AllocIRQMem at 0xFFE88000 (24576 bytes) PSD_install options:" /SMP /ACPI /TMR /!NOD" @#netlabs dot org:3.9#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Apr 23 2008 03:50:52 MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 New Stack = FFD00000 Size:0x8000 AcpiOsInitialize ALLOC size 65536 at 0xF9700000 AcpiOsInitialize MapMem size 4096 at 0xFFE9D000 AcpiOsCreateLock F9C1733C AcpiOsCreateLock F9C1CD04 AcpiOsPredefinedOverride: "_REV" AcpiOsPredefinedOverride: "_OS_" AcpiOsPredefinedOverride: override to eComStation AcpiOsPredefinedOverride: "_GL_" AcpiOsPredefinedOverride: "_OSI" *** AcpiInitializeSubsystem Status = 0 *** ACPI: RSDP @ 0xFA860/0x14 (v0 ACPIAM) ACPI: RSDT @ 0x77FB0000/0x38 (v1 A_M_I OEMRSDT 0x8000708 MSFT 0x97) ACPI: FACP @ 0x77FB0200/0x84 (v2 A M I OEMFACP 0x12000601 MSFT 0x97) ACPI: DSDT @ 0x77FB0440/0x4BE8 (v1 AM2N6 AM2N6221 0x221 INTL 0x20051117) ACPI: FACS @ 0x77FC0000/0x40 ACPI: APIC @ 0x77FB0390/0x70 (v1 A_M_I OEMAPIC 0x8000708 MSFT 0x97) ACPI: MCFG @ 0x77FB0400/0x3C (v1 A_M_I OEMMCFG 0x8000708 MSFT 0x97) ACPI: OEMB @ 0x77FC0040/0x60 (v1 A_M_I AMI_OEM 0x8000708 MSFT 0x97) ACPI: SSDT @ 0x77FB5030/0x248 (v1 A M I POWERNOW 0x1 AMD 0x1) *** AcpiInitializeTables Status = 0 *** AcpiOsTableOverride Ex:FFD15440 New:FFCFFFC4 SIG:[DSDT] *** AcpiLoadTables Status = 0 *** Table [DSDT] Table [FACS] Table [FACP] Table [APIC] Local APIC address: FEE00000h System also has 8259 APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level APIC_XRUPT_OVERRIDE: Bus: 0h Source 14 Global SysInt 14 - Polarity active: High 0 Trigger by: Edge APIC_XRUPT_OVERRIDE: Bus: 0h Source 15 Global SysInt 15 - Polarity active: High 0 Trigger by: Edge Table [MCFG] Table [OEMB] Table [SSDT] Size of FACDT 244 Type of computer - Unspecified System vector the SCI interrupt is wired to in 8259 mode. 9 System port address of the SMI Command Port 0x442E The value to write to SMI_CMD to disable SMI 0xE1 The value to write to SMI_CMD to re-enable SMI 0x1E The value to write to SMI_CMD to enter the S4BIOS state 0x0 System port address of the PM1a Event Register Block 4000 System port address of the PM1b Event Register Block 0 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 System port address of the PM1a Control Register Block 4004 System port address of the PM1b Control Register Block 0 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 System port address of the PM2 Control Register Block 0 System port address of the Power Management Timer Control Register Block 4008 Number of bytes decoded by PM_TMR_BLK (=4) 4 System port address of General-Purpose Event 0 Register Block 4020 System port address of General-Purpose Event 1 Register Block 44A0 Number of bytes decoded by GPE0_BLK 0x8 Number of bytes decoded by GPE1_BLK 0x10 Offset within the ACPI general-purpose event model where GPE1 based events start 20 GPE enable register: 0: 0: 0: 0 GPE status register: 40: 0: 0: 0 The system does not support a C2 state. 65 The system does not support a C3 state 3E9 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 The RTC CMOS RAM index to the day-of-month alarm value 125 The RTC CMOS RAM index to the month of year alarm value 126 The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50 IA-PC Boot Architecture Flags 0x0 Fixed feature flags A5 The reset register: Type of address space - System I/O Register Bit Width 8 Register Bit Offset 0 Access size 0 Address 3321 The value to write to the RESET_REG port to reset the system 6 ***** Throttl Width 0 Offset 1 AcpiOsInstallIntterrupHandler IRQ9 handler F9731D49 ** AcpiEnableSubsystem Status = 0 AcpiOsDerivePCIID([PCI0] ,[LPDC],) Bus:0 Dev:1 Fun:0 - Derive: Bus:0 Dev:1 Fun:0 AcpiOsDerivePCIID([PCI0] ,[PIMC],) Bus:0 Dev:1 Fun:0 - Derive: Bus:0 Dev:1 Fun:0 ** Scan EC Status = 0 AcpiOsDerivePCIID([PCI0] ,[JREG],) Bus:0 Dev:0 Fun:65535 - Pci config status=1001 Derive: Bus:2 Dev:0 Fun:65535 ACPI Exception (evregion-529): AE_BAD_PARAMETER, Returned by Handler for [PCI_Config] [20080321] ACPI Error (psparse-627): Method parse/execution failed [\_SB_.PCI0.BR10.PES1.RSTM] (Node F9708A80), AE_BAD_PARAMETER ACPI Error (psparse-627): Method parse/execution failed [\_SB_.PCI0.BR10.PES1._INI] (Node F9708948), AE_BAD_PARAMETER AcpiOsDerivePCIID([PCI0] ,[JREG],) Bus:0 Dev:0 Fun:65535 - Pci config status=1001 Derive: Bus:3 Dev:0 Fun:65535 ACPI Exception (evregion-529): AE_BAD_PARAMETER, Returned by Handler for [PCI_Config] [20080321] ACPI Error (psparse-627): Method parse/execution failed [\_SB_.PCI0.BR11.PES2.RSTM] (Node F9708F70), AE_BAD_PARAMETER ACPI Error (psparse-627): Method parse/execution failed [\_SB_.PCI0.BR11.PES2._INI] (Node F9708E38), AE_BAD_PARAMETER ** AcpiInitializeObjects mask:0 Status = 0 Processor [P001] Processor [P002] Status 0x0 0 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND Status Evaluate Processor 0x0 AE_OK Usable:2 Counter:0 CPU id to N:0 ProcId: 0x1 P_BLK: 0x4010 P_BLK len: 0x6 CPU0 Status Evaluate _PCT 0x0 AE_OK Perf control: 0x0 Perf status: 0x0 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND Status Evaluate Processor 0x0 AE_OK Usable:2 Counter:1 CPU id to N:1 ProcId: 0x2 P_BLK: 0x0 P_BLK len: 0x0 CPU1 Status Evaluate _PCT 0x0 AE_OK Perf control: 0x0 Perf status: 0x0 ** AcpiInstall Power Device Status = 0 ACPI Error (evxfevnt-288): Could not enable SleepButton event [20080321] ACPI Warning (evxface-235): Could not enable fixed event 3 [20080321] ** AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE ** AcpiInstall PMTimer Device Status = 0 ** Total use:125792 unuse:16072 count:2415 ** Get GpeHdl Status = 0 - AE_OK Event [_L01] Install GPE0x1 Status 0x0 Event [_L0B] Install GPE0xB Status 0x0 Event [_L10] Install GPE0x10 Status 0x0 Event [_L03] Install GPE0x3 Status 0x0 Event [_L09] Install GPE0x9 Status 0x0 Event [_L0D] Install GPE0xD Status 0x0 Event [_L05] Install GPE0x5 Status 0x0 Event [_L00] Install GPE0x0 Status 0x0 Event [_L15] Install GPE0x15 Status 0x0 Event [_L11] Install GPE0x11 Status 0x0 EndScan GPE Status 0 ===== Info ======== Int Level 9 In Xrupt F96F3ED0 in arg F96F3ED0 Node Name [_GPE] Flags: 0 Reg count 4 GPE0x0 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x1 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0 Status:4020 Enable:4024 EnableWake:29 EnableRun:2 BaseGPENumber:0 GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0 GPE1 Status:4021 Enable:4025 EnableWake:2A EnableRun:0 BaseGPENumber:8 GPE0x10 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x11 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x15 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE2 Status:4022 Enable:4026 EnableWake:23 EnableRun:0 BaseGPENumber:10 GPE3 Status:4023 Enable:4027 EnableWake:0 EnableRun:0 BaseGPENumber:18 ===== Info ======== Int Level 9 In Xrupt F96F3ED0 in arg F96F4140 Node Name [_GPE] Flags: 0 Reg count 8 GPE0 Status:44A0 Enable:44A8 EnableWake:0 EnableRun:0 BaseGPENumber:20 GPE1 Status:44A1 Enable:44A9 EnableWake:0 EnableRun:0 BaseGPENumber:28 GPE2 Status:44A2 Enable:44AA EnableWake:0 EnableRun:0 BaseGPENumber:30 GPE3 Status:44A3 Enable:44AB EnableWake:0 EnableRun:0 BaseGPENumber:38 GPE4 Status:44A4 Enable:44AC EnableWake:0 EnableRun:0 BaseGPENumber:40 GPE5 Status:44A5 Enable:44AD EnableWake:0 EnableRun:0 BaseGPENumber:48 GPE6 Status:44A6 Enable:44AE EnableWake:0 EnableRun:0 BaseGPENumber:50 GPE7 Status:44A7 Enable:44AF EnableWake:0 EnableRun:0 BaseGPENumber:58 =========== Status 0x0 0 PSDFree: at 0xF9C00000 success! APM: PSD find success. PSD Ftable:F9C101D0 Register Notify 1st FFC5F1CE FindPCIDevice Gradd: PSD find success. PSD Ftable:F9C101D0 ******** Event tread *************** APM: Setting suspend state:1