AllocIRQMem at 0xFFEA4000 (20480 bytes) PSD_install options:" " @#netlabs dot org:3.1#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Aug 16 2007 13:12:46 MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0 SS Selector fault AcpiOsInitialize ALLOC size 65536 at 0xF9B03000 AcpiOsInitialize MapMem size 4096 at 0xFFEA3000 AcpiOsCreateLock F9B031F0 AcpiOsCreateLock F9B03208 AcpiOsPredefinedOverride: "_REV" AcpiOsPredefinedOverride: "_OS_" AcpiOsPredefinedOverride: override to eComStation AcpiOsPredefinedOverride: "_GL_" AcpiOsCreateSemaphore: O.K. Handle=0xF9B03428 M:1 I:0 AcpiOsPredefinedOverride: "_OSI" AcpiOsPredefinedOverride: override to eCS *** AcpiInitializeSubsystem Status = 0 *** AcpiOsMapMemory 0x40E size 0x2 AcpiOsMapMemory 0x9F800 size 0x400 AcpiOsMapMemory 0xE0000 size 0x20000 AcpiOsMapMemory 0xF6890 size 0x24 ACPI: RSDP @ 0x1009808/0x14 (v0 PTLTD ) AcpiOsMapMemory 0x2BEF5B3E size 0x24 ACPI: RSDT @ 0x737106750/0x2C (v1 PTLTD RSDT RSDT 0x6040000 LTP 0x0) AcpiOsMapMemory 0x2BEF5B3E size 0x2C AcpiOsMapMemory 0x2BEFAE74 size 0x24 ACPI: FACP @ 0x737128052/0x74 (v1 KN400 PTLTW PTLTW 0x6040000 PTL_@B 0xF4240) AcpiOsMapMemory 0x2BEFAE74 size 0x74 AcpiOsMapMemory 0x2BEF5B6A size 0x24 ACPI: DSDT @ 0x737106794/0x530A (v1 VIA PTL_ACPI 0x6040000 MSFT 0x100000E) AcpiOsMapMemory 0x2BEFBFC0 size 0x24 ACPI: FACS @ 0x737132480/0x40 AcpiOsMapMemory 0x2BEFAEE8 size 0x24 ACPI: SSDT @ 0x737128168/0x118 (v1 PTLTD POWERNOW POWERNOW 0x6040000 LTP 0x1) *** AcpiInitializeTables Status = 0 *** AcpiOsMapMemory 0x2BEF5B6A size 0x530A AcpiOsTableOverride Ex:FFE8AB6A New:FFDEADA4 SIG:[DSDT] AcpiOsAllocate: new pool F9AF3000 AcpiOsMapMemory 0x2BEFAEE8 size 0x118 *** AcpiLoadTables Status = 0 *** Table [DSDT] Table [FACS] Table [FACP] Table [SSDT] Size of FACDT 244 Type of computer - Unspecified System vector the SCI interrupt is wired to in 8259 mode. 10 System port address of the SMI Command Port 0x402F The value to write to SMI_CMD to disable SMI 0xF0 The value to write to SMI_CMD to re-enable SMI 0xF1 The value to write to SMI_CMD to enter the S4BIOS state 0x0 System port address of the PM1a Event Register Block 4000 System port address of the PM1b Event Register Block 0 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 System port address of the PM1a Control Register Block 4004 System port address of the PM1b Control Register Block 0 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 System port address of the PM2 Control Register Block 0 System port address of the Power Management Timer Control Register Block 4008 Number of bytes decoded by PM_TMR_BLK (=4) 4 System port address of General-Purpose Event 0 Register Block 4020 System port address of General-Purpose Event 1 Register Block 0 Number of bytes decoded by GPE0_BLK 0x4 Number of bytes decoded by GPE1_BLK 0x0 Offset within the ACPI general-purpose event model where GPE1 based events start 0 GPE enable register: 0: 0 GPE status register: 2: 0 The worst-case hardware latency to enter and exit a C2 state 90 us The worst-case hardware latency to enter and exit a C3 state 900 us The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 0 The RTC CMOS RAM index to the day-of-month alarm value 125 The RTC CMOS RAM index to the month of year alarm value 126 The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50 IA-PC Boot Architecture Flags 0x0 Fixed feature flags 4A5 The reset register: Type of address space - System Memory Register Bit Width 0 Register Bit Offset 0 Access size 0 Address 0 The value to write to the RESET_REG port to reset the system 0 ***** Throttl Width 0 Offset 0 AcpiOsInstallIntterrupHandler IRQA handler F9B90649 AcpiOsMapMemory 0x2BEFBFC0 size 0x40 ************ AcpiEnableSubsystem Status = 0 AcpiOsDerivePCIID([PCI0] ,[IRQR],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0 Device [EC0_] Set DATA to IO:[1 0x62 - 0x62 Al:1 Len:1] Set Control to IO:[1 0x66 - 0x66 Al:1 Len:1] Set Control to END_TAG Checksum:0 GPE 1 EC Find 1 EC ************ Scan EC Status = 1 ************ AcpiInstallAddressSpaceHandler N0 EC Status = 0 count 1 ECadr:F9B6B38C - AE_OK AcpiOsMapMemory 0x2BEFBF4C size 0x1 AcpiOsMapMemory 0x2BEFBEBC size 0x90 ************ AcpiInitializeObjects Status = 0 Processor [CPU0] Status 0x0 0 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND Status Evaluate Processor 0x0 AE_OK Usable:1 Counter:0 CPU id to N:0 ProcId: 0x1 P_BLK: 0x4010 P_BLK len: 0x6 CPU0 Status Evaluate _PCT 0x0 AE_OK Perf control: 0x0 Perf status: 0x0 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND ************ AcpiInstallNotifyHandler System Status = 0 ************ AcpiInstallNotifyHandler Device Status = 0 0:0.0 Class:600 Hdr:0 Bridge H->0 0:1.0 Class:604 Hdr:1 Bridge 0->1 0:7.0 Class:607 Hdr:2 Bridge 0->00:8.0 Class:C00 Hdr:0 0:16.0 Class:C03 Hdr:80 0:16.1 Class:C03 Hdr:80 0:16.2 Class:C03 Hdr:80 0:16.3 Class:C03 Hdr:0 0:17.0 Class:601 Hdr:80 0:17.1 Class:101 Hdr:0 0:17.5 Class:401 Hdr:0 0:17.6 Class:780 Hdr:0 0:18.0 Class:200 Hdr:0 1:0.0 Class:300 Hdr:0 PCI Bus scan: 2 PCI buses found. Scan ACPI tree for PCI functions AcpiEcSetup handle F9B080A0 Function 0 Count 1 ** EmmQueueBeg ** AcpiWaitOBF timeout KEE 42 rc=640 GPE read EC data 80 AcpiOsAcquireMutex Wait H:F9B030F0 T:1 Own:FFFF Cnt:1 P:0 AcpiOsAcquireMutex Timeout H:F9B030F0 T:1 Own:FFFF Cnt:1 P:0 ACPI Exception (utmutex-376): AE_T, Thread 1 could not acquire Mutex [0] [20070320] ACPI Error (exutils-180): Could not acquire AML Interpreter mutex [20070320] GPE EC execute status 0 AcpiWaitIBF timeout KEE 40 rc=640 Interrupt NOT Handled!!!! AcpiWaitOBF timeout KEE 34 rc=640 ** EmmQueueBeg ** AcpiWaitOBF timeout KEE 42 rc=640 GPE read EC data 80 GPE EC execute status 0 AcpiWaitIBF timeout KEE 40 rc=640 Interrupt NOT Handled!!!! AcpiWaitIBF timeout KEE 32 rc=640 Interrupt NOT Handled!!!! AcpiOsReleaseMutex NULL!!! F9B030F0 P0 Cnt:0 AcpiOsDerivePCIID([PCI0] ,[NB00],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0 0:0.0 'PCI0'' (F9B05A28) 0:17.0 'ISA_#' (F9B06380) 0:1.0 'AGP_#' (F9B03D90) 1:0.0 'VGA_#' (F9B0D688) 0:17.1 'IDE_#' (F9B0DEF8) 0:16.0 'USB1#' (F9B0E8F0) 0:16.1 'USB2#' (F9B0EA28) 0:16.2 'USB3#' (F9B0EB60) 0:16.3 'USB4#' (F9B0EC98) 0:17.5 'Z007#' (F9B0EDD0) 0:17.6 'Z002#' (F9B0F050) 0:18.0 'LAN_#' (F9B0F2F8) 0:7.0 'CBUS#' (F9B0F370) 0:8.0 'IEEE#' (F9B0F3C0) 0:9.0 'MINI#' (F9B0F410) Bridges found: 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9B05A28) _PRT 0:1.0 class:604 type: 1 Bus 0->1 ACPI: 'AGP_' (F9B03D90) IRQLinks found: 0: 'LNKA' (F9B06DF8) P[*4] <- 1:0.0 0:18.0 0:17.1 0:16.0 A[] 1: 'LNKB ' (F9B070D0) P[*5] <- 0:16.1 0:8.0 0:7.0 A[] 2: 'LNKC' (F9B072F0) P[*9] <- 0:17.6 0:17.5 0:16.2 A[] 3: 'LNKD' (F9B07510) P[*11] <- 0:16.3 A[] PCI devices found: 0:0.0 1106:3205 'PCI0' 0:1.0 1106:B168 'AGP_' 0:7.0 104C:AC50 'CBUS' IRQs: PCI:0 PIC:'LNKB':5 APIC:0 0:8.0 104C:8026 'IEEE' IRQs: PCI:5 PIC:'LNKB':5 APIC:0 0:16.0 1106:3038 'USB1' IRQs: PCI:0 PIC:'LNKA':4 APIC:0 0:16.1 1106:3038 'USB2' IRQs: PCI:0 PIC:'LNKB':5 APIC:0 0:16.2 1106:3038 'USB3' IRQs: PCI:0 PIC:'LNKC':9 APIC:0 0:16.3 1106:3104 'USB4' IRQs: PCI:0 PIC:'LNKD':11 APIC:0 0:17.0 1106:3177 'ISA_' 0:17.1 1106:571 'IDE_' IRQs: PCI:0 PIC:'LNKA':4 APIC:0 0:17.5 1106:3059 'Z007' IRQs: PCI:9 PIC:'LNKC':9 APIC:0 0:17.6 1106:3068 'Z002' IRQs: PCI:9 PIC:'LNKC':9 APIC:0 0:18.0 1106:3065 'LAN_' IRQs: PCI:4 PIC:'LNKA':4 APIC:0 1:0.0 1106:7205 'VGA_' IRQs: PCI:4 PIC:'LNKA':4 APIC:0 ************ AcpiInstall Power Device Status = 0 ************ AcpiInstall Sleep Device Status = 0 - AE_OK ************ AcpiInstall PMTimer Device Status = 0 Install GPE Status 0 GpeSetType Status = 0 - AE_OK EC[0] GPE1 GpeEnable Status = 0 - AE_OK ** Total use:117040 unuse:1168 count:1951 ** Get GpeHdl Status = 0 - AE_OK Event [_L03] Install GPE 3 Status 0 Set type GPE 3 Status 0 Event [_L05] Install GPE 5 Status 0 Set type GPE 5 Status 0 Event [_L08] Install GPE 8 Status 0 Set type GPE 8 Status 0 Event [_L0B] Install GPE B Status 0 Set type GPE B Status 0 Event [_L0E] Install GPE E Status 0 Set type GPE E Status 0 EndScan GPE Status 0 ===== Info ======== Int Level A In Xrupt F9AF4948 in arg F9AF4948 Node Name [_GPE] Flags: 0 Reg count 2 GPE0 Status:4020 Enable:4022 EnableWake:0 EnableRun:2A BaseGPENumber:0 GPE1 Status:4021 Enable:4023 EnableWake:0 EnableRun:49 BaseGPENumber:8 =========== Status 0x0 0 ************ Leave Sleep Status = 0x0 - AE_OK FindPCIDevice Need: B:0 D:11 F:1 Finding APIC0 PIC4 Dev: [IDE_] Gradd: PSD find success. PSD Ftable:F9B601B8