wiki:KnownProblems

Version 15 (modified by dazarewicz, 8 years ago) (diff)

--

Known Problems

These are the known problems that may affect many users. Problems which only affect 1 or 2 unique systems are not listed here. Since these are already known problems, you do not need to open a ticket or report any of the problems listed on this page.

Suspend / Resume

Suspend / Resume only works on a very small number of systems. If Suspend / Resume works for you, consider yourself among the few lucky ones. If it does not work for you, please wait for more progress to be made and try a later version. Please do not report problems with Suspend / Resume at this time.

Power Off

There is a known problem with almost all utilities that power off your system, including the xworkplace eComStation extended shutdown. This is not an ACPI.PSD problem.

The problem occurs when these utilities shut down the file systems before the power off routine has been paged into memory. When the utility calls the routine to power off the system, the kernel can't page it into memory because the file systems have been stopped. This is not a defect in ACPI.PSD or related software and cannot be fixed in the any of the ACPI software because the ACPI software does not get control at the appropriate time. It must be fixed in the power off utility.

Because of the nature of this defect, power off utilities with the defect may have randomly worked in the past because the power off routine may or may not have been in memory for some other reason. If things move around in memory, or some other program causes the routine to get paged in, the power off may have worked. The only way to reliably fix the defect is to fix the power off utility.

You can test the power off functionality of ACPI by itself by opening a command window and typing the following command:

acpistat poweroff

This command properly makes sure the power off routine is in memory before stopping the file systems. Make sure you are using the latest version of acpistat.exe.

If acpistat poweroff successfully powers off your system, then there is nothing wrong with any of the ACPI software. Do not report this as a problem with ACPI. Instead report the problem to the appropriate place for your shutdown utility (xworkplace, for example).

Systems with ACPI from Award

NOTE: This problem is fixed in version 3.20.01 or later.

There is a known problem with the ACPI provided by Award. These systems typically won't boot. The boot hangs with the boot logo on the screen.

You can determine if your BIOS has this ACPI in it by opening a command window and typing the following command:

iasl -g

This command will work whether or not ACPI.PSD is installed. The command will output a bunch of lines to the screen which will look something like this:

ACPI: RSDP F8CA0 14 (v0 VIAK8M)
ACPI: RSDT 7FFF3040 2C (v1 VIAK8M AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 7FFF30C0 74 (v1 VIAK8M AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 7FFF3180 5139 (v1 VIAK8M AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 7FFF0000 40
ACPI: APIC 7FFF8300 5A (v1 VIAK8M AWRDACPI 42302E31 AWRD 0)

If the line which starts with "ACPI: DSDT" has the string "AWRDACPI" in it, then your system has the Award ACPI in it. If your system has the Award ACPI in it, then you do not need to open a ticket. I already know about the problem and I am working on an fix for it.

The iasl -g command also writes a few files to the current directory which are unneeded and you can delete them.

Booting slowness

Because of some recent changes to make the PSD compatible with an even larger number of vendor's ACPI, the boot time may have increased by a few seconds. On some systems, the boot time may have increased significantly (30-40 seconds). The slowness occurs when the Kernel is loading the basedev drivers during boot. The basedev drivers are loaded in between the time the OS/2 IBM copyright message is displayed on the screen and the time the PSD sign on banner is displayed. This is not an ACPI.PSD problem. This is a peculiarity in the way certain BIOS operate (typically BIOS from Award). The OS/2 kernel uses the BIOS to load the basedev drivers, In order for this to work in Mode 2, the PSD must tell the BIOS to switch interrupt modes and reassign certain interrupts each time the Kernel calls the BIOS. Most BIOS do this very quickly. A few take a long time to make the switch.

Since this is a BIOS issue and not an ACPI.PSD issue, it is extremely unlikely that I will be able to do anything about this slowness. However, I will gather more information in the hope that there may be something I can do -- at lease for some of the systems. if you have this slowness issue on your system you can help me gather data by installing the debug version of the PSD, creating a testlog, and attaching it to ticket #536. If the increase in boot time bothers you, your only solution is to run your system with the /VW switch which does not require the interrupt mode switching.

Immediate suspend due to misbehaving SLPB device

NOTE: In version 3.19.16 and later, a workaround was implemented to ignore SLPB events if one occurs within 10 seconds of starting AcpiDaemon.exe. The SLPB events are still generated by the hardware every 2 seconds, but they are simply ignored. If AcpiDaemon logging is enabled, the log file could grow very large logging these events. An actual fix is still being investigated.

Some systems enter suspend immediately after AcpiDaemon is started. This is due to a misbehaving SLPB device which generates repeating suspend requests. If you have this problem, don't run the AcpiDaemon until a version with a fix or workaround is released.

SCSI drivers

While this is not an ACPI.PSD problem, I am listing it here because the PSD can reconfigure the system in a way that the drivers don't like.

It appears that most SCSI drivers have one or both of 2 problems.

  1. Some SCSI drivers cannot handle interrupt numbers greater than 15.
  2. Some SCSI drivers cannot handle the interrupt being changed from what the BIOS has set it to, regardless of whether or not it is greater than 15.

Both of these problems can be handled by using the /VW switch.