KEE Version 0x10000 @#netlabs dot org:3.13#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Nov 27 2008 00:19:10 MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0 SS Selector fault CFG: Link [LNKA] IRQ10 CFG: Link [LNKB] IRQ6 AcpiOsInitialize ALLOC size 65536 at 0xF9A03000 AcpiOsInitialize MapMem size 4096 at 0xFFEA1000 AcpiOsCreateLock F9B671A0 AcpiOsCreateLock F9B6CB64 AcpiOsPredefinedOverride: "_REV" AcpiOsPredefinedOverride: "_OS_" AcpiOsPredefinedOverride: override to eComStation AcpiOsPredefinedOverride: "_GL_" AcpiOsPredefinedOverride: "_OSI" *** AcpiInitializeSubsystem Status = 0 *** ACPI: RSDP @ 0xF6DF0/0x24 (v2 IBM ) ACPI: XSDT @ 0x3FF6A6CD/0x4C (v1 IBM TP-1R 0x3130 LTP 0x0) ACPI: FACP @ 0x3FF6A800/0xF4 (v3 IBM TP-1R 0x3130 IBM 0x1) ACPI Warning (tbfadt-543): Optional field "Gpe1Block" has zero address or length: 0102C/0 [20081031] ACPI: DSDT @ 0x3FF6A9E7/0xC4D5 (v1 IBM TP-1R 0x3130 MSFT 0x100000E) ACPI: FACS @ 0x3FF78000/0x40 ACPI: SSDT @ 0x3FF6A9B4/0x33 (v1 IBM TP-1R 0x3130 MSFT 0x100000E) ACPI: ECDT @ 0x3FF76EBC/0x52 (v1 IBM TP-1R 0x3130 IBM 0x1) ACPI: TCPA @ 0x3FF76F0E/0x32 (v1 IBM TP-1R 0x3130 PTL 0x1) ACPI: BOOT @ 0x3FF76FD8/0x28 (v1 IBM TP-1R 0x3130 LTP 0x1) *** AcpiInitializeTables Status = 0 *** AcpiOsTableOverride Ex:FFE839E7 New:FFDEADA4 SIG:[DSDT] *** AcpiLoadTables Status = 0 *** Table [DSDT] Table [FACS] Table [FACP] Table [SSDT] Table [ECDT] EC Control: 66:1:8:0:0 EC Data: 62:1:8:0:0 UID: 0 GPE bit: 1C Name in ACPI:\_SB.PCI0.LPC.EC Status GetHandle: 0 - AE_OK Table [TCPA] Table [BOOT] Size of FACDT 244 Type of computer - Mobile System vector the SCI interrupt is wired to in 8259 mode. 9 System port address of the SMI Command Port 0xB2 The value to write to SMI_CMD to disable SMI 0xF0 The value to write to SMI_CMD to re-enable SMI 0xF1 The value to write to SMI_CMD to enter the S4BIOS state 0x0 The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0xF3 System port address of the PM1a Event Register Block 1000 System port address of the PM1b Event Register Block 0 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 System port address of the PM1a Control Register Block 1004 System port address of the PM1b Control Register Block 0 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 System port address of the PM2 Control Register Block 1020 Number of bytes decoded by PM2_CNT_BLK 1 System port address of the Power Management Timer Control Register Block 1008 Number of bytes decoded by PM_TMR_BLK (=4) 4 System port address of General-Purpose Event 0 Register Block 1028 System port address of General-Purpose Event 1 Register Block 0 Number of bytes decoded by GPE0_BLK 0x8 Number of bytes decoded by GPE1_BLK 0x0 Offset within the ACPI general-purpose event model where GPE1 based events start 0 GPE enable register: 0: 0: 0: 10 GPE status register: 0: 0: FF: 8 The value OSPM writes to the SMI_CMD register to indicate OS support for the _CST object and C States Changed notification 0xF4 The worst-case hardware latency to enter and exit a C2 state 1 us The worst-case hardware latency to enter and exit a C3 state 85 us The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 The bit width of the processor's duty cycle setting value in the P_CNT register 3 The RTC CMOS RAM index to the day-of-month alarm value 13 The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50 IA-PC Boot Architecture Flags 0x3 Fixed feature flags 2AD The reset register: Type of address space - System I/O Register Bit Width 8 Register Bit Offset 0 Access size 0 Address 3321 The value to write to the RESET_REG port to reset the system 6 ***** Throttl Width 3 Offset 1 AcpiOsInstallIntterrupHandler IRQ9 handler F9B93BAB ** AcpiEnableSubsystem Status = 0 ** AcpiInstallAddressSpaceHandler N0 EC Status = 0 count 1 ECadr:F9B61AAC - AE_OK Install GPE Status 0 GpeSetType Status = 0 - AE_OK EC[0] GPE1C GpeEnable Status = 0 - AE_OK AcpiOsDerivePCIID([PCI0] ,[MHCS],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0 AcpiOsDerivePCIID([PCI0] ,[LPCS],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0 AcpiEcSetup handle F9A085C0 Function 0 Count 1 Emm Setup St:8 AcpiWaitIBF rc=640 IBF:0 AcpiWaitOBF rc=640 OBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitOBF rc=640 OBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitOBF rc=640 OBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitOBF rc=640 OBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitOBF rc=640 OBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitOBF rc=640 OBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiOsDerivePCIID([PCI0] ,[CBUS],) Bus:0 Dev:0 Fun:0 - Derive: Bus:2 Dev:0 Fun:0 AcpiOsDerivePCIID([PCI0] ,[CBUS],) Bus:0 Dev:0 Fun:1 - Derive: Bus:2 Dev:0 Fun:1 AcpiOsDerivePCIID([PCI0] ,[U7CS],) Bus:0 Dev:29 Fun:7 - Derive: Bus:0 Dev:29 Fun:7 ** AcpiInitializeObjects mask:0 Status = 0 Processor [CPU_] Status 0x0 0 Status Evaluate Processor PDC 0x0 AE_OK Status Evaluate Processor 0x0 AE_OK Status C 0x0 AE_OK Usable:1 Counter:0 CPU id to N:0 ProcId: 0x1 P_BLK: 0x1010 P_BLK len: 0x6 CPU0 Status Evaluate _PCT 0x0 AE_OK Perf control: 0xB2 Perf status: 0xB3 AcpiWaitIBF rc=640 IBF:0 AcpiWaitOBF rc=640 OBF:0 CPU0 Status Evaluate _CST 0x0 AE_OK _CST has 4 Cstates C1State control: 0x0 Latency: 1 uSec Power consuption: 1000 mWatt C2State control: 0x1014 Latency: 1 uSec Power consuption: 500 mWatt C3State control: 0x1015 Latency: 85 uSec Power consuption: 250 mWatt C3State control: 0x1016 Latency: 185 uSec Power consuption: 100 mWatt Found bridge "PCI0" Addr:0x0 BBN is 0 Dev:0x0 Fun:0x0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitOBF rc=640 OBF:0 AcpiWaitIBF rc=640 IBF:0 AcpiWaitOBF rc=640 OBF:0 Finding:1 bridges 0:0.0 Class:600 Hdr:0 Bridge H->0 0:1.0 Class:604 Hdr:1 Bridge 0->1 0:29.0 Class:C03 Hdr:80 0:29.1 Class:C03 Hdr:0 0:29.2 Class:C03 Hdr:0 0:29.7 Class:C03 Hdr:0 0:30.0 Class:604 Hdr:1 Bridge 0->2..8 0:31.0 Class:601 Hdr:80 0:31.1 Class:101 Hdr:0 0:31.3 Class:C05 Hdr:0 0:31.5 Class:401 Hdr:0 0:31.6 Class:703 Hdr:0 1:0.0 Class:300 Hdr:0 2:0.0 Class:607 Hdr:82 Bridge 2->3..5 2:0.1 Class:607 Hdr:82 Bridge 2->6..8 2:1.0 Class:200 Hdr:0 2:2.0 Class:200 Hdr:0 PCI Bus scan: 9 PCI buses found. Scan ACPI tree for PCI functions 0:0.0 'PCI0' (F9A05E10) 0:31.0 'LPC_' (F9A05E38) 0:1.0 'AGP_' (F9A0E4B0) 1:0.0 'VID_' (F9A0E870) 0:30.0 'PCI1' (F9A0F4A8) 2:0.0 'CBS0' (F9A0F570) 2:0.1 'CBS1' (F9A0F858) 2:3.0 'DOCK' (F9A0FB40) 0:31.1 'IDE0' (F9A12470) 0:29.0 'USB0' (F99F36F8) 0:29.1 'USB1' (F99F3A30) 0:29.2 'USB2' (F99F3C68) 0:29.7 'USB7' (F99F3CB8) 0:31.6 'AC9M' (F99F3FF0) Bridges found: 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9A05E10) _PRT 0:1.0 class:604 type: 1 Bus 0->1 ACPI: 'AGP_' (F9A0E4B0) _PRT 0:30.0 class:604 type: 1 Bus 0->2 ACPI: 'PCI1' (F9A0F4A8) _PRT 2:0.0 class:607 type: 2 Bus 2->3 ACPI: 'CBS0' (F9A0F570) 2:0.1 class:607 type: 2 Bus 2->6 ACPI: 'CBS1' (F9A0F858) IRQLinks found: Set: 10 Set: 10 Set: 10 Set: 10 0: 'LNKA' (F9A047C8) P[ 3, 4, 5, 6, 7, 9,*10, 11] <- 2:1.0 2:0.0 1:0.0 0:29.0 A[] 1: 'LNKD' (F9A04EA0) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.1 A[] 2: 'LNKC' (F9A04C58) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 2:2.0 0:31.1 0:29.2 A[] 3: 'LNKH' (F9A057C0) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.7 A[] Set: 6 Set: 6 Set: 6 Set: 6 4: 'LNKB' (F9A04A10) P[ 3, 4, 5,*6, 7, 9, 10, 11] <- 2:0.1 0:31.6 0:31.5 0:31.3 A[] 5: 'LNKE' (F9A050E8) P[] A[] PCI devices found: 0:0.0 8086:3340 'PCI0' 0:1.0 8086:3341 'AGP_' 0:29.0 8086:24C2 'USB0' IRQs: PCI:11 PIC:'LNKA':11 APIC:0 0:29.1 8086:24C4 'USB1' IRQs: PCI:11 PIC:'LNKD':11 APIC:0 0:29.2 8086:24C7 'USB2' IRQs: PCI:11 PIC:'LNKC':11 APIC:0 0:29.7 8086:24CD 'USB7' IRQs: PCI:11 PIC:'LNKH':11 APIC:0 0:30.0 8086:2448 'PCI1' 0:31.0 8086:24CC 'LPC_' 0:31.1 8086:24CA 'IDE0' IRQs: PCI:0 PIC:'LNKC':11 APIC:0 0:31.3 8086:24C3 IRQs: PCI:11 PIC:'LNKB':11 APIC:0 0:31.5 8086:24C5 IRQs: PCI:11 PIC:'LNKB':11 APIC:0 0:31.6 8086:24C6 'AC9M' IRQs: PCI:11 PIC:'LNKB':11 APIC:0 1:0.0 1002:4C57 'VID_' IRQs: PCI:11 PIC:'LNKA':11 APIC:0 2:0.0 104C:AC46 'CBS0' IRQs: PCI:11 PIC:'LNKA':11 APIC:0 2:0.1 104C:AC46 'CBS1' IRQs: PCI:11 PIC:'LNKB':11 APIC:0 2:1.0 8086:101E IRQs: PCI:11 PIC:'LNKA':11 APIC:0 2:2.0 168C:13 IRQs: PCI:11 PIC:'LNKC':11 APIC:0 Bus detected - 8 ** AcpiInstall Power Device Status = 0 ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031] ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031] ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE ** AcpiInstall PMTimer Device Status = 0 ** Total use:198440 unuse:11200 count:3869 ** Get GpeHdl Status = 0 - AE_OK Event [_L18] Install GPE0x18 Status 0x0 EndScan GPE Status 0 ===== Info ======== Int Level 9 In Xrupt F99E6C60 in arg F99E6C60 Node Name [_GPE] Flags: 0 Reg count 4 GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0 Status:1028 Enable:102C EnableWake:38 EnableRun:0 BaseGPENumber:0 GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0 GPE1 Status:1029 Enable:102D EnableWake:28 EnableRun:0 BaseGPENumber:8 GPE2 Status:102A Enable:102E EnableWake:0 EnableRun:0 BaseGPENumber:10 GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x1C Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x1D Flag:0x2 Status - Set 0x0 Enable 0x0 GPE3 Status:102B Enable:102F EnableWake:21 EnableRun:10 BaseGPENumber:18 =========== Status 0x0 0 APM: PSD find success. PSD Ftable:F9B6017C APM:Max C state 0 Register Notify 1st FEE2528D FindPCIDevice Need: B:0 D:1F F:1 Finding APIC0 PIC11 Dev: [IDE0] Uniaud32: PSD find success. PSD Ftable:F9B6017C FindPCIDevice Need: B:0 D:1F F:0 APM: Found Smart Battery "BAT0" APM: Found Smart Battery "BAT1" Check - IRQ AcpiWaitOBF Ctl=9 OBF=1 EC arm "_Q24" N:0 Cur:0 APM: Unknown design capacity APM: Found AC "AC__" Check - IRQ AcpiWaitOBF Ctl=9 OBF=1 EC arm "_Q4B" N:1 Cur:0 ******** Event tread *************** AllocateSuspendMemory s_cpu:0 Alloc s_cpu OK CPU0 2304 bytes at 0 AllocSuspend: CPU0 CR3:200000 Status 1Mb alloc 0 ======= Execute EC 0 queue =========== AcpiOsExecute type:1 ======= Execute EC 1 queue =========== AcpiOsExecute type:1 ======= ACPIOSExecute 0 function =========== *** Device Notify *** Dev: [BAT0] Value:80 Calling FEE2528D APM: ******** Notify: 80 ********* APM: ******** End Notify: 80 ********* ======= ACPIOSExecute 1 function =========== *** Device Notify *** Dev: [BAT0] Value:80 Calling FEE2528D APM: ******** Notify: 80 ********* APM: ******** End Notify: 80 ********* APM: Unsetting suspend state AcpiWaitOBF rc=640 OBF:1 Interrupt NOT Handled!!!! AcpiWaitOBF rc=640 OBF:1 Interrupt NOT Handled!!!!