| 1 | [1318] BAR #0: type = I/O, addr = 0x00001c48, size = 8 |
|---|
| 2 | [1320] BAR #1: type = I/O, addr = 0x0000183c, size = 4 |
|---|
| 3 | [1322] BAR #2: type = I/O, addr = 0x00001c40, size = 8 |
|---|
| 4 | [1324] BAR #3: type = I/O, addr = 0x00001838, size = 4 |
|---|
| 5 | [1326] BAR #4: type = I/O, addr = 0x00001c20, size = 32 |
|---|
| 6 | [1328] BAR #5: type = MEM, addr = 0xfc226000, size = 2048 |
|---|
| 7 | [1576] calibrating delay loop... [2656] done (loops per ms = 215300) |
|---|
| 8 | [2658] Registered kernel exit routine for INT13 mode |
|---|
| 9 | [2716] IORB 0868:8f3e queued (cmd = 1/1, queue = 07d0:c8c4 [driver], timeout = 0) |
|---|
| 10 | [2718] AHCI global controller registers: |
|---|
| 11 | [2720] 00: ef20ffa3[2720] -[2722] 64bit[2722] ncq[2724] sntf[2724] sss[2726] alpm[2726] led[2728] clo[2728] pio_multi[2730] ssc[2732] part[2732] ccc[2734] sxs[2734] cmd_slots:32[2736] ports:4[2738] |
|---|
| 12 | [2738] 01: 00000000[2740] |
|---|
| 13 | [2740] 02: 00000000[2742] |
|---|
| 14 | [2744] 03: 00000003[2746] |
|---|
| 15 | [2746] 04: 00010200[2748] -[2748] |
|---|
| 16 | [2750] 05: 00010130[2751] |
|---|
| 17 | [2751] 06: 00000000[2753] |
|---|
| 18 | [2753] 07: 00000000[2755] |
|---|
| 19 | [2757] 08: 00000000[2757] |
|---|
| 20 | [2759] 09: 00000000[2761] |
|---|
| 21 | [2761] scanning ports on adapter #0 |
|---|
| 22 | [2763] resetting port 0.0 |
|---|
| 23 | [2765] command engine status: |
|---|
| 24 | [2767] PORT_SCR_ACT = 0x0 |
|---|
| 25 | [2769] PORT_CMD_ISSUE = 0x0 |
|---|
| 26 | [2771] link/device status: |
|---|
| 27 | [2773] PORT_SCR_STAT = 0x0 |
|---|
| 28 | [2775] PORT_SCR_CTL = 0x0 |
|---|
| 29 | [2777] PORT_SCR_ERR = 0x50000 |
|---|
| 30 | [2779] PORT_TFDATA = 0x7f |
|---|
| 31 | [2781] interrupt status: |
|---|
| 32 | [2783] PORT_IRQ_STAT = 0x400000 |
|---|
| 33 | [2785] PORT_IRQ_MASK = 0x0 |
|---|
| 34 | [2787] HOST_IRQ_STAT = 0x0 |
|---|
| 35 | [2789] setting link speed and power management options |
|---|
| 36 | [2791] issuing COMRESET on port |
|---|
| 37 | [7896] no device present after resetting port #0 (PORT_SCR_STAT = 0x1) |
|---|
| 38 | [7898] resetting port 0.1 |
|---|
| 39 | [7900] command engine status: |
|---|
| 40 | [7902] PORT_SCR_ACT = 0x0 |
|---|
| 41 | [7904] PORT_CMD_ISSUE = 0x0 |
|---|
| 42 | [7906] link/device status: |
|---|
| 43 | [7908] PORT_SCR_STAT = 0x1 |
|---|
| 44 | [7910] PORT_SCR_CTL = 0x0 |
|---|
| 45 | [7912] PORT_SCR_ERR = 0x4010000 |
|---|
| 46 | [7914] PORT_TFDATA = 0x80 |
|---|
| 47 | [7916] interrupt status: |
|---|
| 48 | [7917] PORT_IRQ_STAT = 0x400040 |
|---|
| 49 | [7919] PORT_IRQ_MASK = 0x0 |
|---|
| 50 | [7921] HOST_IRQ_STAT = 0x0 |
|---|
| 51 | [7923] setting link speed and power management options |
|---|
| 52 | [7925] issuing COMRESET on port |
|---|
| 53 | [13031] no device present after resetting port #1 (PORT_SCR_STAT = 0x1) |
|---|
| 54 | [13033] restoring AHCI BIOS configuration |
|---|
| 55 | [13054] IORB 0868:8f3e removed (queue = 07d0:c8c4) |
|---|
| 56 | [13056] IORB 0868:8f3e complete (status = 0x0001, error = 0x0000) |
|---|
| 57 | [15048] IORB 0868:03d0 queued (cmd = 1/1, queue = 07d0:c8c4 [driver], timeout = 0) |
|---|
| 58 | [15050] IORB 0868:03d0 removed (queue = 07d0:c8c4) |
|---|
| 59 | [15052] IORB 0868:03d0 complete (status = 0x0001, error = 0x0000) |
|---|
| 60 | [15054] IORB 0868:03d0 queued (cmd = 1/1, queue = 07d0:c8c4 [driver], timeout = 0) |
|---|
| 61 | [15056] IORB 0868:03d0 removed (queue = 07d0:c8c4) |
|---|
| 62 | [15058] IORB 0868:03d0 complete (status = 0x0001, error = 0x0000) |
|---|
| 63 | [15105] IORB 0890:c56c queued (cmd = 1/1, queue = 07d0:c8c4 [driver], timeout = 0) |
|---|
| 64 | [15107] IORB 0890:c56c removed (queue = 07d0:c8c4) |
|---|
| 65 | [15109] IORB 0890:c56c complete (status = 0x0001, error = 0x0000) |
|---|
| 66 | [15175] IORB 0968:47da queued (cmd = 1/1, queue = 07d0:c8c4 [driver], timeout = 0) |
|---|
| 67 | [15177] IORB 0968:47da removed (queue = 07d0:c8c4) |
|---|
| 68 | [15179] IORB 0968:47da complete (status = 0x0001, error = 0x0000) |
|---|
| 69 | [15181] IORB 0140:0d11 queued (cmd = 1/2, queue = 07d0:c8c4 [driver], timeout = 0) |
|---|
| 70 | [15183] leaving initialization mode |
|---|
| 71 | [15185] completing initialization of adapter #0 |
|---|
| 72 | [15187] registering interrupt #16 |
|---|
| 73 | [15189] IORB 0140:0d11 removed (queue = 07d0:c8c4) |
|---|
| 74 | [15191] IORB 0140:0d11 complete (status = 0x0001, error = 0x0000) |
|---|
| 75 | Processors Initialized: 2 |
|---|
| 76 | Integrated ACPI Support Driver for eComStation v 3.21.03 |
|---|
| 77 | Copyright (c) 2005-2012 Mensys BV |
|---|
| 78 | OS2AHCI driver version 1.25 |
|---|
| 79 | This driver is licensed for use only in conjunction with eComStation. |
|---|
| 80 | OS/2 is unable to operate your hard disk or diskette drive. |
|---|
| 81 | The system is stopped. Correct the preceding error and |
|---|
| 82 | restart the system. |
|---|
