AllocIRQMem at 0xFFE64000 (24576 bytes) @#netlabs dot org:3.11#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Sep 30 2008 13:49:18 MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 New Stack = FFE50000 Size:0x8000 PSD_INIT ESP=0xFFE4FFE0 AcpiOsInitialize ALLOC size 65536 at 0xF9AB0000 AcpiOsInitialize MapMem size 4096 at 0xFFE8A000 AcpiOsCreateLock F9C172E4 AcpiOsCreateLock F9C1CCB4 AcpiOsPredefinedOverride: "_REV" AcpiOsPredefinedOverride: "_OS_" AcpiOsPredefinedOverride: override to eComStation AcpiOsPredefinedOverride: "_GL_" AcpiOsPredefinedOverride: "_OSI" *** AcpiInitializeSubsystem Status = 0 *** ACPI: RSDP @ 0xF6750/0x14 (v0 LENOVO) ACPI: RSDT @ 0x3BF12562/0x40 (v1 LENOVO TC-2N 0x31 LTP 0x0) ACPI: FACP @ 0x3BF16C64/0x74 (v1 LENOVO TC-2N 0x31 PTL_ 0xF4240) ACPI: DSDT @ 0x3BF125A2/0x46C2 (v1 LENOVO TC-2N 0x31 MSFT 0x100000E) ACPI: FACS @ 0x3BF17FC0/0x40 ACPI: TCPA @ 0x3BF16CD8/0x32 (v2 LENOVO TC-2N 0x31 PTL 0x1) ACPI: SSDT @ 0x3BF16D0A/0x206 (v1 PTLTD POW2NNOW 0x31 LTP 0x1) ACPI: MCFG @ 0x3BF16F10/0x3C (v1 PTLTD M2NG 0x31 LTP 0x0) ACPI: HPET @ 0x3BF16F4C/0x38 (v1 PTLTD HPE2NBL 0x31 LTP 0x1) ACPI: APIC @ 0x3BF16F84/0x54 (v1 PTLTD 0x31 LTP 0x0) ACPI: BOOT @ 0x3BF16FD8/0x28 (v1 PTLTD $SB2NBL$ 0x31 LTP 0x1) *** AcpiInitializeTables Status = 0 *** AcpiOsTableOverride Ex:FFE2B5A2 New:FFE4FFAC SIG:[DSDT] tbxface-620 [2] TbLoadNamespace: ACPI Tables successfully acquired *** AcpiLoadTables Status = 0 *** Table [DSDT] Table [FACS] Table [FACP] Table [TCPA] Table [SSDT] Table [MCFG] Table [HPET] Table [APIC] Local APIC address: FEE00000h System also has 8259 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge Table [BOOT] Size of FACDT 244 Type of computer - Unspecified System vector the SCI interrupt is wired to in 8259 mode. 9 System port address of the SMI Command Port 0x142E The value to write to SMI_CMD to disable SMI 0xF0 The value to write to SMI_CMD to re-enable SMI 0xF1 The value to write to SMI_CMD to enter the S4BIOS state 0x0 System port address of the PM1a Event Register Block 1000 System port address of the PM1b Event Register Block 0 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 System port address of the PM1a Control Register Block 1004 System port address of the PM1b Control Register Block 0 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 System port address of the PM2 Control Register Block 1484 Number of bytes decoded by PM2_CNT_BLK 1 System port address of the Power Management Timer Control Register Block 1008 Number of bytes decoded by PM_TMR_BLK (=4) 4 System port address of General-Purpose Event 0 Register Block 1020 System port address of General-Purpose Event 1 Register Block 0 Number of bytes decoded by GPE0_BLK 0x8 Number of bytes decoded by GPE1_BLK 0x0 Offset within the ACPI general-purpose event model where GPE1 based events start 0 GPE enable register: 0: 0: 10: 0 GPE status register: 2: 0: 0: 0 The system does not support a C2 state. FFFF The system does not support a C3 state FFFF The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 The RTC CMOS RAM index to the day-of-month alarm value 125 The RTC CMOS RAM index to the month of year alarm value 126 The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50 IA-PC Boot Architecture Flags 0x0 Fixed feature flags A5 The reset register: Type of address space - System Memory Register Bit Width 0 Register Bit Offset 0 Access size 0 Address 0 The value to write to the RESET_REG port to reset the system 0 ***** Throttl Width 0 Offset 1 evxfevnt-176 [2] Enable: Transition to ACPI mode successful evgpeblk-1111 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x9 AcpiOsInstallIntterrupHandler IRQ9 handler F9AEEC41 ** AcpiEnableSubsystem Status = 0 AcpiOsDerivePCIID([PCI0] ,[MMTO],) Bus:0 Dev:10 Fun:0 - Derive: Bus:0 Dev:10 Fun:0 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:10 Fun:0 - Derive: Bus:0 Dev:10 Fun:0 ** Scan EC Status = 0 Completing Region/Field/Buffer/Package initialization:.................................................................................... Initialized 22/29 Regions 5/5 Fields 30/30 Buffers 27/27 Packages (673 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods: Executed 0 _INI methods requiring 0 _STA executions (examined 82 objects) evgpeblk-1211 [3] EvInitializeGpeBlock: Found 5 Wake, Enabled 2 Runtime GPEs in this block ** AcpiInitializeObjects mask:0 Status = 0 Processor [CPU0] Processor [CPU1] Status 0x0 0 Init ACPI rc=0 APIC0 phys FEC00000 lin: FFE45000 APIC ID 2000000 (170011) Ver 11 MaxIO entry 0x17 (2000000) Arbitration ID 2 set to (2000000) 2 Id (2000000) 2 Set 24 lines from IRQ0 WakeupVector Lin: FFE44000 Phys: 6D000 IPIStack:FFE31000 s_cpu:0 GetWakeupVector Status = 0 PIC Mask:FFFFDFFB ProcInit CPU0 UNMASK IRQ8 mask 0xFFFFDEFB Real:FFEB7CAC OemHlpXHandler: ACPI.CFG opened: Size is 3355 bytes OemHlpXHandler: ACPI.CFG read: 3355 bytes OemHlpXHandler: ACPI.CFG closed: 0, Buffer at FD39E4D8 PSDFree: at 0xF9C00000 success! Found bridge "PCI0" BBN is absent status:5 Finding:0 bridges 0:0.0 Class:500 Hdr:80 0:0.1 Class:500 Hdr:80 0:0.2 Class:500 Hdr:80 0:0.3 Class:500 Hdr:80 0:0.4 Class:500 Hdr:0 0:0.5 Class:500 Hdr:80 0:0.6 Class:500 Hdr:80 0:0.7 Class:500 Hdr:80 0:2.0 Class:604 Hdr:1 Bridge 0->1 0:5.0 Class:300 Hdr:0 0:9.0 Class:500 Hdr:0 0:10.0 Class:601 Hdr:80 0:10.1 Class:C05 Hdr:80 0:10.2 Class:500 Hdr:80 0:11.0 Class:C03 Hdr:80 0:11.1 Class:C03 Hdr:80 0:13.0 Class:101 Hdr:0 0:14.0 Class:101 Hdr:0 0:16.0 Class:604 Hdr:81 Bridge 0->3 0:16.1 Class:403 Hdr:80 0:24.0 Class:600 Hdr:80 Bridge H->0 0:24.1 Class:600 Hdr:80 Bridge H->0 0:24.2 Class:600 Hdr:80 Bridge H->0 0:24.3 Class:600 Hdr:80 Bridge H->0 3:8.0 Class:200 Hdr:0 PCI Bus scan: 4 PCI buses found. Scan ACPI tree for PCI functions 0:0.0 'PCI0' (F9AB2088) 0:10.0 'LPC0' (F9AB2618) 0:0.6 'Z003' (F9AB5890) 0:10.1 'SMB0' (F9AB5968) 0:11.0 'USB0' (F9AB5FB8) 0:11.1 'USB2' (F9AB6128) 0:20.0 'MAC0' (F9AB61A0) 0:16.1 'AZA0' (F9AB6218) 0:16.2 'ACI0' (F9AB6268) 0:16.3 'MCI0' (F9AB62B8) 0:16.0 'P2P0' (F9AB6308) 3:5.0 'SLT0' (F9AB6550) 3:6.0 'SLT1' (F9AB65C8) 3:8.0 'LANC' (F9AB6640) 0:13.0 'IDE0' (F9AB68A0) 0:14.0 'SAT0' (F9AB7360) 0:15.0 'SAT1' (F9AB77E0) 0:4.0 'XVR0' (F9AB7C60) 0:3.0 'XVR1' (F9AB7E80) 0:2.0 'XVR2' (F9AB8150) 1:0.0 'X2S0' (F9AB8370) Bridges found: 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9AB2088) _PRT 0:2.0 class:604 type: 1 Bus 0->1 ACPI: 'XVR2' (F9AB8150) _PRT 0:16.0 class:604 type: 1 Bus 0->3 ACPI: 'P2P0' (F9AB6308) _PRT IRQLinks found: 0: 'LSMB' (F9AB9E90) P[ 5, 7, 9,*10, 11, 14, 15] <- 0:10.1 A[ 16,#17, 18, 19, 20, 21, 22, 23] <- 0:10.1 1: 'LUS0' (F9ABA340) P[*5, 7, 9, 10, 11, 14, 15] <- 0:11.0 A[ 16, 17,#18, 19, 20, 21, 22, 23] <- 0:11.0 2: 'LUS2' (F9ABA598) P[ 5, 7, 9,*10, 11, 14, 15] <- 0:11.1 A[ 16, 17, 18,#19, 20, 21, 22, 23] <- 0:11.1 3: 'LMAC' (F9ABA7F0) P[] A[] 4: 'LAZA' (F9ABAA48) P[ 5, 7, 9, 10, 11, 14, 15] <- 0:16.1 A[ 16, 17, 18, 19, 20,#21, 22, 23] <- 0:16.1 5: 'LACI' (F9ABACA0) P[] A[] 6: 'LMCI' (F9ABAEF8) P[] A[] 7: 'LPID' (F9ABB150) P[] A[] 8: 'LTID' (F9ABB3A8) P[ 5, 7, 9,*10, 11, 14, 15] <- 0:14.0 A[ 16, 17, 18, 19,#20, 21, 22, 23] <- 0:14.0 9: 'LSI1' (F9ABB600) P[] A[] 10: 'LK3E' (F9AB99E0) P[ 5, 7, 9,*10, 11, 14, 15] <- 0:5.0 A[#16, 17, 18, 19, 20, 21, 22, 23] <- 0:5.0 11: 'LK4E' (F9AB9C38) P[] A[] 12: 'LK1E' (F9AB9530) P[] A[] 13: 'LK2E' (F9AB9788) P[] A[] 14: 'LNK1' (F9AB8BD0) P[] A[] 15: 'LNK2' (F9AB8E28) P[] A[] 16: 'LNK3' (F9AB9080) P[] A[] 17: 'LNK4' (F9AB92D8) P[ 5, 7, 9, 10,*11, 14, 15] <- 3:8.0 A[ 5, 7, 10,*11, 14, 15] <- 3:8.0 PCI devices found: 0:0.0 10DE:2F1 'PCI0' 0:0.1 10DE:2FA 0:0.2 10DE:2FE 0:0.3 10DE:2F8 0:0.4 10DE:2F9 0:0.5 10DE:2FF 0:0.6 10DE:27F 'Z003' 0:0.7 10DE:27E 0:2.0 10DE:2FC 'XVR2' 0:5.0 10DE:242 IRQs: PCI:10 PIC:'LK3E':10 APIC:'LK3E':16 MSI 0:9.0 10DE:270 0:10.0 10DE:261 'LPC0' 0:10.1 10DE:264 'SMB0' IRQs: PCI:10 PIC:'LSMB':10 APIC:'LSMB':17 0:10.2 10DE:272 0:11.0 10DE:26D 'USB0' IRQs: PCI:5 PIC:'LUS0':5 APIC:'LUS0':18 0:11.1 10DE:26E 'USB2' IRQs: PCI:10 PIC:'LUS2':10 APIC:'LUS2':19 0:13.0 10DE:265 'IDE0' 0:14.0 10DE:266 'SAT0' IRQs: PCI:10 PIC:'LTID':10 APIC:'LTID':20 MSI 0:16.0 10DE:26F 'P2P0' 0:16.1 10DE:26C 'AZA0' IRQs: PCI:10 PIC:'LAZA': R 10 APIC:'LAZA':21 MSI 0:24.0 1022:1100 0:24.1 1022:1101 0:24.2 1022:1102 0:24.3 1022:1103 3:8.0 14E4:169C 'LANC' IRQs: PCI:11 PIC:'LNK4':11 APIC:'LNK4':11 MSI Bus detected - 3 =========== Status set APIC mode 0x0 UNMASK IRQ9 mask 0xFFFFDCFB Real:FFEB7CAC ** Create resource, max = 31 ** OemHlpXHandler: ACPI_START_EVENTS 3 ** AcpiInstall Power Device Status = 0 ACPI Error (evxfevnt-288): Could not enable SleepButton event [20080729] ACPI Warning (evxface-235): Could not enable fixed event 3 [20080729] ** AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE ** AcpiInstall PMTimer Device Status = 0 ** Total use:102104 unuse:7960 count:1791 ** Get GpeHdl Status = 0 - AE_OK Event [_L00] Install GPE0x0 Status 0x0 Event [_L03] Install GPE0x3 Status 0x0 Event [_L05] Install GPE0x5 Status 0x0 Event [_L0B] Install GPE0xB Status 0x0 Event [_L0D] Install GPE0xD Status 0x0 Event [_L10] Install GPE0x10 Status 0x0 Event [_L14] Install GPE0x14 Status 0x0 EndScan GPE Status 0 ===== Info ======== Int Level 9 In Xrupt F9AA0B60 in arg F9AA0B60 Node Name [_GPE] Flags: 0 Reg count 4 GPE0x0 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x3 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0 Status:1020 Enable:1024 EnableWake:21 EnableRun:8 BaseGPENumber:0 GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0 GPE1 Status:1021 Enable:1025 EnableWake:28 EnableRun:0 BaseGPENumber:8 GPE0x10 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x14 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE2 Status:1022 Enable:1026 EnableWake:1 EnableRun:10 BaseGPENumber:10 GPE3 Status:1023 Enable:1027 EnableWake:0 EnableRun:0 BaseGPENumber:18 =========== Status 0x0 0 OemHlpXHandler: ACPI_START_EVENTS 4 OemHlpXHandler: CallACPI16: 4900909, CallACPI32: F9AC54A2, ExportTable32: F9C10178 UNMASK IRQ1 mask 0xFFFFDCF9 Real:FFEB7CAC UNMASK IRQ10 mask 0xFFFFD8F9 Real:FFEB7CAC PIC MASK IRQ10 mask:FFFFDCF9 UNMASK IRQ5 mask 0xFFFFDCD9 Real:FFEB7CAC PIC MASK IRQ5 mask:FFFFDCF9 APM: PSD find success. PSD Ftable:F9C1017C Register Notify 1st FFC6A1CE UNMASK IRQ6 mask 0xFFFFDCB9 Real:FFEB7CAC PIC MASK IRQ6 mask:FFFFDCF9 UNMASK IRQ6 mask 0xFFFFDCB9 Real:FFEB7CAC PIC MASK IRQ6 mask:FFFFDCF9 FindPCIDevice Need: B:0 D:D F:0 FindPCIDevice Need: B:0 D:E F:0 Finding APIC0 PIC10 Dev: [SAT0] UNMASK IRQ14 mask 0xFFFF9CF9 Real:FFEB7CAC PIC MASK IRQ14 mask:FFFFDCF9 UNMASK IRQ14 mask 0xFFFF9CF9 Real:FFEB7CAC PIC MASK IRQ14 mask:FFFFDCF9 UNMASK IRQ14 mask 0xFFFF9CF9 Real:FFEB7CAC PIC MASK IRQ14 mask:FFFFDCF9 UNMASK IRQ14 mask 0xFFFF9CF9 Real:FFEB7CAC UNMASK IRQ10 mask 0xFFFF98F9 Real:FFEB7CAC PIC MASK IRQ10 mask:FFFF9CF9 UNMASK IRQ10 mask 0xFFFF98F9 Real:FFEB7CAC PIC MASK IRQ10 mask:FFFF9CF9 UNMASK IRQ10 mask 0xFFFF98F9 Real:FFEB7CAC PIC MASK IRQ10 mask:FFFF9CF9 UNMASK IRQ10 mask 0xFFFF98F9 Real:FFEB7CAC PIC MASK IRQ14 mask:FFFFD8F9 UNMASK IRQ14 mask 0xFFFF98F9 Real:FFEB7CAC PIC MASK IRQ10 mask:FFFF9CF9 UNMASK IRQ10 mask 0xFFFF98F9 Real:FFEB7CAC PIC MASK IRQ1 mask:FFFF98FB UNMASK IRQ1 mask 0xFFFF98F9 Real:FFEB7CAC UNMASK IRQ12 mask 0xFFFF88F9 Real:FFEB7CAC UNMASK IRQ4 mask 0xFFFF88E9 Real:FFEB7CAC PIC MASK IRQ4 mask:FFFF88F9 Gradd: PSD find success. PSD Ftable:F9C1017C UNMASK IRQ5 mask 0xFFFF88D9 Real:FFEB7CAC UNMASK IRQ10 mask 0xFFFF88D9 Real:FFEB7CAC OemHlpXHandler: CMD_INIT_COMPLETE PSD_SET_ADV_INT_MODE Apic 0 IOMask FFFFFFFF Mask:FFFF88D9 UNMASK IRQ0 mask 0xFFFF88D8 Real:FFEB7CAC ******** Event tread *************** AllocateSuspendMemory s_cpu:0 Alloc s_cpu OK CPU0 2304 bytes at FE600BD0 AllocSuspend: CPU0 CR3:225000 Status 1Mb alloc 0 APM: Setting suspend state:1 Button KernBlock 4294967295 timeout AcpiExecSMPFunction: Unicall AcpiExecSMPFunction: End