
                                  OS/2
          (C) Copyright IBM Corp. 1987, 2001.  All rights reserved.
  US Government Users Restricted Rights - Use, duplication or disclosure
            restricted by GSA ADP Schedule Contract with IBM Corp.
Internal revision 14.104b_SMP
Symbols linked (acpi)
--:--:-- KEE Version 0x10000
--:--:-- 
PSD_install options:" /SMP /!NOD /O1" --:--:-- @#netlabs dot org:3.16#@##1## 21 
Jun 2009 10:01:49     pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-
2009 Build date: Jun 21 2009 10:01:52
--:--:-- MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
--:--:-- New Stack = FFE30000 Size:0x8000
--:--:-- AcpiOsInitialize ALLOC size 65536 at 0xF9A90000
--:--:-- AcpiOsInitialize MapMem size 4096 at 0xFFE8A000
--:--:-- AcpiOsPredefinedOverride: "_REV"
--:--:-- AcpiOsPredefinedOverride: "_OS_"
--:--:-- AcpiOsPredefinedOverride: override to eComStation
--:--:-- AcpiOsPredefinedOverride: "_GL_"
--:--:-- AcpiOsPredefinedOverride: "_OSI"
--:--:-- ACPI: RSDP @ 0xFE020/0x14 (v0 INTEL )
--:--:-- ACPI: RSDT @ 0x7F6FD038/0x34 (v1 INTEL  D945GLF2 0x7A      0x1000013)
--:--:-- ACPI: FACP @ 0x7F6FC000/0x74 (v1 INTEL  D945GLF2 0x7A MSFT 0x1000013)
--:--:-- ACPI: DSDT @ 0x7F6F7000/0x45EC (v1 INTEL  D945GLF2 0x7A MSFT 0x1000013)
--:--:-- ACPI: FACS @ 0x7F6A3000/0x40
--:--:-- ACPI: APIC @ 0x7F6F6000/0x78 (v1 INTEL  D945GLF2 0x7A MSFT 0x1000013)
--:--:-- ACPI: WDDT @ 0x7F6F5000/0x40 (v1 INTEL  D945GLF2 0x7A MSFT 0x1000013)
--:--:-- ACPI: MCFG @ 0x7F6F4000/0x3C (v1 INTEL  D945GLF2 0x7A MSFT 0x1000013)
--:--:-- AcpiOsTableOverride Ex:FFE65000 New:FFE2FFA4 SIG:[DSDT]
--:--:-- Table [DSDT]
--:--:-- Table [FACS]
--:--:-- Table [FACP]
--:--:-- Table [APIC]
--:--:-- Local APIC address: FEE00000h
--:--:-- System also has 8259
--:--:-- APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable
--:--:-- APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable
--:--:-- APIC_PROCESSOR: ProcID 3h LocalApicID 82h - not usable
--:--:-- APIC_PROCESSOR: ProcID 4h LocalApicID 83h - not usable
--:--:-- APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
--:--:-- APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active
: Bus spec Trigger by: Bus spec
--:--:-- APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active
: High 0 Trigger by: Level
--:--:-- APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: Bus spec Trigger by:
 Bus spec
--:--:-- APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: Bus spec Trigger by:
 Bus spec
--:--:-- Table [WDDT]
--:--:-- Table [MCFG]
--:--:-- Size of FACDT 244
--:--:-- Type of computer - Unspecified
--:--:-- System vector the SCI interrupt is wired to in 8259 mode. 9
--:--:-- System port address of the SMI Command Port 0xB2
--:--:-- The value to write to SMI_CMD to disable SMI   0xA0
--:--:-- The value to write to SMI_CMD to re-enable SMI 0xA1
--:--:-- The value to write to SMI_CMD to enter the S4BIOS state 0x0
--:--:-- System port address of the PM1a Event Register Block 400
--:--:-- System port address of the PM1b Event Register Block 0
--:--:-- Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
--:--:-- System port address of the PM1a Control Register Block 404
--:--:-- System port address of the PM1b Control Register Block 0
--:--:-- Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
--:--:-- System port address of the PM2 Control Register Block 420
--:--:-- Number of bytes decoded by PM2_CNT_BLK 1
--:--:-- System port address of the Power Management Timer Control Register Bloc
k 408
--:--:-- Number of bytes decoded by PM_TMR_BLK (=4) 4
--:--:-- System port address of General-Purpose Event 0 Register Block 428
--:--:-- System port address of General-Purpose Event 1 Register Block 0
--:--:-- Number of bytes decoded by GPE0_BLK 0x8
--:--:-- Number of bytes decoded by GPE1_BLK 0x0
--:--:-- Offset within the ACPI general-purpose event model where GPE1 based eve
nts start 0
--:--:-- The system does not support a C2 state. 65
--:--:-- The system does not support a C3 state 3E9
--:--:-- The zero-based index of where the processor's duty cycle setting is wit
hin the processor's P_CNT register 1
--:--:-- The RTC CMOS RAM index to the day-of-month alarm value 13
--:--:-- IA-PC Boot Architecture Flags 0x0
--:--:-- Fixed feature flags 4A5
--:--:-- The reset register:
--:--:-- Type of address space - System Memory Address 0x0 Width 0 Offset 0 Acce
ss size 0
--:--:-- The value to write to the RESET_REG port to reset the system 0
--:--:-- ***** Throttl Width 0 Offset 1
--:--:-- evxfevnt-184 [4] Enable: Transition to ACPI mode successful
--:--:-- evgpeblk-1120 [6] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x
9
--:--:-- AcpiOsInstallIntterrupHandler IRQ9 handler F9AD23CD
--:--:-- AcpiOsDerivePCIID([PCI0] ,[PRR0],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 D
ev:31 Fun:0
--:--:-- AcpiOsDerivePCIID([PCI0] ,[PRR1],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 D
ev:31 Fun:0
--:--:-- AcpiOsDerivePCIID([PCI0] ,[ELR0],) Bus:0 Dev:0 Fun:0 - AcpiOsDerivePci 
- Dev: [IELK] Evaluate bad status=5
--:--:-- Derive: Bus:0 Dev:31 Fun:0
--:--:-- ** Scan EC Status = 0 Find 0 EC
--:--:-- evgpeblk-1223 [5] EvInitializeGpeBlock: Found 8 Wake, Enabled 3 Runtime
 GPEs in this block
--:--:-- ** AcpiInitializeObjects mask:0 Status = 0
--:--:-- Processor [CPU0]
--:--:-- Processor [CPU1]
--:--:-- Processor [CPU2]
--:--:-- Processor [CPU3]
--:--:-- 
Init ACPI rc=0
--:--:-- IO APIC N0 Phys:0xFEC00000 Lin:0xFFE47000 InitID:0x0 ArbID:0x0 Ver:32 L
ines:23
--:--:-- WakeupVector Lin: FFE46000 Phys: 6F000 IPIStack:FFE44000 s_cpu:0
--:--:-- GetWakeupVector Status = 0
--:--:-- PIC Mask:FFFFDFFB
--:--:-- PSD_GET_NUM_OF_PROCS - has 2 CPU
--:--:-- ProcInit CPU0
--:--:-- LApic ID:0x0: ver 0x50014
--:--:-- Max LVT=6
--:--:-- Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
--:--:-- Status Evaluate Processor 0x0 AE_OK
--:--:-- Usable:2 Counter:0 
--:--:--  CPU id to N:0
--:--:--  ProcId:     0x1
--:--:--  P_BLK:      0x410
--:--:--  P_BLK len:  0x6
--:--:-- CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
--:--:-- CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
--:--:-- End init CPU0 rc:0
--:--:-- StartProcessor: CPU1 id 2
--:--:-- StartProcessor: Warm Vector:18000018, BootCode.Lin:0xFFE46000, BootCode
.Phys:0x6F000
--:--:-- StartProcessor 1 id:2 LAPICid:1
--:--:-- Wait INI App Proc
--:--:-- Send SIPI1
--:--:-- StartProcessor success SIPI1
--:--:-- ProcInit CPU1
--:--:-- LApic ID:0x1000000: ver 0x50014
--:--:-- Max LVT=6
--:--:-- End Startup code
--:--:-- Set HLT duration as IOdelay:0x187
--:--:-- Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
--:--:-- Status Evaluate Processor 0x0 AE_OK
--:--:-- Usable:2 Counter:1 
--:--:--  CPU id to N:1
--:--:--  ProcId:     0x2
--:--:--  P_BLK:      0x410
--:--:--  P_BLK len:  0x6
--:--:-- CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
--:--:-- CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND
--:--:-- End init CPU1 rc:0
--:--:-- UNMASK IRQ8 mask:FFFFDEFB
Symbols linked (screen01)
21:34:49 UNMASK IRQ9 mask:FFFFDCFB
21:34:49 ** Create resource, max = 31 **
21:34:49 OemHlpXHandler: ACPI_START_EVENTS 3
21:34:49 ** AcpiInstall Power Device Status = 0
21:34:49 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204
]
21:34:49 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
21:34:49 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
21:34:49 ** AcpiInstall PMTimer Device Status = 0
21:34:49 ** Total use:63200 unuse:5064 count:1282 **
21:34:49 Event [_L00] Install GPE0x0
21:34:49 Event [_L03] Install GPE0x3
21:34:49 Event [_L04] Install GPE0x4
21:34:49 Event [_L05] Install GPE0x5
21:34:49 Event [_L09] Install GPE0x9
21:34:49 Event [_L0A] Install GPE0xA
21:34:49 Event [_L0B] Install GPE0xB
21:34:49 Event [_L0C] Install GPE0xC
21:34:49 Event [_L0D] Install GPE0xD
21:34:49 Event [_L0E] Install GPE0xE
21:34:49 Event [_L1D] Install GPE0x1D
21:34:49 EndScan GPE Status 0
21:34:49 OemHlpXHandler: ACPI_START_EVENTS 4
21:34:49 OemHlpXHandler: CallACPI16: 4900907, CallACPI32: F9AA5D8E, ExportTable3
2: F9C002B8
