AllocIRQMem at 0xFFE8A000 (24576 bytes) PSD_install options:" /PIC /NOD" @#netlabs dot org:3.5#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Nov 25 2007 02:10:40 MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 New Stack = FFD00000 Size:0x8000 AcpiOsInitialize ALLOC size 65536 at 0xF9C40000 AcpiOsInitialize MapMem size 4096 at 0xFFE89000 AcpiOsCreateLock 8 AcpiOsCreateLock 8 AcpiOsPredefinedOverride: "_REV" AcpiOsPredefinedOverride: "_OS_" AcpiOsPredefinedOverride: override to eComStation AcpiOsPredefinedOverride: "_GL_" AcpiOsCreateSemaphore: O.K. Handle=0xF9C403F8 M:1 I:0 AcpiOsPredefinedOverride: "_OSI" AcpiOsPredefinedOverride: override to eCS *** AcpiInitializeSubsystem Status = 0 *** ACPI: RSDP @ 0xFE020/0x14 (v0 INTEL ) ACPI: RSDT @ 0x7FEFD038/0x38 (v1 INTEL D975XBX2 0xAED 0x1000013) ACPI: FACP @ 0x7FEFC000/0x74 (v1 INTEL D975XBX2 0xAED MSFT 0x1000013) ACPI: DSDT @ 0x7FEF8000/0x3F11 (v1 INTEL D975XBX2 0xAED MSFT 0x1000013) ACPI: FACS @ 0x7FEAC000/0x40 ACPI: APIC @ 0x7FEF7000/0x78 (v1 INTEL D975XBX2 0xAED MSFT 0x1000013) ACPI: WDDT @ 0x7FEF6000/0x40 (v1 INTEL D975XBX2 0xAED MSFT 0x1000013) ACPI: MCFG @ 0x7FEF5000/0x3C (v1 INTEL D975XBX2 0xAED MSFT 0x1000013) ACPI: HPET @ 0x7FEF4000/0x38 (v1 INTEL D975XBX2 0xAED MSFT 0x1000013) *** AcpiInitializeTables Status = 0 *** AcpiOsTableOverride Ex:FFE85000 New:FFCFFFC4 SIG:[DSDT] *** AcpiLoadTables Status = 0 *** Table [DSDT] Table [FACS] Table [FACP] Table [APIC] Local APIC address: FEE00000h System also has 8259 APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable APIC_PROCESSOR: ProcID 3h LocalApicID 82h - not usable APIC_PROCESSOR: ProcID 4h LocalApicID 83h - not usable APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: Bus spec Trigger by: Bus spec APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: Bus spec Trigger by: Bus spec Table [WDDT] Table [MCFG] Table [HPET] Size of FACDT 244 Type of computer - Unspecified System vector the SCI interrupt is wired to in 8259 mode. 9 System port address of the SMI Command Port 0xB2 The value to write to SMI_CMD to disable SMI 0xA0 The value to write to SMI_CMD to re-enable SMI 0xA1 The value to write to SMI_CMD to enter the S4BIOS state 0x0 The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0xE5 System port address of the PM1a Event Register Block 400 System port address of the PM1b Event Register Block 0 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 System port address of the PM1a Control Register Block 404 System port address of the PM1b Control Register Block 0 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 System port address of the PM2 Control Register Block 420 Number of bytes decoded by PM2_CNT_BLK 1 System port address of the Power Management Timer Control Register Block 408 Number of bytes decoded by PM_TMR_BLK (=4) 4 System port address of General-Purpose Event 0 Register Block 428 System port address of General-Purpose Event 1 Register Block 0 Number of bytes decoded by GPE0_BLK 0x8 Number of bytes decoded by GPE1_BLK 0x0 Offset within the ACPI general-purpose event model where GPE1 based events start 0 GPE enable register: 0: 0: 0: 0 GPE status register: 0: 0: 83: 9 The system does not support a C2 state. 65 The system does not support a C3 state 3E9 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 The RTC CMOS RAM index to the day-of-month alarm value 13 IA-PC Boot Architecture Flags 0x0 Fixed feature flags A5 The reset register: Type of address space - System Memory Register Bit Width 0 Register Bit Offset 0 Access size 0 Address 0 The value to write to the RESET_REG port to reset the system 0 ***** Throttl Width 0 Offset 1 AcpiOsInstallIntterrupHandler IRQ9 handler FE630F09 ************ AcpiEnableSubsystem Status = 0 AcpiOsDerivePCIID([PCI0] ,[PRR0],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0 AcpiOsDerivePCIID([PCI0] ,[PRR1],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0 AcpiOsDerivePCIID([PCI0] ,[ELR0],) Bus:0 Dev:0 Fun:0 - AcpiOsDerivePci - Dev: [IELK] Evaluate bad status=5 Derive: Bus:0 Dev:31 Fun:0 ************ Scan EC Status = 0 ************ AcpiInitializeObjects mask:0 Status = 0 Processor [CPU0] Processor [CPU1] Processor [CPU2] Processor [CPU3] Status 0x0 0 ************ AcpiInstallNotifyHandler System Status = 0 ************ AcpiInstallNotifyHandler Device Status = 0 PSDFree: at 0xF9C50000 success! Found bridge "PCI0" BBN is absent status:5 Finding:0 bridges 0:0.0 Class:600 Hdr:0 Bridge H->0 0:1.0 Class:604 Hdr:1 Bridge 0->1 0:28.0 Class:604 Hdr:81 Bridge 0->2 0:28.5 Class:604 Hdr:81 Bridge 0->3 0:29.0 Class:C03 Hdr:80 0:29.1 Class:C03 Hdr:0 0:29.2 Class:C03 Hdr:0 0:29.3 Class:C03 Hdr:0 0:29.7 Class:C03 Hdr:0 0:30.0 Class:604 Hdr:1 Bridge 0->4 0:31.0 Class:601 Hdr:80 0:31.1 Class:101 Hdr:0 0:31.3 Class:C05 Hdr:0 1:0.0 Class:300 Hdr:80 1:0.1 Class:380 Hdr:0 3:0.0 Class:200 Hdr:0 4:0.0 Class:104 Hdr:0 4:2.0 Class:100 Hdr:0 PCI Bus scan: 5 PCI buses found. Scan ACPI tree for PCI functions AcpiOsDerivePCIID([PCI0] ,[TMEM],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0 AcpiOsDerivePCIID([PCI0] ,[PAMX],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0 0:0.0 'PCI0' (F9C41A08) 0:30.0 'P32_' (F9C42058) 0:31.0 'LPC_' (F9C42190) 0:28.0 'PEX0' (F9C45B70) 0:28.1 'PEX1' (F9C461D8) 0:28.2 'PEX2' (F9C46730) 0:28.3 'PEX3' (F9C46C88) 0:28.4 'PEX4' (F9C471E0) 0:28.5 'PEX5' (F9C47738) 0:29.0 'UHC1' (F9C47DE0) 0:29.1 'UHC2' (F9C47FD8) 0:29.2 'UHC3' (F9C481D0) 0:29.3 'UHC4' (F9C483C8) 0:29.7 'EHCI' (F9C485C0) 0:30.3 'AC9M' (F9C487B8) 0:27.0 'AZAL' (F9C489B0) 0:31.1 'IDEC' (F9C48BA8) 0:31.2 'IDES' (F9C49538) Bridges found: 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9C41A08) _PRT 0:1.0 class:604 type: 1 Bus 0->1 0:28.0 class:604 type: 1 Bus 0->2 ACPI: 'PEX0' (F9C45B70) _PRT 0:28.5 class:604 type: 1 Bus 0->3 ACPI: 'PEX5' (F9C47738) _PRT 0:30.0 class:604 type: 1 Bus 0->4 ACPI: 'P32_' (F9C42058) _PRT IRQLinks found: 0: 'LNKA' (F9C42418) P[ 3, 4, 5, 7, 9, 10,*11, 12] <- 1:0.0 0:29.3 A[] 1: 'LNKB' (F9C426F0) P[ 3, 4, 5, 7,*9, 10, 11, 12] <- 3:0.0 A[] 2: 'LNKC' (F9C42910) P[ 3, 4, 5, 7,*9, 10, 11, 12] <- 4:2.0 0:31.1 0:29.2 A[] 3: 'LNKD' (F9C42B30) P[ 3, 4, 5, 7, 9, 10,*11, 12] <- 0:31.3 0:29.1 A[] 4: 'LNKF' (F9C42F70) P[ 3, 4, 5, 7, 9,*10, 11, 12] <- 4:0.0 A[] 5: 'LNKH' (F9C433B0) P[ 3, 4, 5, 7, 9,*10, 11, 12] <- 0:29.7 0:29.0 A[] 6: 'LNKG' (F9C43190) P[] A[] 7: 'LNKE' (F9C42D50) P[] A[] PCI devices found: 0:0.0 8086:277C 'PCI0' 0:1.0 8086:277D 0:28.0 8086:27D0 'PEX0' 0:28.5 8086:27E2 'PEX5' 0:29.0 8086:27C8 'UHC1' IRQs: PCI:10 PIC:'LNKH':10 APIC:23 0:29.1 8086:27C9 'UHC2' IRQs: PCI:11 PIC:'LNKD':11 APIC:19 0:29.2 8086:27CA 'UHC3' IRQs: PCI:9 PIC:'LNKC':9 APIC:18 0:29.3 8086:27CB 'UHC4' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 0:29.7 8086:27CC 'EHCI' IRQs: PCI:10 PIC:'LNKH':10 APIC:23 0:30.0 8086:244E 'P32_' 0:31.0 8086:27B0 'LPC_' 0:31.1 8086:27DF 'IDEC' IRQs: PCI:9 PIC:'LNKC':9 APIC:18 0:31.3 8086:27DA IRQs: PCI:11 PIC:'LNKD':11 APIC:19 1:0.0 1002:5B60 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 MSI 1:0.1 1002:5B70 3:0.0 8086:109A IRQs: PCI:9 PIC:'LNKB':9 APIC:17 MSI 4:0.0 101E:1960 IRQs: PCI:10 PIC:'LNKF':10 APIC:21 4:2.0 9004:5078 IRQs: PCI:9 PIC:'LNKC':9 APIC:18 Bus detected - 4 ************ AcpiInstall Power Device Status = 0 ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320] ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320] ************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE ************ AcpiInstall PMTimer Device Status = 0 ** Total use:80048 unuse:4704 count:1386 ** Get GpeHdl Status = 0 - AE_OK Event [_L03] Install GPE0x3 Status 0x0 Event [_L04] Install GPE0x4 Status 0x0 Event [_L05] Install GPE0x5 Status 0x0 Event [_L09] Install GPE0x9 Status 0x0 Event [_L0A] Install GPE0xA Status 0x0 Event [_L0B] Install GPE0xB Status 0x0 Event [_L0C] Install GPE0xC Status 0x0 Event [_L0D] Install GPE0xD Status 0x0 Event [_L0E] Install GPE0xE Status 0x0 Event [_L1D] Install GPE0x1D Status 0x0 EndScan GPE Status 0 ===== Info ======== Int Level 9 In Xrupt F9C4DAA8 in arg F9C4DAA8 Node Name [_GPE] Flags: 0 Reg count 4 GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0 Status:428 Enable:42C EnableWake:38 EnableRun:0 BaseGPENumber:0 GPE0x9 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0xA Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0 GPE1 Status:429 Enable:42D EnableWake:78 EnableRun:6 BaseGPENumber:8 GPE2 Status:42A Enable:42E EnableWake:0 EnableRun:0 BaseGPENumber:10 GPE0x1D Flag:0x2 Status - Set 0x0 Enable 0x0 GPE3 Status:42B Enable:42F EnableWake:20 EnableRun:0 BaseGPENumber:18 =========== Status 0x0 0 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [UHC1] Value:0 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [UHC2] Value:0 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [UHC3] Value:0 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [UHC4] Value:0 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [EHCI] Value:0 ************ Leave Sleep Status = 0x5 - AE_NOT_FOUND FindPCIDevice Need: B:0 D:1F F:1 Finding APIC18 PIC9 Dev: [IDEC]