AllocIRQMem at 0xFFE88000 (24576 bytes)

PSD_install options:" /FS /CD" @#netlabs dot org:3.3#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Sep 28 2007 12:24:23
MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
New Stack = FFD00000 Size:0x8000
AcpiOsInitialize ALLOC size 65536 at 0xF9700000
AcpiOsInitialize MapMem size 4096 at 0xFFE9D000
AcpiOsCreateLock 8
AcpiOsCreateLock 8
AcpiOsPredefinedOverride: "_REV"
AcpiOsPredefinedOverride: "_OS_"
AcpiOsPredefinedOverride: override to eComStation
AcpiOsPredefinedOverride: "_GL_"
AcpiOsCreateSemaphore: O.K. Handle=0xF97003F8 M:1 I:0
AcpiOsPredefinedOverride: "_OSI"
AcpiOsPredefinedOverride: override to eCS
*** AcpiInitializeSubsystem Status = 0 ***
AcpiOsMapMemory start 0xF9710000 map:0x40E size 0x2
AcpiOsMapMemory start 0xF9710000 map:0x9F000 size 0x400
AcpiOsMapMemory start 0xF9710000 map:0xE0000 size 0x20000
AcpiOsMapMemory start 0xF9710000 map:0xFC9B0 size 0x24
ACPI: RSDP @ 0xFC9B0/0x14 (v0 DELL  )
AcpiOsMapMemory start 0xF9710000 map:0x3FFDA7D3 size 0x24
ACPI: RSDT @ 0x3FFDA7D3/0x40 (v1 DELL  CPi R   CPi R   0x27D50913 ASL a 0x61)
AcpiOsMapMemory start 0xF9710000 map:0x3FFDA7D3 size 0x40
AcpiOsMapMemory start 0xF9710000 map:0x3FFDB400 size 0x24
ACPI: FACP @ 0x3FFDB400/0x74 (v1 DELL  CPi R   CPi R   0x27D50913 ASL a 0x61)
AcpiOsMapMemory start 0xF9710000 map:0x3FFDB400 size 0x74
AcpiOsMapMemory start 0xF9710000 map:0x3FFDC000 size 0x24
ACPI: DSDT @ 0x3FFDC000/0x2A1A (v1 INT430SYSFexxx SYSFexxx 0x1001 MSFT 0x100000E)
AcpiOsMapMemory start 0xF9710000 map:0x3FFEA800 size 0x24
ACPI: FACS @ 0x3FFEA800/0x40
AcpiOsMapMemory start 0xF9710000 map:0x3FFDBC00 size 0x24
ACPI: APIC @ 0x3FFDBC00/0x68 (v1 DELL  CPi R   CPi R   0x27D50913 ASL G 0x47)
AcpiOsMapMemory start 0xF9710000 map:0x3FFDBBC0 size 0x24
ACPI: MCFG @ 0x3FFDBBC0/0x3E (v16 DELL  CPi R   CPi R   0x27D50913 ASL a 0x61)
AcpiOsMapMemory start 0xF9710000 map:0x3FFDB7C0 size 0x24
ACPI: BOOT @ 0x3FFDB7C0/0x28 (v1 DELL  CPi R   CPi R   0x27D50913 ASL a 0x61)
AcpiOsMapMemory start 0xF9710000 map:0x3FFDABE6 size 0x24
ACPI: SSDT @ 0x3FFDABE6/0x23E (v1 PmRef Cpu0Ist 0x3000 INTL" 0x20030522)
AcpiOsMapMemory start 0xF9710000 map:0x3FFDAA0E size 0x24
ACPI: SSDT @ 0x3FFDAA0E/0x1D8 (v1 PmRef Cpu0Cst 0x3001 INTL" 0x20030522)
AcpiOsMapMemory start 0xF9710000 map:0x3FFDA813 size 0x24
ACPI: SSDT @ 0x3FFDA813/0x1FB (v1 PmRef CpuPm 0x3000 INTL" 0x20030522)
*** AcpiInitializeTables Status = 0 ***
AcpiOsMapMemory start 0xF9710000 map:0x3FFDC000 size 0x2A1A
AcpiOsTableOverride Ex:FFE85000 New:FFCFFFC4 SIG:[DSDT]
AcpiOsMapMemory start 0xF9710000 map:0x3FFDABE6 size 0x23E
AcpiOsMapMemory start 0xF9710000 map:0x3FFDAA0E size 0x1D8
AcpiOsMapMemory start 0xF9710000 map:0x3FFDA813 size 0x1FB
*** AcpiLoadTables Status = 0 ***
Table [DSDT]
Table [FACS]
Table [FACP]
Table [APIC]
AcpiOsMapMemory start 0xF9710000 map:0x3FFDBC00 size 0x68
Local APIC address: FEE00000h
System also has 8259
APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
APIC_PROCESSOR: ProcID 1h LocalApicID 1h - not usable
APIC_IO: IO ApicID 1h addr FEC00000h INTI 0
APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
Table [MCFG]
Table [BOOT]
Table [SSDT]
Table [SSDT]
Table [SSDT]
Size of FACDT 244
Type of computer - Unspecified
System vector the SCI interrupt is wired to in 8259 mode. 9
System port address of the SMI Command Port 0xB2
The value to write to SMI_CMD to disable SMI   0x70
The value to write to SMI_CMD to re-enable SMI 0x71
The value to write to SMI_CMD to enter the S4BIOS state 0x97
The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0x80
System port address of the PM1a Event Register Block 1000
System port address of the PM1b Event Register Block 0
Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
System port address of the PM1a Control Register Block 1004
System port address of the PM1b Control Register Block 0
Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
System port address of the PM2 Control Register Block 1020
Number of bytes decoded by PM2_CNT_BLK 1
System port address of the Power Management Timer Control Register Block 1008
Number of bytes decoded by PM_TMR_BLK (=4) 4
System port address of General-Purpose Event 0 Register Block 1028
System port address of General-Purpose Event 1 Register Block 0
Number of bytes decoded by GPE0_BLK 0x8
Number of bytes decoded by GPE1_BLK 0x0
Offset within the ACPI general-purpose event model where GPE1 based events start 0
GPE enable register: 0: 0: 0: 1
GPE status register: 0: 0: FF: CE
The worst-case hardware latency to enter and exit a C2 state 50 us
The worst-case hardware latency to enter and exit a C3 state 50 us
The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
The bit width of the processor's duty cycle setting value in the P_CNT register 3
The RTC CMOS RAM index to the day-of-month alarm value 13
The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
IA-PC Boot Architecture Flags 0x0
Fixed feature flags 2B5
The reset register:
Type of address space - System Memory
Register Bit Width  0
Register Bit Offset 0
Access size 0
Address 0
The value to write to the RESET_REG port to reset the system 0
***** Throttl Width 3 Offset 1
AcpiOsInstallIntterrupHandler IRQ9 handler F9730A29
AcpiOsMapMemory start 0xF9710000 map:0x3FFEA800 size 0x40
************ AcpiEnableSubsystem Status = 0
AcpiOsDerivePCIID([PCI0] ,[PIR1],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
************ Scan EC Status = 0
AcpiOsAllocate: new pool F8F30000
************ AcpiInitializeObjects mask:0 Status = 0
Processor [CPU0]
Processor [CPU1]
Status 0x0 0
************ AcpiInstallNotifyHandler System Status = 0
************ AcpiInstallNotifyHandler Device Status = 0
AcpiOsMapMemory start 0xF9710000 map:0xFEE00000 size 0x400
AcpiOsMapMemory start 0xF9710000 map:0xFEC00000 size 0x20
PSDFree: at 0xF9C00000 success!
CFG: Link [LNKC] IRQ10
0:0.0  Class:600  Hdr:0   Bridge H->0
0:1.0  Class:604  Hdr:1   Bridge 0->1
0:29.0  Class:C03  Hdr:80
0:29.1  Class:C03  Hdr:0
0:29.2  Class:C03  Hdr:0
0:29.3  Class:C03  Hdr:0
0:29.7  Class:C03  Hdr:0
0:30.0  Class:604  Hdr:81   Bridge 0->3..4
0:30.2  Class:401  Hdr:0
0:31.0  Class:601  Hdr:80
0:31.2  Class:101  Hdr:0
0:31.3  Class:C05  Hdr:0
1:0.0  Class:300  Hdr:0
3:0.0  Class:200  Hdr:0
3:1.0  Class:607  Hdr:82   Bridge 3->4
3:1.1  Class:C00  Hdr:80
3:1.2  Class:805  Hdr:80
3:3.0  Class:280  Hdr:0
PCI Bus scan: 5 PCI buses found.
Scan ACPI tree for PCI functions
0:0.0  'PCI0'' (F9702F50)
0:31.0  'ISAB#' (F9703388)
0:29.0  'USB0#' (F9703F58)
0:29.1  'USB1#' (F9704238)
0:29.2  'USB2#' (F9704498)
0:29.3  'USB4#' (F97046F8)
0:29.7  'USB3#' (F9704958)
0:31.2  'IDE0#' (F9705EB8)
0:30.2  'AUD_#' (F9707E70)
0:30.3  'MODM#' (F9707EC0)
0:1.0  'AGP_#' (F9707F38)
1:0.0  'VID_#' (F9708038)
0:30.0  'PCIE#' (F97087E8)
3:1.0  'CRD0#' (F9708910)
3:1.5  'CRD1#' (F9708A10)
Bridges found:
0:0.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (F9702F50) _PRT
0:1.0  class:604  type: 1  Bus 0->1  ACPI: 'AGP_' (F9707F38) _PRT
0:30.0  class:604  type: 1  Bus 0->3  ACPI: 'PCIE' (F97087E8) _PRT
3:1.0  class:607  type: 2  Bus 3->4  ACPI: 'CRD0' (F9708910) 
IRQLinks found:
 Apic Set: 10  Apic Set: 10  Apic Set: 10 0: 'LNKC' (F9705418)  P[ 9,*10, 11] <- 3:1.1 3:0.0 0:29.2
                       A[]
1: 'LNKB' (F97051F8)  P[ 5, 7] <- 3:3.0 3:1.2 0:31.3 0:31.2 0:29.1
                       A[]
2: 'LNKD' (F9705638)  P[ 5,*7, 9, 10, 11] <- 3:1.0 0:29.3
                       A[]
3: 'LNKA' (F9704FD8)  P[ 9, 10,*11] <- 1:0.0 0:30.2 0:29.7 0:29.0
                       A[]
PCI devices found:
0:0.0  8086:2590  'PCI0'
0:1.0  8086:2591  'AGP_'
0:29.0  8086:2658  'USB0'  IRQs: PCI:11 PIC:'LNKA':11 APIC:16
0:29.1  8086:2659  'USB1'  IRQs: PCI:10 PIC:'LNKB':0 APIC:17
0:29.2  8086:265A  'USB2'  IRQs: PCI:9 PIC:'LNKC':9 APIC:18
0:29.3  8086:265B  'USB4'  IRQs: PCI:7 PIC:'LNKD':7 APIC:19
0:29.7  8086:265C  'USB3'  IRQs: PCI:11 PIC:'LNKA':11 APIC:16
0:30.0  8086:2448  'PCIE'
0:30.2  8086:266E  'AUD_'  IRQs: PCI:11 PIC:'LNKA':11 APIC:16
0:31.0  8086:2641  'ISAB'
0:31.2  8086:2653  'IDE0'  IRQs: PCI:10 PIC:'LNKB':0 APIC:17
0:31.3  8086:266A          IRQs: PCI:10 PIC:'LNKB':0 APIC:17
1:0.0  1002:5460  'VID_'  IRQs: PCI:11 PIC:'LNKA':11 APIC:16 MSI
3:0.0  14E4:170C          IRQs: PCI:9 PIC:'LNKC':9 APIC:18
3:1.0  1180:476  'CRD0'  IRQs: PCI:0 PIC:'LNKD':7 APIC:19
3:1.1  1180:552          IRQs: PCI:9 PIC:'LNKC':9 APIC:18
3:1.2  1180:822          IRQs: PCI:10 PIC:'LNKB':0 APIC:17
3:3.0  8086:4220          IRQs: PCI:10 PIC:'LNKB':0 APIC:17
************ AcpiInstall Power Device Status = 0
ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320]
ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320]
************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
************ AcpiInstall PMTimer Device Status = 0
** Total use:97600 unuse:11976 count:1513 **
Get GpeHdl Status = 0 - AE_OK
Event [_L1D]
Install GPE 1D  Status 0
Set type GPE 1D  Status 0
Event [_L1C]
Install GPE 1C  Status 0
Set type GPE 1C  Status 0
Event [_L0B]
Install GPE B  Status 0
Set type GPE B  Status 0
Event [_L18]
Install GPE 18  Status 0
Set type GPE 18  Status 0
Event [_L03]
Install GPE 3  Status 0
Set type GPE 3  Status 0
Event [_L04]
Install GPE 4  Status 0
Set type GPE 4  Status 0
Event [_L0C]
Install GPE C  Status 0
Set type GPE C  Status 0
Event [_L0D]
Install GPE D  Status 0
Set type GPE D  Status 0
Event [_L0E]
Install GPE E  Status 0
Set type GPE E  Status 0
Event [_L05]
Install GPE 5  Status 0
Set type GPE 5  Status 0
EndScan GPE Status 0
===== Info ========
Int Level 9
In Xrupt F970C2C0 in arg F970C2C0
      Node
Name [_GPE]
Flags: 0
Reg count 4
GPE0 Status:1028 Enable:102C EnableWake:0 EnableRun:38 BaseGPENumber:0
GPE1 Status:1029 Enable:102D EnableWake:0 EnableRun:78 BaseGPENumber:8
GPE2 Status:102A Enable:102E EnableWake:0 EnableRun:0 BaseGPENumber:10
GPE3 Status:102B Enable:102F EnableWake:0 EnableRun:31 BaseGPENumber:18
=========== Status 0x0 0
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** Device Notify ***
Dev: [AC__] Value:80
************ Leave Sleep Status = 0x5 - AE_NOT_FOUND
APM: PSD find success. PSD Ftable:F9C101C0
Register Notify 1st FFCB718E 
FindPCIDevice
 Need: B:0 D:1F F:2
Finding APIC17 PIC10 Dev: [IDE0]
Gradd: PSD find success. PSD Ftable:F9C101C0
APM: Found AC "AC__"
APM: Found Smart Battery "BAT0"
******** Event tread ***************
APM: Unsetting suspend state
******** Notify wait Counter 0 ***************
