OS/2 (C) Copyright IBM Corp. 1987, 2001. All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Internal revision 14.104b_SMP Symbols linked (acpi) --:--:-- KEE Version 0x10000 --:--:-- PSD_install options:" /SMP /!NOD /O1" --:--:-- @#netlabs dot org:3.16#@##1## 21 Jun 2009 10:01:49 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005- 2009 Build date: Jun 21 2009 10:01:52 --:--:-- MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 --:--:-- New Stack = FFE30000 Size:0x8000 --:--:-- AcpiOsInitialize ALLOC size 65536 at 0xF9A90000 --:--:-- AcpiOsInitialize MapMem size 4096 at 0xFFE8A000 --:--:-- AcpiOsPredefinedOverride: "_REV" --:--:-- AcpiOsPredefinedOverride: "_OS_" --:--:-- AcpiOsPredefinedOverride: override to eComStation --:--:-- AcpiOsPredefinedOverride: "_GL_" --:--:-- AcpiOsPredefinedOverride: "_OSI" --:--:-- ACPI: RSDP @ 0xFE020/0x14 (v0 INTEL ) --:--:-- ACPI: RSDT @ 0x7F6FD038/0x34 (v1 INTEL D945GLF2 0x7A 0x1000013) --:--:-- ACPI: FACP @ 0x7F6FC000/0x74 (v1 INTEL D945GLF2 0x7A MSFT 0x1000013) --:--:-- ACPI: DSDT @ 0x7F6F7000/0x45EC (v1 INTEL D945GLF2 0x7A MSFT 0x1000013) --:--:-- ACPI: FACS @ 0x7F6A3000/0x40 --:--:-- ACPI: APIC @ 0x7F6F6000/0x78 (v1 INTEL D945GLF2 0x7A MSFT 0x1000013) --:--:-- ACPI: WDDT @ 0x7F6F5000/0x40 (v1 INTEL D945GLF2 0x7A MSFT 0x1000013) --:--:-- ACPI: MCFG @ 0x7F6F4000/0x3C (v1 INTEL D945GLF2 0x7A MSFT 0x1000013) --:--:-- AcpiOsTableOverride Ex:FFE65000 New:FFE2FFA4 SIG:[DSDT] --:--:-- Table [DSDT] --:--:-- Table [FACS] --:--:-- Table [FACP] --:--:-- Table [APIC] --:--:-- Local APIC address: FEE00000h --:--:-- System also has 8259 --:--:-- APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable --:--:-- APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable --:--:-- APIC_PROCESSOR: ProcID 3h LocalApicID 82h - not usable --:--:-- APIC_PROCESSOR: ProcID 4h LocalApicID 83h - not usable --:--:-- APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 --:--:-- APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active : Bus spec Trigger by: Bus spec --:--:-- APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active : High 0 Trigger by: Level --:--:-- APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: Bus spec Trigger by: Bus spec --:--:-- APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: Bus spec Trigger by: Bus spec --:--:-- Table [WDDT] --:--:-- Table [MCFG] --:--:-- Size of FACDT 244 --:--:-- Type of computer - Unspecified --:--:-- System vector the SCI interrupt is wired to in 8259 mode. 9 --:--:-- System port address of the SMI Command Port 0xB2 --:--:-- The value to write to SMI_CMD to disable SMI 0xA0 --:--:-- The value to write to SMI_CMD to re-enable SMI 0xA1 --:--:-- The value to write to SMI_CMD to enter the S4BIOS state 0x0 --:--:-- System port address of the PM1a Event Register Block 400 --:--:-- System port address of the PM1b Event Register Block 0 --:--:-- Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 --:--:-- System port address of the PM1a Control Register Block 404 --:--:-- System port address of the PM1b Control Register Block 0 --:--:-- Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 --:--:-- System port address of the PM2 Control Register Block 420 --:--:-- Number of bytes decoded by PM2_CNT_BLK 1 --:--:-- System port address of the Power Management Timer Control Register Bloc k 408 --:--:-- Number of bytes decoded by PM_TMR_BLK (=4) 4 --:--:-- System port address of General-Purpose Event 0 Register Block 428 --:--:-- System port address of General-Purpose Event 1 Register Block 0 --:--:-- Number of bytes decoded by GPE0_BLK 0x8 --:--:-- Number of bytes decoded by GPE1_BLK 0x0 --:--:-- Offset within the ACPI general-purpose event model where GPE1 based eve nts start 0 --:--:-- The system does not support a C2 state. 65 --:--:-- The system does not support a C3 state 3E9 --:--:-- The zero-based index of where the processor's duty cycle setting is wit hin the processor's P_CNT register 1 --:--:-- The RTC CMOS RAM index to the day-of-month alarm value 13 --:--:-- IA-PC Boot Architecture Flags 0x0 --:--:-- Fixed feature flags 4A5 --:--:-- The reset register: --:--:-- Type of address space - System Memory Address 0x0 Width 0 Offset 0 Acce ss size 0 --:--:-- The value to write to the RESET_REG port to reset the system 0 --:--:-- ***** Throttl Width 0 Offset 1 --:--:-- evxfevnt-184 [4] Enable: Transition to ACPI mode successful --:--:-- evgpeblk-1120 [6] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x 9 --:--:-- AcpiOsInstallIntterrupHandler IRQ9 handler F9AD23CD --:--:-- AcpiOsDerivePCIID([PCI0] ,[PRR0],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 D ev:31 Fun:0 --:--:-- AcpiOsDerivePCIID([PCI0] ,[PRR1],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 D ev:31 Fun:0 --:--:-- AcpiOsDerivePCIID([PCI0] ,[ELR0],) Bus:0 Dev:0 Fun:0 - AcpiOsDerivePci - Dev: [IELK] Evaluate bad status=5 --:--:-- Derive: Bus:0 Dev:31 Fun:0 --:--:-- ** Scan EC Status = 0 Find 0 EC --:--:-- evgpeblk-1223 [5] EvInitializeGpeBlock: Found 8 Wake, Enabled 3 Runtime GPEs in this block --:--:-- ** AcpiInitializeObjects mask:0 Status = 0 --:--:-- Processor [CPU0] --:--:-- Processor [CPU1] --:--:-- Processor [CPU2] --:--:-- Processor [CPU3] --:--:-- Init ACPI rc=0 --:--:-- IO APIC N0 Phys:0xFEC00000 Lin:0xFFE47000 InitID:0x0 ArbID:0x0 Ver:32 L ines:23 --:--:-- WakeupVector Lin: FFE46000 Phys: 6F000 IPIStack:FFE44000 s_cpu:0 --:--:-- GetWakeupVector Status = 0 --:--:-- PIC Mask:FFFFDFFB --:--:-- PSD_GET_NUM_OF_PROCS - has 2 CPU --:--:-- ProcInit CPU0 --:--:-- LApic ID:0x0: ver 0x50014 --:--:-- Max LVT=6 --:--:-- Status Evaluate Processor PDC 0x5 AE_NOT_FOUND --:--:-- Status Evaluate Processor 0x0 AE_OK --:--:-- Usable:2 Counter:0 --:--:-- CPU id to N:0 --:--:-- ProcId: 0x1 --:--:-- P_BLK: 0x410 --:--:-- P_BLK len: 0x6 --:--:-- CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND --:--:-- CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND --:--:-- End init CPU0 rc:0 --:--:-- StartProcessor: CPU1 id 2 --:--:-- StartProcessor: Warm Vector:18000018, BootCode.Lin:0xFFE46000, BootCode .Phys:0x6F000 --:--:-- StartProcessor 1 id:2 LAPICid:1 --:--:-- Wait INI App Proc --:--:-- Send SIPI1 --:--:-- StartProcessor success SIPI1 --:--:-- ProcInit CPU1 --:--:-- LApic ID:0x1000000: ver 0x50014 --:--:-- Max LVT=6 --:--:-- End Startup code --:--:-- Set HLT duration as IOdelay:0x187 --:--:-- Status Evaluate Processor PDC 0x5 AE_NOT_FOUND --:--:-- Status Evaluate Processor 0x0 AE_OK --:--:-- Usable:2 Counter:1 --:--:-- CPU id to N:1 --:--:-- ProcId: 0x2 --:--:-- P_BLK: 0x410 --:--:-- P_BLK len: 0x6 --:--:-- CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND --:--:-- CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND --:--:-- End init CPU1 rc:0 --:--:-- UNMASK IRQ8 mask:FFFFDEFB Symbols linked (screen01) 21:34:49 UNMASK IRQ9 mask:FFFFDCFB 21:34:49 ** Create resource, max = 31 ** 21:34:49 OemHlpXHandler: ACPI_START_EVENTS 3 21:34:49 ** AcpiInstall Power Device Status = 0 21:34:49 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204 ] 21:34:49 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 21:34:49 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 21:34:49 ** AcpiInstall PMTimer Device Status = 0 21:34:49 ** Total use:63200 unuse:5064 count:1282 ** 21:34:49 Event [_L00] Install GPE0x0 21:34:49 Event [_L03] Install GPE0x3 21:34:49 Event [_L04] Install GPE0x4 21:34:49 Event [_L05] Install GPE0x5 21:34:49 Event [_L09] Install GPE0x9 21:34:49 Event [_L0A] Install GPE0xA 21:34:49 Event [_L0B] Install GPE0xB 21:34:49 Event [_L0C] Install GPE0xC 21:34:49 Event [_L0D] Install GPE0xD 21:34:49 Event [_L0E] Install GPE0xE 21:34:49 Event [_L1D] Install GPE0x1D 21:34:49 EndScan GPE Status 0 21:34:49 OemHlpXHandler: ACPI_START_EVENTS 4 21:34:49 OemHlpXHandler: CallACPI16: 4900907, CallACPI32: F9AA5D8E, ExportTable3 2: F9C002B8