AllocIRQMem at 0xFFEA4000 (24576 bytes) PSD_install options:" /!NOD" @#netlabs dot org:3.5a#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Nov 16 2007 11:16:29 MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 SS Selector fault PSD_INIT ESP=0xFFECDE70 WakeupVector Lin: FFEAE000 WakeupVector Lin: FFEAE000 Phys: 6E000 IPIStack:0 s_cpu:FFE8E000 GetWakeupVector Status = 0 PIC Mask:FFFFDFFB ProcInit CPU0 OemHlpXHandler: ACPI.CFG opened: Size is 2010 bytes OemHlpXHandler: ACPI.CFG read: 2010 bytes OemHlpXHandler: ACPI.CFG closed: 0, Buffer at FD79C4D8 DosTable: A00765E DosTable2: FFDD46A3 intSwitchStack:FFF18B72 AcpiOsInitialize ALLOC size 65536 at 0xF96C3000 AcpiOsInitialize MapMem size 4096 at 0xFFEA1000 AcpiOsCreateLock F96C31F0 AcpiOsCreateLock F96C3208 AcpiOsPredefinedOverride: "_REV" AcpiOsPredefinedOverride: "_OS_" AcpiOsPredefinedOverride: override to eComStation AcpiOsPredefinedOverride: "_GL_" AcpiOsCreateSemaphore: O.K. Handle=0xF96C3428 M:1 I:0 AcpiOsPredefinedOverride: "_OSI" AcpiOsPredefinedOverride: override to eCS *** AcpiInitializeSubsystem Status = 0 *** ACPI: RSDP @ 0xF6F10/0x14 (v0 GBT ) ACPI: RSDT @ 0x7FEE3040/0x3C (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) ACPI: FACP @ 0x7FEE30C0/0x74 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) ACPI: DSDT @ 0x7FEE3180/0x4A88 (v1 GBT GBTUACPI 0x1000 MSFT 0x100000C) ACPI: FACS @ 0x7FEE0000/0x40 ACPI: HPET @ 0x7FEE7D80/0x38 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x98) ACPI: MCFG @ 0x7FEE7E00/0x3C (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) ACPI: APIC @ 0x7FEE7C80/0x84 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) ACPI: SSDT @ 0x7FEE7E80/0x15C (v1 PmRef Cpu0Ist 0x3000 INTL 0x20040311) ACPI: SSDT @ 0x7FEE8310/0x275 (v1 PmRef CpuPm 0x3000 INTL 0x20040311) *** AcpiInitializeTables Status = 0 *** AcpiOsTableOverride Ex:FFE89180 New:FFDEBD84 SIG:[DSDT] tbxface-619 [2] TbLoadNamespace: ACPI Tables successfully acquired *** AcpiLoadTables Status = 0 *** Table [DSDT] Table [FACS] Table [FACP] Table [HPET] Table [MCFG] Table [APIC] Local APIC address: FEE00000h System also has 8259 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable APIC_PROCESSOR: ProcID 2h LocalApicID 2h - not usable APIC_PROCESSOR: ProcID 3h LocalApicID 3h - not usable APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: Bus spec Trigger by: Bus spec APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: Bus spec Trigger by: Bus spec APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: Bus spec Trigger by: Bus spec APIC_LOCAL_NMI: ProcID 3h LINT1 - Polarity active: Bus spec Trigger by: Bus spec Table [SSDT] Table [SSDT] Size of FACDT 244 Type of computer - Desktop System vector the SCI interrupt is wired to in 8259 mode. 9 System port address of the SMI Command Port 0xB2 The value to write to SMI_CMD to disable SMI 0xA1 The value to write to SMI_CMD to re-enable SMI 0xA0 The value to write to SMI_CMD to enter the S4BIOS state 0x0 The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0x34 System port address of the PM1a Event Register Block 400 System port address of the PM1b Event Register Block 0 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 System port address of the PM1a Control Register Block 404 System port address of the PM1b Control Register Block 0 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 System port address of the PM2 Control Register Block 0 System port address of the Power Management Timer Control Register Block 408 Number of bytes decoded by PM_TMR_BLK (=4) 4 System port address of General-Purpose Event 0 Register Block 420 System port address of General-Purpose Event 1 Register Block 0 Number of bytes decoded by GPE0_BLK 0x10 Number of bytes decoded by GPE1_BLK 0x0 Offset within the ACPI general-purpose event model where GPE1 based events start 0 GPE enable register: 0: 0: 0: 0: 0: 0: 0: 0 GPE status register: 0: 0: 0: 45: 0: 0: 0: 0 The system does not support a C2 state. 65 The system does not support a C3 state 3E9 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 The bit width of the processor's duty cycle setting value in the P_CNT register 3 The RTC CMOS RAM index to the day-of-month alarm value 13 IA-PC Boot Architecture Flags 0x10 Fixed feature flags 84A5 The reset register: Type of address space - System Memory Register Bit Width 0 Register Bit Offset 0 Access size 0 Address 0 The value to write to the RESET_REG port to reset the system 0 ***** Throttl Width 3 Offset 1 evxfevnt-176 [2] Enable: Transition to ACPI mode successful evgpeblk-1105 [4] EvCreateGpeBlock: GPE 0 to 3F [_GPE] 8 regs on int 0x9 AcpiOsInstallIntterrupHandler IRQ9 handler F988DC8D evgpeblk-1205 [3] EvInitializeGpeBlock: Found 10 Wake, Enabled 0 Runtime GPEs in this block ************ AcpiEnableSubsystem Status = 0 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0 ************ Scan EC Status = 0 Completing Region/Field/Buffer/Package initialization:.............................................................................. Initialized 20/25 Regions 11/11 Fields 17/17 Buffers 30/40 Packages (598 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 1 _STA executions (examined 82 objects) ************ AcpiInitializeObjects mask:0 Status = 0 Processor [CPU0] Processor [CPU1] Processor [CPU2] Processor [CPU3] Status 0x0 0 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND Status Evaluate Processor 0x0 AE_OK Usable:2 Counter:0 CPU id to N:0 ProcId: 0x0 P_BLK: 0x410 P_BLK len: 0x6 CPU0 Status Evaluate _PCT 0x0 AE_OK Perf control: 0x880 Perf status: 0x882 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND ************ AcpiInstallNotifyHandler System Status = 0 ************ AcpiInstallNotifyHandler Device Status = 0 Init ACPI rc=0 ** Create resource, max = 31 ** OemHlpXHandler: ACPI_START_EVENTS 3 ************ AcpiInstall Power Device Status = 0 ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320] ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320] ************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE ************ AcpiInstall PMTimer Device Status = 0 ** Total use:112248 unuse:11592 count:2162 ** Get GpeHdl Status = 0 - AE_OK Event [_L08] Install GPE0x8 Status 0x0 Event [_L03] Install GPE0x3 Status 0x0 Event [_L04] Install GPE0x4 Status 0x0 Event [_L0C] Install GPE0xC Status 0x0 Event [_L0E] Install GPE0xE Status 0x0 Event [_L05] Install GPE0x5 Status 0x0 Event [_L20] Install GPE0x20 Status 0x0 Event [_L0D] Install GPE0xD Status 0x0 Event [_L0B] Install GPE0xB Status 0x0 Event [_L09] Install GPE0x9 Status 0x0 EndScan GPE Status 0 ===== Info ======== Int Level 9 In Xrupt F96D1CE0 in arg F96D1CE0 Node Name [_GPE] Flags: 0 Reg count 8 GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0 Status:420 Enable:428 EnableWake:38 EnableRun:0 BaseGPENumber:0 GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0 GPE1 Status:421 Enable:429 EnableWake:7B EnableRun:0 BaseGPENumber:8 GPE2 Status:422 Enable:42A EnableWake:0 EnableRun:0 BaseGPENumber:10 GPE3 Status:423 Enable:42B EnableWake:0 EnableRun:0 BaseGPENumber:18 GPE0x20 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE4 Status:424 Enable:42C EnableWake:1 EnableRun:0 BaseGPENumber:20 GPE5 Status:425 Enable:42D EnableWake:0 EnableRun:0 BaseGPENumber:28 GPE6 Status:426 Enable:42E EnableWake:0 EnableRun:0 BaseGPENumber:30 GPE7 Status:427 Enable:42F EnableWake:0 EnableRun:0 BaseGPENumber:38 =========== Status 0x0 0 ACPI Error (dsmthdat-551): Uninitialized Local[0] at node F96C112C [20070320] AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [PWRB] Value:2 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [USB0] Value:0 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [USB1] Value:0 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [USB2] Value:0 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [USB3] Value:0 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [USB4] Value:0 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [USB5] Value:0 ACPI Error (dsmthdat-551): Uninitialized Local[0] at node F96C112C [20070320] ************ Leave Sleep Status = 0x0 - AE_OK OemHlpXHandler: ACPI_START_EVENTS 4 OemHlpXHandler: CallACPI16: 47808DF, CallACPI32: F9865182, ExportTable32: F98201CC SNP: PSD FUNADDR rc [0] adr:F98201D0 Bus:0 Dev:0 Fnc:0 Class:600 Hdr:0 Bus:0 Dev:1 Fnc:0 Class:604 Hdr:1 Bridge 0->1..1 Bus:0 Dev:26 Fnc:0 Class:C03 Hdr:80 Bus:0 Dev:26 Fnc:1 Class:C03 Hdr:0 Bus:0 Dev:26 Fnc:2 Class:C03 Hdr:0 Bus:0 Dev:26 Fnc:7 Class:C03 Hdr:0 Bus:0 Dev:27 Fnc:0 Class:403 Hdr:0 Bus:0 Dev:28 Fnc:0 Class:604 Hdr:81 Bridge 0->2..2 Bus:0 Dev:28 Fnc:3 Class:604 Hdr:81 Bridge 0->3..3 Bus:0 Dev:28 Fnc:4 Class:604 Hdr:81 Bridge 0->4..4 Bus:0 Dev:29 Fnc:0 Class:C03 Hdr:80 Bus:0 Dev:29 Fnc:1 Class:C03 Hdr:0 Bus:0 Dev:29 Fnc:2 Class:C03 Hdr:0 Bus:0 Dev:29 Fnc:7 Class:C03 Hdr:0 Bus:0 Dev:30 Fnc:0 Class:604 Hdr:1 Bridge 0->5..5 Bus:0 Dev:31 Fnc:0 Class:601 Hdr:80 Bus:0 Dev:31 Fnc:2 Class:101 Hdr:0 Bus:0 Dev:31 Fnc:3 Class:C05 Hdr:0 Bus:0 Dev:31 Fnc:5 Class:101 Hdr:0 Bus:1 Dev:0 Fnc:0 Class:300 Hdr:80 Bus:1 Dev:0 Fnc:1 Class:380 Hdr:0 Error PIN 0x0 Bus:3 Dev:0 Fnc:0 Class:101 Hdr:0 Bus:4 Dev:0 Fnc:0 Class:200 Hdr:0 Bridges found: 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96C5270) _PRT Dev:26 (0x1A) Fnc:0 INTA IRQ's PCI:10 PIC:10 Router:LNKA APIC:16 ACPI:US31 Dev:26 (0x1A) Fnc:1 INTB IRQ's PCI:11 PIC:11 Router:LNKF APIC:21 ACPI:USB4 Dev:26 (0x1A) Fnc:2 INTC IRQ's PCI:9 PIC:9 Router:LNKC APIC:18 ACPI:USB5 Dev:26 (0x1A) Fnc:7 INTC IRQ's PCI:9 PIC:9 Router:LNKC APIC:18 ACPI:USE2 Dev:27 (0x1B) Fnc:0 INTA IRQ's PCI:5 PIC:5 Router:LNK0 APIC:22 ACPI:AZAL Dev:29 (0x1D) Fnc:0 INTA IRQ's PCI:3 PIC:3 Router:LNK1 APIC:23 ACPI:USB0 Dev:29 (0x1D) Fnc:1 INTB IRQ's PCI:11 PIC:11 Router:LNKD APIC:19 ACPI:USB1 Dev:29 (0x1D) Fnc:2 INTC IRQ's PCI:9 PIC:9 Router:LNKC APIC:18 ACPI:USB2 Dev:29 (0x1D) Fnc:7 INTA IRQ's PCI:3 PIC:3 Router:LNK1 APIC:23 ACPI:USBE Dev:31 (0x1F) Fnc:2 INTB IRQ's PCI:0 PIC:11 Router:LNKD APIC:19 ACPI:IDE1 Dev:31 (0x1F) Fnc:3 INTC IRQ's PCI:9 PIC:9 Router:LNKC APIC:18 ACPI:PX43 Dev:31 (0x1F) Fnc:5 INTB IRQ's PCI:11 PIC:11 Router:LNKD APIC:19 ACPI:IDE2 0:1.0 class:604 type: 1 Bus 0->1 Dev:0 (0x0) Fnc:0 INTA IRQ's PCI:10 Dev:0 (0x0) Fnc:1 INTA IRQ's PCI:255 0:28.0 class:604 type: 1 Bus 0->2 ACPI: 'PEX0' (F96C5508) _PRT 0:28.3 class:604 type: 1 Bus 0->3 ACPI: 'PEX3' (F96C5AC8) _PRT Dev:0 (0x0) Fnc:0 INTA IRQ's PCI:11 PIC:11 Router:LNKD APIC:19 0:28.4 class:604 type: 1 Bus 0->4 ACPI: 'PEX4' (F96C5C88) _PRT Dev:0 (0x0) Fnc:0 INTA IRQ's PCI:10 PIC:10 Router:LNKA APIC:16 0:30.0 class:604 type: 1 Bus 0->5 ACPI: 'HUB0' (F96C73B8) _PRT PCI Bus scan: 6 PCI buses found. Sorting by routers: Router: LNKA Current IRQ:10 Possible IRQ: US31 Bus:0 Dev:26 (0x1A) Fnc:0 INTA IRQ's PCI:10 PIC:10 APIC:16 "\" Bus:4 Dev:0 (0x0) Fnc:0 INTA IRQ's PCI:10 PIC:10 APIC:16 Router: LNKF Current IRQ:11 Possible IRQ: USB4 Bus:0 Dev:26 (0x1A) Fnc:1 INTB IRQ's PCI:11 PIC:11 APIC:21 Router: LNKC Current IRQ:9 Possible IRQ: USB5 Bus:0 Dev:26 (0x1A) Fnc:2 INTC IRQ's PCI:9 PIC:9 APIC:18 USE2 Bus:0 Dev:26 (0x1A) Fnc:7 INTC IRQ's PCI:9 PIC:9 APIC:18 USB2 Bus:0 Dev:29 (0x1D) Fnc:2 INTC IRQ's PCI:9 PIC:9 APIC:18 PX43 Bus:0 Dev:31 (0x1F) Fnc:3 INTC IRQ's PCI:9 PIC:9 APIC:18 Router: LNK0 Current IRQ:5 Possible IRQ: AZAL Bus:0 Dev:27 (0x1B) Fnc:0 INTA IRQ's PCI:5 PIC:5 APIC:22 Router: LNK1 Current IRQ:3 Possible IRQ: USB0 Bus:0 Dev:29 (0x1D) Fnc:0 INTA IRQ's PCI:3 PIC:3 APIC:23 USBE Bus:0 Dev:29 (0x1D) Fnc:7 INTA IRQ's PCI:3 PIC:3 APIC:23 Router: LNKD Current IRQ:11 Possible IRQ: USB1 Bus:0 Dev:29 (0x1D) Fnc:1 INTB IRQ's PCI:11 PIC:11 APIC:19 IDE1 Bus:0 Dev:31 (0x1F) Fnc:2 INTB IRQ's PCI:0 PIC:11 APIC:19 IDE2 Bus:0 Dev:31 (0x1F) Fnc:5 INTB IRQ's PCI:11 PIC:11 APIC:19 "\" Bus:3 Dev:0 (0x0) Fnc:0 INTA IRQ's PCI:11 PIC:11 APIC:19 End Scan SNP: SET PCI devices 14 finding FindPCIDevice FindPCIDevice FindPCIDevice Gradd: PSD find success. PSD Ftable:F98201D0 OemHlpXHandler: CMD_INIT_COMPLETE AcpiExecSMPFunction: Unicall AcpiExecSMPFunction: End