06 Dec 16:19:37 acpica$ log is reading AllocIRQMem at 0xFFE88000 (24576 bytes) PSD_install options:" /SMP /APIC /Q" @#netlabs dot org:3.5#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Nov 25 2007 01:57:22 MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 New Stack = FFD00000 Size:0x8000 PSD_INIT ESP=0xFFCFFFE0 AcpiOsInitialize ALLOC size 65536 at 0xF9AB0000 AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 AcpiOsCreateLock 8 AcpiOsCreateLock 0 AcpiOsPredefinedOverride: "_REV" AcpiOsPredefinedOverride: "_OS_" AcpiOsPredefinedOverride: override to eComStation AcpiOsPredefinedOverride: "_GL_" AcpiOsCreateSemaphore: O.K. Handle=0xF9AB03F8 M:1 I:0 AcpiOsPredefinedOverride: "_OSI" AcpiOsPredefinedOverride: override to eCS *** AcpiInitializeSubsystem Status = 0 *** ACPI: RSDP @ 0xF8590/0x14 (v0 PTLTD ) ACPI: RSDT @ 0x1FEF6B1F/0x30 (v1 Arima 161Fh 0x6040000 LTP 0x0) ACPI: FACP @ 0x1FEFAE66/0x74 (v1 Arima 161Fh 0x6040000 PTL_ 0xF4240) ACPI: DSDT @ 0x1FEF6B4F/0x4317 (v1 Arima 161Fh 0x6040000 MSFT 0x100000E) ACPI: FACS @ 0x1FEFBFC0/0x40 ACPI: SSDT @ 0x1FEFAEDA/0xD6 (v1 PTLTD POWERNOW 0x6040000 LTP 0x1) ACPI: APIC @ 0x1FEFAFB0/0x50 (v1 PTLTD 0x6040000 LTP 0x0) *** AcpiInitializeTables Status = 0 *** AcpiOsTableOverride Ex:FFE81B4F New:FFCFFFAC SIG:[DSDT] tbxface-619 [2] TbLoadNamespace: ACPI Tables successfully acquired *** AcpiLoadTables Status = 0 *** Table [DSDT] Table [FACS] Table [FACP] Table [SSDT] Table [APIC] Local APIC address: FEE00000h System also has 8259 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable APIC_IO: IO ApicID 1h addr FEC00000h INTI 0 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: High 0 Trigger by: Edge APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge Size of FACDT 244 Type of computer - Unspecified System vector the SCI interrupt is wired to in 8259 mode. 10 System port address of the SMI Command Port 0x402F The value to write to SMI_CMD to disable SMI 0xF0 The value to write to SMI_CMD to re-enable SMI 0xF1 The value to write to SMI_CMD to enter the S4BIOS state 0x0 System port address of the PM1a Event Register Block 4000 System port address of the PM1b Event Register Block 0 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 System port address of the PM1a Control Register Block F510 System port address of the PM1b Control Register Block 0 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 System port address of the PM2 Control Register Block 0 System port address of the Power Management Timer Control Register Block 4008 Number of bytes decoded by PM_TMR_BLK (=4) 4 System port address of General-Purpose Event 0 Register Block 4020 System port address of General-Purpose Event 1 Register Block 0 Number of bytes decoded by GPE0_BLK 0x4 Number of bytes decoded by GPE1_BLK 0x0 Offset within the ACPI general-purpose event model where GPE1 based events start 0 GPE enable register: 0: 0 GPE status register: 0: 0 The worst-case hardware latency to enter and exit a C2 state 10 us The system does not support a C3 state 7D0 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 0 The RTC CMOS RAM index to the day-of-month alarm value 125 The RTC CMOS RAM index to the month of year alarm value 126 The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50 IA-PC Boot Architecture Flags 0x0 Fixed feature flags A5 The reset register: Type of address space - System Memory Register Bit Width 0 Register Bit Offset 0 Access size 0 Address 0 The value to write to the RESET_REG port to reset the system 0 ***** Throttl Width 0 Offset 0 evxfevnt-176 [2] Enable: Transition to ACPI mode successful evgpeblk-1105 [4] EvCreateGpeBlock: GPE 0 to F [_GPE] 2 regs on int 0xA AcpiOsInstallIntterrupHandler IRQA handler F9AFDC8D evgpeblk-1205 [3] EvInitializeGpeBlock: Found 7 Wake, Enabled 0 Runtime GPEs in this block ************ AcpiEnableSubsystem Status = 0 AcpiOsDerivePCIID([PCI0] ,[IRQR],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0 Device [EC__] Set DATA to IO:[1 0x62 - 0x62 Al:1 Len:1] Set Control to IO:[1 0x66 - 0x66 Al:1 Len:1] Set Control to END_TAG Checksum:0 GPE 1 EC Find 1 EC ************ Scan EC Status = 1 ************ AcpiInstallAddressSpaceHandler N0 EC Status = 0 count 1 ECadr:FA001DD4 - AE_OK Install GPE Status 0 GpeSetType Status = 0 - AE_OK EC[0] GPE1 GpeEnable Status = 0 - AE_OK Completing Region/Field/Buffer/Package initialization:................................................. Initialized 15/16 Regions 0/0 Fields 17/18 Buffers 17/27 Packages (495 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:AcpiOsDerivePCIID([PCI0] ,[CCRD],) Bus:0 Dev:10 Fun:0 - Derive: Bus:0 Dev:10 Fun:0 ACPI Error (exfldio-288): Field [PMEN] Base+Offset+Width A4+0+4 is beyond end of region [CCRD] (length A7) [20070320] ACPI Error (psparse-626): Method parse/execution failed [\_SB_.PCI0.CRD0._INI] (Node F9AB6898), AE_AML_REGION_LIMIT ACPI Exception (nsinit-682): AE_AML_REGION_LIMIT, during \_SB_.PCI0.CRD0._INI._INI execution [20070320] . Executed 1 _INI methods requiring 1 _STA executions (examined 49 objects) ************ AcpiInitializeObjects mask:0 Status = 0 Processor [CPU0] Status 0x0 0 ************ AcpiInstallNotifyHandler System Status = 0 ************ AcpiInstallNotifyHandler Device Status = 0 Init ACPI rc=0 APIC0 phys FEC00000 lin: FFDED000 APIC ID 1000000 (178003) Ver 3 MaxIO entry 0x17 (1000000) Arbitration ID 1 set to (1000000) 1 Id (1000000) 1 Set 24 lines from IRQ0 =========== Status set APIC mode 0x0 AcpiOsDerivePCIID([PCI0] ,[NB00],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0 Current IRQs line 24 IRQ0 override to IRQ2 Vector:50 Line:2 WakeupVector Lin: FFDEC000 WakeupVector Lin: FFDEC000 Phys: 6E000 IPIStack:FFDEB000 s_cpu:FFDE3000 GetWakeupVector Status = 0 PIC Mask:FFFFDFFB PSD_GET_NUM_OF_PROCS - has 1 CPU ProcInit CPU0 LApic ID:0x0: ver 0x40010 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND Status Evaluate Processor 0x0 AE_OK Usable:1 Counter:0 CPU id to N:0 ProcId: 0x0 P_BLK: 0x4010 P_BLK len: 0x6 CPU0 Status Evaluate _PCT 0x0 AE_OK Perf control: 0x0 Perf status: 0x0 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND UNMASK PIC IRQ8 mask 0xFFFFDEFB Real:FFEBB8F4 PSDFree: at 0xF9AC0000 success! OemHlpXHandler: ACPI.CFG opened: Size is 2064 bytes OemHlpXHandler: ACPI.CFG read: 2064 bytes OemHlpXHandler: ACPI.CFG closed: 0, Buffer at FD79C01C CFG: Link [LNKA] IRQ9 CFG: Link [LNKB] IRQ11 CFG: Link [LNKC] IRQ11 CFG: Link [LNKD] IRQ9 Found bridge "PCI0" Addr:0x0 BBN is 0 Dev:0x0 Fun:0x0 AcpiEcSetup handle F9AB6DD8 Function 0 Count 1 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 Finding:1 bridges 0:0.0 Class:600 Hdr:0 Bridge H->0 0:1.0 Class:604 Hdr:1 Bridge 0->1 0:10.0 Class:607 Hdr:2 Bridge 0->129 0:12.0 Class:280 Hdr:0 0:16.0 Class:C03 Hdr:80 0:16.1 Class:C03 Hdr:80 0:16.2 Class:C03 Hdr:80 0:16.3 Class:C03 Hdr:0 0:17.0 Class:601 Hdr:80 0:17.1 Class:101 Hdr:0 0:17.5 Class:401 Hdr:0 0:17.6 Class:780 Hdr:0 0:18.0 Class:200 Hdr:0 0:19.0 Class:C00 Hdr:0 0:24.0 Class:600 Hdr:80 Bridge H->0 0:24.1 Class:600 Hdr:80 Bridge H->0 0:24.2 Class:600 Hdr:80 Bridge H->0 0:24.3 Class:600 Hdr:80 Bridge H->0 1:0.0 Class:300 Hdr:0 PCI Bus scan: 130 PCI buses found. Scan ACPI tree for PCI functions 0:0.0 'PCI0' (F9AB1A38) 0:17.0 'PIB_' (F9AB2638) 0:17.1 'IDE_' (F9AB5308) 0:16.0 'USB1' (F9AB5D80) 0:16.1 'USB2' (F9AB5F18) 0:16.2 'USB3' (F9AB60B0) 0:16.3 'USB4' (F9AB6248) 0:17.5 'Z007' (F9AB62F8) 0:17.6 'Z00A' (F9AB6578) 0:10.0 'CRD0' (F9AB6820) 0:18.0 'NICD' (F9AB6D38) 0:1.0 'AGP_' (F9AB6EA8) 1:0.0 'VGA_' (F9AB6EF8) Bridges found: 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9AB1A38) _PRT 0:1.0 class:604 type: 1 Bus 0->1 ACPI: 'AGP_' (F9AB6EA8) 0:10.0 class:607 type: 2 Bus 0->129 ACPI: 'CRD0' (F9AB6820) IRQLinks found: Apic Set: 9 Apic Set: 9 Apic Set: 9 Apic Set: 9 0: 'LNKA' (F9AB3A20) P[ 3, 4, 5, 7,*9, 12, 14, 15] <- 1:0.0 0:17.6 0:17.5 0:16.0 A[] Apic Set: 11 Apic Set: 11 Apic Set: 11 1: 'LNKB' (F9AB3C40) P[ 3, 4, 5, 7, 10,*11, 12, 14, 15] <- 0:18.0 0:16.1 0:10.0 A[] Apic Set: 11 Apic Set: 11 Apic Set: 11 2: 'LNKC' (F9AB3E60) P[ 3, 4, 5, 7, 11, 12, 14, 15] <- 0:17.1 0:16.2 0:12.0 A[] Apic Set: 9 Apic Set: 9 3: 'LNKD' (F9AB4080) P[ 3, 4, 5, 7,*9, 10, 11, 12, 14, 15] <- 0:19.0 0:16.3 A[] 4: 'ALKA' (F9AB30E8) P[] A[#16, 17, 18, 19, 20, 21, 22, 23] <- 0:17.1 0:16.2 0:12.0 5: 'ALKB' (F9AB33C0) P[] A[#23] <- 0:18.0 0:16.1 0:10.0 6: 'ALKC' (F9AB35E0) P[] A[#22] <- 0:17.6 0:17.5 0:16.0 7: 'ALKD' (F9AB3800) P[] A[#21] <- 0:16.3 PCI devices found: 0:0.0 1106:3188 'PCI0' 0:1.0 1106:B188 'AGP_' 0:10.0 1524:1410 'CRD0' IRQs: PCI:0 PIC:'LNKB':11 APIC:17 Apic Set: 17 0:12.0 14E4:4320 IRQs: PCI:9 PIC:'LNKC': R 9 APIC:18 Apic Set: 18 0:16.0 1106:3038 'USB1' IRQs: PCI:0 PIC:'LNKA':9 APIC:'ALKD':21 Apic Set: 21 0:16.1 1106:3038 'USB2' IRQs: PCI:0 PIC:'LNKB':11 APIC:'ALKD':21 Apic Set: 21 0:16.2 1106:3038 'USB3' IRQs: PCI:0 PIC:'LNKC':0 APIC:'ALKD':21 Apic Set: 21 0:16.3 1106:3104 'USB4' IRQs: PCI:0 PIC:'LNKD':10 APIC:'ALKD':21 Apic Set: 21 0:17.0 1106:3177 'PIB_' 0:17.1 1106:571 'IDE_' IRQs: PCI:0 PIC:'LNKC':0 APIC:'ALKA':16 Apic Set: 16 0:17.5 1106:3059 'Z007' IRQs: PCI:10 PIC:'LNKA':9 APIC:'ALKC':22 Apic Set: 22 0:17.6 1106:3068 'Z00A' IRQs: PCI:10 PIC:'LNKA':9 APIC:'ALKC':22 Apic Set: 22 0:18.0 1106:3065 'NICD' IRQs: PCI:9 PIC:'LNKB':11 APIC:'ALKB':23 Apic Set: 23 0:19.0 1106:3044 IRQs: PCI:10 PIC:'LNKD':10 APIC:19 Apic Set: 19 0:24.0 1022:1100 0:24.1 1022:1101 0:24.2 1022:1102 0:24.3 1022:1103 1:0.0 1002:4E50 'VGA_' IRQs: PCI:9 PIC:'LNKA':9 APIC:16 Apic Set: 16 Max IRQ number in use - 23 Bus detected - 129 UNMASK PIC IRQ10 mask 0xFFFFDAFB Real:FFEBB8F4 ** Create resource, max = 31 ** OemHlpXHandler: ACPI_START_EVENTS 3 ************ AcpiInstall Power Device Status = 0 ************ AcpiInstall Sleep Device Status = 0 - AE_OK ************ AcpiInstall PMTimer Device Status = 0 ** Total use:101632 unuse:2960 count:1859 ** Get GpeHdl Status = 0 - AE_OK Event [GPEF] Event [GUSB] Event [_L03] Install GPE0x3 Status 0x0 Event [_L05] Install GPE0x5 Status 0x0 Event [_L08] Install GPE0x8 Status 0x0 Event [_L0E] Install GPE0xE Status 0x0 Event [_L0D] Install GPE0xD Status 0x0 EndScan GPE Status 0 ===== Info ======== Int Level A In Xrupt F9ABD968 in arg F9ABD968 Node Name [_GPE] Flags: 0 Reg count 2 GPE0x1 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x2 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0 Status:4020 Enable:4022 EnableWake:2C EnableRun:2 BaseGPENumber:0 GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0 GPE1 Status:4021 Enable:4023 EnableWake:71 EnableRun:0 BaseGPENumber:8 =========== Status 0x0 0 ************ Leave Sleep Status = 0x5 - AE_NOT_FOUND OemHlpXHandler: ACPI_START_EVENTS 4 OemHlpXHandler: CallACPI16: 47008DF, CallACPI32: F9AD5182, ExportTable32: FA0001CC UNMASK PIC IRQ1 mask 0xFFFFDAF9 Real:FFEBB8F4 IRQMask SetVirtualWireMode SetVirtualWireMode Apic 0 PIC 0 PCI:480400 PICMask:DAF9 IRQs:24 UNMASK APIC IRQ21 mask 0xFFDFDAF9 APIC MASK IRQ21 UNMASK APIC IRQ21 mask 0xFFDFDAF9 APIC MASK IRQ21 UNMASK APIC IRQ21 mask 0xFFDFDAF9 APIC MASK IRQ21 UNMASK APIC IRQ21 mask 0xFFDFDAF9 APIC MASK IRQ21 APM: PSD find success. PSD Ftable:FA0001D0 Register Notify 1st FFCBE1CE UNMASK PIC IRQ6 mask 0xFFFFDAB9 Real:FFEBB8F4 UNMASK PIC IRQ6 mask 0xFFFFDAB9 Real:FFEBB8F4 FindPCIDevice Need: B:0 D:11 F:1 Finding APIC16 PIC0 Dev: [IDE_] UNMASK PIC IRQ14 mask 0xFFFF9AF9 Real:FFEBB8F4 UNMASK PIC IRQ14 mask 0xFFFF9AF9 Real:FFEBB8F4 UNMASK PIC IRQ14 mask 0xFFFF9AF9 Real:FFEBB8F4 UNMASK PIC IRQ14 mask 0xFFFF9AF9 Real:FFEBB8F4 UNMASK PIC IRQ15 mask 0xFFFF1AF9 Real:FFEBB8F4 UNMASK PIC IRQ15 mask 0xFFFF1AF9 Real:FFEBB8F4 UNMASK PIC IRQ15 mask 0xFFFF1AF9 Real:FFEBB8F4 UNMASK PIC IRQ15 mask 0xFFFF1AF9 Real:FFEBB8F4 UNMASK PIC IRQ14 mask 0xFFFF1AF9 Real:FFEBB8F4 UNMASK PIC IRQ15 mask 0xFFFF1AF9 Real:FFEBB8F4 UNMASK PIC IRQ1 mask 0xFFFF1AF9 Real:FFEBB8F4 UNMASK PIC IRQ12 mask 0xFFFF0AF9 Real:FFEBB8F4 UNMASK APIC IRQ22 mask 0xFFBF0AF9 UNMASK APIC switch ACPI IRQ2 APM: Found AC "AC__" AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [AC__] Value:0 Calling FFCBE1CE APM: ******** Notify: 0 ********* APM: ******** End Notify: 0 ********* AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 APM: Found Smart Battery "BAT0" AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** Device Notify *** Dev: [CPU0] Value:80 CPU0 Status Evaluate _PCT 0x0 AE_OK Perf control: 0x0 Perf status: 0x0 Calling FFCBE1CE APM: ******** Notify: 80 ********* APM: ******** End Notify: 80 ********* AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 AcpiWaitIBF timeout KEE 8 rc=640 AcpiWaitOBF timeout KEE 2 rc=640 UNMASK APIC IRQ21 mask 0xFF9F0AF9 UNMASK APIC IRQ21 mask 0xFF9F0AF9 UNMASK APIC IRQ21 mask 0xFF9F0AF9 UNMASK APIC IRQ21 mask 0xFF9F0AF9 Set LINK to IRQ16 Set LINK to IRQ23 Set LINK to IRQ22 Set LINK to IRQ21 OemHlpXHandler: CMD_INIT_COMPLETE PSD_SET_ADV_INT_MODE Apic 0 PIC 0 Dummy 0 IDT FFDBF370 Vector 50 Dummy 7 IDT FFDBF370 Vector 57 Dummy 8 IDT FFDBF370 Vector 70 Dummy 2C IDT FFDBF370 Vector F3 Dummy 2F IDT FFDBF370 Vector F2 Dummy 2E IDT FFDBF370 Vector 2E UNMASK APIC IRQ0 mask 0xFF9F2AFC UNMASK APIC IRQ23 mask 0xFF1F2AFC UNMASK APIC IRQ18 mask 0xFF1B2AFC ******** Event tread *************** Button KernBlock 4294967295 timeout ******** Notify wait Counter 0 *************** 06 Dec 16:19:37 acpica$ log is reading APM: Setting suspend state:3