OS/2 (C) Copyright IBM Corp. 1987, 2001. All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Internal revision 14.104a_SMP PSD_install options:" /SMP /O1" @#netlabs dot org:3.6a#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Jan 31 2008 13:19:44 MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 New Stack = FFE30000 Size:0x8000 PSD_INIT ESP=0xFFE2FFE0 AcpiOsInitialize ALLOC size 65536 at 0xF9A90000 AcpiOsInitialize MapMem size 4096 at 0xFFE86000 AcpiOsCreateLock 8 AcpiOsCreateLock 0 AcpiOsPredefinedOverride: "_REV" AcpiOsPredefinedOverride: "_OS_" AcpiOsPredefinedOverride: override to eComStation AcpiOsPredefinedOverride: "_GL_" AcpiOsCreateSemaphore: O.K. Handle=0xF9A903F8 M:1 I:0 AcpiOsPredefinedOverride: "_OSI" AcpiOsPredefinedOverride: override to eCS *** AcpiInitializeSubsystem Status = 0 *** ACPI: RSDP @ 0xF01A0/0x14 (v0 TOSHIB) ACPI: RSDT @ 0x7F730000/0x50 (v1 TOSHIB A0054 0x20070816 TASM 0x4010000) ACPI: FACP @ 0x7F73007C/0x84 (v2 TOSHIB A0054 0x20070816 TASM 0x4010000) ACPI: DSDT @ 0x7F730100/0x6546 (v2 TOSHIB A0054 0x20070816 MSFT 0x3000000) ACPI: FACS @ 0xEEE00/0x40 ACPI: SSDT @ 0x7F736646/0x506 (v2 TOSHIB A0054 0x20061102 MSFT 0x3000000) ACPI: BOOT @ 0x7F730054/0x28 (v1 TOSHIB A0054 0x20070816 TASM 0x4010000) ACPI: APIC @ 0x7F736FE2/0x68 (v1 TOSHIB A0054 0x20070816 TASM 0x4010000) ACPI: MCFG @ 0x7F73704A/0x3C (v1 TOSHIB A0054 0x20070816 TASM 0x4010000) ACPI: HPET @ 0x7F7370BA/0x38 (v1 TOSHIB A0054 0x20070816 TASM 0x4010000) ACPI: TCPA @ 0x7F737268/0x32 (v2 TOSHIB A0054 0x20070816 TASM 0x4010000) ACPI: SLIC @ 0x7F7370F2/0x176 (v1 TOSHIB A0054 0x20070816 TASM 0x4010000) ACPI: SSDT @ 0x7F737D39/0x5E1 (v2 TOSHIB A0054 0x20061220 MSFT 0x3000000) ACPI: SSDT @ 0x7F73729A/0x76 (v2 TOSHIB A0054 0x20051021 MSFT 0x3000000) ACPI: SSDT @ 0x7F737310/0xA29 (v2 TOSHIB A0054 0x20061226 MSFT 0x3000000) *** AcpiInitializeTables Status = 0 *** AcpiOsTableOverride Ex:FFC6C100 New:FFE2FFAC SIG:[DSDT] AcpiOsCreateSemaphore: O.K. Handle=0xF9A827C0 M:FFFFFFFF I:0 tbxface-619 [2] TbLoadNamespace: ACPI Tables successfully acquired *** AcpiLoadTables Status = 0 *** Table [DSDT] Table [FACS] Table [FACP] Table [SSDT] Table [BOOT] Table [APIC] Local APIC address: FEE00000h System also has 8259 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable APIC_IO: IO ApicID 1h addr FEC00000h INTI 0 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge Table [MCFG] Table [HPET] Table [TCPA] Table [SLIC] Table [SSDT] Table [SSDT] Table [SSDT] Size of FACDT 244 Type of computer - Unspecified System vector the SCI interrupt is wired to in 8259 mode. 9 System port address of the SMI Command Port 0xB2 The value to write to SMI_CMD to disable SMI 0x71 The value to write to SMI_CMD to re-enable SMI 0x70 The value to write to SMI_CMD to enter the S4BIOS state 0x0 System port address of the PM1a Event Register Block D800 System port address of the PM1b Event Register Block 0 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 System port address of the PM1a Control Register Block D804 System port address of the PM1b Control Register Block 0 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 System port address of the PM2 Control Register Block D820 Number of bytes decoded by PM2_CNT_BLK 1 System port address of the Power Management Timer Control Register Block D808 Number of bytes decoded by PM_TMR_BLK (=4) 4 System port address of General-Purpose Event 0 Register Block D828 System port address of General-Purpose Event 1 Register Block 0 Number of bytes decoded by GPE0_BLK 0x8 Number of bytes decoded by GPE1_BLK 0x0 Offset within the ACPI general-purpose event model where GPE1 based events start 0 GPE enable register: 0: 0: 0: 0 GPE status register: 0: 80: C1: 2D The system does not support a C2 state. 7FFF The system does not support a C3 state 7FFF The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 The RTC CMOS RAM index to the day-of-month alarm value 13 The RTC CMOS RAM index to the month of year alarm value 126 IA-PC Boot Architecture Flags 0x0 Fixed feature flags 84A5 The reset register: Type of address space - System I/O Register Bit Width 8 Register Bit Offset 0 Access size 0 Address 178 The value to write to the RESET_REG port to reset the system FE ***** Throttl Width 0 Offset 1 evxfevnt-176 [2] Enable: Transition to ACPI mode successful evgpeblk-1111 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x9 AcpiOsInstallIntterrupHandler IRQ9 handler F9ACE9ED evgpeblk-1211 [3] EvInitializeGpeBlock: Found 7 Wake, Enabled 5 Runtime GPEs in this block ************ AcpiEnableSubsystem Status = 0 AcpiOsDerivePCIID([PCI0] ,[ICH3],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0 AcpiOsDerivePCIID([PCI0] ,[PEXB],) Bus:0 Dev:28 Fun:1 - Derive: Bus:0 Dev:28 Fun:1 ************ Scan EC Status = 0 Completing Region/Field/Buffer/Package initialization:......................AcpiOsDerivePCIID([PCI0] ,[IGDR],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 ....................... Initialized 15/19 Regions 0/0 Fields 11/11 Buffers 19/32 Packages (951 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:AcpiOsDerivePCIID([PCI0] ,[IGDP],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 . Executed 1 _INI methods requiring 0 _STA executions (examined 76 objects) ************ AcpiInitializeObjects mask:0 Status = 0 Processor [CPU0] Processor [CPU1] Status 0x0 0 ************ AcpiInstallNotifyHandler System Status = 0 ************ AcpiInstallNotifyHandler Device Status = 0 Init ACPI rc=0 APIC0 phys FEC00000 lin: FFE45000 APIC ID 0 (170020) Ver 20 MaxIO entry 0x17 (170020) Arbitration ID 0 set to (170020) 0 Id (1000000) 1 Set 24 lines from IRQ0 WakeupVector Lin: FFE44000 WakeupVector Lin: FFE44000 Phys: 6B000 IPIStack:FFE31000 s_cpu:0 GetWakeupVector Status = 0 PIC Mask:FFFFDFFB PSD_GET_NUM_OF_PROCS - has 2 CPU ProcInit CPU0 LApic ID:0x0: ver 0x50014 Max LVT=6 ACPI Error (dsopcode-398): No pointer back to NS node in buffer obj F9A909F0 [20080123] ACPI Error (psparse-627): Method parse/execution failed [\_PR_.CPU0._PDC] (Node F9A86390), AE_AML_INTERNAL Status Evaluate Processor PDC 0x3011 AE_AML_INTERNAL Status Evaluate Processor 0x0 AE_OK Usable:2 Counter:0 CPU id to N:0 ProcId: 0x0 P_BLK: 0xD810 P_BLK len: 0x6 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND End init CPU0 rc:0 StartProcessor: CPU1 id 1 StartProcessor: Warm Vector:18000018, BootCode.Lin:0xFFE44000, BootCode.Phys:0x6B000 StartProcessor 1 id:1 LAPICid:1 Wait INI App Proc Send SIPI1 StartProcessor success SIPI1 ProcInit CPU1 LApic ID:0x1000000: ver 0x50014 Max LVT=6 End Startup code Set HLT duration as IOdelay:0x3CA ACPI Error (dsopcode-398): No pointer back to NS node in buffer obj F9A909F0 [20080123] ACPI Error (psparse-627): Method parse/execution failed [\_PR_.CPU1._PDC] (Node F9A865F8), AE_AML_INTERNAL Status Evaluate Processor PDC 0x3011 AE_AML_INTERNAL Status Evaluate Processor 0x0 AE_OK Usable:2 Counter:1 CPU id to N:1 ProcId: 0x1 P_BLK: 0xD810 P_BLK len: 0x6 CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND End init CPU1 rc:0 UNMASK PIC IRQ8 mask 0xFFFFDEFB Real:FFEB7CAC Symbols linked (screen01) PSDFree: at 0xF9C00000 success! OemHlpXHandler: ACPI.CFG opened: Size is 2010 bytes OemHlpXHandler: ACPI.CFG read: 2010 bytes OemHlpXHandler: ACPI.CFG closed: 0, Buffer at FD3923EC Finding:0 bridges 0:0.0 Class:600 Hdr:0 Bridge H->0 0:2.0 Class:300 Hdr:80 0:2.1 Class:380 Hdr:80 0:25.0 Class:200 Hdr:0 0:26.0 Class:C03 Hdr:80 0:26.1 Class:C03 Hdr:0 0:26.7 Class:C03 Hdr:0 0:27.0 Class:403 Hdr:0 0:28.0 Class:604 Hdr:81 Bridge 0->1 0:28.1 Class:604 Hdr:81 Bridge 0->2..3 0:28.2 Class:604 Hdr:81 Bridge 0->4 0:29.0 Class:C03 Hdr:80 0:29.1 Class:C03 Hdr:0 0:29.2 Class:C03 Hdr:0 0:29.7 Class:C03 Hdr:0 0:30.0 Class:604 Hdr:1 Bridge 0->5..6 0:31.0 Class:601 Hdr:80 0:31.1 Class:101 Hdr:0 0:31.2 Class:106 Hdr:0 1:0.0 Class:280 Hdr:0 5:11.0 Class:607 Hdr:82 Bridge 5->6 5:11.2 Class:180 Hdr:80 5:11.3 Class:805 Hdr:80 PCI Bus scan: 7 PCI buses found. Scan ACPI tree for PCI functions 0:0.0 'PCI0' (F9A94B80) 0:30.0 'PCIB' (F9A94E40) 5:11.0 'CRD0' (F9A95240) 5:11.3 'SDC_' (F9A954A8) 5:11.1 'IEEE' (F9A95558) 0:31.0 'FNC0' (F9A95660) 0:31.1 'FNC1' (F9A97F10) 0:31.2 'FNC2' (F9A97FC0) 0:2.0 'VGA_' (F9A98070) 0:29.0 'USB1' (F9A99D58) 0:29.1 'USB2' (F9A99FC0) 0:29.2 'USB3' (F9A9A168) 0:26.0 'USB4' (F9A9A460) 0:26.1 'USB5' (F9A9A7A0) 0:29.7 'EHC1' (F9A9A900) 0:26.7 'EHC2' (F9A9ABB0) 0:27.0 'AZAL' (F9A9E718) 0:28.0 'MPEX' (F9A9E9C0) 1:0.0 'WLAN' (F9A9EC70) 0:28.1 'EXCB' (F9A9ECC0) 2:0.0 'EXCD' (F9A9F070) 0:28.2 'PEX3' (F9A9F1A8) 0:25.0 'LAN_' (F9A9F458) Bridges found: 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9A94B80) _PRT 0:28.0 class:604 type: 1 Bus 0->1 ACPI: 'MPEX' (F9A9E9C0) _PRT 0:28.1 class:604 type: 1 Bus 0->2 ACPI: 'EXCB' (F9A9ECC0) _PRT 0:28.2 class:604 type: 1 Bus 0->4 ACPI: 'PEX3' (F9A9F1A8) _PRT 0:30.0 class:604 type: 1 Bus 0->5 ACPI: 'PCIB' (F9A94E40) _PRT 5:11.0 class:607 type: 2 Bus 5->6 ACPI: 'CRD0' (F9A95240) IRQLinks found: 0: 'LNKA' (F9A90CA0) P[*10] <- 1:0.0 0:26.0 0:2.0 A[] 1: 'LNKE' (F9A916D8) P[ 3, 4, 5, 6, 7,*11] <- 5:11.0 0:25.0 A[] 2: 'LNKB' (F9A90FD0) P[ 3, 4, 5, 6, 7,*11] <- 0:26.1 A[] 3: 'LNKC' (F9A91228) P[ 3, 4, 5, 6, 7,*11] <- 0:29.2 0:26.7 A[] 4: 'LNKG' (F9A91B88) P[ 3, 4, 5, 6, 7,*11] <- 0:27.0 A[] 5: 'LNKH' (F9A91DE0) P[ 3, 4, 5, 6, 7,*11] <- 5:11.3 5:11.2 0:29.7 0:29.0 A[] 6: 'LNKD' (F9A91480) P[ 3, 4, 5, 6, 7,*11] <- 0:31.2 0:31.1 0:29.1 A[] 7: 'LNKF' (F9A91930) P[] A[] PCI devices found: 0:0.0 8086:2A00 'PCI0' 0:2.0 8086:2A02 'VGA_' IRQs: PCI:10 PIC:'LNKA':10 APIC:16 MSI 0:2.1 8086:2A03 0:25.0 8086:104D 'LAN_' IRQs: PCI:11 PIC:'LNKE':11 APIC:20 MSI 0:26.0 8086:2834 'USB4' IRQs: PCI:10 PIC:'LNKA':10 APIC:16 0:26.1 8086:2835 'USB5' IRQs: PCI:0 PIC:'LNKB':11 APIC:17 0:26.7 8086:283A 'EHC2' IRQs: PCI:11 PIC:'LNKC':11 APIC:18 0:27.0 8086:284B 'AZAL' IRQs: PCI:0 PIC:'LNKG':11 APIC:22 MSI 0:28.0 8086:283F 'MPEX' 0:28.1 8086:2841 'EXCB' 0:28.2 8086:2843 'PEX3' 0:29.0 8086:2830 'USB1' IRQs: PCI:11 PIC:'LNKH':11 APIC:23 0:29.1 8086:2831 'USB2' IRQs: PCI:11 PIC:'LNKD':11 APIC:19 0:29.2 8086:2832 'USB3' IRQs: PCI:11 PIC:'LNKC':11 APIC:18 0:29.7 8086:2836 'EHC1' IRQs: PCI:11 PIC:'LNKH':11 APIC:23 0:30.0 8086:2448 'PCIB' 0:31.0 8086:2815 'FNC0' 0:31.1 8086:2850 'FNC1' IRQs: PCI:11 PIC:'LNKD':11 APIC:19 0:31.2 8086:2829 'FNC2' IRQs: PCI:11 PIC:'LNKD':11 APIC:19 MSI 1:0.0 8086:4229 'WLAN' IRQs: PCI:10 PIC:'LNKA':10 APIC:16 MSI 5:11.0 104C:8039 'CRD0' IRQs: PCI:0 PIC:'LNKE':11 APIC:20 5:11.2 104C:803B IRQs: PCI:0 PIC:'LNKH':11 APIC:23 5:11.3 104C:803C 'SDC_' IRQs: PCI:0 PIC:'LNKH':11 APIC:23 Bus detected - 6 UNMASK PIC IRQ9 mask 0xFFFFDCFB Real:FFEB7CAC ** Create resource, max = 31 ** OemHlpXHandler: ACPI_START_EVENTS 3 ************ AcpiInstall Power Device Status = 0 ACPI Error (evxfevnt-288): Could not enable SleepButton event [20080123] ACPI Warning (evxface-235): Could not enable fixed event 3 [20080123] ************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE ************ AcpiInstall PMTimer Device Status = 0 ** Total use:152120 unuse:13088 count:2524 ** Get GpeHdl Status = 0 - AE_OK Event [_L01] Install GPE0x1 Status 0x0 Event [_L03] Install GPE0x3 Status 0x0 Event [_L04] Install GPE0x4 Status 0x0 Event [_L05] Install GPE0x5 Status 0x0 Event [_L08] Install GPE0x8 Status 0x0 Event [_L09] Install GPE0x9 Status 0x0 Event [_L0B] Install GPE0xB Status 0x0 Event [_L0C] Install GPE0xC Status 0x0 Event [_L0D] Install GPE0xD Status 0x0 Event [_L0E] Install GPE0xE Status 0x0 Event [_L11] Install GPE0x11 Status 0x0 Event [_L06] Install GPE0x6 Status 0x0 EndScan GPE Status 0 ===== Info ======== Int Level 9 In Xrupt F9A8E708 in arg F9A8E708 Node Name [_GPE] Flags: 0 Reg count 4 GPE0x1 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x4 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x5 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0x6 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0 Status:D828 Enable:D82C EnableWake:8 EnableRun:72 BaseGPENumber:0 GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xB Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0 GPE1 Status:D829 Enable:D82D EnableWake:73 EnableRun:8 BaseGPENumber:8 GPE0x11 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE2 Status:D82A Enable:D82E EnableWake:2 EnableRun:0 BaseGPENumber:10 GPE3 Status:D82B Enable:D82F EnableWake:0 EnableRun:0 BaseGPENumber:18 =========== Status 0x0 0 ************ Leave Sleep Status = 0x5 - AE_NOT_FOUND OemHlpXHandler: ACPI_START_EVENTS 4 OemHlpXHandler: CallACPI16: 49008DF, CallACPI32: F9AA5462, ExportTable32: F9C101CC UNMASK PIC IRQ1 mask 0xFFFFDCF9 Real:FFEB7CAC UNMASK PIC IRQ11 mask 0xFFFFD4F9 Real:FFEB7CAC UNMASK PIC IRQ11 mask 0xFFFFD4F9 Real:FFEB7CAC UNMASK PIC IRQ11 mask 0xFFFFD4F9 Real:FFEB7CAC