1 | File created 2 Aug 2013 03:23:59 by TESTLOG.CMD V2.6 available at http://88watts.net |
---|
2 | Test result: geometry problem |
---|
3 | ----- Output of: bldlevel D:\os2\boot\os2ahci.add ----------------------------------------------- |
---|
4 | Build Level Display Facility Version 6.12.675 Sep 25 2001 |
---|
5 | (C) Copyright IBM Corporation 1993-2001 |
---|
6 | Signature: @#D Azarewicz:1.30#@##1## 31 Jul 2013 16:29:00 DAZAR1 ::::::Test Build@@AHCI Driver (c) Mensys BV 2013 |
---|
7 | Vendor: D Azarewicz |
---|
8 | Revision: 1.30 |
---|
9 | Date/Time: 31 Jul 2013 16:29:00 |
---|
10 | Build Machine: DAZAR1 |
---|
11 | FixPak Version: Test Build |
---|
12 | File Version: 1.30 |
---|
13 | Description: AHCI Driver (c) Mensys BV 2013 |
---|
14 | ----- Output of: bldlevel D:\os2\boot\danis506.add ---------------------------------------------- |
---|
15 | Build Level Display Facility Version 6.12.675 Sep 25 2001 |
---|
16 | (C) Copyright IBM Corporation 1993-2001 |
---|
17 | Signature: @#slainc:1.8.9#@##1## 2011/04/11 20:44:35 slamain::::9::@@Adapter Driver for PATA/SATA DASD |
---|
18 | Vendor: slainc |
---|
19 | Revision: 1.08.9 |
---|
20 | Date/Time: 2011/04/11 20:44:35 |
---|
21 | Build Machine: slamain |
---|
22 | File Version: 1.8.9 |
---|
23 | Description: Adapter Driver for PATA/SATA DASD |
---|
24 | ----- Output of: type os2ahci$ ------------------------------------------------------------------ |
---|
25 | BldLevel: @#D Azarewicz:1.30#@##1## 31 Jul 2013 16:29:00 DAZAR1 ::::::Test Build@@AHCI Driver (c) Mensys BV 2013 |
---|
26 | CmdLine: OS2AHCI.ADD /v:2 /d:2 |
---|
27 | [92728] OS2AHCI driver version 1.30 |
---|
28 | [92728] scanning PCI bus... |
---|
29 | [92734] Found AHCI device Intel ICH8M (0:13:0 8086:2829) class:0x010601 |
---|
30 | [92734] BAR #0: type = I/O, addr = 0x0000d040, size = 8 |
---|
31 | [92734] BAR #2: type = I/O, addr = 0x0000d050, size = 8 |
---|
32 | [92734] BAR #4: type = I/O, addr = 0x0000d060, size = 16 |
---|
33 | [92734] BAR #5: type = MEM, addr = 0xf0406000, size = 8192 |
---|
34 | [92781] Registered kernel exit routine for INT13 mode |
---|
35 | [92820] IORB 06b0:03d0 queued (cmd = 1/1, queue = 0658:5824 [driver], timeout = 0) |
---|
36 | [92820] ahci_save_bios_config: BIOS AHCI mode is 0 |
---|
37 | [92820] AHCI global registers for adapter 0:13:0 irq=21 addr=0xf0406000 |
---|
38 | 00: c8241f84 - 64bit ncq sss ahci_only ccc cmd_slots:32 ports:5 |
---|
39 | 04: 80000000 - ahci_enabled |
---|
40 | 08: 00000000 |
---|
41 | 0c: 0000001f |
---|
42 | 10: 00010100 |
---|
43 | 14: 00000000 |
---|
44 | 18: 00000000 |
---|
45 | 1c: 00000000 |
---|
46 | 20: 00000000 |
---|
47 | 24: 00000000 - |
---|
48 | [92820] ahci_scan_ports: scanning ports on adapter 0 |
---|
49 | [92820] ahci_scan_ports: Wait till not busy on port 0 |
---|
50 | [92820] ahci_reset_port: resetting port 0.0 |
---|
51 | [92820] AHCI port 0 registers: |
---|
52 | PORT_CMD = 0x150006 |
---|
53 | command engine status: |
---|
54 | PORT_SCR_ACT = 0x0 |
---|
55 | PORT_CMD_ISSUE = 0x0 |
---|
56 | link/device status: |
---|
57 | PORT_SCR_STAT = 0x123 |
---|
58 | PORT_SCR_CTL = 0x0 |
---|
59 | PORT_SCR_ERR = 0x0 |
---|
60 | PORT_TFDATA = 0x2041 |
---|
61 | interrupt status: |
---|
62 | PORT_IRQ_STAT = 0x0 |
---|
63 | PORT_IRQ_MASK = 0x0 |
---|
64 | HOST_IRQ_STAT = 0x0 |
---|
65 | [92820] ahci_stop_port 0.0 |
---|
66 | [92820] ahci_reset_port: setting link speed and power management options |
---|
67 | [92820] ahci_reset_port: issuing COMRESET on port 0 |
---|
68 | [92908] Wait for communication... |
---|
69 | [92908] ahci_reset_port: starting port 0 again |
---|
70 | [92908] ahci_start_port 0.0 |
---|
71 | [92908] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
72 | [92908] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
73 | [92908] ahci_reset_port: PORT_TFDATA = 0x130 |
---|
74 | [92908] ahci_scan_ports: port 0 seems to be attached to a device; probing... |
---|
75 | [92908] ATA command for 0.0.0, slot 0: |
---|
76 | [92908] cmd_hdr: 0670:0000 05 00 01 00 00 00 00 00-00 c5 dd 00 00 00 00 00 ................ |
---|
77 | [92908] ata_cmd: 1530:4ccc 00 00 00 00 00 00 00 00-00 00 a1 00 ............ |
---|
78 | [92908] sg_list: 0670:0580 84 1d e7 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
79 | [92908] executing polled cmd...[92937] success |
---|
80 | [92937] ATA_IDENTIFY_PACKET results: |
---|
81 | 0658:2d84 c0 85 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
82 | 0658:2d94 00 00 00 00 42 56 2d 30-61 31 62 32 63 33 64 34 ....BV-0a1b2c3d4 |
---|
83 | 0658:2da4 20 20 20 20 20 20 20 20-03 00 00 02 00 00 2e 31 .......1 |
---|
84 | 0658:2db4 20 30 20 20 20 20 42 56-58 4f 43 20 2d 44 4f 52 0 BVXOC -DOR |
---|
85 | 0658:2dc4 20 4d 20 20 20 20 20 20-20 20 20 20 20 20 20 20 M |
---|
86 | 0658:2dd4 20 20 20 20 20 20 20 20-20 20 20 20 20 20 00 00 .. |
---|
87 | 0658:2de4 00 00 00 0b 00 40 f0 00-f0 00 06 00 00 00 00 00 .....@.......... |
---|
88 | 0658:2df4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 07 00 ................ |
---|
89 | 0658:2e04 03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00 ..x.x.x.x....... |
---|
90 | 0658:2e14 00 00 3e 00 09 00 1f 00-04 01 00 00 00 00 00 00 ..>............. |
---|
91 | 0658:2e24 7e 00 22 00 10 02 00 40-00 40 10 02 00 00 00 40 ~."....@.@.....@ |
---|
92 | 0658:2e34 7f 40 00 00 00 00 00 00-00 00 03 60 00 00 00 00 @.........`.... |
---|
93 | 0658:2e44 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
94 | 0658:2e54 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
95 | 0658:2e64 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
96 | 0658:2e74 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
97 | 0658:2e84 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
98 | 0658:2e94 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
99 | 0658:2ea4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
100 | 0658:2eb4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
101 | 0658:2ec4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
102 | 0658:2ed4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
103 | 0658:2ee4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
104 | 0658:2ef4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
105 | 0658:2f04 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
106 | 0658:2f14 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
107 | 0658:2f24 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
108 | 0658:2f34 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
109 | 0658:2f44 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
110 | 0658:2f54 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
111 | 0658:2f64 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
112 | 0658:2f74 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
113 | [92937] found device 0.0.0: removable = 1, dev_type = 5, atapi = 1, ncq_max = 1 |
---|
114 | [92937] ahci_stop_port 0.0 |
---|
115 | [92937] ahci_scan_ports: Wait till not busy on port 1 |
---|
116 | [92937] ahci_reset_port: resetting port 0.1 |
---|
117 | [92937] AHCI port 1 registers: |
---|
118 | PORT_CMD = 0x150006 |
---|
119 | command engine status: |
---|
120 | PORT_SCR_ACT = 0x0 |
---|
121 | PORT_CMD_ISSUE = 0x0 |
---|
122 | link/device status: |
---|
123 | PORT_SCR_STAT = 0x123 |
---|
124 | PORT_SCR_CTL = 0x0 |
---|
125 | PORT_SCR_ERR = 0x4000000 |
---|
126 | PORT_TFDATA = 0x0 |
---|
127 | interrupt status: |
---|
128 | PORT_IRQ_STAT = 0x40 |
---|
129 | PORT_IRQ_MASK = 0x0 |
---|
130 | HOST_IRQ_STAT = 0x0 |
---|
131 | [92937] ahci_stop_port 0.1 |
---|
132 | [92937] ahci_reset_port: setting link speed and power management options |
---|
133 | [92937] ahci_reset_port: issuing COMRESET on port 1 |
---|
134 | [93025] Wait for communication... |
---|
135 | [93025] ahci_reset_port: starting port 1 again |
---|
136 | [93025] ahci_start_port 0.1 |
---|
137 | [93025] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
138 | [93025] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
139 | [93025] ahci_reset_port: PORT_TFDATA = 0x170 |
---|
140 | [93025] ahci_scan_ports: port 1 seems to be attached to a device; probing... |
---|
141 | [93025] ATA command for 0.1.0, slot 0: |
---|
142 | [93025] cmd_hdr: 0670:7800 05 00 01 00 00 00 00 00-00 3d de 00 00 00 00 00 .........=...... |
---|
143 | [93025] ata_cmd: 1530:4ccc 00 00 00 00 00 00 00 00-00 00 ec 00 ............ |
---|
144 | [93025] sg_list: 0670:7d80 84 1d e7 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
145 | [93025] executing polled cmd...[93025] success |
---|
146 | [93025] ATA_IDENTIFY results: |
---|
147 | 0658:2d84 40 00 41 10 00 00 10 00-00 00 00 02 3f 00 00 00 @.A.........?... |
---|
148 | 0658:2d94 00 00 00 00 42 56 38 33-31 35 62 34 39 32 35 2d ....BV8315b4925- |
---|
149 | 0658:2da4 30 35 61 33 37 38 20 61-03 00 00 02 00 00 2e 31 05a378 a.......1 |
---|
150 | 0658:2db4 20 30 20 20 20 20 42 56-58 4f 48 20 52 41 44 44 0 BVXOH RADD |
---|
151 | 0658:2dc4 53 49 20 4b 20 20 20 20-20 20 20 20 20 20 20 20 SI K |
---|
152 | 0658:2dd4 20 20 20 20 20 20 20 20-20 20 20 20 20 20 80 80 .. |
---|
153 | 0658:2de4 01 00 00 0b 00 40 f0 00-f0 00 07 00 41 10 10 00 .....@......A... |
---|
154 | 0658:2df4 3f 00 f0 ff 3f 00 80 01-00 00 40 00 00 00 07 00 ?...?.....@..... |
---|
155 | 0658:2e04 03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00 ..x.x.x.x....... |
---|
156 | 0658:2e14 00 00 00 00 00 00 1f 00-04 01 00 00 00 00 00 00 ................ |
---|
157 | 0658:2e24 7e 00 22 00 68 00 00 74-00 40 68 00 00 34 00 40 ~.".h..t.@h..4.@ |
---|
158 | 0658:2e34 7f 40 00 00 00 00 00 00-00 00 00 00 00 00 00 00 @.............. |
---|
159 | 0658:2e44 00 00 00 00 00 00 00 00-00 00 40 00 00 00 00 00 ..........@..... |
---|
160 | 0658:2e54 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
161 | 0658:2e64 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
162 | 0658:2e74 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
163 | 0658:2e84 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
164 | 0658:2e94 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
165 | 0658:2ea4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
166 | 0658:2eb4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
167 | 0658:2ec4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
168 | 0658:2ed4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
169 | 0658:2ee4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
170 | 0658:2ef4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
171 | 0658:2f04 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
172 | 0658:2f14 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
173 | 0658:2f24 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
174 | 0658:2f34 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
175 | 0658:2f44 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
176 | 0658:2f54 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
177 | 0658:2f64 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
178 | 0658:2f74 00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 20 ............... |
---|
179 | [93027] found device 0.1.0: removable = 0, dev_type = 0, atapi = 0, ncq_max = 1 |
---|
180 | [93027] ahci_stop_port 0.1 |
---|
181 | [93027] ahci_scan_ports: Wait till not busy on port 2 |
---|
182 | [93027] ahci_reset_port: resetting port 0.2 |
---|
183 | [93027] AHCI port 2 registers: |
---|
184 | PORT_CMD = 0x140006 |
---|
185 | command engine status: |
---|
186 | PORT_SCR_ACT = 0x0 |
---|
187 | PORT_CMD_ISSUE = 0x0 |
---|
188 | link/device status: |
---|
189 | PORT_SCR_STAT = 0x0 |
---|
190 | PORT_SCR_CTL = 0x0 |
---|
191 | PORT_SCR_ERR = 0x0 |
---|
192 | PORT_TFDATA = 0x7f |
---|
193 | interrupt status: |
---|
194 | PORT_IRQ_STAT = 0x0 |
---|
195 | PORT_IRQ_MASK = 0x0 |
---|
196 | HOST_IRQ_STAT = 0x0 |
---|
197 | [93027] ahci_stop_port 0.2 |
---|
198 | [93027] ahci_reset_port: setting link speed and power management options |
---|
199 | [93027] ahci_reset_port: issuing COMRESET on port 2 |
---|
200 | [93115] Wait for communication... |
---|
201 | [93625] no device present after resetting port #2 (PORT_SCR_STAT = 0x0) |
---|
202 | [93625] ahci_stop_port 0.2 |
---|
203 | [93625] ahci_scan_ports: Wait till not busy on port 3 |
---|
204 | [93625] ahci_reset_port: resetting port 0.3 |
---|
205 | [93625] AHCI port 3 registers: |
---|
206 | PORT_CMD = 0x150006 |
---|
207 | command engine status: |
---|
208 | PORT_SCR_ACT = 0x0 |
---|
209 | PORT_CMD_ISSUE = 0x0 |
---|
210 | link/device status: |
---|
211 | PORT_SCR_STAT = 0x123 |
---|
212 | PORT_SCR_CTL = 0x0 |
---|
213 | PORT_SCR_ERR = 0x4000000 |
---|
214 | PORT_TFDATA = 0x0 |
---|
215 | interrupt status: |
---|
216 | PORT_IRQ_STAT = 0x40 |
---|
217 | PORT_IRQ_MASK = 0x0 |
---|
218 | HOST_IRQ_STAT = 0x0 |
---|
219 | [93625] ahci_stop_port 0.3 |
---|
220 | [93625] ahci_reset_port: setting link speed and power management options |
---|
221 | [93625] ahci_reset_port: issuing COMRESET on port 3 |
---|
222 | [93712] Wait for communication... |
---|
223 | [93712] ahci_reset_port: starting port 3 again |
---|
224 | [93712] ahci_start_port 0.3 |
---|
225 | [93712] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
226 | [93712] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
227 | [93712] ahci_reset_port: PORT_TFDATA = 0x170 |
---|
228 | [93712] ahci_scan_ports: port 3 seems to be attached to a device; probing... |
---|
229 | [93712] ATA command for 0.3.0, slot 0: |
---|
230 | [93712] cmd_hdr: 0678:7800 05 00 01 00 00 00 00 00-00 2d df 00 00 00 00 00 .........-...... |
---|
231 | [93712] ata_cmd: 1530:4ccc 00 00 00 00 00 00 00 00-00 00 ec 00 ............ |
---|
232 | [93712] sg_list: 0678:7d80 84 1d e7 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
233 | [93712] executing polled cmd...[93712] success |
---|
234 | [93712] ATA_IDENTIFY results: |
---|
235 | 0658:2d84 40 00 ff 3f 00 00 10 00-00 00 00 02 3f 00 00 00 @..?........?... |
---|
236 | 0658:2d94 00 00 00 00 42 56 62 36-39 38 33 35 31 61 61 2d ....BVb698351aa- |
---|
237 | 0658:2da4 64 62 66 63 65 34 20 35-03 00 00 02 00 00 2e 31 dbfce4 5.......1 |
---|
238 | 0658:2db4 20 30 20 20 20 20 42 56-58 4f 48 20 52 41 44 44 0 BVXOH RADD |
---|
239 | 0658:2dc4 53 49 20 4b 20 20 20 20-20 20 20 20 20 20 20 20 SI K |
---|
240 | 0658:2dd4 20 20 20 20 20 20 20 20-20 20 20 20 20 20 80 80 .. |
---|
241 | 0658:2de4 01 00 00 0b 00 40 f0 00-f0 00 07 00 ff 3f 10 00 .....@.......?.. |
---|
242 | 0658:2df4 3f 00 10 fc fb 00 80 01-00 00 00 04 00 00 07 00 ?............... |
---|
243 | 0658:2e04 03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00 ..x.x.x.x....... |
---|
244 | 0658:2e14 00 00 00 00 00 00 1f 00-04 01 00 00 00 00 00 00 ................ |
---|
245 | 0658:2e24 7e 00 22 00 68 00 00 74-00 40 68 00 00 34 00 40 ~.".h..t.@h..4.@ |
---|
246 | 0658:2e34 7f 40 00 00 00 00 00 00-00 00 00 00 00 00 00 00 @.............. |
---|
247 | 0658:2e44 00 00 00 00 00 00 00 00-00 00 00 04 00 00 00 00 ................ |
---|
248 | 0658:2e54 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
249 | 0658:2e64 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
250 | 0658:2e74 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
251 | 0658:2e84 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
252 | 0658:2e94 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
253 | 0658:2ea4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
254 | 0658:2eb4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
255 | 0658:2ec4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
256 | 0658:2ed4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
257 | 0658:2ee4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
258 | 0658:2ef4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
259 | 0658:2f04 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
260 | 0658:2f14 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
261 | 0658:2f24 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
262 | 0658:2f34 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
263 | 0658:2f44 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
264 | 0658:2f54 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
265 | 0658:2f64 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
266 | 0658:2f74 00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 f4 ................ |
---|
267 | [93712] found device 0.3.0: removable = 0, dev_type = 0, atapi = 0, ncq_max = 1 |
---|
268 | [93712] ahci_stop_port 0.3 |
---|
269 | [93712] ahci_scan_ports: Wait till not busy on port 4 |
---|
270 | [93712] ahci_reset_port: resetting port 0.4 |
---|
271 | [93712] AHCI port 4 registers: |
---|
272 | PORT_CMD = 0x154016 |
---|
273 | command engine status: |
---|
274 | PORT_SCR_ACT = 0x0 |
---|
275 | PORT_CMD_ISSUE = 0x0 |
---|
276 | link/device status: |
---|
277 | PORT_SCR_STAT = 0x123 |
---|
278 | PORT_SCR_CTL = 0x0 |
---|
279 | PORT_SCR_ERR = 0x0 |
---|
280 | PORT_TFDATA = 0x50 |
---|
281 | interrupt status: |
---|
282 | PORT_IRQ_STAT = 0x0 |
---|
283 | PORT_IRQ_MASK = 0x0 |
---|
284 | HOST_IRQ_STAT = 0x0 |
---|
285 | [93712] ahci_stop_port 0.4 |
---|
286 | [93712] ahci_reset_port: setting link speed and power management options |
---|
287 | [93712] ahci_reset_port: issuing COMRESET on port 4 |
---|
288 | [93800] Wait for communication... |
---|
289 | [93800] ahci_reset_port: starting port 4 again |
---|
290 | [93800] ahci_start_port 0.4 |
---|
291 | [93800] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
292 | [93800] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
293 | [93800] ahci_reset_port: PORT_TFDATA = 0x170 |
---|
294 | [93800] ahci_scan_ports: port 4 seems to be attached to a device; probing... |
---|
295 | [93800] ATA command for 0.4.0, slot 0: |
---|
296 | [93800] cmd_hdr: 0680:0000 05 00 01 00 00 00 00 00-00 a5 df 00 00 00 00 00 ................ |
---|
297 | [93800] ata_cmd: 1530:4ccc 00 00 00 00 00 00 00 00-00 00 ec 00 ............ |
---|
298 | [93800] sg_list: 0680:0580 84 1d e7 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
299 | [93800] executing polled cmd...[93800] success |
---|
300 | [93800] ATA_IDENTIFY results: |
---|
301 | 0658:2d84 40 00 ff 3f 00 00 10 00-00 00 00 02 3f 00 00 00 @..?........?... |
---|
302 | 0658:2d94 00 00 00 00 42 56 39 62-37 63 31 35 62 31 36 2d ....BV9b7c15b16- |
---|
303 | 0658:2da4 61 66 39 66 37 64 20 32-03 00 00 02 00 00 2e 31 af9f7d 2.......1 |
---|
304 | 0658:2db4 20 30 20 20 20 20 42 56-58 4f 48 20 52 41 44 44 0 BVXOH RADD |
---|
305 | 0658:2dc4 53 49 20 4b 20 20 20 20-20 20 20 20 20 20 20 20 SI K |
---|
306 | 0658:2dd4 20 20 20 20 20 20 20 20-20 20 20 20 20 20 80 80 .. |
---|
307 | 0658:2de4 01 00 00 0b 00 40 f0 00-f0 00 07 00 ff 3f 10 00 .....@.......?.. |
---|
308 | 0658:2df4 3f 00 10 fc fb 00 80 01-b0 c2 e7 0e 00 00 07 00 ?............... |
---|
309 | 0658:2e04 03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00 ..x.x.x.x....... |
---|
310 | 0658:2e14 00 00 00 00 00 00 1f 00-04 01 00 00 00 00 00 00 ................ |
---|
311 | 0658:2e24 7e 00 22 00 68 00 00 74-00 40 68 00 00 34 00 40 ~.".h..t.@h..4.@ |
---|
312 | 0658:2e34 7f 40 00 00 00 00 00 00-00 00 00 00 00 00 00 00 @.............. |
---|
313 | 0658:2e44 00 00 00 00 00 00 00 00-b0 c2 e7 0e 00 00 00 00 ................ |
---|
314 | 0658:2e54 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
315 | 0658:2e64 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
316 | 0658:2e74 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
317 | 0658:2e84 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
318 | 0658:2e94 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
319 | 0658:2ea4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
320 | 0658:2eb4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
321 | 0658:2ec4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
322 | 0658:2ed4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
323 | 0658:2ee4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
324 | 0658:2ef4 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
325 | 0658:2f04 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
326 | 0658:2f14 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
327 | 0658:2f24 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
328 | 0658:2f34 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
329 | 0658:2f44 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
330 | 0658:2f54 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
331 | 0658:2f64 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
332 | 0658:2f74 00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 58 ...............X |
---|
333 | [93802] found device 0.4.0: removable = 0, dev_type = 0, atapi = 0, ncq_max = 1 |
---|
334 | [93802] ahci_stop_port 0.4 |
---|
335 | [93802] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
336 | [93802] IORB 06b0:03d0 removed (queue = 0658:5824) |
---|
337 | [93802] IORB 06b0:03d0 complete (status = 0x0001, error = 0x0000) |
---|
338 | [93802] IORB 06b0:03d0 queued (cmd = 1/1, queue = 0658:5824 [driver], timeout = 0) |
---|
339 | [93802] IORB 06b0:03d0 removed (queue = 0658:5824) |
---|
340 | [93802] IORB 06b0:03d0 complete (status = 0x0001, error = 0x0000) |
---|
341 | [93857] IORB 06c0:c56c queued (cmd = 1/1, queue = 0658:5824 [driver], timeout = 0) |
---|
342 | [93857] IORB 06c0:c56c removed (queue = 0658:5824) |
---|
343 | [93857] IORB 06c0:c56c complete (status = 0x0001, error = 0x0000) |
---|
344 | [93857] IORB 06c0:c56c queued (cmd = 2/1, queue = 0658:5a5e [port], timeout = 0) |
---|
345 | [93857] IORB 06c0:c56c removed (queue = 0658:5a5e) |
---|
346 | [93857] IORB 06c0:c56c complete (status = 0x0001, error = 0x0000) |
---|
347 | [93857] IORB 06c0:c56c queued (cmd = 2/1, queue = 0658:5ba2 [port], timeout = 0) |
---|
348 | [93857] IORB 06c0:c56c removed (queue = 0658:5ba2) |
---|
349 | [93857] IORB 06c0:c56c complete (status = 0x0001, error = 0x0000) |
---|
350 | [93857] IORB 06c0:c56c queued (cmd = 2/1, queue = 0658:5c44 [port], timeout = 0) |
---|
351 | [93857] IORB 06c0:c56c removed (queue = 0658:5c44) |
---|
352 | [93857] IORB 06c0:c56c complete (status = 0x0001, error = 0x0000) |
---|
353 | [93857] IORB 06c0:c56c queued (cmd = 3/3, queue = 0658:5a5e [port], timeout = 0) |
---|
354 | [93857] ahci_get_geometry(0.1.0) |
---|
355 | [93857] ahci_reset_port: resetting port 0.1 |
---|
356 | [93857] AHCI port 1 registers: |
---|
357 | PORT_CMD = 0x150006 |
---|
358 | command engine status: |
---|
359 | PORT_SCR_ACT = 0x0 |
---|
360 | PORT_CMD_ISSUE = 0x0 |
---|
361 | link/device status: |
---|
362 | PORT_SCR_STAT = 0x123 |
---|
363 | PORT_SCR_CTL = 0x0 |
---|
364 | PORT_SCR_ERR = 0x0 |
---|
365 | PORT_TFDATA = 0x0 |
---|
366 | interrupt status: |
---|
367 | PORT_IRQ_STAT = 0x0 |
---|
368 | PORT_IRQ_MASK = 0x0 |
---|
369 | HOST_IRQ_STAT = 0x0 |
---|
370 | [93857] ahci_stop_port 0.1 |
---|
371 | [93857] ahci_reset_port: setting link speed and power management options |
---|
372 | [93857] ahci_reset_port: issuing COMRESET on port 1 |
---|
373 | [93945] Wait for communication... |
---|
374 | [93945] ahci_reset_port: starting port 1 again |
---|
375 | [93945] ahci_start_port 0.1 |
---|
376 | [93945] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
377 | [93945] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
378 | [93945] ahci_reset_port: PORT_TFDATA = 0x170 |
---|
379 | [93945] ATA command for 0.1.0, slot 0: |
---|
380 | [93945] cmd_hdr: 0670:7800 05 00 01 00 00 00 00 00-00 3d de 00 00 00 00 00 .........=...... |
---|
381 | [93945] ata_cmd: 1530:4ccc 00 00 00 00 00 00 00 00-00 00 ec 00 ............ |
---|
382 | [93945] sg_list: 0670:7d80 04 1e e7 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
383 | [93945] executing polled cmd on slot 0...[93945] timeout for IORB 06c0:c56c[93945] |
---|
384 | [93945] ahci_stop_port 0.1 |
---|
385 | [93945] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
386 | [93947] IORB 06c0:c56c removed (queue = 0658:5a5e) |
---|
387 | [93947] IORB 06c0:c56c complete (status = 0x0003, error = 0x8506) |
---|
388 | [93947] IORB 06c0:c56c queued (cmd = 4/1, queue = 0658:5a5e [port], timeout = 0) |
---|
389 | [93947] ahci_read(0.1.0, 0, 1) |
---|
390 | [93947] ahci_reset_port: resetting port 0.1 |
---|
391 | [93947] AHCI port 1 registers: |
---|
392 | PORT_CMD = 0x150006 |
---|
393 | command engine status: |
---|
394 | PORT_SCR_ACT = 0x0 |
---|
395 | PORT_CMD_ISSUE = 0x0 |
---|
396 | link/device status: |
---|
397 | PORT_SCR_STAT = 0x123 |
---|
398 | PORT_SCR_CTL = 0x0 |
---|
399 | PORT_SCR_ERR = 0x0 |
---|
400 | PORT_TFDATA = 0x0 |
---|
401 | interrupt status: |
---|
402 | PORT_IRQ_STAT = 0x0 |
---|
403 | PORT_IRQ_MASK = 0x0 |
---|
404 | HOST_IRQ_STAT = 0x0 |
---|
405 | [93947] ahci_stop_port 0.1 |
---|
406 | [93947] ahci_reset_port: setting link speed and power management options |
---|
407 | [93947] ahci_reset_port: issuing COMRESET on port 1 |
---|
408 | [94033] Wait for communication... |
---|
409 | [94033] ahci_reset_port: starting port 1 again |
---|
410 | [94033] ahci_start_port 0.1 |
---|
411 | [94033] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
412 | [94033] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
413 | [94033] ahci_reset_port: PORT_TFDATA = 0x170 |
---|
414 | [94033] ATA command for 0.1.0, slot 0: |
---|
415 | [94033] cmd_hdr: 0670:7800 05 00 01 00 00 00 00 00-00 3d de 00 00 00 00 00 .........=...... |
---|
416 | [94033] ata_cmd: 1530:4a28 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@ |
---|
417 | [94033] sg_list: 0670:7d80 10 46 dc 00 00 00 00 00-00 00 00 00 ff 01 00 00 .F.............. |
---|
418 | [94033] executing polled cmd on slot 0...[94062] ata_read_pp(): blocks transferred = 1 |
---|
419 | [94062] |
---|
420 | [94062] ahci_stop_port 0.1 |
---|
421 | [94062] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
422 | [94062] IORB 06c0:c56c removed (queue = 0658:5a5e) |
---|
423 | [94062] IORB 06c0:c56c complete (status = 0x0001, error = 0x0000) |
---|
424 | [94062] IORB 06c0:c56c queued (cmd = 4/1, queue = 0658:5a5e [port], timeout = 0) |
---|
425 | [94062] ahci_read(0.1.0, 1008, 1) |
---|
426 | [94062] ahci_reset_port: resetting port 0.1 |
---|
427 | [94062] AHCI port 1 registers: |
---|
428 | PORT_CMD = 0x150006 |
---|
429 | command engine status: |
---|
430 | PORT_SCR_ACT = 0x0 |
---|
431 | PORT_CMD_ISSUE = 0x0 |
---|
432 | link/device status: |
---|
433 | PORT_SCR_STAT = 0x123 |
---|
434 | PORT_SCR_CTL = 0x0 |
---|
435 | PORT_SCR_ERR = 0x0 |
---|
436 | PORT_TFDATA = 0x50 |
---|
437 | interrupt status: |
---|
438 | PORT_IRQ_STAT = 0x0 |
---|
439 | PORT_IRQ_MASK = 0x0 |
---|
440 | HOST_IRQ_STAT = 0x0 |
---|
441 | [94062] ahci_stop_port 0.1 |
---|
442 | [94062] ahci_reset_port: setting link speed and power management options |
---|
443 | [94062] ahci_reset_port: issuing COMRESET on port 1 |
---|
444 | [94150] Wait for communication... |
---|
445 | [94150] ahci_reset_port: starting port 1 again |
---|
446 | [94150] ahci_start_port 0.1 |
---|
447 | [94150] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
448 | [94150] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
449 | [94150] ahci_reset_port: PORT_TFDATA = 0x170 |
---|
450 | [94150] ATA command for 0.1.0, slot 0: |
---|
451 | [94150] cmd_hdr: 0670:7800 05 00 01 00 00 00 00 00-00 3d de 00 00 00 00 00 .........=...... |
---|
452 | [94150] ata_cmd: 1530:480e 00 00 01 00 f0 03 00 00-00 00 c8 40 ...........@ |
---|
453 | [94150] sg_list: 0670:7d80 10 46 dc 00 00 00 00 00-00 00 00 00 ff 01 00 00 .F.............. |
---|
454 | [94150] executing polled cmd on slot 0...[94156] ata_read_pp(): blocks transferred = 1 |
---|
455 | [94156] |
---|
456 | [94156] ahci_stop_port 0.1 |
---|
457 | [94156] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
458 | [94156] IORB 06c0:c56c removed (queue = 0658:5a5e) |
---|
459 | [94156] IORB 06c0:c56c complete (status = 0x0001, error = 0x0000) |
---|
460 | [94156] IORB 06c0:c56c queued (cmd = 4/1, queue = 0658:5a5e [port], timeout = 0) |
---|
461 | [94156] ahci_read(0.1.0, 1008, 1) |
---|
462 | [94156] ahci_reset_port: resetting port 0.1 |
---|
463 | [94156] AHCI port 1 registers: |
---|
464 | PORT_CMD = 0x150006 |
---|
465 | command engine status: |
---|
466 | PORT_SCR_ACT = 0x0 |
---|
467 | PORT_CMD_ISSUE = 0x0 |
---|
468 | link/device status: |
---|
469 | PORT_SCR_STAT = 0x123 |
---|
470 | PORT_SCR_CTL = 0x0 |
---|
471 | PORT_SCR_ERR = 0x0 |
---|
472 | PORT_TFDATA = 0x50 |
---|
473 | interrupt status: |
---|
474 | PORT_IRQ_STAT = 0x0 |
---|
475 | PORT_IRQ_MASK = 0x0 |
---|
476 | HOST_IRQ_STAT = 0x0 |
---|
477 | [94156] ahci_stop_port 0.1 |
---|
478 | [94156] ahci_reset_port: setting link speed and power management options |
---|
479 | [94156] ahci_reset_port: issuing COMRESET on port 1 |
---|
480 | [94244] Wait for communication... |
---|
481 | [94244] ahci_reset_port: starting port 1 again |
---|
482 | [94244] ahci_start_port 0.1 |
---|
483 | [94244] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
484 | [94244] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
485 | [94244] ahci_reset_port: PORT_TFDATA = 0x170 |
---|
486 | [94244] ATA command for 0.1.0, slot 0: |
---|
487 | [94244] cmd_hdr: 0670:7800 05 00 01 00 00 00 00 00-00 3d de 00 00 00 00 00 .........=...... |
---|
488 | [94244] ata_cmd: 1530:47fa 00 00 01 00 f0 03 00 00-00 00 c8 40 ...........@ |
---|
489 | [94244] sg_list: 0670:7d80 10 46 dc 00 00 00 00 00-00 00 00 00 ff 01 00 00 .F.............. |
---|
490 | [94244] executing polled cmd on slot 0...[94250] ata_read_pp(): blocks transferred = 1 |
---|
491 | [94250] |
---|
492 | [94250] ahci_stop_port 0.1 |
---|
493 | [94250] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
494 | [94250] IORB 06c0:c56c removed (queue = 0658:5a5e) |
---|
495 | [94250] IORB 06c0:c56c complete (status = 0x0001, error = 0x0000) |
---|
496 | [94250] IORB 06c0:c56c queued (cmd = 4/1, queue = 0658:5a5e [port], timeout = 0) |
---|
497 | [94250] ahci_read(0.1.0, 1008, 1) |
---|
498 | [94250] ahci_reset_port: resetting port 0.1 |
---|
499 | [94250] AHCI port 1 registers: |
---|
500 | PORT_CMD = 0x150006 |
---|
501 | command engine status: |
---|
502 | PORT_SCR_ACT = 0x0 |
---|
503 | PORT_CMD_ISSUE = 0x0 |
---|
504 | link/device status: |
---|
505 | PORT_SCR_STAT = 0x123 |
---|
506 | PORT_SCR_CTL = 0x0 |
---|
507 | PORT_SCR_ERR = 0x0 |
---|
508 | PORT_TFDATA = 0x50 |
---|
509 | interrupt status: |
---|
510 | PORT_IRQ_STAT = 0x0 |
---|
511 | PORT_IRQ_MASK = 0x0 |
---|
512 | HOST_IRQ_STAT = 0x0 |
---|
513 | [94250] ahci_stop_port 0.1 |
---|
514 | [94250] ahci_reset_port: setting link speed and power management options |
---|
515 | [94250] ahci_reset_port: issuing COMRESET on port 1 |
---|
516 | [94337] Wait for communication... |
---|
517 | [94337] ahci_reset_port: starting port 1 again |
---|
518 | [94337] ahci_start_port 0.1 |
---|
519 | [94337] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
520 | [94337] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
521 | [94337] ahci_reset_port: PORT_TFDATA = 0x170 |
---|
522 | [94337] ATA command for 0.1.0, slot 0: |
---|
523 | [94337] cmd_hdr: 0670:7800 05 00 01 00 00 00 00 00-00 3d de 00 00 00 00 00 .........=...... |
---|
524 | [94337] ata_cmd: 1530:480e 00 00 01 00 f0 03 00 00-00 00 c8 40 ...........@ |
---|
525 | [94337] sg_list: 0670:7d80 10 46 dc 00 00 00 00 00-00 00 00 00 ff 01 00 00 .F.............. |
---|
526 | [94337] executing polled cmd on slot 0...[94343] ata_read_pp(): blocks transferred = 1 |
---|
527 | [94343] |
---|
528 | [94343] ahci_stop_port 0.1 |
---|
529 | [94343] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
530 | [94343] IORB 06c0:c56c removed (queue = 0658:5a5e) |
---|
531 | [94343] IORB 06c0:c56c complete (status = 0x0001, error = 0x0000) |
---|
532 | [94343] IORB 06c0:c56c queued (cmd = 4/1, queue = 0658:5a5e [port], timeout = 0) |
---|
533 | [94343] ahci_read(0.1.0, 1071, 1) |
---|
534 | [94343] ahci_reset_port: resetting port 0.1 |
---|
535 | [94343] AHCI port 1 registers: |
---|
536 | PORT_CMD = 0x150006 |
---|
537 | command engine status: |
---|
538 | PORT_SCR_ACT = 0x0 |
---|
539 | PORT_CMD_ISSUE = 0x0 |
---|
540 | link/device status: |
---|
541 | PORT_SCR_STAT = 0x123 |
---|
542 | PORT_SCR_CTL = 0x0 |
---|
543 | PORT_SCR_ERR = 0x0 |
---|
544 | PORT_TFDATA = 0x50 |
---|
545 | interrupt status: |
---|
546 | PORT_IRQ_STAT = 0x0 |
---|
547 | PORT_IRQ_MASK = 0x0 |
---|
548 | HOST_IRQ_STAT = 0x0 |
---|
549 | [94343] ahci_stop_port 0.1 |
---|
550 | [94343] ahci_reset_port: setting link speed and power management options |
---|
551 | [94343] ahci_reset_port: issuing COMRESET on port 1 |
---|
552 | [94431] Wait for communication... |
---|
553 | [94431] ahci_reset_port: starting port 1 again |
---|
554 | [94431] ahci_start_port 0.1 |
---|
555 | [94431] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
556 | [94431] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
557 | [94431] ahci_reset_port: PORT_TFDATA = 0x170 |
---|
558 | [94431] ATA command for 0.1.0, slot 0: |
---|
559 | [94431] cmd_hdr: 0670:7800 05 00 01 00 00 00 00 00-00 3d de 00 00 00 00 00 .........=...... |
---|
560 | [94431] ata_cmd: 1530:47fa 00 00 01 00 2f 04 00 00-00 00 c8 40 ..../......@ |
---|
561 | [94431] sg_list: 0670:7d80 10 46 dc 00 00 00 00 00-00 00 00 00 ff 01 00 00 .F.............. |
---|
562 | [94431] executing polled cmd on slot 0...[94437] ata_read_pp(): blocks transferred = 1 |
---|
563 | [94437] |
---|
564 | [94437] ahci_stop_port 0.1 |
---|
565 | [94437] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
566 | [94437] IORB 06c0:c56c removed (queue = 0658:5a5e) |
---|
567 | [94437] IORB 06c0:c56c complete (status = 0x0001, error = 0x0000) |
---|
568 | [94437] IORB 06c0:c56c queued (cmd = 3/3, queue = 0658:5ba2 [port], timeout = 0) |
---|
569 | [94437] ahci_get_geometry(0.3.0) |
---|
570 | [94437] ahci_reset_port: resetting port 0.3 |
---|
571 | [94437] AHCI port 3 registers: |
---|
572 | PORT_CMD = 0x150006 |
---|
573 | command engine status: |
---|
574 | PORT_SCR_ACT = 0x0 |
---|
575 | PORT_CMD_ISSUE = 0x0 |
---|
576 | link/device status: |
---|
577 | PORT_SCR_STAT = 0x123 |
---|
578 | PORT_SCR_CTL = 0x0 |
---|
579 | PORT_SCR_ERR = 0x0 |
---|
580 | PORT_TFDATA = 0x0 |
---|
581 | interrupt status: |
---|
582 | PORT_IRQ_STAT = 0x0 |
---|
583 | PORT_IRQ_MASK = 0x0 |
---|
584 | HOST_IRQ_STAT = 0x0 |
---|
585 | [94437] ahci_stop_port 0.3 |
---|
586 | [94437] ahci_reset_port: setting link speed and power management options |
---|
587 | [94437] ahci_reset_port: issuing COMRESET on port 3 |
---|
588 | [94525] Wait for communication... |
---|
589 | [94525] ahci_reset_port: starting port 3 again |
---|
590 | [94525] ahci_start_port 0.3 |
---|
591 | [94525] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
592 | [94525] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
593 | [94525] ahci_reset_port: PORT_TFDATA = 0x170 |
---|
594 | [94525] ATA command for 0.3.0, slot 0: |
---|
595 | [94525] cmd_hdr: 0678:7800 05 00 01 00 00 00 00 00-00 2d df 00 00 00 00 00 .........-...... |
---|
596 | [94525] ata_cmd: 1530:4ccc 00 00 00 00 00 00 00 00-00 00 ec 00 ............ |
---|
597 | [94525] sg_list: 0678:7d80 04 1e e7 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
598 | [94525] executing polled cmd on slot 0...[94525] timeout for IORB 06c0:c56c[94525] |
---|
599 | [94525] ahci_stop_port 0.3 |
---|
600 | [94525] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
601 | [94525] IORB 06c0:c56c removed (queue = 0658:5ba2) |
---|
602 | [94525] IORB 06c0:c56c complete (status = 0x0003, error = 0x8506) |
---|
603 | [94525] IORB 06c0:c56c queued (cmd = 4/1, queue = 0658:5ba2 [port], timeout = 0) |
---|
604 | [94525] ahci_read(0.3.0, 0, 1) |
---|
605 | [94525] ahci_reset_port: resetting port 0.3 |
---|
606 | [94525] AHCI port 3 registers: |
---|
607 | PORT_CMD = 0x150006 |
---|
608 | command engine status: |
---|
609 | PORT_SCR_ACT = 0x0 |
---|
610 | PORT_CMD_ISSUE = 0x0 |
---|
611 | link/device status: |
---|
612 | PORT_SCR_STAT = 0x123 |
---|
613 | PORT_SCR_CTL = 0x0 |
---|
614 | PORT_SCR_ERR = 0x0 |
---|
615 | PORT_TFDATA = 0x0 |
---|
616 | interrupt status: |
---|
617 | PORT_IRQ_STAT = 0x0 |
---|
618 | PORT_IRQ_MASK = 0x0 |
---|
619 | HOST_IRQ_STAT = 0x0 |
---|
620 | [94525] ahci_stop_port 0.3 |
---|
621 | [94525] ahci_reset_port: setting link speed and power management options |
---|
622 | [94525] ahci_reset_port: issuing COMRESET on port 3 |
---|
623 | [94613] Wait for communication... |
---|
624 | [94613] ahci_reset_port: starting port 3 again |
---|
625 | [94613] ahci_start_port 0.3 |
---|
626 | [94613] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
627 | [94613] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
628 | [94613] ahci_reset_port: PORT_TFDATA = 0x170 |
---|
629 | [94613] ATA command for 0.3.0, slot 0: |
---|
630 | [94613] cmd_hdr: 0678:7800 05 00 01 00 00 00 00 00-00 2d df 00 00 00 00 00 .........-...... |
---|
631 | [94613] ata_cmd: 1530:4a28 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@ |
---|
632 | [94613] sg_list: 0678:7d80 10 46 dc 00 00 00 00 00-00 00 00 00 ff 01 00 00 .F.............. |
---|
633 | [94613] executing polled cmd on slot 0...[94625] ata_read_pp(): blocks transferred = 1 |
---|
634 | [94625] |
---|
635 | [94625] ahci_stop_port 0.3 |
---|
636 | [94625] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
637 | [94625] IORB 06c0:c56c removed (queue = 0658:5ba2) |
---|
638 | [94625] IORB 06c0:c56c complete (status = 0x0001, error = 0x0000) |
---|
639 | [94625] IORB 06c0:c56c queued (cmd = 4/1, queue = 0658:5ba2 [port], timeout = 0) |
---|
640 | [94625] ahci_read(0.3.0, 16065, 1) |
---|
641 | [94625] ahci_reset_port: resetting port 0.3 |
---|
642 | [94625] AHCI port 3 registers: |
---|
643 | PORT_CMD = 0x150006 |
---|
644 | command engine status: |
---|
645 | PORT_SCR_ACT = 0x0 |
---|
646 | PORT_CMD_ISSUE = 0x0 |
---|
647 | link/device status: |
---|
648 | PORT_SCR_STAT = 0x123 |
---|
649 | PORT_SCR_CTL = 0x0 |
---|
650 | PORT_SCR_ERR = 0x0 |
---|
651 | PORT_TFDATA = 0x50 |
---|
652 | interrupt status: |
---|
653 | PORT_IRQ_STAT = 0x0 |
---|
654 | PORT_IRQ_MASK = 0x0 |
---|
655 | HOST_IRQ_STAT = 0x0 |
---|
656 | [94625] ahci_stop_port 0.3 |
---|
657 | [94625] ahci_reset_port: setting link speed and power management options |
---|
658 | [94625] ahci_reset_port: issuing COMRESET on port 3 |
---|
659 | [94712] Wait for communication... |
---|
660 | [94712] ahci_reset_port: starting port 3 again |
---|
661 | [94712] ahci_start_port 0.3 |
---|
662 | [94712] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
663 | [94712] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
664 | [94712] ahci_reset_port: PORT_TFDATA = 0x170 |
---|
665 | [94712] ATA command for 0.3.0, slot 0: |
---|
666 | [94712] cmd_hdr: 0678:7800 05 00 01 00 00 00 00 00-00 2d df 00 00 00 00 00 .........-...... |
---|
667 | [94712] ata_cmd: 1530:480e 00 00 01 00 c1 3e 00 00-00 00 c8 40 .....>.....@ |
---|
668 | [94712] sg_list: 0678:7d80 10 46 dc 00 00 00 00 00-00 00 00 00 ff 01 00 00 .F.............. |
---|
669 | [94712] executing polled cmd on slot 0...[94718] ata_read_pp(): blocks transferred = 1 |
---|
670 | [94718] |
---|
671 | [94718] ahci_stop_port 0.3 |
---|
672 | [94718] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
673 | [94718]----- Output of: type ibms506$ ------------------------------------------------------------------ |
---|
674 | R1.8.9.9 /!BIOS /VL |
---|
675 | Daniela's Bus Master IDE Driver for OS/2 Version 1.8.9.9 |
---|
676 | Controller:0 Port:01F0 IRQ:0E Status:OK BusMaster Scatter/Gather |
---|
677 | Intel PIIX4 PATA host (8086:7111 rev:01) on PCI 0:1.1#0 |
---|
678 | Unit:0 Status:OK SMS:128 LBA BusMaster UltraDMA2/PIO4 BPB |
---|
679 | Model:VBOX HARDDISK 1.0 |
---|
680 | OS2:log phys BPB/BIOS IDE:log phys Total Sectors |
---|
681 | C 16644 16644 16644 16383 Avail 16777216 |
---|
682 | H 16 16 16 16 16 OS2 16777152 |
---|
683 | S 63 63 63 63 63 % Used 99.99 |
---|
684 | Unit:1 Status:OK SMS:128 LBA BusMaster UltraDMA2/PIO4 BPB |
---|
685 | Model:VBOX HARDDISK 1.0 |
---|
686 | OS2:log phys BPB/BIOS IDE:log phys Total Sectors |
---|
687 | C 8354 65535 65535 16383 Avail 134217728 |
---|
688 | H 255 16 255 16 16 OS2 134207010 |
---|
689 | S 63 63 63 63 63 % Used 99.99 |
---|
690 | |
---|
691 | |
---|
692 | ----- Output of: D:\ecs\install\DETECTEI\PCI.EXE -N --------------------------------------------- |
---|
693 | Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005. |
---|
694 | Loaded Vendor Data : "This is version ha_merged, 11 Oct 2010 08:16:43" |
---|
695 | |
---|
696 | PCI BIOS Version 2.10 found! |
---|
697 | Number of PCI Busses : 1 |
---|
698 | PCI Characteristics : Config Mechanism 1 |
---|
699 | |
---|
700 | Searching for PCI Devices using the OEMHLP$ driver |
---|
701 | |
---|
702 | Bus 0 (PCI), Device Number 0, Device Function 0 |
---|
703 | Vendor 8086h Intel Corporation |
---|
704 | Device 1237h 440FX - 82441FX PMC [Natoma] |
---|
705 | Command 0000h (Bus Access Disabled!!) |
---|
706 | Status 0000h |
---|
707 | Revision 02h, Header Type 00h, Bus Latency Timer 00h |
---|
708 | Self test 00h (Self test not supported) |
---|
709 | PCI Class Bridge, type PCI to HOST |
---|
710 | |
---|
711 | Bus 0 (PCI), Device Number 1, Device Function 0 |
---|
712 | Vendor 8086h Intel Corporation |
---|
713 | Device 7000h 82371SB PIIX3 ISA [Natoma/Triton II] |
---|
714 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
715 | Status 0200h (Medium Timing) |
---|
716 | Revision 00h, Header Type 80h, Bus Latency Timer 00h |
---|
717 | Self test 00h (Self test not supported) |
---|
718 | PCI Class Bridge, type PCI to ISA |
---|
719 | |
---|
720 | Bus 0 (PCI), Device Number 1, Device Function 1 |
---|
721 | Vendor 8086h Intel Corporation |
---|
722 | Device 7111h 82371AB/EB/MB PIIX4 IDE |
---|
723 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
724 | Status 0000h |
---|
725 | Revision 01h, Header Type 00h, Bus Latency Timer 20h |
---|
726 | Self test 00h (Self test not supported) |
---|
727 | PCI Class Storage, type IDE (ATA) |
---|
728 | PCI EIDE Controller Features : |
---|
729 | BusMaster EIDE is supported |
---|
730 | Primary Channel is at I/O Port 01F0h and IRQ 14 |
---|
731 | Secondary Channel is at I/O Port 0170h and IRQ 15 |
---|
732 | Address 0 is not present or not configured! |
---|
733 | Address 1 is not present or not configured! |
---|
734 | Address 2 is not present or not configured! |
---|
735 | Address 3 is not present or not configured! |
---|
736 | Address 4 is an I/O Port : D000h..D007h |
---|
737 | |
---|
738 | Bus 0 (PCI), Device Number 2, Device Function 0 |
---|
739 | Vendor 80EEh InnoTek Systemberatung GmbH |
---|
740 | Device BEEFh VirtualBox Graphics Adapter |
---|
741 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
742 | Status 0000h |
---|
743 | Revision 00h, Header Type 00h, Bus Latency Timer 00h |
---|
744 | Self test 00h (Self test not supported) |
---|
745 | PCI Class Display, type VGA |
---|
746 | Address 0 is a Memory Address (0-4GiB, Prefetchable) : E0000000h |
---|
747 | System IRQ 18, INT# A |
---|
748 | |
---|
749 | Bus 0 (PCI), Device Number 4, Device Function 0 |
---|
750 | Vendor 80EEh InnoTek Systemberatung GmbH |
---|
751 | Device CAFEh VirtualBox Guest Service |
---|
752 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
753 | Status 0000h |
---|
754 | Revision 00h, Header Type 00h, Bus Latency Timer 00h |
---|
755 | Self test 00h (Self test not supported) |
---|
756 | PCI Class System, type Other |
---|
757 | Address 0 is an I/O Port : D020h |
---|
758 | Address 1 is a Memory Address (0-4GiB) : F0000000h |
---|
759 | Address 2 is a Memory Address (0-4GiB, Prefetchable) : F0400000h |
---|
760 | System IRQ 20, INT# A |
---|
761 | |
---|
762 | Bus 0 (PCI), Device Number 6, Device Function 0 |
---|
763 | Vendor 106Bh Apple Computer Inc. |
---|
764 | Device 003Fh KeyLargo/Intrepid USB |
---|
765 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
766 | Status 0010h (Has Capabilities List, Fast Timing) |
---|
767 | Revision 00h, Header Type 00h, Bus Latency Timer 00h |
---|
768 | Self test 00h (Self test not supported) |
---|
769 | PCI Class Serial, type USB (OHCI) |
---|
770 | Address 0 is a Memory Address (0-4GiB) : F0404000h |
---|
771 | System IRQ 22, INT# A |
---|
772 | New Capabilities List Present: |
---|
773 | No 'New Capabilities' Are Currently Enabled |
---|
774 | |
---|
775 | Bus 0 (PCI), Device Number 7, Device Function 0 |
---|
776 | Vendor 8086h Intel Corporation |
---|
777 | Device 7113h 82371AB/EB/MB PIIX4 ACPI |
---|
778 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
779 | Status 0280h (Supports Back-To-Back Trans., Medium Timing) |
---|
780 | Revision 08h, Header Type 80h, Bus Latency Timer 00h |
---|
781 | Self test 00h (Self test not supported) |
---|
782 | PCI Class Bridge, type PCI to Other |
---|
783 | System IRQ 9, INT# A |
---|
784 | |
---|
785 | Bus 0 (PCI), Device Number 13, Device Function 0 |
---|
786 | Vendor 8086h Intel Corporation |
---|
787 | Device 2829h 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller |
---|
788 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
789 | Status 0010h (Has Capabilities List, Fast Timing) |
---|
790 | Revision 02h, Header Type 00h, Bus Latency Timer 00h |
---|
791 | Self test 00h (Self test not supported) |
---|
792 | PCI Class Storage, type Serial ATA (AHCI 1.0) |
---|
793 | Address 0 is an I/O Port : D040h..D047h |
---|
794 | Address 1 is an I/O Port : D048h |
---|
795 | Address 2 is an I/O Port : D050h..D057h |
---|
796 | Address 3 is an I/O Port : D058h |
---|
797 | Address 4 is an I/O Port : D060h..D06Fh |
---|
798 | Address 5 is a Memory Address (0-4GiB) : F0406000h..F0407FFFh |
---|
799 | System IRQ 21, INT# A |
---|
800 | New Capabilities List Present: |
---|
801 | Power Management Capability, Version 1.2 |
---|
802 | Does not support low power State D1 or D2 |
---|
803 | Does not support PME# signalling |
---|
804 | Current Power State : D0 (Device operational, no power saving) |
---|
805 | Unknown Capability (Code 12h)!! |
---|
806 | |
---|
807 | Bus 0 (PCI), Device Number 17, Device Function 0 |
---|
808 | Vendor 8086h Intel Corporation |
---|
809 | Device 100Fh 82545EM Gigabit Ethernet Controller (Copper) |
---|
810 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
811 | Status 0230h (Has Capabilities List, Supports 66MHz, Medium Timing) |
---|
812 | Revision 02h, Header Type 00h, Bus Latency Timer 00h |
---|
813 | Minimum Bus Grant FFh, Maximum Bus Latency 00h |
---|
814 | Self test 00h (Self test not supported) |
---|
815 | PCI Class Network, type Ethernet |
---|
816 | Subsystem ID 075015ADh PRO/1000 MT Single Port Adapter |
---|
817 | Subsystem Vendor 15ADh VMware |
---|
818 | Address 0 is a Memory Address (0-4GiB) : F0420000h |
---|
819 | Address 1 is not present or not configured! |
---|
820 | Address 2 is an I/O Port : D070h |
---|
821 | System IRQ 17, INT# A |
---|
822 | New Capabilities List Present: |
---|
823 | Power Management Capability, Version 1.1 |
---|
824 | Does not support low power State D1 or D2 |
---|
825 | Does not support PME# signalling |
---|
826 | Current Power State : D0 (Device operational, no power saving) |
---|
827 | PCI-X Capability |
---|
828 | Primary AD Interface size is 32-bits wide |
---|
829 | Primary AD Bus Maximum Speed in PCI-X mode 1 is 66MHz |
---|
830 | Primary Bus is PCI-X 266 Capable : No |
---|
831 | Primary Bus is PCI-X 533 Capable : No |
---|
832 | |
---|
833 | ROM PCI IRQ routing table Tests.... |
---|
834 | ROM IRQ routing table found at F000h:F2A0h |
---|
835 | Table Version 1.0 - OK |
---|
836 | Table size 512 bytes - OK |
---|
837 | Table Checksum 31h - OK |
---|
838 | PCI Interrupt Router: 82371SB PIIX3 ISA [Natoma/Triton II] |
---|
839 | IRQ's dedicated to PCI : None |
---|
840 | The ROM PCI IRQ routing table appears to be OK. |
---|
841 | |
---|
842 | IRQ Summary: IRQs 9,14,15,17,18,20,21,22 are used by PCI devices |
---|
843 | Shared IRQs: There are no shared PCI IRQs |
---|
844 | |
---|
845 | IRQ control is currently managed by the system APIC controller - IRQ info is |
---|
846 | not actual hardware settings... |
---|