT_SCR_ERR = 0x0
1211	[27625] ahci_reset_port: PORT_TFDATA = 0x150
1212	[27625] ATA command for 0.2.0, slot 0:
1213	[27625] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
1214	[27625] ata_cmd: 1530:4c08 00 00 01 00 e9 93 6a 18-00 00 25 40 ......j...%@
1215	[27625] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
1216	[27625] executing polled cmd on slot 0...[27656] ata_read_pp(): blocks transferred = 1
1217	[27656]
1218	[27656] ahci_stop_port 0.2
1219	[27656] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
1220	[27656] IORB 08a0:c56c removed (queue = 0728:5c2c)
1221	[27656] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
1222	[27656] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
1223	[27656] ahci_read(0.2.0, 409637992, 1)
1224	[27656] ahci_reset_port: resetting port 0.2
1225	[27656] AHCI port 2 registers:
1226	PORT_CMD = 0x42006
1227	command engine status:
1228	PORT_SCR_ACT = 0x0
1229	PORT_CMD_ISSUE = 0x0
1230	link/device status:
1231	PORT_SCR_STAT = 0x123
1232	PORT_SCR_CTL = 0x0
1233	PORT_SCR_ERR = 0x0
1234	PORT_TFDATA = 0x50
1235	interrupt status:
1236	PORT_IRQ_STAT = 0x0
1237	PORT_IRQ_MASK = 0x0
1238	HOST_IRQ_STAT = 0x0
1239	[27656] ahci_stop_port 0.2
1240	[27656] ahci_reset_port: setting link speed and power management options
1241	[27656] ahci_reset_port: issuing COMRESET on port 2
1242	[27658] Wait for communication...
1243	[27687] ahci_reset_port: starting port 2 again
1244	[27687] ahci_start_port 0.2
1245	[27687] ahci_start_port: PORT_SCR_STAT = 0x123
1246	[27687] ahci_start_port: PORT_SCR_ERR = 0x0
1247	[27687] ahci_reset_port: PORT_TFDATA = 0x150
1248	[27687] ATA command for 0.2.0, slot 0:
1249	[27687] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
1250	[27687] ata_cmd: 1530:4c00 00 00 01 00 68 94 6a 18-00 00 25 40 ....h.j...%@
1251	[27687] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
1252	[27687] executing polled cmd on slot 0...[27718] ata_read_pp(): blocks transferred = 1
1253	[27718]
1254	[27718] ahci_stop_port 0.2
1255	[27718] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
1256	[27718] IORB 08a0:c56c removed (queue = 0728:5c2c)
1257	[27718] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
1258	[27718] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
1259	[27718] ahci_read(0.2.0, 410674311, 1)
1260	[27718] ahci_reset_port: resetting port 0.2
1261	[27718] AHCI port 2 registers:
1262	PORT_CMD = 0x42006
1263	command engine status:
1264	PORT_SCR_ACT = 0x0
1265	PORT_CMD_ISSUE = 0x0
1266	link/device status:
1267	PORT_SCR_STAT = 0x123
1268	PORT_SCR_CTL = 0x0
1269	PORT_SCR_ERR = 0x0
1270	PORT_TFDATA = 0x50
1271	interrupt status:
1272	PORT_IRQ_STAT = 0x0
1273	PORT_IRQ_MASK = 0x0
1274	HOST_IRQ_STAT = 0x0
1275	[27718] ahci_stop_port 0.2
1276	[27718] ahci_reset_port: setting link speed and power management options
1277	[27718] ahci_reset_port: issuing COMRESET on port 2
1278	[27720] Wait for communication...
1279	[27750] ahci_reset_port: starting port 2 again
1280	[27750] ahci_start_port 0.2
1281	[27750] ahci_start_port: PORT_SCR_STAT = 0x123
1282	[27750] ahci_start_port: PORT_SCR_ERR = 0x0
1283	[27750] ahci_reset_port: PORT_TFDATA = 0x150
1284	[27750] ATA command for 0.2.0, slot 0:
1285	[27750] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
1286	[27750] ata_cmd: 1530:4c02 00 00 01 00 87 64 7a 18-00 00 25 40 .....dz...%@
1287	[27750] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
1288	[27750] executing polled cmd on slot 0...[27781] ata_read_pp(): blocks transferred = 1
1289	[27781]
1290	[27781] ahci_stop_port 0.2
1291	[27781] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
1292	[27781] IORB 08a0:c56c removed (queue = 0728:5c2c)
1293	[27781] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
1294	[27781] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
1295	[27781] ahci_read(0.2.0, 410674185, 1)
1296	[27781] ahci_reset_port: resetting port 0.2
1297	[27781] AHCI port 2 registers:
1298	PORT_CMD = 0x42006
1299	command engine status:
1300	PORT_SCR_ACT = 0x0
1301	PORT_CMD_ISSUE = 0x0
1302	link/device status:
1303	PORT_SCR_STAT = 0x123
1304	PORT_SCR_CTL = 0x0
1305	PORT_SCR_ERR = 0x0
1306	PORT_TFDATA = 0x50
1307	interrupt status:
1308	PORT_IRQ_STAT = 0x0
1309	PORT_IRQ_MASK = 0x0
1310	HOST_IRQ_STAT = 0x0
1311	[27781] ahci_stop_port 0.2
1312	[27781] ahci_reset_port: setting link speed and power management options
1313	[27781] ahci_reset_port: issuing COMRESET on port 2
1314	[27783] Wait for communication...
1315	[27812] ahci_reset_port: starting port 2 again
1316	[27812] ahci_start_port 0.2
1317	[27812] ahci_start_port: PORT_SCR_STAT = 0x123
1318	[27812] ahci_start_port: PORT_SCR_ERR = 0x0
1319	[27812] ahci_reset_port: PORT_TFDATA = 0x150
1320	[27812] ATA command for 0.2.0, slot 0:
1321	[27812] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
1322	[27812] ata_cmd: 1530:4c08 00 00 01 00 09 64 7a 18-00 00 25 40 .....dz...%@
1323	[27812] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
1324	[27812] executing polled cmd on slot 0...[27843] ata_read_pp(): blocks transferred = 1
1325	[27843]
1326	[27843] ahci_stop_port 0.2
1327	[27843] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
1328	[27843] IORB 08a0:c56c removed (queue = 0728:5c2c)
1329	[27843] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
1330	[27843] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
1331	[27843] ahci_read(0.2.0, 410674312, 1)
1332	[27843] ahci_reset_port: resetting port 0.2
1333	[27843] AHCI port 2 registers:
1334	PORT_CMD = 0x42006
1335	command engine status:
1336	PORT_SCR_ACT = 0x0
1337	PORT_CMD_ISSUE = 0x0
1338	link/device status:
1339	PORT_SCR_STAT = 0x123
1340	PORT_SCR_CTL = 0x0
1341	PORT_SCR_ERR = 0x0
1342	PORT_TFDATA = 0x50
1343	interrupt status:
1344	PORT_IRQ_STAT = 0x0
1345	PORT_IRQ_MASK = 0x0
1346	HOST_IRQ_STAT = 0x0
1347	[27843] ahci_stop_port 0.2
1348	[27843] ahci_reset_port: setting link speed and power management options
1349	[27843] ahci_reset_port: issuing COMRESET on port 2
1350	[27845] Wait for communication...
1351	[27875] ahci_reset_port: starting port 2 again
1352	[27875] ahci_start_port 0.2
1353	[27875] ahci_start_port: PORT_SCR_STAT = 0x123
1354	[27875] ahci_start_port: PORT_SCR_ERR = 0x0
1355	[27875] ahci_reset_port: PORT_TFDATA = 0x150
1356	[27875] ATA command for 0.2.0, slot 0:
1357	[27875] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
1358	[27875] ata_cmd: 1530:4c00 00 00 01 00 88 64 7a 18-00 00 25 40 .....dz...%@
1359	[27875] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
1360	[27875] executing polled cmd on slot 0...[27906] ata_read_pp(): blocks transferred = 1
1361	[27906]
1362	[27906] ahci_stop_port 0.2
1363	[27906] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
1364	[27906] IORB 08a0:c56c removed (queue = 0728:5c2c)
1365	[27906] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
1366	[27906] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
1367	[27906] ahci_read(0.2.0, 411710631, 1)
1368	[27906] ahci_reset_port: resetting port 0.2
1369	[27906] AHCI port 2 registers:
1370	PORT_CMD = 0x42006
1371	command engine status:
1372	PORT_SCR_ACT = 0x0
1373	PORT_CMD_ISSUE = 0x0
1374	link/device status:
1375	PORT_SCR_STAT = 0x123
1376	PORT_SCR_CTL = 0x0
1377	PORT_SCR_ERR = 0x0
1378	PORT_TFDATA = 0x50
1379	interrupt status:
1380	PORT_IRQ_STAT = 0x0
1381	PORT_IRQ_MASK = 0x0
1382	HOST_IRQ_STAT = 0x0
1383	[27906] ahci_stop_port 0.2
1384	[27906] ahci_reset_port: setting link speed and power management options
1385	[27906] ahci_reset_port: issuing COMRESET on port 2
1386	[27908] Wait for communication...
1387	[27937] ahci_reset_port: starting port 2 again
1388	[27937] ahci_start_port 0.2
1389	[27937] ahci_start_port: PORT_SCR_STAT = 0x123
1390	[27937] ahci_start_port: PORT_SCR_ERR = 0x0
1391	[27937] ahci_reset_port: PORT_TFDATA = 0x150
1392	[27937] ATA command for 0.2.0, slot 0:
1393	[27937] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
1394	[27937] ata_cmd: 1530:4c02 00 00 01 00 a7 34 8a 18-00 00 25 40 .....4....%@
1395	[27937] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
1396	[27937] executing polled cmd on slot 0...[27968] ata_read_pp(): blocks transferred = 1
1397	[27968]
1398	[27968] ahci_stop_port 0.2
1399	[27968] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
1400	[27968] IORB 08a0:c56c removed (queue = 0728:5c2c)
1401	[27968] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
1402	[27968] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
1403	[27968] ahci_read(0.2.0, 411710505, 1)
1404	[27968] ahci_reset_port: resetting port 0.2
1405	[27968] AHCI port 2 registers:
1406	PORT_CMD = 0x42006
1407	command engine status:
1408	PORT_SCR_ACT = 0x0
1409	PORT_CMD_ISSUE = 0x0
1410	link/device status:
1411	PORT_SCR_STAT = 0x123
1412	PORT_SCR_CTL = 0x0
1413	PORT_SCR_ERR = 0x0
1414	PORT_TFDATA = 0x50
1415	interrupt status:
1416	PORT_IRQ_STAT = 0x0
1417	PORT_IRQ_MASK = 0x0
1418	HOST_IRQ_STAT = 0x0
1419	[27968] ahci_stop_port 0.2
1420	[27968] ahci_reset_port: setting link speed and power management options
1421	[27968] ahci_reset_port: issuing COMRESET on port 2
1422	[27970] Wait for communication...
1423	[28000] ahci_reset_port: starting port 2 again
1424	[28000] ahci_start_port 0.2
1425	[28000] ahci_start_port: PORT_SCR_STAT = 0x123
1426	[28000] ahci_start_port: PORT_SCR_ERR = 0x0
1427	[28000] ahci_reset_port: PORT_TFDATA = 0x150
1428	[28000] ATA command for 0.2.0, slot 0:
1429	[28000] cmd_hdr: 0750:0000 05 00 01 00 00 00 00 00-00 b5 f0 00 00 00 00 00 ................
1430	[28000] ata_cmd: 1530:4c08 00 00 01 00 29 34 8a 18-00 00 25 40 ....)4....%@
1431	[28000] sg_list: 0750:0580 10 66 db d7 00 00 00 00-00 00 00 00 ff 01 00 00 .f..............
1432	[28000] executing polled cmd on slot 0...[28031] ata_read_pp(): blocks transferred = 1
1433	[28031]
1434	[28031] ahci_stop_port 0.2
1435	[28031] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
1436	[28031] IORB 08a0:c56c removed (queue = 0728:5c2c)
1437	[28031] IORB 08a0:c56c complete (status = 0x0001, error = 0x0000)
1438	[28031] IORB 08a0:c56c queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
1439	[28031] ahci_read(0.2.0, 411710632, 1)
1440	[28031] ahci_reset_port: resetting port 0.2
1441	[28031] AHCI port 2 registers:
1442	PORT_CMD = 0x42006
1443	command engine status:
1444	PORT_SCR_ACT = 0x0
1445	PORT_CMD_ISSUE = 0x0
1446	link/device status:
1447	PORT_SCR_STAT = 0x123
1448	PORT_SCR_CTL = 0x0
1449	PORT_SCR_ERR = 0x0
1450	PORT_TFDATA = 0x50
1451	interrupt status:
1452	PORT_IRQ_STAT = 0x0
1453	PORT_IRQ_MASK = 0x0
1454	HOST_IRQ_STAT = 0x0
1455	[28031] ahci_stop_port 0.2
1456	[28031] ahci_reset_port: setting link speed and power management options
1457	[28031] ahci_reset_port: issuing COMRESET on port 2
1458	[28033] Wait for communication...
1459	[28062] ahci_reset_port: starting port 2 again
1460	[28062] ahci_start_port 0.2
1461	[28062] ahci_start_port: PORT_SCR_STAT = 0x123
1462	[28062] ahci_start_port: PORT_SCR_ERR = 0x0
1463	[28062] ahci_reset_port: PORT_TFDATA = 0x150
1464	[28062] ATA command f[181951] IORB 0928:7f3f queued (cmd = 4/1, queue = 0728:5c2c [port], timeout = 0)
1465	[181951] ahci_read(0.2.0, 1235034639, 8)
1466	[181951] ATA command for 0.2.0, slot 5:
1467	[181951] cmd_hdr: 0750:00a0 05 00 01 00 00 00 00 00-80 c6 f0 00 00 00 00 00 ................
1468	[181951] ata_cmd: 1530:569c 00 00 08 00 0f 22 9d 49-00 00 25 40 .....".I..%@
1469	[181951] sg_list: 0750:1700 00 50 e9 d3 00 00 00 00-00 00 00 00 ff 0f 00 00 .P..............
1470	[181951] issuing command on slot 5
1471	[181996] port interrupt for adapter 0 port 2 stat 1 stack frame 15e8:ff9e
1472	[181996] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000020
1473	[181996] ata_read_pp(): blocks transferred = 8
1474	[181996] IORB 0928:7f3f removed (queue = 0728:5c2c)
1475	[181996] IORB 0928:7f3f complete (status = 0x0001, error = 0x0000)
1476	[181996] IORB 0928:7f3f queued (cmd = 4/4, queue = 0728:5c2c [port], timeout = 0)
1477	[181996] ahci_write(0.2.0, 1247645527, 8)
1478	[181996] ATA command for 0.2.0, slot 6:
1479	[181996] cmd_hdr: 0750:00c0 45 00 01 00 00 00 00 00-00 ca f0 00 00 00 00 00 E...............
1480	[181996] ata_cmd: 1530:58c6 00 00 08 00 57 8f 5d 4a-00 00 35 40 ....W.]J..5@
1481	[181996] sg_list: 0750:1a80 00 70 ea d3 00 00 00 00-00 00 00 00 ff 0f 00 00 .p..............
1482	[181996] issuing command on slot 6
1483	[181996] port interrupt for adapter 0 port 2 stat 1 stack frame 15e8:ff9e
1484	[181996] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000040
1485	[181996] ata_write_pp(): blocks transferred = 8
1486	[181996] IORB 0928:7f3f removed (queue = 0728:5c2c)
1487	[181996] IORB 0928:7f3f complete (status = 0x0001, error = 0x0000)
1488	[181996] IORB 0928:8050 queued (cmd = 4/4, queue = 0728:5c2c [port], timeout = 0)
1489	[181996] ahci_write(0.2.0, 1247668599, 64)
1490	[181996] ATA command for 0.2.0, slot 7:
1491	[181996] cmd_hdr: 0750:00e0 45 00 08 00 00 00 00 00-80 cd f0 00 00 00 00 00 E...............
1492	[181996] ata_cmd: 15e8:fd8e 00 00 40 00 77 e9 5d 4a-00 00 35 40 ..@.w.]J..5@
1493	[181996] sg_list: 0750:1e00 00 40 e9 d3 00 00 00 00-00 00 00 00 ff 0f 00 00 .@..............
1494	0750:1e10 00 30 e9 d3 00 00 00 00-00 00 00 00 ff 0f 00 00 .0..............
1495	0750:1e20 00 20 e9 d3 00 00 00 00-00 00 00 00 ff 0f 00 00 . ..............
1496	0750:1e30 00 10 e9 d3 00 00 00 00-00 00 00 00 ff 0f 00 00 ................
1497	0750:1e40 00 00 e9 d3 00 00 00 00-00 00 00 00 ff 0f 00 00 ................
1498	0750:1e50 00 f0 e8 d3 00 00 00 00-00 00 00 00 ff 0f 00 00 ................
1499	0750:1e60 00 e0 e8 d3 00 00 00 00-00 00 00 00 ff 0f 00 00 ................
1500	0750:1e70 00 d0 e8 d3 00 00 00 00-00 00 00 00 ff 0f 00 00 ................
1501	[181996] issuing command on slot 7
1502	----- Output of: type ibms506$ ------------------------------------------------------------------
1503	R1.8.15 /!BIOS
1504	Daniela's Bus Master IDE Driver for OS/2 Version 1.8.15
1505	Controller:2 Port:01F0 IRQ:0E Status:OK BusMaster Scatter/Gather
1506	ATI IXP PATA host (1002:438C rev:00) on PCI 0:20.1#0
1507	Unit:0 Status:OK ATAPI BusMaster UltraDMA2/PIO4
1508	Model:HL-DT-STDVD-ROM GDR8164B 0L06
1509
1510
1511	----- Output of: H:\ecs\install\DETECTEI\PCI.EXE -N ---------------------------------------------
1512	Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
1513	Loaded Vendor Data : "This is version ha_merged, 16 May 2013 17:34:47"
1514
1515	PCI BIOS Version 2.10 found!
1516	Number of PCI Busses : 6
1517	PCI Characteristics : Config Mechanism 1
1518
1519	Searching for PCI Devices using the OEMHLP$ driver
1520
1521	Bus 0 (PCI Express), Device Number 0, Device Function 0
1522	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1523	Device 5956h RD790 Host Bridge
1524	Command 0006h (Memory Access, BusMaster)
1525	Status 2230h (Has Capabilities List, Supports 66MHz, Received Master Abort,
1526	Medium Timing)
1527	Revision 00h, Header Type 00h, Bus Latency Timer 00h
1528	Self test 00h (Self test not supported)
1529	PCI Class Bridge, type PCI to HOST
1530	Subsystem ID 59561002h Unknown (Generic ID)
1531	Subsystem Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1532	Address 0 is not present or not configured!
1533	Address 1 is not present or not configured!
1534	Address 2 is not present or not configured!
1535	Address 3 is a Memory Address (64-bit) : E0000000h
1536	New Capabilities List Present:
1537	HyperTransport Capability
1538	SubType : Slave/Primary Interface
1539	Base UnitID : 0
1540	UnitID Count : 12
1541	HyperTransport Capability
1542	SubType : Retry mode
1543	HyperTransport Capability
1544	SubType : UnitID Clumping
1545	HyperTransport Capability
1546	SubType : ?? Unknown
1547
1548	Bus 0 (PCI Express), Device Number 2, Device Function 0
1549	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1550	Device 5978h RD790 PCI to PCI bridge (external gfx0 port A)
1551	Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
1552	Status 0010h (Has Capabilities List, Fast Timing)
1553	Revision 00h, Header Type 01h, Bus Latency Timer 00h
1554	Self test 00h (Self test not supported)
1555	Cache line size 64 Bytes (16 DWords)
1556	PCI Class Bridge, type PCI to PCI
1557	Subsystem ID 59561002h Unknown
1558	Subsystem Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1559	System IRQ 18, INT# A
1560	PCI Bridge Information:
1561	Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
1562	Secondary Bus Command 001Bh (parity detection, CSERR forwarded, VGA mapping)
1563	Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
1564	Secondary Bus Latency 00h
1565	I/O Port Range Passed to Secondary Bus : 00009000h..00009FFFh (32-bit)
1566	Memory Range Passed to Secondary Bus : FE700000h..FE7FFFFFh
1567	Prefetchable Memory Range Passed to Secondary Bus : D8000000h..DFFFFFFFh
1568	New Capabilities List Present:
1569	Power Management Capability, Version 1.2
1570	Does not support low power State D1 or D2
1571	Supports PME# signalling from mode(s) D0, D3hot, D3cold
1572	PME# signalling is currently disabled
1573	3.3v AUX Current required : 0 mA (Self powered)
1574	Current Power State : D0 (Device operational, no power saving)
1575	PCI Express Capability, Version 2
1576	Device/Port Type :
1577	Root port of PCI Express Root Complex
1578	Port Type :
1579	Port is an Integrated Device
1580	Unsupported Request Severity is Fatal
1581	Device Status :
1582	Link Capabilities :
1583	Maximum Link speed : Unknown (02h)!!
1584	Maximum Link Width : x16
1585	Link Port Number : 0
1586	Link Control :
1587	Common Clock Configuration In Use
1588	Link Status :
1589	Current Link speed : 2.5Gb/s
1590	Current Link Width : x16
1591	Message Signalled Interrupt Capability
1592	MSI is disabled
1593	MSI function can generate 32-bit addresses
1594	Subsystem ID & Subsystem Vendor ID Capability
1595	SSVID : 1002h
1596	SSID : 5956h
1597	HyperTransport Capability
1598	SubType : MSI Mapping
1599
1600	Bus 0 (PCI Express), Device Number 4, Device Function 0
1601	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1602	Device 597Ah RD790 PCI to PCI bridge (PCI express gpp port A)
1603	Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
1604	Status 0010h (Has Capabilities List, Fast Timing)
1605	Revision 00h, Header Type 01h, Bus Latency Timer 00h
1606	Self test 00h (Self test not supported)
1607	Cache line size 64 Bytes (16 DWords)
1608	PCI Class Bridge, type PCI to PCI
1609	Subsystem ID 59561002h Unknown
1610	Subsystem Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1611	System IRQ 16, INT# A
1612	PCI Bridge Information:
1613	Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
1614	Secondary Bus Command 0003h (parity detection, CSERR forwarded)
1615	Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
1616	Secondary Bus Latency 00h
1617	I/O Port Range Passed to Secondary Bus : 0000A000h..0000BFFFh (32-bit)
1618	Memory Range Passed to Secondary Bus : FE800000h..FE8FFFFFh
1619	Prefetchable Memory Range Passed to Secondary Bus : None
1620	New Capabilities List Present:
1621	Power Management Capability, Version 1.2
1622	Does not support low power State D1 or D2
1623	Supports PME# signalling from mode(s) D0, D3hot, D3cold
1624	PME# signalling is currently disabled
1625	3.3v AUX Current required : 0 mA (Self powered)
1626	Current Power State : D0 (Device operational, no power saving)
1627	PCI Express Capability, Version 2
1628	Device/Port Type :
1629	Root port of PCI Express Root Complex
1630	Port Type :
1631	Port is an Integrated Device
1632	Unsupported Request Severity is Fatal
1633	Device Status :
1634	Link Capabilities :
1635	Maximum Link speed : Unknown (02h)!!
1636	Maximum Link Width : x2
1637	Link Port Number : 0
1638	Link Control :
1639	Common Clock Configuration In Use
1640	Link Status :
1641	Current Link speed : 2.5Gb/s
1642	Current Link Width : x1
1643	Message Signalled Interrupt Capability
1644	MSI is disabled
1645	MSI function can generate 32-bit addresses
1646	Subsystem ID & Subsystem Vendor ID Capability
1647	SSVID : 1002h
1648	SSID : 5956h
1649	HyperTransport Capability
1650	SubType : MSI Mapping
1651
1652	Bus 0 (PCI Express), Device Number 6, Device Function 0
1653	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1654	Device 597Ch RD790 PCI to PCI bridge (PCI express gpp port C)
1655	Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
1656	Status 0010h (Has Capabilities List, Fast Timing)
1657	Revision 00h, Header Type 01h, Bus Latency Timer 00h
1658	Self test 00h (Self test not supported)
1659	Cache line size 64 Bytes (16 DWords)
1660	PCI Class Bridge, type PCI to PCI
1661	Subsystem ID 59561002h Unknown
1662	Subsystem Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1663	System IRQ 18, INT# A
1664	PCI Bridge Information:
1665	Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus number 3
1666	Secondary Bus Command 0003h (parity detection, CSERR forwarded)
1667	Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
1668	Secondary Bus Latency 00h
1669	I/O Port Range Passed to Secondary Bus : 0000C000h..0000CFFFh (32-bit)
1670	Memory Range Passed to Secondary Bus : FE900000h..FE9FFFFFh
1671	Prefetchable Memory Range Passed to Secondary Bus : None
1672	New Capabilities List Present:
1673	Power Management Capability, Version 1.2
1674	Does not support low power State D1 or D2
1675	Supports PME# signalling from mode(s) D0, D3hot, D3cold
1676	PME# signalling is currently disabled
1677	3.3v AUX Current required : 0 mA (Self powered)
1678	Current Power State : D0 (Device operational, no power saving)
1679	PCI Express Capability, Version 2
1680	Device/Port Type :
1681	Root port of PCI Express Root Complex
1682	Port Type :
1683	Port is an Integrated Device
1684	Unsupported Request Severity is Fatal
1685	Device Status :
1686	Link Capabilities :
1687	Maximum Link speed : Unknown (02h)!!
1688	Maximum Link Width : x1
1689	Link Port Number : 2
1690	Link Control :
1691	Common Clock Configuration In Use
1692	Link Status :
1693	Current Link speed : 2.5Gb/s
1694	Current Link Width : x1
1695	Message Signalled Interrupt Capability
1696	MSI is disabled
1697	MSI function can generate 32-bit addresses
1698	Subsystem ID & Subsystem Vendor ID Capability
1699	SSVID : 1002h
1700	SSID : 5956h
1701	HyperTransport Capability
1702	SubType : MSI Mapping
1703
1704	Bus 0 (PCI Express), Device Number 7, Device Function 0
1705	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1706	Device 597Dh RD790 PCI to PCI bridge (PCI express gpp port D)
1707	Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
1708	Status 0010h (Has Capabilities List, Fast Timing)
1709	Revision 00h, Header Type 01h, Bus Latency Timer 00h
1710	Self test 00h (Self test not supported)
1711	Cache line size 64 Bytes (16 DWords)
1712	PCI Class Bridge, type PCI to PCI
1713	Subsystem ID 59561002h Unknown
1714	Subsystem Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1715	System IRQ 19, INT# A
1716	PCI Bridge Information:
1717	Primary Bus Number 0, Secondary Bus Number 4, Subordinate Bus number 4
1718	Secondary Bus Command 0003h (parity detection, CSERR forwarded)
1719	Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
1720	Secondary Bus Latency 00h
1721	I/O Port Range Passed to Secondary Bus : 0000D000h..0000EFFFh (32-bit)
1722	Memory Range Passed to Secondary Bus : FEA00000h..FEAFFFFFh
1723	Prefetchable Memory Range Passed to Secondary Bus : None
1724	New Capabilities List Present:
1725	Power Management Capability, Version 1.2
1726	Does not support low power State D1 or D2
1727	Supports PME# signalling from mode(s) D0, D3hot, D3cold
1728	PME# signalling is currently disabled
1729	3.3v AUX Current required : 0 mA (Self powered)
1730	Current Power State : D0 (Device operational, no power saving)
1731	PCI Express Capability, Version 2
1732	Device/Port Type :
1733	Root port of PCI Express Root Complex
1734	Port Type :
1735	Port is an Integrated Device
1736	Unsupported Request Severity is Fatal
1737	Device Status :
1738	Link Capabilities :
1739	Maximum Link speed : Unknown (02h)!!
1740	Maximum Link Width : x1
1741	Link Port Number : 3
1742	Link Control :
1743	Common Clock Configuration In Use
1744	Link Status :
1745	Current Link speed : 2.5Gb/s
1746	Current Link Width : x1
1747	Message Signalled Interrupt Capability
1748	MSI is disabled
1749	MSI function can generate 32-bit addresses
1750	Subsystem ID & Subsystem Vendor ID Capability
1751	SSVID : 1002h
1752	SSID : 5956h
1753	HyperTransport Capability
1754	SubType : MSI Mapping
1755
1756	Bus 0 (PCI Express), Device Number 18, Device Function 0
1757	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1758	Device 4380h SB600 Non-Raid-5 SATA
1759	Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
1760	Status 0230h (Has Capabilities List, Supports 66MHz, Medium Timing)
1761	Revision 00h, Header Type 00h, Bus Latency Timer 40h
1762	Self test 00h (Self test not supported)
1763	Cache line size 64 Bytes (16 DWords)
1764	PCI Class Storage, type IDE (ATA)
1765	PCI EIDE Controller Features :
1766	BusMaster EIDE is supported
1767	Primary Channel is in native mode at Addresses 0 & 1
1768	Secondary Channel is in native mode at Addresses 2 & 3
1769	Subsystem ID 81EF1043h Unknown
1770	Subsystem Vendor 1043h ASUSTeK Computer Inc.
1771	Address 0 is an I/O Port : 8000h..8007h
1772	Address 1 is an I/O Port : 7000h..7003h
1773	Address 2 is an I/O Port : 6000h..6007h
1774	Address 3 is an I/O Port : 5000h..5003h
1775	Address 4 is an I/O Port : 4000h..400Fh
1776	Address 5 is a Memory Address (0-4GiB) : FE6FF800h..FE6FFBFFh
1777	System IRQ 22, INT# A
1778	New Capabilities List Present:
1779	Power Management Capability, Version 1.1
1780	Does not support low power State D1 or D2
1781	Does not support PME# signalling
1782	Current Power State : D0 (Device operational, no power saving)
1783
1784	Bus 0 (PCI Express), Device Number 19, Device Function 0
1785	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1786	Device 4387h SB600 USB (OHCI0)
1787	Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
1788	System Errors)
1789	Status 02A0h (Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
1790	Revision 00h, Header Type 80h, Bus Latency Timer 40h
1791	Self test 00h (Self test not supported)
1792	Cache line size 64 Bytes (16 DWords)
1793	PCI Class Serial, type USB (OHCI)
1794	Subsystem ID 82881043h Unknown
1795	Subsystem Vendor 1043h ASUSTeK Computer Inc.
1796	Address 0 is a Memory Address (0-4GiB) : FE6FE000h..FE6FEFFFh
1797	System IRQ 16, INT# A
1798
1799	Bus 0 (PCI Express), Device Number 19, Device Function 1
1800	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1801	Device 4388h SB600 USB (OHCI1)
1802	Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
1803	System Errors)
1804	Status 02A0h (Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
1805	Revision 00h, Header Type 00h, Bus Latency Timer 40h
1806	Self test 00h (Self test not supported)
1807	Cache line size 64 Bytes (16 DWords)
1808	PCI Class Serial, type USB (OHCI)
1809	Subsystem ID 82881043h Unknown
1810	Subsystem Vendor 1043h ASUSTeK Computer Inc.
1811	Address 0 is a Memory Address (0-4GiB) : FE6FD000h..FE6FDFFFh
1812	System IRQ 17, INT# B
1813
1814	Bus 0 (PCI Express), Device Number 19, Device Function 2
1815	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1816	Device 4389h SB600 USB (OHCI2)
1817	Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
1818	System Errors)
1819	Status 02A0h (Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
1820	Revision 00h, Header Type 00h, Bus Latency Timer 40h
1821	Self test 00h (Self test not supported)
1822	Cache line size 64 Bytes (16 DWords)
1823	PCI Class Serial, type USB (OHCI)
1824	Subsystem ID 82881043h Unknown
1825	Subsystem Vendor 1043h ASUSTeK Computer Inc.
1826	Address 0 is a Memory Address (0-4GiB) : FE6FC000h..FE6FCFFFh
1827	System IRQ 18, INT# C
1828
1829	Bus 0 (PCI Express), Device Number 19, Device Function 3
1830	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1831	Device 438Ah SB600 USB (OHCI3)
1832	Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
1833	System Errors)
1834	Status 02A0h (Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
1835	Revision 00h, Header Type 00h, Bus Latency Timer 40h
1836	Self test 00h (Self test not supported)
1837	Cache line size 64 Bytes (16 DWords)
1838	PCI Class Serial, type USB (OHCI)
1839	Subsystem ID 82881043h Unknown
1840	Subsystem Vendor 1043h ASUSTeK Computer Inc.
1841	Address 0 is a Memory Address (0-4GiB) : FE6FB000h..FE6FBFFFh
1842	System IRQ 17, INT# B
1843
1844	Bus 0 (PCI Express), Device Number 19, Device Function 4
1845	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1846	Device 438Bh SB600 USB (OHCI4)
1847	Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
1848	System Errors)
1849	Status 02A0h (Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
1850	Revision 00h, Header Type 00h, Bus Latency Timer 40h
1851	Self test 00h (Self test not supported)
1852	Cache line size 64 Bytes (16 DWords)
1853	PCI Class Serial, type USB (OHCI)
1854	Subsystem ID 82881043h Unknown
1855	Subsystem Vendor 1043h ASUSTeK Computer Inc.
1856	Address 0 is a Memory Address (0-4GiB) : FE6FA000h..FE6FAFFFh
1857	System IRQ 18, INT# C
1858
1859	Bus 0 (PCI Express), Device Number 19, Device Function 5
1860	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1861	Device 4386h SB600 USB Controller (EHCI)
1862	Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
1863	System Errors)
1864	Status 02B0h (Has Capabilities List, Supports 66MHz,
1865	Supports Back-To-Back Trans., Medium Timing)
1866	Revision 00h, Header Type 00h, Bus Latency Timer 40h
1867	Self test 00h (Self test not supported)
1868	Cache line size 64 Bytes (16 DWords)
1869	PCI Class Serial, type USB 2.0 (EHCI)
1870	Subsystem ID 82881043h Unknown
1871	Subsystem Vendor 1043h ASUSTeK Computer Inc.
1872	Address 0 is a Memory Address (0-4GiB) : FE6FF000h..FE6FF0FFh
1873	System IRQ 19, INT# D
1874	New Capabilities List Present:
1875	Power Management Capability, Version 1.1
1876	Supports low power State D1
1877	Supports low power State D2
1878	Supports PME# signalling from mode(s) D0, D1, D2, D3hot
1879	PME# signalling is currently disabled
1880	3.3v AUX Current required : 0 mA (Self powered)
1881	Current Power State : D0 (Device operational, no power saving)
1882	Message Signalled Interrupt Capability
1883	MSI is disabled
1884	MSI function can generate 32-bit addresses
1885	USB 2.0 EHCI Debug Port Capability
1886
1887	Bus 0 (PCI Express), Device Number 20, Device Function 0
1888	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1889	Device 4385h SBx00 SMBus Controller
1890	Command 0403h (I/O Access, Memory Access, Interrupt Disable)
1891	Status 0230h (Has Capabilities List, Supports 66MHz, Medium Timing)
1892	Revision 14h, Header Type 80h, Bus Latency Timer 00h
1893	Self test 00h (Self test not supported)
1894	PCI Class Serial, type SMBus Controller
1895	Subsystem ID 82881043h M3A78-EH Motherboard (Guess Only!)
1896	Subsystem Vendor 1043h ASUSTeK Computer Inc.
1897	Address 0 is an I/O Port : 0B00h
1898	New Capabilities List Present:
1899	HyperTransport Capability
1900	SubType : MSI Mapping
1901
1902	Bus 0 (PCI Express), Device Number 20, Device Function 1
1903	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1904	Device 438Ch SB600 IDE
1905	Command 0005h (I/O Access, BusMaster)
1906	Status 0220h (Supports 66MHz, Medium Timing)
1907	Revision 00h, Header Type 00h, Bus Latency Timer 40h
1908	Self test 00h (Self test not supported)
1909	PCI Class Storage, type IDE (ATA)
1910	PCI EIDE Controller Features :
1911	BusMaster EIDE is supported
1912	Primary Channel is at I/O Port 01F0h and IRQ 14
1913	Secondary Channel is at I/O Port 0170h and IRQ 15
1914	Subsystem ID 82881043h Unknown
1915	Subsystem Vendor 1043h ASUSTeK Computer Inc.
1916	Address 0 is an I/O Port : 0000h (unconfigured)
1917	Address 1 is an I/O Port : 0000h (unconfigured)
1918	Address 2 is an I/O Port : 0000h (unconfigured)
1919	Address 3 is an I/O Port : 0000h (unconfigured)
1920	Address 4 is an I/O Port : FF00h..FF07h
1921	System IRQ 16, INT# A
1922
1923	Bus 0 (PCI Express), Device Number 20, Device Function 2
1924	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1925	Device 4383h SBx00 Azalia (Intel HDA)
1926	Command 0006h (Memory Access, BusMaster)
1927	Status 0410h (Has Capabilities List, Slow Timing)
1928	Revision 00h, Header Type 00h, Bus Latency Timer 40h
1929	Self test 00h (Self test not supported)
1930	Cache line size 64 Bytes (16 DWords)
1931	PCI Class Multimedia, type Unknown!
1932	Subsystem ID 82881043h M3A78-EH Motherboard (Guess Only!)
1933	Subsystem Vendor 1043h ASUSTeK Computer Inc.
1934	Address 0 is a Memory Address (64-bit) : FE6F4000h..FE6F7FFFh
1935	System IRQ 16, INT# -
1936	New Capabilities List Present:
1937	Power Management Capability, Version 1.1
1938	Does not support low power State D1 or D2
1939	Supports PME# signalling from mode(s) D0, D3hot, D3cold
1940	PME# signalling is currently disabled
1941	3.3v AUX Current required : 55 mA
1942	Current Power State : D0 (Device operational, no power saving)
1943
1944	Bus 0 (PCI Express), Device Number 20, Device Function 3
1945	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1946	Device 438Dh SB600 PCI to LPC Bridge
1947	Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles)
1948	Status 0220h (Supports 66MHz, Medium Timing)
1949	Revision 00h, Header Type 80h, Bus Latency Timer 00h
1950	Self test 00h (Self test not supported)
1951	PCI Class Bridge, type PCI to ISA
1952	Subsystem ID 82881043h Unknown
1953	Subsystem Vendor 1043h ASUSTeK Computer Inc.
1954
1955	Bus 0 (PCI Express), Device Number 20, Device Function 4
1956	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
1957	Device 4384h SBx00 PCI to PCI Bridge
1958	Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
1959	Status 02A0h (Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
1960	Revision 00h, Header Type 81h, Bus Latency Timer 40h
1961	Self test 00h (Self test not supported)
1962	PCI Class Bridge, type PCI to PCI (Subtractive Decode)
1963	PCI Bridge Information:
1964	Primary Bus Number 0, Secondary Bus Number 5, Subordinate Bus number 5
1965	Secondary Bus Command 0003h (parity detection, CSERR forwarded)
1966	Secondary Bus Status 2280h (Supports Back-To-Back Trans.,
1967	Received Master Abort, Medium Timing)
1968	Secondary Bus Latency 40h
1969	I/O Port Range Passed to Secondary Bus : None
1970	Memory Range Passed to Secondary Bus : FEB00000h..FEBFFFFFh
1971	Prefetchable Memory Range Passed to Secondary Bus : None
1972
1973	Bus 0 (PCI Express), Device Number 24, Device Function 0
1974	Vendor 1022h Advanced Micro Devices, Inc. [AMD]
1975	Device 1200h Family 10h Processor HyperTransport Configuration
1976	Command 0000h (Bus Access Disabled!!)
1977	Status 0010h (Has Capabilities List, Fast Timing)
1978	Revision 00h, Header Type 80h, Bus Latency Timer 00h
1979	Self test 00h (Self test not supported)
1980	PCI Class Bridge, type PCI to HOST
1981	New Capabilities List Present:
1982	HyperTransport Capability
1983	SubType : Host/Secondary Interface
1984
1985	Bus 0 (PCI Express), Device Number 24, Device Function 1
1986	Vendor 1022h Advanced Micro Devices, Inc. [AMD]
1987	Device 1201h Family 10h Processor Address Map
1988	Command 0000h (Bus Access Disabled!!)
1989	Status 0000h
1990	Revision 00h, Header Type 80h, Bus Latency Timer 00h
1991	Self test 00h (Self test not supported)
1992	PCI Class Bridge, type PCI to HOST
1993
1994	Bus 0 (PCI Express), Device Number 24, Device Function 2
1995	Vendor 1022h Advanced Micro Devices, Inc. [AMD]
1996	Device 1202h Family 10h Processor DRAM Controller
1997	Command 0000h (Bus Access Disabled!!)
1998	Status 0000h
1999	Revision 00h, Header Type 80h, Bus Latency Timer 00h
2000	Self test 00h (Self test not supported)
2001	PCI Class Bridge, type PCI to HOST
2002
2003	Bus 0 (PCI Express), Device Number 24, Device Function 3
2004	Vendor 1022h Advanced Micro Devices, Inc. [AMD]
2005	Device 1203h Family 10h Processor Miscellaneous Control
2006	Command 0000h (Bus Access Disabled!!)
2007	Status 0010h (Has Capabilities List, Fast Timing)
2008	Revision 00h, Header Type 80h, Bus Latency Timer 00h
2009	Self test 00h (Self test not supported)
2010	PCI Class Bridge, type PCI to HOST
2011	New Capabilities List Present:
2012	Secure Device Capability
2013
2014	Bus 0 (PCI Express), Device Number 24, Device Function 4
2015	Vendor 1022h Advanced Micro Devices, Inc. [AMD]
2016	Device 1204h Family 10h Processor Link Control
2017	Command 0000h (Bus Access Disabled!!)
2018	Status 0000h
2019	Revision 00h, Header Type 80h, Bus Latency Timer 00h
2020	Self test 00h (Self test not supported)
2021	PCI Class Bridge, type PCI to HOST
2022
2023	Bus 1 (AGP), Device Number 0, Device Function 0
2024	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
2025	Device 5B63h RV370 [Radeon X300/X550/X1050 Series]
2026	Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
2027	Status 0010h (Has Capabilities List, Fast Timing)
2028	Revision 00h, Header Type 80h, Bus Latency Timer 00h
2029	Self test 00h (Self test not supported)
2030	Cache line size 64 Bytes (16 DWords)
2031	PCI Class Display, type VGA
2032	Subsystem ID 037317EEh Unknown
2033	Subsystem Vendor 17EEh Connect Components Ltd
2034	Address 0 is a Memory Address (0-4GiB, Prefetchable) : D8000000h
2035	Address 1 is an I/O Port : 9000h
2036	Address 2 is a Memory Address (0-4GiB) : FE7F0000h
2037	System IRQ 18, INT# A
2038	New Capabilities List Present:
2039	Power Management Capability, Version 1.1
2040	Supports low power State D1
2041	Supports low power State D2
2042	Does not support PME# signalling
2043	Current Power State : D0 (Device operational, no power saving)
2044	PCI Express Capability, Version 1
2045	Device/Port Type :
2046	PCI Express Endpoint Device
2047	Device Capabilities :
2048	Unsupported Request Severity is Non-Fatal
2049	Device Status :
2050	Link Capabilities :
2051	Maximum Link speed : 2.5Gb/s
2052	Maximum Link Width : x16
2053	Link Port Number : 0
2054	Link Control :
2055	Common Clock Configuration In Use
2056	Link Status :
2057	Current Link speed : 2.5Gb/s
2058	Current Link Width : x16
2059	Message Signalled Interrupt Capability
2060	MSI is disabled
2061	MSI function can generate 64-bit addresses
2062
2063	Bus 1 (AGP), Device Number 0, Device Function 1
2064	Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
2065	Device 5B73h RV370 [Radeon X300/X550/X1050 Series] (Secondary)
2066	Command 0007h (I/O Access, Memory Access, BusMaster)
2067	Status 0010h (Has Capabilities List, Fast Timing)
2068	Revision 00h, Header Type 00h, Bus Latency Timer 00h
2069	Self test 00h (Self test not supported)
2070	Cache line size 64 Bytes (16 DWords)
2071	PCI Class Display, type Other
2072	Subsystem ID 037217EEh Unknown
2073	Subsystem Vendor 17EEh Connect Components Ltd
2074	Address 0 is a Memory Address (0-4GiB) : FE7E0000h
2075	New Capabilities List Present:
2076	Power Management Capability, Version 1.1
2077	Supports low power State D1
2078	Supports low power State D2
2079	Does not support PME# signalling
2080	Current Power State : D0 (Device operational, no power saving)
2081	PCI Express Capability, Version 1
2082	Device/Port Type :
2083	PCI Express Endpoint Device
2084	Device Capabilities :
2085	Unsupported Request Severity is Non-Fatal
2086	Device Status :
2087	Link Capabilities :
2088	Maximum Link speed : 2.5Gb/s
2089	Maximum Link Width : x16
2090	Link Port Number : 0
2091	Link Control :
2092	Common Clock Configuration In Use
2093	Link Status :
2094	Current Link speed : 2.5Gb/s
2095	Current Link Width : x16
2096
2097	Bus 2 (PCI Express), Device Number 0, Device Function 0
2098	Vendor 11ABh Marvell Technology Group Ltd.
2099	Device 6121h 88SE6121 SATA II / PATA Controller
2100	Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
2101	Status 0010h (Has Capabilities List, Fast Timing)
2102	Revision B1h, Header Type 00h, Bus Latency Timer 00h
2103	Self test 00h (Self test not supported)
2104	Cache line size 64 Bytes (16 DWords)
2105	PCI Class Storage, type IDE (ATA)
2106	PCI EIDE Controller Features :
2107	BusMaster EIDE is supported
2108	Primary Channel is in native mode at Addresses 0 & 1
2109	Secondary Channel is in native mode at Addresses 2 & 3
2110	Subsystem ID 612111ABh Unknown (Generic ID)
2111	Subsystem Vendor 11ABh Marvell Technology Group Ltd.
2112	Address 0 is an I/O Port : B800h..B807h
2113	Address 1 is an I/O Port : B400h..B403h
2114	Address 2 is an I/O Port : B000h..B007h
2115	Address 3 is an I/O Port : A800h..A803h
2116	Address 4 is an I/O Port : A400h..A40Fh
2117	Address 5 is a Memory Address (0-4GiB) : FE8FFC00h..FE8FFFFFh
2118	System IRQ 16, INT# A
2119	New Capabilities List Present:
2120	Power Management Capability, Version 1.1
2121	Supports low power State D1
2122	Supports PME# signalling from mode(s) D0, D1, D3hot
2123	PME# signalling is currently disabled
2124	3.3v AUX Current required : 0 mA (Self powered)
2125	Current Power State : D0 (Device operational, no power saving)
2126	Message Signalled Interrupt Capability
2127	MSI is disabled
2128	MSI function can generate 32-bit addresses
2129	PCI Express Capability, Version 1
2130	Device/Port Type :
2131	Legacy PCI Express Endpoint Device
2132	Device Capabilities :
2133	Unsupported Request Severity is Non-Fatal
2134	Device Status :
2135	Unsupported Request Detected
2136	Link Capabilities :
2137	Maximum Link speed : 2.5Gb/s
2138	Maximum Link Width : x1
2139	Link Port Number : 0
2140	Link Control :
2141	Common Clock Configuration In Use
2142	Link Status :
2143	Current Link speed : 2.5Gb/s
2144	Current Link Width : x1
2145
2146	Bus 3 (PCI Express), Device Number 0, Device Function 0
2147	Vendor 11ABh Marvell Technology Group Ltd.
2148	Device 4364h 88E8056 PCI-E Gigabit Ethernet Controller
2149	Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
2150	Status 0010h (Has Capabilities List, Fast Timing)
2151	Revision 12h, Header Type 00h, Bus Latency Timer 00h
2152	Self test 00h (Self test not supported)
2153	Cache line size 64 Bytes (16 DWords)
2154	PCI Class Network, type Ethernet
2155	Subsystem ID 81F81043h Motherboard
2156	Subsystem Vendor 1043h ASUSTeK Computer Inc.
2157	Address 0 is a Memory Address (64-bit) : FE9FC000h
2158	Address 2 is an I/O Port : C800h..C8FFh
2159	System IRQ 18, INT# A
2160	New Capabilities List Present:
2161	Power Management Capability, Version 1.2
2162	Supports low power State D1
2163	Supports low power State D2
2164	Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
2165	PME# signalling is currently disabled
2166	3.3v AUX Current required : 0 mA (Self powered)
2167	Current Power State : D0 (Device operational, no power saving)
2168	Vital Product Data Capability
2169	Message Signalled Interrupt Capability
2170	MSI is disabled
2171	MSI function can generate 64-bit addresses
2172	PCI Express Capability, Version 1
2173	Device/Port Type :
2174	Legacy PCI Express Endpoint Device
2175	Device Capabilities :
2176	Unsupported Request Severity is Non-Fatal
2177	Device Status :
2178	Correctable Error Detected
2179	Unsupported Request Detected
2180	AUX Power Detected
2181	Link Capabilities :
2182	Maximum Link speed : 2.5Gb/s
2183	Maximum Link Width : x1
2184	Link Port Number : 2
2185	Link Control :
2186	Common Clock Configuration In Use
2187	Link Status :
2188	Current Link speed : 2.5Gb/s
2189	Current Link Width : x1
2190
2191	Bus 4 (PCI Express), Device Number 0, Device Function 0
2192	Vendor 11ABh Marvell Technology Group Ltd.
2193	Device 6121h 88SE6121 SATA II / PATA Controller
2194	Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
2195	Status 0010h (Has Capabilities List, Fast Timing)
2196	Revision B2h, Header Type 00h, Bus Latency Timer 00h
2197	Self test 00h (Self test not supported)
2198	Cache line size 64 Bytes (16 DWords)
2199	PCI Class Storage, type IDE (ATA)
2200	PCI EIDE Controller Features :
2201	BusMaster EIDE is supported
2202	Primary Channel is in native mode at Addresses 0 & 1
2203	Secondary Channel is in native mode at Addresses 2 & 3
2204	Subsystem ID 612111ABh Unknown (Generic ID)
2205	Subsystem Vendor 11ABh Marvell Technology Group Ltd.
2206	Address 0 is an I/O Port : E800h..E807h
2207	Address 1 is an I/O Port : E400h..E403h
2208	Address 2 is an I/O Port : E000h..E007h
2209	Address 3 is an I/O Port : D800h..D803h
2210	Address 4 is an I/O Port : D400h..D40Fh
2211	Address 5 is a Memory Address (0-4GiB) : FEAFFC00h..FEAFFFFFh
2212	System IRQ 19, INT# A
2213	New Capabilities List Present:
2214	Power Management Capability, Version 1.1
2215	Supports low power State D1
2216	Supports PME# signalling from mode(s) D0, D1, D3hot
2217	PME# signalling is currently disabled
2218	3.3v AUX Current required : 0 mA (Self powered)
2219	Current Power State : D0 (Device operational, no power saving)
2220	Message Signalled Interrupt Capability
2221	MSI is disabled
2222	MSI function can generate 32-bit addresses
2223	PCI Express Capability, Version 1
2224	Device/Port Type :
2225	Legacy PCI Express Endpoint Device
2226	Device Capabilities :
2227	Unsupported Request Severity is Non-Fatal
2228	Device Status :
2229	Unsupported Request Detected
2230	Link Capabilities :
2231	Maximum Link speed : 2.5Gb/s
2232	Maximum Link Width : x1
2233	Link Port Number : 3
2234	Link Control :
2235	Common Clock Configuration In Use
2236	Link Status :
2237	Current Link speed : 2.5Gb/s
2238	Current Link Width : x1
2239
2240	Bus 5 (PCI), Device Number 8, Device Function 0
2241	Vendor 11C1h LSI Corporation
2242	Device 5811h FW322/323 [TrueFire] 1394a Controller
2243	Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors)
2244	Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
2245	Medium Timing)
2246	Revision 70h, Header Type 00h, Bus Latency Timer 40h
2247	Minimum Bus Grant 0Ch, Maximum Bus Latency 18h
2248	Self test 00h (Self test not supported)
2249	Cache line size 64 Bytes (16 DWords)
2250	PCI Class Serial, type OHCI FireWire
2251	Subsystem ID 82941043h LSI FW322/323 IEEE 1394a FireWire Controller
2252	Subsystem Vendor 1043h ASUSTeK Computer Inc.
2253	Address 0 is a Memory Address (0-4GiB) : FEBFF000h
2254	System IRQ 22, INT# A
2255	New Capabilities List Present:
2256	Power Management Capability, Version 1.1
2257	Supports low power State D1
2258	Supports low power State D2
2259	Supports PME# signalling from mode(s) D0, D1, D2, D3hot
2260	PME# signalling is currently disabled
2261	3.3v AUX Current required : 0 mA (Self powered)
2262	Current Power State : D0 (Device operational, no power saving)
2263
2264	ROM PCI IRQ routing table Tests....
2265	ROM IRQ routing table found at F000h:4700h
2266	Table Version 1.0 - OK
2267	Table size 368 bytes - OK
2268	Table Checksum 45h - OK
2269	PCI Interrupt Router: SB600 PCI to LPC Bridge
2270	IRQ's dedicated to PCI : None
2271	The ROM PCI IRQ routing table appears to be OK.
2272
2273	IRQ Summary: IRQs 14,15,16,17,18,19,22 are used by PCI devices
2274	Shared IRQs: IRQ 16 is shared by 5 PCI Devices
2275	IRQ 17 is shared by 2 PCI Devices
2276	IRQ 18 is shared by 6 PCI Devices
2277	IRQ 19 is shared by 3 PCI Devices
2278	IRQ 22 is shared by 2 PCI Devices
2279
2280	IRQ control is currently managed by the system APIC controller - IRQ info is
2281	not actual hardware settings...

Download in other formats:

Original Format