AllocIRQMem at 0xFFEA2000 (24576 bytes) @#netlabs dot org:3.5#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Nov 25 2007 02:10:40 MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0 SS Selector fault AcpiOsInitialize ALLOC size 65536 at 0xF9FE3000 AcpiOsInitialize MapMem size 4096 at 0xFFEA1000 AcpiOsCreateLock F9FE31F0 AcpiOsCreateLock F9FE3208 AcpiOsPredefinedOverride: "_REV" AcpiOsPredefinedOverride: "_OS_" AcpiOsPredefinedOverride: override to eComStation AcpiOsPredefinedOverride: "_GL_" AcpiOsCreateSemaphore: O.K. Handle=0xF9FE3428 M:1 I:0 AcpiOsPredefinedOverride: "_OSI" AcpiOsPredefinedOverride: override to eCS *** AcpiInitializeSubsystem Status = 0 *** ACPI: RSDP @ 0xF6BA0/0x14 (v0 PTLTD ) ACPI: RSDT @ 0x3FEFA0AE/0x30 (v1 PTLTD RSDT 0x6040000 LTP 0x0) ACPI: FACP @ 0x3FEFEED4/0x74 (v1 HP WOMBAT 0x6040000 PTL 0x8) ACPI: DSDT @ 0x3FEFA0DE/0x4DF6 (v1 HP Wombat 0x6040000 MSFT 0x100000B) ACPI: FACS @ 0x3FEFFFC0/0x40 ACPI: APIC @ 0x3FEFEF48/0x90 (v1 PTLTD 0x6040000 LTP 0x0) ACPI: BOOT @ 0x3FEFEFD8/0x28 (v1 PTLTD $SBFTBL$ 0x6040000 LTP 0x1) *** AcpiInitializeTables Status = 0 *** AcpiOsTableOverride Ex:FFE890DE New:FFDEADA4 SIG:[DSDT] *** AcpiLoadTables Status = 0 *** Table [DSDT] Table [FACS] Table [FACP] Table [APIC] Local APIC address: FEE00000h System also has 8259 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable APIC_PROCESSOR: ProcID 1h LocalApicID 6h - usable APIC_PROCESSOR: ProcID 2h LocalApicID 1h - not usable APIC_PROCESSOR: ProcID 3h LocalApicID 7h - not usable APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 APIC_IO: IO ApicID 3h addr FEC80000h INTI 24 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: High 0 Trigger by: Edge APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: High Trigger by: Edge APIC_LOCAL_NMI: ProcID 3h LINT1 - Polarity active: High Trigger by: Edge Table [BOOT] Size of FACDT 244 Type of computer - Unspecified System vector the SCI interrupt is wired to in 8259 mode. 9 System port address of the SMI Command Port 0xB2 The value to write to SMI_CMD to disable SMI 0xF0 The value to write to SMI_CMD to re-enable SMI 0xF1 The value to write to SMI_CMD to enter the S4BIOS state 0x0 System port address of the PM1a Event Register Block 1000 System port address of the PM1b Event Register Block 0 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 System port address of the PM1a Control Register Block 1004 System port address of the PM1b Control Register Block 0 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 System port address of the PM2 Control Register Block 0 System port address of the Power Management Timer Control Register Block 1008 Number of bytes decoded by PM_TMR_BLK (=4) 4 System port address of General-Purpose Event 0 Register Block 1028 System port address of General-Purpose Event 1 Register Block 102C Number of bytes decoded by GPE0_BLK 0x4 Number of bytes decoded by GPE1_BLK 0x4 Offset within the ACPI general-purpose event model where GPE1 based events start 10 GPE enable register: 0: 0 GPE status register: 0: 0 The worst-case hardware latency to enter and exit a C2 state 10 us The system does not support a C3 state 3E9 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 The bit width of the processor's duty cycle setting value in the P_CNT register 3 The RTC CMOS RAM index to the day-of-month alarm value 13 The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50 IA-PC Boot Architecture Flags 0x0 Fixed feature flags A1 The reset register: Type of address space - System Memory Register Bit Width 0 Register Bit Offset 0 Access size 0 Address 0 The value to write to the RESET_REG port to reset the system 0 ***** Throttl Width 3 Offset 1 AcpiOsInstallIntterrupHandler IRQ9 handler FA180F09 ************ AcpiEnableSubsystem Status = 0 AcpiOsDerivePCIID([PCI0] ,[PIRX],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0 AcpiOsDerivePCIID([PCI0] ,[PIRY],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0 ************ Scan EC Status = 0 ************ AcpiInitializeObjects mask:0 Status = 0 Processor [CPU0] Processor [CPU1] Status 0x0 0 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND Status Evaluate Processor 0x0 AE_OK Usable:2 Counter:0 CPU id to N:0 ProcId: 0x0 P_BLK: 0x0 P_BLK len: 0x0 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND ************ AcpiInstallNotifyHandler System Status = 0 ************ AcpiInstallNotifyHandler Device Status = 0 Found bridge "PCI0" Addr:0x0 BBN is 0 Dev:0x0 Fun:0x0 Finding:1 bridges 0:0.0 Class:600 Hdr:0 Bridge H->0 0:1.0 Class:604 Hdr:1 Bridge 0->1 0:2.0 Class:604 Hdr:1 Bridge 0->2..3 0:30.0 Class:604 Hdr:1 Bridge 0->4 0:31.0 Class:601 Hdr:80 0:31.1 Class:101 Hdr:0 0:31.2 Class:C03 Hdr:0 0:31.3 Class:C05 Hdr:0 1:0.0 Class:300 Hdr:0 2:31.0 Class:604 Hdr:1 Bridge 2->3 3:0.0 Class:800 Hdr:80 3:4.0 Class:100 Hdr:0 4:6.0 Class:280 Hdr:0 4:9.0 Class:100 Hdr:0 4:10.0 Class:401 Hdr:0 4:13.0 Class:200 Hdr:0 PCI Bus scan: 5 PCI buses found. Scan ACPI tree for PCI functions AcpiOsDerivePCIID([PCI0] ,[REGS],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0 0:0.0 'PCI0' (F9FE3C90) 0:1.0 'AGP_' (F9FE4B28) 0:2.0 'HLB_' (F9FE4C58) 2:31.0 'P64H' (F9FE4CA8) 0:30.0 'SLOT' (F9FE4E00) 0:31.0 'LPC0' (F9FE4ED8) 0:31.1 'IDE_' (F9FEA148) 0:31.2 'USB_' (F9FEA918) 0:31.3 'SMBS' (F9FEAAB0) 0:31.5 'AC97' (F9FEAB00) Bridges found: 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9FE3C90) _PRT 0:1.0 class:604 type: 1 Bus 0->1 ACPI: 'AGP_' (F9FE4B28) _PRT 0:2.0 class:604 type: 1 Bus 0->2 ACPI: 'HLB_' (F9FE4C58) 2:31.0 class:604 type: 1 Bus 2->3 ACPI: 'P64H' (F9FE4CA8) _PRT 0:30.0 class:604 type: 1 Bus 0->4 ACPI: 'SLOT' (F9FE4E00) _PRT IRQLinks found: 0: 'LNKA' (F9FE5468) P[ 3, 4, 5, 6, 7, 9,*10, 11, 14, 15] <- 1:0.0 A[] 1: 'LNKB' (F9FE56B0) P[ 3, 4, 5, 6, 7, 9, 10,*11, 14, 15] <- 4:10.0 0:31.3 A[] 2: 'LNKC' (F9FE58F8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*14, 15] <- 4:6.0 A[] 3: 'LNKD' (F9FE5B40) P[ 3, 4, 6, 7, 9, 10, 11, 14,*15] <- 4:9.0 0:31.2 A[] 4: 'LNKG' (F9FE6218) P[ 3, 4,*5, 6, 7, 9, 10, 11, 14, 15] <- 3:4.0 A[] 5: 'LNKH' (F9FE6460) P[] A[] 6: 'LNKE' (F9FE5D88) P[] A[] 7: 'LNKF' (F9FE5FD0) P[ 3, 4, 5, 6, 7, 9, 10,*11, 14, 15] <- 4:13.0 A[] PCI devices found: 0:0.0 8086:2531 'PCI0' 0:1.0 8086:2532 'AGP_' 0:2.0 8086:2533 'HLB_' 0:30.0 8086:244E 'SLOT' 0:31.0 8086:2440 'LPC0' 0:31.1 8086:244B 'IDE_' 0:31.2 8086:2442 'USB_' IRQs: PCI:15 PIC:'LNKD':15 APIC:19 0:31.3 8086:2443 'SMBS' IRQs: PCI:11 PIC:'LNKB':11 APIC:17 1:0.0 102B:2527 IRQs: PCI:10 PIC:'LNKA':10 APIC:16 2:31.0 8086:1360 'P64H' 3:0.0 8086:1161 3:4.0 9005:80 IRQs: PCI:5 PIC:'LNKG':5 APIC:22 4:6.0 1133:E001 IRQs: PCI:14 PIC:'LNKC':14 APIC:18 4:9.0 9004:7178 IRQs: PCI:15 PIC:'LNKD':15 APIC:19 4:10.0 1013:6003 IRQs: PCI:11 PIC:'LNKB':11 APIC:17 4:13.0 8086:1229 IRQs: PCI:11 PIC:'LNKF':11 APIC:21 Bus detected - 4 ************ AcpiInstall Power Device Status = 0 ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320] ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320] ************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE ************ AcpiInstall PMTimer Device Status = 0 ** Total use:157864 unuse:2136 count:2590 ** Get GpeHdl Status = 0 - AE_OK Event [_L03] Install GPE0x3 Status 0x0 Event [_L08] Install GPE0x8 Status 0x0 Event [_L0B] Install GPE0xB Status 0x0 Event [_L18] Install GPE0x18 Status 0x0 Event [_L1D] Install GPE0x1D Status 0x0 EndScan GPE Status 0 ===== Info ======== Int Level 9 In Xrupt F9FEE2E0 in arg F9FEE2E0 Node Name [_GPE] Flags: 0 Reg count 2 GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0 Status:1028 Enable:102A EnableWake:8 EnableRun:0 BaseGPENumber:0 GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 GPE1 Status:1029 Enable:102B EnableWake:9 EnableRun:0 BaseGPENumber:8 ===== Info ======== Int Level 9 In Xrupt F9FEE2E0 in arg F9FEE458 Node Name [_GPE] Flags: 0 Reg count 2 GPE0 Status:102C Enable:102E EnableWake:0 EnableRun:0 BaseGPENumber:10 GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0 GPE1 Status:102D Enable:102F EnableWake:0 EnableRun:0 BaseGPENumber:18 =========== Status 0x0 0 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [PWRB] Value:2 ************ Leave Sleep Status = 0x0 - AE_OK APM: PSD find success. PSD Ftable:FA1401D0 Register Notify 1st FEE251CE ******** Event tread *************** APM: Setting suspend state:1