AllocIRQMem at 0xFFE8A000 (24576 bytes)

PSD_install options:" /PIC /NOD" @#netlabs dot org:3.5#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Nov 25 2007 02:10:40
MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
New Stack = FFD00000 Size:0x8000
AcpiOsInitialize ALLOC size 65536 at 0xF9C40000
AcpiOsInitialize MapMem size 4096 at 0xFFE89000
AcpiOsCreateLock 8
AcpiOsCreateLock 8
AcpiOsPredefinedOverride: "_REV"
AcpiOsPredefinedOverride: "_OS_"
AcpiOsPredefinedOverride: override to eComStation
AcpiOsPredefinedOverride: "_GL_"
AcpiOsCreateSemaphore: O.K. Handle=0xF9C403F8 M:1 I:0
AcpiOsPredefinedOverride: "_OSI"
AcpiOsPredefinedOverride: override to eCS
*** AcpiInitializeSubsystem Status = 0 ***
ACPI: RSDP @ 0xFE020/0x14 (v0 INTEL )
ACPI: RSDT @ 0x7FEFD038/0x38 (v1 INTEL  D975XBX2 0xAED      0x1000013)
ACPI: FACP @ 0x7FEFC000/0x74 (v1 INTEL  D975XBX2 0xAED MSFT 0x1000013)
ACPI: DSDT @ 0x7FEF8000/0x3F11 (v1 INTEL  D975XBX2 0xAED MSFT 0x1000013)
ACPI: FACS @ 0x7FEAC000/0x40
ACPI: APIC @ 0x7FEF7000/0x78 (v1 INTEL  D975XBX2 0xAED MSFT 0x1000013)
ACPI: WDDT @ 0x7FEF6000/0x40 (v1 INTEL  D975XBX2 0xAED MSFT 0x1000013)
ACPI: MCFG @ 0x7FEF5000/0x3C (v1 INTEL  D975XBX2 0xAED MSFT 0x1000013)
ACPI: HPET @ 0x7FEF4000/0x38 (v1 INTEL  D975XBX2 0xAED MSFT 0x1000013)
*** AcpiInitializeTables Status = 0 ***
AcpiOsTableOverride Ex:FFE85000 New:FFCFFFC4 SIG:[DSDT]
*** AcpiLoadTables Status = 0 ***
Table [DSDT]
Table [FACS]
Table [FACP]
Table [APIC]
Local APIC address: FEE00000h
System also has 8259
APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable
APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable
APIC_PROCESSOR: ProcID 3h LocalApicID 82h - not usable
APIC_PROCESSOR: ProcID 4h LocalApicID 83h - not usable
APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: Bus spec Trigger by: Bus spec
APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: Bus spec Trigger by: Bus spec
Table [WDDT]
Table [MCFG]
Table [HPET]
Size of FACDT 244
Type of computer - Unspecified
System vector the SCI interrupt is wired to in 8259 mode. 9
System port address of the SMI Command Port 0xB2
The value to write to SMI_CMD to disable SMI   0xA0
The value to write to SMI_CMD to re-enable SMI 0xA1
The value to write to SMI_CMD to enter the S4BIOS state 0x0
The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0xE5
System port address of the PM1a Event Register Block 400
System port address of the PM1b Event Register Block 0
Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
System port address of the PM1a Control Register Block 404
System port address of the PM1b Control Register Block 0
Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
System port address of the PM2 Control Register Block 420
Number of bytes decoded by PM2_CNT_BLK 1
System port address of the Power Management Timer Control Register Block 408
Number of bytes decoded by PM_TMR_BLK (=4) 4
System port address of General-Purpose Event 0 Register Block 428
System port address of General-Purpose Event 1 Register Block 0
Number of bytes decoded by GPE0_BLK 0x8
Number of bytes decoded by GPE1_BLK 0x0
Offset within the ACPI general-purpose event model where GPE1 based events start 0
GPE enable register: 0: 0: 0: 0
GPE status register: 0: 0: 83: 9
The system does not support a C2 state. 65
The system does not support a C3 state 3E9
The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
The RTC CMOS RAM index to the day-of-month alarm value 13
IA-PC Boot Architecture Flags 0x0
Fixed feature flags A5
The reset register:
Type of address space - System Memory
Register Bit Width  0
Register Bit Offset 0
Access size 0
Address 0
The value to write to the RESET_REG port to reset the system 0
***** Throttl Width 0 Offset 1
AcpiOsInstallIntterrupHandler IRQ9 handler FE630F09
************ AcpiEnableSubsystem Status = 0
AcpiOsDerivePCIID([PCI0] ,[PRR0],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
AcpiOsDerivePCIID([PCI0] ,[PRR1],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
AcpiOsDerivePCIID([PCI0] ,[ELR0],) Bus:0 Dev:0 Fun:0 - AcpiOsDerivePci - Dev: [IELK] Evaluate bad status=5
Derive: Bus:0 Dev:31 Fun:0
************ Scan EC Status = 0
************ AcpiInitializeObjects mask:0 Status = 0
Processor [CPU0]
Processor [CPU1]
Processor [CPU2]
Processor [CPU3]
Status 0x0 0
************ AcpiInstallNotifyHandler System Status = 0
************ AcpiInstallNotifyHandler Device Status = 0
PSDFree: at 0xF9C50000 success!
Found bridge "PCI0" BBN is absent status:5
Finding:0 bridges
0:0.0  Class:600  Hdr:0   Bridge H->0
0:1.0  Class:604  Hdr:1   Bridge 0->1
0:28.0  Class:604  Hdr:81   Bridge 0->2
0:28.5  Class:604  Hdr:81   Bridge 0->3
0:29.0  Class:C03  Hdr:80
0:29.1  Class:C03  Hdr:0
0:29.2  Class:C03  Hdr:0
0:29.3  Class:C03  Hdr:0
0:29.7  Class:C03  Hdr:0
0:30.0  Class:604  Hdr:1   Bridge 0->4
0:31.0  Class:601  Hdr:80
0:31.1  Class:101  Hdr:0
0:31.3  Class:C05  Hdr:0
1:0.0  Class:300  Hdr:80
1:0.1  Class:380  Hdr:0
3:0.0  Class:200  Hdr:0
4:0.0  Class:104  Hdr:0
4:2.0  Class:100  Hdr:0
PCI Bus scan: 5 PCI buses found.
Scan ACPI tree for PCI functions
AcpiOsDerivePCIID([PCI0] ,[TMEM],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
AcpiOsDerivePCIID([PCI0] ,[PAMX],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
0:0.0  'PCI0' (F9C41A08)
0:30.0  'P32_' (F9C42058)
0:31.0  'LPC_' (F9C42190)
0:28.0  'PEX0' (F9C45B70)
0:28.1  'PEX1' (F9C461D8)
0:28.2  'PEX2' (F9C46730)
0:28.3  'PEX3' (F9C46C88)
0:28.4  'PEX4' (F9C471E0)
0:28.5  'PEX5' (F9C47738)
0:29.0  'UHC1' (F9C47DE0)
0:29.1  'UHC2' (F9C47FD8)
0:29.2  'UHC3' (F9C481D0)
0:29.3  'UHC4' (F9C483C8)
0:29.7  'EHCI' (F9C485C0)
0:30.3  'AC9M' (F9C487B8)
0:27.0  'AZAL' (F9C489B0)
0:31.1  'IDEC' (F9C48BA8)
0:31.2  'IDES' (F9C49538)
Bridges found:
0:0.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (F9C41A08) _PRT
0:1.0  class:604  type: 1  Bus 0->1
0:28.0  class:604  type: 1  Bus 0->2  ACPI: 'PEX0' (F9C45B70) _PRT
0:28.5  class:604  type: 1  Bus 0->3  ACPI: 'PEX5' (F9C47738) _PRT
0:30.0  class:604  type: 1  Bus 0->4  ACPI: 'P32_' (F9C42058) _PRT
IRQLinks found:
0: 'LNKA' (F9C42418)  P[ 3, 4, 5, 7, 9, 10,*11, 12] <- 1:0.0 0:29.3
                       A[]
1: 'LNKB' (F9C426F0)  P[ 3, 4, 5, 7,*9, 10, 11, 12] <- 3:0.0
                       A[]
2: 'LNKC' (F9C42910)  P[ 3, 4, 5, 7,*9, 10, 11, 12] <- 4:2.0 0:31.1 0:29.2
                       A[]
3: 'LNKD' (F9C42B30)  P[ 3, 4, 5, 7, 9, 10,*11, 12] <- 0:31.3 0:29.1
                       A[]
4: 'LNKF' (F9C42F70)  P[ 3, 4, 5, 7, 9,*10, 11, 12] <- 4:0.0
                       A[]
5: 'LNKH' (F9C433B0)  P[ 3, 4, 5, 7, 9,*10, 11, 12] <- 0:29.7 0:29.0
                       A[]
6: 'LNKG' (F9C43190)  P[]
                       A[]
7: 'LNKE' (F9C42D50)  P[]
                       A[]
PCI devices found:
0:0.0  8086:277C  'PCI0'
0:1.0  8086:277D        
0:28.0  8086:27D0  'PEX0'
0:28.5  8086:27E2  'PEX5'
0:29.0  8086:27C8  'UHC1'  IRQs: PCI:10 PIC:'LNKH':10 APIC:23
0:29.1  8086:27C9  'UHC2'  IRQs: PCI:11 PIC:'LNKD':11 APIC:19
0:29.2  8086:27CA  'UHC3'  IRQs: PCI:9 PIC:'LNKC':9 APIC:18
0:29.3  8086:27CB  'UHC4'  IRQs: PCI:11 PIC:'LNKA':11 APIC:16
0:29.7  8086:27CC  'EHCI'  IRQs: PCI:10 PIC:'LNKH':10 APIC:23
0:30.0  8086:244E  'P32_'
0:31.0  8086:27B0  'LPC_'
0:31.1  8086:27DF  'IDEC'  IRQs: PCI:9 PIC:'LNKC':9 APIC:18
0:31.3  8086:27DA          IRQs: PCI:11 PIC:'LNKD':11 APIC:19
1:0.0  1002:5B60          IRQs: PCI:11 PIC:'LNKA':11 APIC:16 MSI
1:0.1  1002:5B70        
3:0.0  8086:109A          IRQs: PCI:9 PIC:'LNKB':9 APIC:17 MSI
4:0.0  101E:1960          IRQs: PCI:10 PIC:'LNKF':10 APIC:21
4:2.0  9004:5078          IRQs: PCI:9 PIC:'LNKC':9 APIC:18
Bus detected - 4
************ AcpiInstall Power Device Status = 0
ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320]
ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320]
************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
************ AcpiInstall PMTimer Device Status = 0
** Total use:80048 unuse:4704 count:1386 **
Get GpeHdl Status = 0 - AE_OK
Event [_L03]
Install GPE0x3  Status 0x0
Event [_L04]
Install GPE0x4  Status 0x0
Event [_L05]
Install GPE0x5  Status 0x0
Event [_L09]
Install GPE0x9  Status 0x0
Event [_L0A]
Install GPE0xA  Status 0x0
Event [_L0B]
Install GPE0xB  Status 0x0
Event [_L0C]
Install GPE0xC  Status 0x0
Event [_L0D]
Install GPE0xD  Status 0x0
Event [_L0E]
Install GPE0xE  Status 0x0
Event [_L1D]
Install GPE0x1D  Status 0x0
EndScan GPE Status 0
===== Info ========
Int Level 9
In Xrupt F9C4DAA8 in arg F9C4DAA8
      Node
Name [_GPE]
Flags: 0
Reg count 4
GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0 Status:428 Enable:42C EnableWake:38 EnableRun:0 BaseGPENumber:0
GPE0x9 Flag:0x4 Status - Set 0x0 Enable 0x0
GPE0xA Flag:0x4 Status - Set 0x0 Enable 0x0
GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
GPE1 Status:429 Enable:42D EnableWake:78 EnableRun:6 BaseGPENumber:8
GPE2 Status:42A Enable:42E EnableWake:0 EnableRun:0 BaseGPENumber:10
GPE0x1D Flag:0x2 Status - Set 0x0 Enable 0x0
GPE3 Status:42B Enable:42F EnableWake:20 EnableRun:0 BaseGPENumber:18
=========== Status 0x0 0
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [UHC1] Value:0
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [UHC2] Value:0
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [UHC3] Value:0
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [UHC4] Value:0
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [EHCI] Value:0
************ Leave Sleep Status = 0x5 - AE_NOT_FOUND
FindPCIDevice
 Need: B:0 D:1F F:1
Finding APIC18 PIC9 Dev: [IDEC]
