1 | Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005. |
---|
2 | Loaded Vendor Data : "This is version 573 of this file; 10-10-2005 (D-M-Y)." |
---|
3 | |
---|
4 | PCI BIOS Version 2.10 found! |
---|
5 | Number of PCI Busses : 2 |
---|
6 | PCI Characteristics : Config Mechanism 1 |
---|
7 | |
---|
8 | Searching for PCI Devices using the OEMHLP$ driver |
---|
9 | |
---|
10 | Bus 0 (PCI), Device Number 0, Device Function 0 |
---|
11 | Vendor 1106h VIA Technologies Inc |
---|
12 | Device 0282h K8T880Pro CPU to PCI Bridge |
---|
13 | Command 0106h (Memory Access, BusMaster, System Errors) |
---|
14 | Status 2230h (Has Capabilities List, Supports 66MHz, Received Master Abort, |
---|
15 | Medium Timing) |
---|
16 | Revision 00h, Header Type 80h, Bus Latency Timer 40h |
---|
17 | Self test 00h (Self test not supported) |
---|
18 | PCI Class Bridge, type PCI to HOST |
---|
19 | Subsystem ID 80A31043h Unknown |
---|
20 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
21 | Address 0 is a Memory Address (0-4GiB, Prefetchable) : C8000000h |
---|
22 | New Capabilities List Present: |
---|
23 | AGP Capability, Version 3.0 (AGP 8x and 4x, core register support) |
---|
24 | AGP Speed(s) Supported : 4x 8x |
---|
25 | FW Transfers Supported : Yes |
---|
26 | >4GiB Address Space Supported : No |
---|
27 | Sideband Addressing Supported : Yes |
---|
28 | AGP v3.0 Operation Mode Available : Yes |
---|
29 | Isosynchronous Transactions Supported : No |
---|
30 | Maximum Command Queue Length : 32 bytes |
---|
31 | AGP Speed Selected : 8x |
---|
32 | FW Transfers Enabled : Yes |
---|
33 | >4GiB Address Space Enabled : No |
---|
34 | AGP Enabled : Yes |
---|
35 | Sideband Addressing Enabled : Yes |
---|
36 | AGP v3.0 Operation Mode : Enabled |
---|
37 | Current Command Queue Length : 1 byte |
---|
38 | Power Management Capability, Version 1.1 |
---|
39 | Does not support low power State D1 or D2 |
---|
40 | Does not support PME# signalling |
---|
41 | Current Power State : D0 (Device operational, no power saving) |
---|
42 | HyperTransport Capability |
---|
43 | SubType : Slave/Primary Interface |
---|
44 | Base UnitID : 0 |
---|
45 | UnitID Count : 3 |
---|
46 | HyperTransport Capability |
---|
47 | SubType : Interrupt Discovery & Configuration |
---|
48 | |
---|
49 | Bus 0 (PCI), Device Number 0, Device Function 1 |
---|
50 | Vendor 1106h VIA Technologies Inc |
---|
51 | Device 1282h K8T880Pro CPU to PCI Bridge |
---|
52 | Command 0006h (Memory Access, BusMaster) |
---|
53 | Status 0200h (Medium Timing) |
---|
54 | Revision 00h, Header Type 00h, Bus Latency Timer 00h |
---|
55 | Self test 00h (Self test not supported) |
---|
56 | PCI Class Bridge, type PCI to HOST |
---|
57 | |
---|
58 | Bus 0 (PCI), Device Number 0, Device Function 2 |
---|
59 | Vendor 1106h VIA Technologies Inc |
---|
60 | Device 2282h K8T880Pro CPU to PCI Bridge |
---|
61 | Command 0006h (Memory Access, BusMaster) |
---|
62 | Status 0200h (Medium Timing) |
---|
63 | Revision 00h, Header Type 00h, Bus Latency Timer 00h |
---|
64 | Self test 00h (Self test not supported) |
---|
65 | PCI Class Bridge, type PCI to HOST |
---|
66 | |
---|
67 | Bus 0 (PCI), Device Number 0, Device Function 3 |
---|
68 | Vendor 1106h VIA Technologies Inc |
---|
69 | Device 3282h K8T880Pro CPU to PCI Bridge |
---|
70 | Command 0006h (Memory Access, BusMaster) |
---|
71 | Status 0200h (Medium Timing) |
---|
72 | Revision 00h, Header Type 00h, Bus Latency Timer 00h |
---|
73 | Self test 00h (Self test not supported) |
---|
74 | PCI Class Bridge, type PCI to HOST |
---|
75 | |
---|
76 | Bus 0 (PCI), Device Number 0, Device Function 4 |
---|
77 | Vendor 1106h VIA Technologies Inc |
---|
78 | Device 4282h K8T880Pro CPU to PCI Bridge |
---|
79 | Command 0006h (Memory Access, BusMaster) |
---|
80 | Status 0200h (Medium Timing) |
---|
81 | Revision 00h, Header Type 00h, Bus Latency Timer 00h |
---|
82 | Self test 00h (Self test not supported) |
---|
83 | PCI Class Bridge, type PCI to HOST |
---|
84 | |
---|
85 | Bus 0 (PCI), Device Number 0, Device Function 7 |
---|
86 | Vendor 1106h VIA Technologies Inc |
---|
87 | Device 7282h K8T880Pro CPU to PCI Bridge |
---|
88 | Command 0006h (Memory Access, BusMaster) |
---|
89 | Status 0200h (Medium Timing) |
---|
90 | Revision 00h, Header Type 00h, Bus Latency Timer 00h |
---|
91 | Self test 00h (Self test not supported) |
---|
92 | PCI Class Bridge, type PCI to HOST |
---|
93 | |
---|
94 | Bus 0 (PCI), Device Number 1, Device Function 0 |
---|
95 | Vendor 1106h VIA Technologies Inc |
---|
96 | Device B188h Apollo K8HTB CPU to AGP 2.0/3.0 Bridge |
---|
97 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) |
---|
98 | Status 0230h (Has Capabilities List, Supports 66MHz, Medium Timing) |
---|
99 | Revision 00h, Header Type 01h, Bus Latency Timer 00h |
---|
100 | Self test 00h (Self test not supported) |
---|
101 | PCI Class Bridge, type PCI to PCI |
---|
102 | PCI Bridge Information: |
---|
103 | Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1 |
---|
104 | Secondary Bus Command 000Ah (CSERR forwarded, VGA mapping) |
---|
105 | Secondary Bus Status 2220h (Supports 66MHz, Received Master Abort, |
---|
106 | Medium Timing) |
---|
107 | Secondary Bus Latency 00h |
---|
108 | I/O Port Range Passed to Secondary Bus : E000h..EFFFh (16-bit) |
---|
109 | Memory Range Passed to Secondary Bus : FBD00000h..FBFFFFFFh |
---|
110 | Prefetchable Memory Range Passed to Secondary Bus : D0000000h..FAFFFFFFh |
---|
111 | New Capabilities List Present: |
---|
112 | Power Management Capability, Version 1.1 |
---|
113 | Supports low power State D1 |
---|
114 | Does not support PME# signalling |
---|
115 | Current Power State : D0 (Device operational, no power saving) |
---|
116 | |
---|
117 | Bus 0 (PCI), Device Number 10, Device Function 0 |
---|
118 | Vendor 11ABh Marvell Semiconductor (Was: Galileo Technology Ltd) |
---|
119 | Device 4320h Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller (Copper) |
---|
120 | Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate, |
---|
121 | System Errors) |
---|
122 | Status 02B0h (Has Capabilities List, Supports 66MHz, |
---|
123 | Supports Back-To-Back Trans., Medium Timing) |
---|
124 | Revision 13h, Header Type 00h, Bus Latency Timer 40h |
---|
125 | Minimum Bus Grant 17h, Maximum Bus Latency 1Fh |
---|
126 | Self test 00h (Self test not supported) |
---|
127 | Cache line size 64 Bytes (16 DWords) |
---|
128 | PCI Class Network, type Ethernet |
---|
129 | Subsystem ID 811A1043h Gigabit Ethernet Controller |
---|
130 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
131 | Address 0 is a Memory Address (0-4GiB) : FB900000h |
---|
132 | Address 1 is an I/O Port : 9400h |
---|
133 | System IRQ 17, INT# A |
---|
134 | Expansion ROM of 128 KiB decoded by this card, currently disabled |
---|
135 | New Capabilities List Present: |
---|
136 | Power Management Capability, Version 1.1 |
---|
137 | Supports low power State D1 |
---|
138 | Supports low power State D2 |
---|
139 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold |
---|
140 | PME# signalling is currently disabled |
---|
141 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
142 | Current Power State : D0 (Device operational, no power saving) |
---|
143 | 3800 mW D0 power consume |
---|
144 | 3800 mW D0 power dissipate |
---|
145 | 3800 mW D1 power consume |
---|
146 | 3800 mW D1 power dissipate |
---|
147 | 3800 mW D2 power consume |
---|
148 | 3800 mW D2 power dissipate |
---|
149 | 1200 mW D3 power consume |
---|
150 | 1200 mW D3 power dissipate |
---|
151 | Vital Product Data Capability |
---|
152 | Identifier Yukon Gigabit Ethernet 10/100/1000Base-T Adapter |
---|
153 | Part Number Yukon 88E8001 |
---|
154 | EC Level (Version) Rev. 1.3 |
---|
155 | Manufacturer ID Marvell |
---|
156 | Serial Number AbCdEfG334454 |
---|
157 | Extended Capability 01h 10h CCh 03h |
---|
158 | Checksum/End 5Eh 10*00h |
---|
159 | Remaining RW Area 121*00h |
---|
160 | End Tag |
---|
161 | |
---|
162 | Bus 0 (PCI), Device Number 12, Device Function 0 |
---|
163 | Vendor 4444h Conexant Inc (Was: Globespan, ICompression Inc) |
---|
164 | Device 0016h iTVC16/CX23416 MPEG Codec |
---|
165 | Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors) |
---|
166 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
167 | Revision 01h, Header Type 00h, Bus Latency Timer 40h |
---|
168 | Minimum Bus Grant 80h, Maximum Bus Latency 08h |
---|
169 | Self test 00h (Self test not supported) |
---|
170 | Cache line size 64 Bytes (16 DWords) |
---|
171 | PCI Class Multimedia, type Video |
---|
172 | Subsystem ID 88010070h Amity 2 |
---|
173 | Subsystem Vendor 0070h Hauppauge Computer Works Inc |
---|
174 | Address 0 is a Memory Address (0-4GiB, Prefetchable) : CC000000h |
---|
175 | System IRQ 17, INT# A |
---|
176 | New Capabilities List Present: |
---|
177 | Power Management Capability, Version 1.1 |
---|
178 | Does not support low power State D1 or D2 |
---|
179 | Does not support PME# signalling |
---|
180 | Current Power State : D0 (Device operational, no power saving) |
---|
181 | |
---|
182 | Bus 0 (PCI), Device Number 14, Device Function 0 |
---|
183 | Vendor 11C1h Lucent/Agere Systems (Was: AT&T MicroElectronics) |
---|
184 | Device 0480h Venus WinModem (V90, 56KFlex) |
---|
185 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) |
---|
186 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
187 | Medium Timing) |
---|
188 | Revision 00h, Header Type 00h, Bus Latency Timer 00h |
---|
189 | Minimum Bus Grant FCh, Maximum Bus Latency 0Eh |
---|
190 | Self test 00h (Self test not supported) |
---|
191 | PCI Class Simple Communication, type Other |
---|
192 | Subsystem ID 04801668h 56K V.90 Call Waiting PCI Modem |
---|
193 | Subsystem Vendor 1668h Action Tec Electronics Inc |
---|
194 | Address 0 is a Memory Address (0-4GiB) : FBA00000h |
---|
195 | Address 1 is an I/O Port : A400h |
---|
196 | Address 2 is an I/O Port : A000h |
---|
197 | Address 3 is an I/O Port : 9800h |
---|
198 | CIS can read from device specific configuration space, offset 40h |
---|
199 | System IRQ 19, INT# A |
---|
200 | New Capabilities List Present: |
---|
201 | Power Management Capability, Version 1.1 |
---|
202 | Supports low power State D2 |
---|
203 | Supports PME# signalling from mode(s) D2, D3hot |
---|
204 | PME# signalling is currently disabled |
---|
205 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
206 | Current Power State : D0 (Device operational, no power saving) |
---|
207 | |
---|
208 | Bus 0 (PCI), Device Number 15, Device Function 0 |
---|
209 | Vendor 1106h VIA Technologies Inc |
---|
210 | Device 3149h VIA SATA RAID Controller |
---|
211 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
212 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
213 | Medium Timing) |
---|
214 | Revision 80h, Header Type 80h, Bus Latency Timer 40h |
---|
215 | Self test 00h (Self test not supported) |
---|
216 | PCI Class Storage, type RAID |
---|
217 | Subsystem ID 80ED1043h Unknown |
---|
218 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
219 | Address 0 is an I/O Port : C400h |
---|
220 | Address 1 is an I/O Port : C000h |
---|
221 | Address 2 is an I/O Port : B800h |
---|
222 | Address 3 is an I/O Port : B400h |
---|
223 | Address 4 is an I/O Port : B000h |
---|
224 | Address 5 is an I/O Port : A800h |
---|
225 | System IRQ 20, INT# B |
---|
226 | New Capabilities List Present: |
---|
227 | Power Management Capability, Version 1.1 |
---|
228 | Does not support low power State D1 or D2 |
---|
229 | Does not support PME# signalling |
---|
230 | Current Power State : D0 (Device operational, no power saving) |
---|
231 | |
---|
232 | Bus 0 (PCI), Device Number 15, Device Function 1 |
---|
233 | Vendor 1106h VIA Technologies Inc |
---|
234 | Device 0571h VT82xxxx EIDE Controller (All VIA Chipsets) |
---|
235 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
236 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
237 | Medium Timing) |
---|
238 | Revision 06h, Header Type 00h, Bus Latency Timer 20h |
---|
239 | Self test 00h (Self test not supported) |
---|
240 | PCI Class Storage, type IDE (ATA) |
---|
241 | PCI EIDE Controller Features : |
---|
242 | BusMaster EIDE is supported |
---|
243 | Primary Channel is at I/O Port 01F0h and IRQ 14 |
---|
244 | Secondary Channel is at I/O Port 0170h and IRQ 15 |
---|
245 | Subsystem ID 80ED1043h VT82xxxx EIDE Controller (All VIA Chipsets) (Guess Only!) |
---|
246 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
247 | Address 0 is not present or not configured! |
---|
248 | Address 1 is not present or not configured! |
---|
249 | Address 2 is not present or not configured! |
---|
250 | Address 3 is not present or not configured! |
---|
251 | Address 4 is an I/O Port : FC00h..FC07h |
---|
252 | System IRQ 20, INT# A |
---|
253 | New Capabilities List Present: |
---|
254 | Power Management Capability, Version 1.1 |
---|
255 | Does not support low power State D1 or D2 |
---|
256 | Does not support PME# signalling |
---|
257 | Current Power State : D0 (Device operational, no power saving) |
---|
258 | |
---|
259 | Bus 0 (PCI), Device Number 16, Device Function 0 |
---|
260 | Vendor 1106h VIA Technologies Inc |
---|
261 | Device 3038h VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets) |
---|
262 | Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate) |
---|
263 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
264 | Revision 81h, Header Type 80h, Bus Latency Timer 40h |
---|
265 | Self test 00h (Self test not supported) |
---|
266 | Cache line size 64 Bytes (16 DWords) |
---|
267 | PCI Class Serial, type USB (UHCI) |
---|
268 | Subsystem ID 80ED1043h VT82xxxxx UHCI USB Controller (Guess Only!) |
---|
269 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
270 | Address 0 is not present or not configured! |
---|
271 | Address 1 is not present or not configured! |
---|
272 | Address 2 is not present or not configured! |
---|
273 | Address 3 is not present or not configured! |
---|
274 | Address 4 is an I/O Port : C800h..C813h |
---|
275 | System IRQ 21, INT# A |
---|
276 | New Capabilities List Present: |
---|
277 | Power Management Capability, Version 1.1 |
---|
278 | Supports low power State D1 |
---|
279 | Supports low power State D2 |
---|
280 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold |
---|
281 | PME# signalling is currently disabled |
---|
282 | 3.3v AUX Current required : 375 mA |
---|
283 | Current Power State : D0 (Device operational, no power saving) |
---|
284 | |
---|
285 | Bus 0 (PCI), Device Number 16, Device Function 1 |
---|
286 | Vendor 1106h VIA Technologies Inc |
---|
287 | Device 3038h VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets) |
---|
288 | Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate) |
---|
289 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
290 | Revision 81h, Header Type 80h, Bus Latency Timer 40h |
---|
291 | Self test 00h (Self test not supported) |
---|
292 | Cache line size 64 Bytes (16 DWords) |
---|
293 | PCI Class Serial, type USB (UHCI) |
---|
294 | Subsystem ID 80ED1043h VT82xxxxx UHCI USB Controller (Guess Only!) |
---|
295 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
296 | Address 0 is not present or not configured! |
---|
297 | Address 1 is not present or not configured! |
---|
298 | Address 2 is not present or not configured! |
---|
299 | Address 3 is not present or not configured! |
---|
300 | Address 4 is an I/O Port : D000h..D013h |
---|
301 | System IRQ 21, INT# A |
---|
302 | New Capabilities List Present: |
---|
303 | Power Management Capability, Version 1.1 |
---|
304 | Supports low power State D1 |
---|
305 | Supports low power State D2 |
---|
306 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold |
---|
307 | PME# signalling is currently disabled |
---|
308 | 3.3v AUX Current required : 375 mA |
---|
309 | Current Power State : D0 (Device operational, no power saving) |
---|
310 | |
---|
311 | Bus 0 (PCI), Device Number 16, Device Function 2 |
---|
312 | Vendor 1106h VIA Technologies Inc |
---|
313 | Device 3038h VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets) |
---|
314 | Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate) |
---|
315 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
316 | Revision 81h, Header Type 80h, Bus Latency Timer 40h |
---|
317 | Self test 00h (Self test not supported) |
---|
318 | Cache line size 64 Bytes (16 DWords) |
---|
319 | PCI Class Serial, type USB (UHCI) |
---|
320 | Subsystem ID 80ED1043h VT82xxxxx UHCI USB Controller (Guess Only!) |
---|
321 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
322 | Address 0 is not present or not configured! |
---|
323 | Address 1 is not present or not configured! |
---|
324 | Address 2 is not present or not configured! |
---|
325 | Address 3 is not present or not configured! |
---|
326 | Address 4 is an I/O Port : D400h..D413h |
---|
327 | System IRQ 21, INT# B |
---|
328 | New Capabilities List Present: |
---|
329 | Power Management Capability, Version 1.1 |
---|
330 | Supports low power State D1 |
---|
331 | Supports low power State D2 |
---|
332 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold |
---|
333 | PME# signalling is currently disabled |
---|
334 | 3.3v AUX Current required : 375 mA |
---|
335 | Current Power State : D0 (Device operational, no power saving) |
---|
336 | |
---|
337 | Bus 0 (PCI), Device Number 16, Device Function 4 |
---|
338 | Vendor 1106h VIA Technologies Inc |
---|
339 | Device 3104h VT6202/12 USB 2.0 Enhanced Host Controller |
---|
340 | Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate) |
---|
341 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
342 | Revision 86h, Header Type 80h, Bus Latency Timer 40h |
---|
343 | Self test 00h (Self test not supported) |
---|
344 | Cache line size 64 Bytes (16 DWords) |
---|
345 | PCI Class Serial, type USB 2.0 (EHCI) |
---|
346 | Subsystem ID 80ED1043h VT6202 USB 2.0 Enhanced Host Controller (Guess Only!) |
---|
347 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
348 | Address 0 is a Memory Address (0-4GiB) : FBC00000h..FBC00093h |
---|
349 | System IRQ 21, INT# C |
---|
350 | New Capabilities List Present: |
---|
351 | Power Management Capability, Version 1.1 |
---|
352 | Supports low power State D1 |
---|
353 | Supports low power State D2 |
---|
354 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold |
---|
355 | PME# signalling is currently disabled |
---|
356 | 3.3v AUX Current required : 375 mA |
---|
357 | Current Power State : D0 (Device operational, no power saving) |
---|
358 | |
---|
359 | Bus 0 (PCI), Device Number 17, Device Function 0 |
---|
360 | Vendor 1106h VIA Technologies Inc |
---|
361 | Device 3227h VT8237 PCI to ISA Bridge |
---|
362 | Command 0087h (I/O Access, Memory Access, BusMaster, Wait Cycles) |
---|
363 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
364 | Revision 00h, Header Type 80h, Bus Latency Timer 00h |
---|
365 | Self test 00h (Self test not supported) |
---|
366 | PCI Class Bridge, type PCI to ISA |
---|
367 | Subsystem ID 80ED1043h Unknown |
---|
368 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
369 | New Capabilities List Present: |
---|
370 | Power Management Capability, Version 1.1 |
---|
371 | Does not support low power State D1 or D2 |
---|
372 | Does not support PME# signalling |
---|
373 | Current Power State : D0 (Device operational, no power saving) |
---|
374 | |
---|
375 | Bus 0 (PCI), Device Number 17, Device Function 5 |
---|
376 | Vendor 1106h VIA Technologies Inc |
---|
377 | Device 3059h VT8233/A AC'97 Enhanced Audio Controller |
---|
378 | Command 0001h (I/O Access) |
---|
379 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
380 | Revision 60h, Header Type 00h, Bus Latency Timer 00h |
---|
381 | Self test 00h (Self test not supported) |
---|
382 | PCI Class Multimedia, type Audio |
---|
383 | Subsystem ID 812A1043h Onboard AC'97 Enhanced Audio Controller (Guess Only!) |
---|
384 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
385 | Address 0 is an I/O Port : D800h..D8FFh |
---|
386 | System IRQ 22, INT# C |
---|
387 | New Capabilities List Present: |
---|
388 | Power Management Capability, Version 1.1 |
---|
389 | Supports low power State D1 |
---|
390 | Supports low power State D2 |
---|
391 | Does not support PME# signalling |
---|
392 | Current Power State : D0 (Device operational, no power saving) |
---|
393 | |
---|
394 | Bus 0 (PCI), Device Number 24, Device Function 0 |
---|
395 | Vendor 1022h Advanced Micro Devices (AMD) |
---|
396 | Device 1100h Athlon 64 / Opteron HyperTransport Technology Configuration |
---|
397 | Command 0000h (Bus Access Disabled!!) |
---|
398 | Status 0010h (Has Capabilities List, Fast Timing) |
---|
399 | Revision 00h, Header Type 80h, Bus Latency Timer 00h |
---|
400 | Self test 00h (Self test not supported) |
---|
401 | PCI Class Bridge, type PCI to HOST |
---|
402 | New Capabilities List Present: |
---|
403 | HyperTransport Capability |
---|
404 | SubType : Host/Secondary Interface |
---|
405 | |
---|
406 | Bus 0 (PCI), Device Number 24, Device Function 1 |
---|
407 | Vendor 1022h Advanced Micro Devices (AMD) |
---|
408 | Device 1101h Athlon 64 / Opteron Address Map |
---|
409 | Command 0000h (Bus Access Disabled!!) |
---|
410 | Status 0000h |
---|
411 | Revision 00h, Header Type 80h, Bus Latency Timer 00h |
---|
412 | Self test 00h (Self test not supported) |
---|
413 | PCI Class Bridge, type PCI to HOST |
---|
414 | |
---|
415 | Bus 0 (PCI), Device Number 24, Device Function 2 |
---|
416 | Vendor 1022h Advanced Micro Devices (AMD) |
---|
417 | Device 1102h Athlon 64 / Opteron DRAM Controller |
---|
418 | Command 0000h (Bus Access Disabled!!) |
---|
419 | Status 0000h |
---|
420 | Revision 00h, Header Type 80h, Bus Latency Timer 00h |
---|
421 | Self test 00h (Self test not supported) |
---|
422 | PCI Class Bridge, type PCI to HOST |
---|
423 | |
---|
424 | Bus 0 (PCI), Device Number 24, Device Function 3 |
---|
425 | Vendor 1022h Advanced Micro Devices (AMD) |
---|
426 | Device 1103h Athlon 64 / Opteron Miscellaneous Control |
---|
427 | Command 0000h (Bus Access Disabled!!) |
---|
428 | Status 0000h |
---|
429 | Revision 00h, Header Type 80h, Bus Latency Timer 00h |
---|
430 | Self test 00h (Self test not supported) |
---|
431 | PCI Class Bridge, type PCI to HOST |
---|
432 | |
---|
433 | Bus 1 (AGP), Device Number 0, Device Function 0 |
---|
434 | Vendor 1002h ATI Technologies Inc |
---|
435 | Device 4150h Radeon 9600 Series (V350) |
---|
436 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) |
---|
437 | Status 02B0h (Has Capabilities List, Supports 66MHz, |
---|
438 | Supports Back-To-Back Trans., Medium Timing) |
---|
439 | Revision 00h, Header Type 80h, Bus Latency Timer 40h |
---|
440 | Minimum Bus Grant 08h, Maximum Bus Latency 00h |
---|
441 | Self test 00h (Self test not supported) |
---|
442 | Cache line size 64 Bytes (16 DWords) |
---|
443 | PCI Class Display, type VGA |
---|
444 | Subsystem ID 0200174Bh Sapphire Radeon 9600 Series (Guess Only!) |
---|
445 | Subsystem Vendor 174Bh PC Partner Ltd |
---|
446 | Address 0 is a Memory Address (0-4GiB, Prefetchable) : D0000000h |
---|
447 | Address 1 is an I/O Port : E000h |
---|
448 | Address 2 is a Memory Address (0-4GiB) : FBE00000h |
---|
449 | System IRQ 16, INT# A |
---|
450 | Expansion ROM of 128 KiB decoded by this card, currently disabled |
---|
451 | New Capabilities List Present: |
---|
452 | AGP Capability, Version 3.0 (AGP 8x and 4x, core register support) |
---|
453 | AGP Speed(s) Supported : 4x 8x |
---|
454 | FW Transfers Supported : Yes |
---|
455 | >4GiB Address Space Supported : No |
---|
456 | Sideband Addressing Supported : Yes |
---|
457 | AGP v3.0 Operation Mode Available : Yes |
---|
458 | Isosynchronous Transactions Supported : No |
---|
459 | Maximum Command Queue Length : 256 bytes |
---|
460 | AGP Speed Selected : 8x |
---|
461 | FW Transfers Enabled : Yes |
---|
462 | >4GiB Address Space Enabled : No |
---|
463 | AGP Enabled : Yes |
---|
464 | Sideband Addressing Enabled : Yes |
---|
465 | AGP v3.0 Operation Mode : Enabled |
---|
466 | Current Command Queue Length : 1 byte |
---|
467 | Power Management Capability, Version 1.1 |
---|
468 | Supports low power State D1 |
---|
469 | Supports low power State D2 |
---|
470 | Does not support PME# signalling |
---|
471 | Current Power State : D0 (Device operational, no power saving) |
---|
472 | |
---|
473 | Bus 1 (AGP), Device Number 0, Device Function 1 |
---|
474 | Vendor 1002h ATI Technologies Inc |
---|
475 | Device 4170h Radeon 9600 Series - Secondary |
---|
476 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
477 | Status 02B0h (Has Capabilities List, Supports 66MHz, |
---|
478 | Supports Back-To-Back Trans., Medium Timing) |
---|
479 | Revision 00h, Header Type 00h, Bus Latency Timer 40h |
---|
480 | Minimum Bus Grant 08h, Maximum Bus Latency 00h |
---|
481 | Self test 00h (Self test not supported) |
---|
482 | Cache line size 64 Bytes (16 DWords) |
---|
483 | PCI Class Display, type Other |
---|
484 | Subsystem ID 0201174Bh Sapphire Radeon 9600 Pro - Secondary (Guess Only!) |
---|
485 | Subsystem Vendor 174Bh PC Partner Ltd |
---|
486 | Address 0 is a Memory Address (0-4GiB, Prefetchable) : E0000000h |
---|
487 | Address 1 is a Memory Address (0-4GiB) : FBF00000h |
---|
488 | New Capabilities List Present: |
---|
489 | Power Management Capability, Version 1.1 |
---|
490 | Supports low power State D1 |
---|
491 | Supports low power State D2 |
---|
492 | Does not support PME# signalling |
---|
493 | Current Power State : D0 (Device operational, no power saving) |
---|
494 | |
---|
495 | ROM PCI IRQ routing table Tests.... |
---|
496 | ROM IRQ routing table found at F000h:5980h |
---|
497 | Table Version 1.0 - OK |
---|
498 | Table size 192 bytes - OK |
---|
499 | Table Checksum A4h - OK |
---|
500 | PCI Interrupt Router: VT8237 PCI to ISA Bridge |
---|
501 | IRQ's dedicated to PCI : None |
---|
502 | The ROM PCI IRQ routing table appears to be OK. |
---|
503 | |
---|
504 | IRQ Summary: IRQs 14,15,16,17,19,20,21,22 are used by PCI devices |
---|
505 | Shared IRQs: IRQ 17 is shared by 2 PCI Devices |
---|
506 | IRQ 20 is shared by 2 PCI Devices |
---|
507 | IRQ 21 is shared by 4 PCI Devices |
---|
508 | |
---|
509 | IRQ control is currently managed by the system APIC controller - IRQ info is |
---|
510 | not actual hardware settings... |
---|