PSD_install options:" /O1" @#netlabs dot org:3.8#@ACPI core PSD Driver. (c) netl abs.org 2005-2008 Build date: Mar 28 2008 15:03:10 MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0 SS Selector fault PSD_INIT ESP=0xFFECCE7C WakeupVector Lin: FFEAD000 WakeupVector Lin: FFEAD000 Phys: 63000 IPIStack:0 s_cpu:0 GetWakeupVector Status = 0 PIC Mask:FFFFDFFB ProcInit CPU0 OemHlpXHandler: ACPI.CFG opened: Size is 2010 bytes OemHlpXHandler: ACPI.CFG read: 2010 bytes OemHlpXHandler: ACPI.CFG closed: 0, Buffer at FD7A04D8 DosTable: A007662 DosTable2: FFDD36A7 intSwitchStack:FFF17B82 AcpiOsInitialize ALLOC size 65536 at 0xF9BE3000 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 AcpiOsCreateLock F9D47470 AcpiOsCreateLock F9D4CE34 AcpiOsPredefinedOverride: "_REV" AcpiOsPredefinedOverride: "_OS_" AcpiOsPredefinedOverride: override AcpiOsPredefinedOverride: "_GL_" AcpiOsPredefinedOverride: "_OSI" AcpiOsPredefinedOverride: override to eCS *** AcpiInitializeSubsystem Status = 0 *** ACPI: RSDP @ 0xFAAF0/0x14 (v0 ACPIAM) ACPI: RSDT @ 0x7FFB0000/0x3C (v1 031408 OEMRSDT 0x20080314 MSFT 0x97) ACPI: FACP @ 0x7FFB0200/0x84 (v2 031408 OEMFACP 0x20080314 MSFT 0x97) ACPI: DSDT @ 0x7FFB0440/0x650F (v1 P0004 P0004000 0x0 INTL 0x20051117) ACPI: FACS @ 0x7FFBE000/0x40 ACPI: APIC @ 0x7FFB0390/0x6C (v1 031408 OEMAPIC 0x20080314 MSFT 0x97) ACPI: MCFG @ 0x7FFB0400/0x3C (v1 031408 OEMMCFG 0x20080314 MSFT 0x97) ACPI: OEMB @ 0x7FFBE040/0x71 (v1 031408 AMI_OEM 0x20080314 MSFT 0x97) ACPI: HPET @ 0x7FFB6950/0x38 (v1 031408 OEMHPET 0x20080314 MSFT 0x97) ACPI: SSDT @ 0x7FFB6990/0x544 (v1 A M I POWERNOW 0x1 AMD 0x1) *** AcpiInitializeTables Status = 0 *** AcpiOsTableOverride Ex:FFE89440 New:FFDEAD84 SIG:[DSDT] tbxface-619 [2] TbLoadNamespace: ACPI Tables successfully acquired *** AcpiLoadTables Status = 0 *** Table [DSDT] Table [FACS] Table [FACP] Table [APIC] Local APIC address: FEE00000h System also has 8259 APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable APIC_PROCESSOR: ProcID 3h LocalApicID 2h - usable APIC_PROCESSOR: ProcID 4h LocalApicID 3h - usable APIC_IO: IO ApicID 4h addr FEC00000h INTI 0 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spe c Trigger by: Bus spec APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Low 1 T rigger by: Level Table [M Table [OEMB] Table [HPET] Table [SSDT] Size of FACDT 244 Type of computer - Unspecified System vector the SCI interrupt is wired to in 8259 mode. 9 System port address of the SMI Command Port 0xB0 The value to write to SMI_CMD to disable SMI 0xE1 The value to write to SMI_CMD to re-enable SMI 0x1E The value to write to SMI_CMD to enter the S4BIOS state 0x0 System port address of the PM1a Event Register Block 800 System port address of the PM1b Event Register Block 0 Number of bytes decoded by PM1a_EVT_BLK(PM1_E System port address of the PM1a Control Register Block 804 System port address of the PM1b Control Register Block 0 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 System port address of the PM2 Control Register Block 8FF Number of bytes decoded by PM2_CNT_BLK 1 System port address of the Power Management Timer Control Register Block 808 Number of bytes decoded by PM_TMR_BLK (=4) 4 System port address of General-Purpose Event 0 Register Block 820 System port address of General-Purpose Event 1 Register B Number of bytes decoded by GPE0_BLK 0x8 Number of bytes decoded by GPE1_BLK 0x0 Offset within the ACPI general-purpose event model where GPE1 based events start 0 GPE enable register: 0: 0: 0: 0 GPE status register: 0: 1: 0: 40 The system does not support a C2 state. 65 The system does not support a C3 state 3E9 The zero-based index of where the processor's duty cycle setting is within the p rocessor's P_CNT register 4 The bit width of the processor's duty cycle setting value in the P_CNT register 3 The RTC CMOS RAM index to the day-of-month alarm value 13 The RTC CMOS RAM index to the century of data value (hundred and thousand year d ecimals) 50 IA-PC Boot Architecture Flags 0x0 Fixed feature flags 1C1A5 The reset register: Type of address space - System I/O Register Bit Width 8 Register Bit Offset 0 Access size 0 Address 3321 The value to write to the RESET_REG port to reset the system 6 ***** Throttl Width 3 Offset 4 evxfevnt-176 [2] Enable: Transition to ACPI mode successful evgpeblk-1111 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x9 AcpiOsInstallIntterrupHandler IRQ9 handler F9D7EE8D evgpeblk-1211 [3] EvInitializeGpeBlock: Found 6 Wake, Enabled 12 Runtime GPEs in this block ************ AcpiEnableSubsystem Status = 0 ************ Scan EC Status = 0 Completing Region/Field/Buffer/Package initialization:.......................... ................................................................................ ................................................... Initialized 11/18 Regions 24/24 Fields 32/32 Buffers 90/93 Packages (886 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:... Executed 3 _INI methods requiring 0 _STA executions (examined 70 objects) ************ AcpiInitializeObjects mask:0 Status = 0 Processor [P001] Processor [P002] Processor [P003] Processor [P004] Status 0x0 0 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND Status Evaluate Processor 0x0 AE_OK Usable:4 Counter:0 CPU id to N:0 ProcId: 0x1 P_BLK: 0x810 P_BLK len: 0x6ions:" /O1 /SMP" CPU0 Status Evaluate _PCT 0x0 AE_OKD Driver. (c) Perf control: 0xC0010062 Perf status: 0x02005-2008 Build da CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND MPDAT Init ACPI rc=0FECCA70 Sel:0 Found bridge "PCI0" Addr:0x180000 BBN is 0 Dev:0x18 Fun:0x0r fault PSD_INIT ESP=0xFFECCE7C Finding:1 bridgespVector Lin: FFEA 0:0.0 Class:600 Hdr:0 Bridge H->0ector Lin: FFEAD000 Phys: 63000 IPISt 0:2.0 Class:604 Hdr:1 Bridge 0->1 GetW 0:18.0 Class:101 Hdr:0 0:19.0 Class:C03 Hdr:80 ProcInit CPU0 0:19.1 Class:C03 Hdr:0: ACPI.CFG opened: Size 0:19.2 Class:C03 Hdr:0 0:19.3 Class:C03 Hdr:0ndler: ACPI.CFG read: 20 0:19.4 Class:C03 Hdr:0 0:19.5 Class:C03 Hdr:0 closed: 0, Buffer at FD 0:20.0 Class:C05 Hdr:80 AcpiOsInit 0:24.0 Class:600 Hdr:80 Bridge H->0 0:24.1 Class:600 Hdr:80 Bridge H->0 AcpiOsCreateLock F9D4C 0:24.2 Class:600 Hdr:80 Bridge H->0finedOverride: "_REV" 0:24.3 Class:600 Hdr:80 Bridge H->0 "_OS_" 0:24.4 Class:600 Hdr:80 Bridge H->0ComStation 1:0.0 Class:300 Hdr:80OsPredefinedOverride: "_ 1:0.1 Class:403 Hdr:80 AcpiOsPredef 2:6.0 Class:200 Hdr:0 PCI Bus scan: 3 PCI buses found.verride to eCS Scan ACPI tree for PCI functionsnitializeSubsystem Status = 0 ** 0:24.0 'PCI0' (F9BE8EB0) ACPI: R 0:0.0 'RS48' (F9BE91A8)PIAM) 0:2.0 'PCE2' 0:9.0 'PCE9' (F9BE9998) ACPI: DSDT 0:10.0 'PCEA' (F9BE9AA8)004 P0004000 0x0 INTL 0x2 0:11.0 'PCEB' (F9BE9BB8) 0:12.0 'PCEC' (F9BE9CC8) ACPI: FACS @ 0x7FFBE000 0:20.0 'SMBS' (F9BE9DD8) ACPI: APIC @ 0x7F 0:20.1 'IDEC' (F9BE9EB0)APIC 0x20080314 MSFT 0x9 0:20.2 'SBAZ' (F9BEA9D8) 0:20.3 'SBRG' (F9BEAB98): MCFG @ 0x7FFB0400/0x3C 0:20.4 'P0PC' (F9BED180)0314 MSFT 0x97) 0:20.5 'AC97' (F9BED290) 0:20.6 'MC97' (F9BED340)FFBE040/0x71 (v1 031408 A 0:19.0 'USB1' (F9BED3F0)97) 0:19.1 'USB2' (F9BED4A0) AC 0:19.2 'USB3' (F9BED550) (v1 031408 OEMHPET 0x20 0:19.3 'USB4' (F9BED600) 0:2.0 class:604 type: 1 Bus 0->1 ACPI: 'PCE2' (F9BE9338) _PRTred 0:20.4 class:604 type: 1 Bus 0->2 ACPI: 'P0PC' (F9BED180) _PRT Table [DSDT] Table [FACS] Table [FACP IRQLinks found:ble [APIC] 0: 'LNKC' (F9BEFC40) P[ 3, 4, 5, 7, 10, 11, 12, 14, 15] <- 1:0.0 0:19.4 0:19.2as 8259 APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable A[] APIC_ 1: 'LNKD' (F9BEFE98) P[ 3, 4, 5, 7, 10, 11, 12, 14, 15] <- 1:0.1 0:19.5 APIC_PROCESSOR: ProcID 3h LocalApicID 2h - usable A[] APIC_XRUPT_OVERRIDE: B 4: 'LNKG' (F9BF05A0) P[ 3, 4, 5, 7, 10, 11, 12, 14, 15] <- 0:18.0 A[] Table [MCFG] 5: 'LNKE' (F9BF00F0) P[] Table [HPET] A[] Size of FACDT 244 6: 'LNKF' (F9BF0348) P[ 9] <- 2:6.0nspecified A[]interrupt is wired to in 8 7: 'LNKH' (F9BF07F8) P[] A[]port address of the SMI Co PCI devices found: 0:0.0 1002:5957 'RS48' System port address of the PM1a C 0:19.4 1002:438B 'USB5' IRQs: PCI:10 PIC:'LNKC': R 10 APIC:18 System port address of the PM1b Control Regis 0:19.5 1002:4386 'EUSB' IRQs: PCI:10 PIC:'LNKD': R 10 APIC:19 MSIumber of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 0:20.0 1002:4385 'SMBS' 0:20.3 1002:438D 'SBRG'808 0:20.4 1002:4384 'P0PC' 0:24.0 1022:1200 'PCI0'd by PM_TMR_BLK (=4) 4 0:24.1 1022:1201 0:24.2 1022:1202 address of Gener 0:24.3 1022:1203 Register Block 8 0:24.4 1022:1204 1:0.0 1002:9501 IRQs: PCI:10 PIC:'LNKC': R 10 APIC:18 MSIose Event 1 Register Block 0 1:0.1 1002:AA18 IRQs: PCI:10 PIC:'LNKD': R 10 APIC:19 MSI Number of bytes decoded by GPE1 2:6.0 10EC:8139 IRQs: PCI:9 PIC:'LNKF': R 9 APIC:21the ACPI general-purpose event model where GPE1 based events Bus detected - 2 ** Create resource, max = 31 ** 0 The zero-based ACPI Warning (evxface-235): Could not enable fixed event 3 [20080321] ************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE of the processor's duty cycle setting value in the P_CNT register ************ AcpiInstall PMTimer Device Status = 0 3 The RTC CMOS RAM index to t ** Total use:222584 unuse:9824 count:3726 ** T Get GpeHdl Status = 0 - AE_OKentury of data value (hundred Event [_L13] year d Install GPE0x13 Status 0x0 Event [_L14] ecim Install GPE0x14 Status 0x0t Architecture F Event [_L1A]size 0 Install GPE0x1A Status 0x0 The value to write to Event [_L1C] port to res Install GPE0x1C Status 0x0 Event [_L1D] ** Install GPE0x1D Status 0x0 Event [_L17]176 [2] Enab Install GPE0x17 Status 0x0successful Event [_L0E] Install GPE0xE Status 0x01111 [4] EvCreateGpeBlock: Event [_L11][_GPE] 4 reg Install GPE0x11 Status 0x0 Event [_L1F] Install GPE0x1F Status 0x0andler IRQ9 handler F9D7EE8 Event [_L18] Install GPE0x18 Status 0x0evgpeblk-1211 [3] EvInitial Event [_L1B]Found 6 Wake Install GPE0x1B Status 0x0 Event [_L03] Install GPE0x3 Statu this b Compl Event [_L0B]Field/Buffer Install GPE0xB Status 0x0....................... EndScan GPE Status 0 ===== Info ======== .. Int Level 9........... In Xrupt F9BD9E58 in arg F9BD9E58..................... Node Name [_GPE] Flags: 0 Reg count 4........... GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xE Flag:0x4 Status - Set 0x0 Enable 0x0 GPE1 Status:821 Enable:825 EnableWake:18 EnableRun:40 BaseGPENumber:8 GPE0x11 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x13 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x14 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x15 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x16 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x17 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE2 Status:822 Enable:826 EnableWake:0 EnableRun:FA BaseGPENumber:10 GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x19 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x1A Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x1B Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x1C Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x1D Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x1F Flag:0x4 Status - Set 0x0 Enable 0x0 GPE3 Status:823 Enable:827 EnableWake:9 EnableRun:B6 BaseGPENumber:18 =========== Status 0x0 0 OemHlpXHandler: ACPI_START_EVENTS 4 OemHlpXHandler: CallACPI16: 4C80909, CallACPI32: F9D55572, ExportTable32: F9D401 CC