Ticket #65: pciNoUSBLegacy.log

File pciNoUSBLegacy.log, 21.5 KB (added by Chuck McKinnis, 17 years ago)
Line 
1Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
2Loaded Vendor Data : "This is version 573 of this file; 10-10-2005 (D-M-Y)."
3
4PCI BIOS Version 2.10 found!
5Number of PCI Busses : 2
6PCI Characteristics : Config Mechanism 1
7
8Searching for PCI Devices using the OEMHLP$ driver
9
10 Bus 0 (PCI), Device Number 0, Device Function 0
11 Vendor 1106h VIA Technologies Inc
12 Device 0282h K8T880Pro CPU to PCI Bridge
13 Command 0106h (Memory Access, BusMaster, System Errors)
14 Status 2230h (Has Capabilities List, Supports 66MHz, Received Master Abort,
15 Medium Timing)
16 Revision 00h, Header Type 80h, Bus Latency Timer 40h
17 Self test 00h (Self test not supported)
18 PCI Class Bridge, type PCI to HOST
19 Subsystem ID 80A31043h Unknown
20 Subsystem Vendor 1043h ASUSTeK Computer Inc
21 Address 0 is a Memory Address (0-4GiB, Prefetchable) : C8000000h
22 New Capabilities List Present:
23 AGP Capability, Version 3.0 (AGP 8x and 4x, core register support)
24 AGP Speed(s) Supported : 4x 8x
25 FW Transfers Supported : Yes
26 >4GiB Address Space Supported : No
27 Sideband Addressing Supported : Yes
28 AGP v3.0 Operation Mode Available : Yes
29 Isosynchronous Transactions Supported : No
30 Maximum Command Queue Length : 32 bytes
31 AGP Speed Selected : 8x
32 FW Transfers Enabled : Yes
33 >4GiB Address Space Enabled : No
34 AGP Enabled : Yes
35 Sideband Addressing Enabled : Yes
36 AGP v3.0 Operation Mode : Enabled
37 Current Command Queue Length : 1 byte
38 Power Management Capability, Version 1.1
39 Does not support low power State D1 or D2
40 Does not support PME# signalling
41 Current Power State : D0 (Device operational, no power saving)
42 HyperTransport Capability
43 SubType : Slave/Primary Interface
44 Base UnitID : 0
45 UnitID Count : 3
46 HyperTransport Capability
47 SubType : Interrupt Discovery & Configuration
48
49 Bus 0 (PCI), Device Number 0, Device Function 1
50 Vendor 1106h VIA Technologies Inc
51 Device 1282h K8T880Pro CPU to PCI Bridge
52 Command 0006h (Memory Access, BusMaster)
53 Status 0200h (Medium Timing)
54 Revision 00h, Header Type 00h, Bus Latency Timer 00h
55 Self test 00h (Self test not supported)
56 PCI Class Bridge, type PCI to HOST
57
58 Bus 0 (PCI), Device Number 0, Device Function 2
59 Vendor 1106h VIA Technologies Inc
60 Device 2282h K8T880Pro CPU to PCI Bridge
61 Command 0006h (Memory Access, BusMaster)
62 Status 0200h (Medium Timing)
63 Revision 00h, Header Type 00h, Bus Latency Timer 00h
64 Self test 00h (Self test not supported)
65 PCI Class Bridge, type PCI to HOST
66
67 Bus 0 (PCI), Device Number 0, Device Function 3
68 Vendor 1106h VIA Technologies Inc
69 Device 3282h K8T880Pro CPU to PCI Bridge
70 Command 0006h (Memory Access, BusMaster)
71 Status 0200h (Medium Timing)
72 Revision 00h, Header Type 00h, Bus Latency Timer 00h
73 Self test 00h (Self test not supported)
74 PCI Class Bridge, type PCI to HOST
75
76 Bus 0 (PCI), Device Number 0, Device Function 4
77 Vendor 1106h VIA Technologies Inc
78 Device 4282h K8T880Pro CPU to PCI Bridge
79 Command 0006h (Memory Access, BusMaster)
80 Status 0200h (Medium Timing)
81 Revision 00h, Header Type 00h, Bus Latency Timer 00h
82 Self test 00h (Self test not supported)
83 PCI Class Bridge, type PCI to HOST
84
85 Bus 0 (PCI), Device Number 0, Device Function 7
86 Vendor 1106h VIA Technologies Inc
87 Device 7282h K8T880Pro CPU to PCI Bridge
88 Command 0006h (Memory Access, BusMaster)
89 Status 0200h (Medium Timing)
90 Revision 00h, Header Type 00h, Bus Latency Timer 00h
91 Self test 00h (Self test not supported)
92 PCI Class Bridge, type PCI to HOST
93
94 Bus 0 (PCI), Device Number 1, Device Function 0
95 Vendor 1106h VIA Technologies Inc
96 Device B188h Apollo K8HTB CPU to AGP 2.0/3.0 Bridge
97 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
98 Status 0230h (Has Capabilities List, Supports 66MHz, Medium Timing)
99 Revision 00h, Header Type 01h, Bus Latency Timer 00h
100 Self test 00h (Self test not supported)
101 PCI Class Bridge, type PCI to PCI
102 PCI Bridge Information:
103 Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
104 Secondary Bus Command 000Ah (CSERR forwarded, VGA mapping)
105 Secondary Bus Status 2220h (Supports 66MHz, Received Master Abort,
106 Medium Timing)
107 Secondary Bus Latency 00h
108 I/O Port Range Passed to Secondary Bus : E000h..EFFFh (16-bit)
109 Memory Range Passed to Secondary Bus : FBD00000h..FBFFFFFFh
110 Prefetchable Memory Range Passed to Secondary Bus : D0000000h..FAFFFFFFh
111 New Capabilities List Present:
112 Power Management Capability, Version 1.1
113 Supports low power State D1
114 Does not support PME# signalling
115 Current Power State : D0 (Device operational, no power saving)
116
117 Bus 0 (PCI), Device Number 10, Device Function 0
118 Vendor 11ABh Marvell Semiconductor (Was: Galileo Technology Ltd)
119 Device 4320h Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller (Copper)
120 Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
121 System Errors)
122 Status 02B0h (Has Capabilities List, Supports 66MHz,
123 Supports Back-To-Back Trans., Medium Timing)
124 Revision 13h, Header Type 00h, Bus Latency Timer 40h
125 Minimum Bus Grant 17h, Maximum Bus Latency 1Fh
126 Self test 00h (Self test not supported)
127 Cache line size 64 Bytes (16 DWords)
128 PCI Class Network, type Ethernet
129 Subsystem ID 811A1043h Gigabit Ethernet Controller
130 Subsystem Vendor 1043h ASUSTeK Computer Inc
131 Address 0 is a Memory Address (0-4GiB) : FB900000h
132 Address 1 is an I/O Port : 9400h
133 System IRQ 17, INT# A
134 Expansion ROM of 128 KiB decoded by this card, currently disabled
135 New Capabilities List Present:
136 Power Management Capability, Version 1.1
137 Supports low power State D1
138 Supports low power State D2
139 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
140 PME# signalling is currently disabled
141 3.3v AUX Current required : 0 mA (Self powered)
142 Current Power State : D0 (Device operational, no power saving)
143 3800 mW D0 power consume
144 3800 mW D0 power dissipate
145 3800 mW D1 power consume
146 3800 mW D1 power dissipate
147 3800 mW D2 power consume
148 3800 mW D2 power dissipate
149 1200 mW D3 power consume
150 1200 mW D3 power dissipate
151 Vital Product Data Capability
152 Identifier Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
153 Part Number Yukon 88E8001
154 EC Level (Version) Rev. 1.3
155 Manufacturer ID Marvell
156 Serial Number AbCdEfG334454
157 Extended Capability 01h 10h CCh 03h
158 Checksum/End 5Eh 10*00h
159 Remaining RW Area 121*00h
160 End Tag
161
162 Bus 0 (PCI), Device Number 12, Device Function 0
163 Vendor 4444h Conexant Inc (Was: Globespan, ICompression Inc)
164 Device 0016h iTVC16/CX23416 MPEG Codec
165 Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors)
166 Status 0210h (Has Capabilities List, Medium Timing)
167 Revision 01h, Header Type 00h, Bus Latency Timer 40h
168 Minimum Bus Grant 80h, Maximum Bus Latency 08h
169 Self test 00h (Self test not supported)
170 Cache line size 64 Bytes (16 DWords)
171 PCI Class Multimedia, type Video
172 Subsystem ID 88010070h Amity 2
173 Subsystem Vendor 0070h Hauppauge Computer Works Inc
174 Address 0 is a Memory Address (0-4GiB, Prefetchable) : CC000000h
175 System IRQ 17, INT# A
176 New Capabilities List Present:
177 Power Management Capability, Version 1.1
178 Does not support low power State D1 or D2
179 Does not support PME# signalling
180 Current Power State : D0 (Device operational, no power saving)
181
182 Bus 0 (PCI), Device Number 14, Device Function 0
183 Vendor 11C1h Lucent/Agere Systems (Was: AT&T MicroElectronics)
184 Device 0480h Venus WinModem (V90, 56KFlex)
185 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
186 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
187 Medium Timing)
188 Revision 00h, Header Type 00h, Bus Latency Timer 00h
189 Minimum Bus Grant FCh, Maximum Bus Latency 0Eh
190 Self test 00h (Self test not supported)
191 PCI Class Simple Communication, type Other
192 Subsystem ID 04801668h 56K V.90 Call Waiting PCI Modem
193 Subsystem Vendor 1668h Action Tec Electronics Inc
194 Address 0 is a Memory Address (0-4GiB) : FBA00000h
195 Address 1 is an I/O Port : A400h
196 Address 2 is an I/O Port : A000h
197 Address 3 is an I/O Port : 9800h
198 CIS can read from device specific configuration space, offset 40h
199 System IRQ 19, INT# A
200 New Capabilities List Present:
201 Power Management Capability, Version 1.1
202 Supports low power State D2
203 Supports PME# signalling from mode(s) D2, D3hot
204 PME# signalling is currently disabled
205 3.3v AUX Current required : 0 mA (Self powered)
206 Current Power State : D0 (Device operational, no power saving)
207
208 Bus 0 (PCI), Device Number 15, Device Function 0
209 Vendor 1106h VIA Technologies Inc
210 Device 3149h VIA SATA RAID Controller
211 Command 0007h (I/O Access, Memory Access, BusMaster)
212 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
213 Medium Timing)
214 Revision 80h, Header Type 80h, Bus Latency Timer 40h
215 Self test 00h (Self test not supported)
216 PCI Class Storage, type RAID
217 Subsystem ID 80ED1043h Unknown
218 Subsystem Vendor 1043h ASUSTeK Computer Inc
219 Address 0 is an I/O Port : C400h
220 Address 1 is an I/O Port : C000h
221 Address 2 is an I/O Port : B800h
222 Address 3 is an I/O Port : B400h
223 Address 4 is an I/O Port : B000h
224 Address 5 is an I/O Port : A800h
225 System IRQ 20, INT# B
226 New Capabilities List Present:
227 Power Management Capability, Version 1.1
228 Does not support low power State D1 or D2
229 Does not support PME# signalling
230 Current Power State : D0 (Device operational, no power saving)
231
232 Bus 0 (PCI), Device Number 15, Device Function 1
233 Vendor 1106h VIA Technologies Inc
234 Device 0571h VT82xxxx EIDE Controller (All VIA Chipsets)
235 Command 0007h (I/O Access, Memory Access, BusMaster)
236 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
237 Medium Timing)
238 Revision 06h, Header Type 00h, Bus Latency Timer 20h
239 Self test 00h (Self test not supported)
240 PCI Class Storage, type IDE (ATA)
241 PCI EIDE Controller Features :
242 BusMaster EIDE is supported
243 Primary Channel is at I/O Port 01F0h and IRQ 14
244 Secondary Channel is at I/O Port 0170h and IRQ 15
245 Subsystem ID 80ED1043h VT82xxxx EIDE Controller (All VIA Chipsets) (Guess Only!)
246 Subsystem Vendor 1043h ASUSTeK Computer Inc
247 Address 0 is not present or not configured!
248 Address 1 is not present or not configured!
249 Address 2 is not present or not configured!
250 Address 3 is not present or not configured!
251 Address 4 is an I/O Port : FC00h..FC07h
252 System IRQ 20, INT# A
253 New Capabilities List Present:
254 Power Management Capability, Version 1.1
255 Does not support low power State D1 or D2
256 Does not support PME# signalling
257 Current Power State : D0 (Device operational, no power saving)
258
259 Bus 0 (PCI), Device Number 16, Device Function 0
260 Vendor 1106h VIA Technologies Inc
261 Device 3038h VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
262 Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate)
263 Status 0210h (Has Capabilities List, Medium Timing)
264 Revision 81h, Header Type 80h, Bus Latency Timer 40h
265 Self test 00h (Self test not supported)
266 Cache line size 64 Bytes (16 DWords)
267 PCI Class Serial, type USB (UHCI)
268 Subsystem ID 80ED1043h VT82xxxxx UHCI USB Controller (Guess Only!)
269 Subsystem Vendor 1043h ASUSTeK Computer Inc
270 Address 0 is not present or not configured!
271 Address 1 is not present or not configured!
272 Address 2 is not present or not configured!
273 Address 3 is not present or not configured!
274 Address 4 is an I/O Port : C800h..C813h
275 System IRQ 21, INT# A
276 New Capabilities List Present:
277 Power Management Capability, Version 1.1
278 Supports low power State D1
279 Supports low power State D2
280 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
281 PME# signalling is currently disabled
282 3.3v AUX Current required : 375 mA
283 Current Power State : D0 (Device operational, no power saving)
284
285 Bus 0 (PCI), Device Number 16, Device Function 1
286 Vendor 1106h VIA Technologies Inc
287 Device 3038h VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
288 Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate)
289 Status 0210h (Has Capabilities List, Medium Timing)
290 Revision 81h, Header Type 80h, Bus Latency Timer 40h
291 Self test 00h (Self test not supported)
292 Cache line size 64 Bytes (16 DWords)
293 PCI Class Serial, type USB (UHCI)
294 Subsystem ID 80ED1043h VT82xxxxx UHCI USB Controller (Guess Only!)
295 Subsystem Vendor 1043h ASUSTeK Computer Inc
296 Address 0 is not present or not configured!
297 Address 1 is not present or not configured!
298 Address 2 is not present or not configured!
299 Address 3 is not present or not configured!
300 Address 4 is an I/O Port : D000h..D013h
301 System IRQ 21, INT# A
302 New Capabilities List Present:
303 Power Management Capability, Version 1.1
304 Supports low power State D1
305 Supports low power State D2
306 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
307 PME# signalling is currently disabled
308 3.3v AUX Current required : 375 mA
309 Current Power State : D0 (Device operational, no power saving)
310
311 Bus 0 (PCI), Device Number 16, Device Function 2
312 Vendor 1106h VIA Technologies Inc
313 Device 3038h VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
314 Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate)
315 Status 0210h (Has Capabilities List, Medium Timing)
316 Revision 81h, Header Type 80h, Bus Latency Timer 40h
317 Self test 00h (Self test not supported)
318 Cache line size 64 Bytes (16 DWords)
319 PCI Class Serial, type USB (UHCI)
320 Subsystem ID 80ED1043h VT82xxxxx UHCI USB Controller (Guess Only!)
321 Subsystem Vendor 1043h ASUSTeK Computer Inc
322 Address 0 is not present or not configured!
323 Address 1 is not present or not configured!
324 Address 2 is not present or not configured!
325 Address 3 is not present or not configured!
326 Address 4 is an I/O Port : D400h..D413h
327 System IRQ 21, INT# B
328 New Capabilities List Present:
329 Power Management Capability, Version 1.1
330 Supports low power State D1
331 Supports low power State D2
332 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
333 PME# signalling is currently disabled
334 3.3v AUX Current required : 375 mA
335 Current Power State : D0 (Device operational, no power saving)
336
337 Bus 0 (PCI), Device Number 16, Device Function 4
338 Vendor 1106h VIA Technologies Inc
339 Device 3104h VT6202/12 USB 2.0 Enhanced Host Controller
340 Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate)
341 Status 0210h (Has Capabilities List, Medium Timing)
342 Revision 86h, Header Type 80h, Bus Latency Timer 40h
343 Self test 00h (Self test not supported)
344 Cache line size 64 Bytes (16 DWords)
345 PCI Class Serial, type USB 2.0 (EHCI)
346 Subsystem ID 80ED1043h VT6202 USB 2.0 Enhanced Host Controller (Guess Only!)
347 Subsystem Vendor 1043h ASUSTeK Computer Inc
348 Address 0 is a Memory Address (0-4GiB) : FBC00000h..FBC00093h
349 System IRQ 21, INT# C
350 New Capabilities List Present:
351 Power Management Capability, Version 1.1
352 Supports low power State D1
353 Supports low power State D2
354 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
355 PME# signalling is currently disabled
356 3.3v AUX Current required : 375 mA
357 Current Power State : D0 (Device operational, no power saving)
358
359 Bus 0 (PCI), Device Number 17, Device Function 0
360 Vendor 1106h VIA Technologies Inc
361 Device 3227h VT8237 PCI to ISA Bridge
362 Command 0087h (I/O Access, Memory Access, BusMaster, Wait Cycles)
363 Status 0210h (Has Capabilities List, Medium Timing)
364 Revision 00h, Header Type 80h, Bus Latency Timer 00h
365 Self test 00h (Self test not supported)
366 PCI Class Bridge, type PCI to ISA
367 Subsystem ID 80ED1043h Unknown
368 Subsystem Vendor 1043h ASUSTeK Computer Inc
369 New Capabilities List Present:
370 Power Management Capability, Version 1.1
371 Does not support low power State D1 or D2
372 Does not support PME# signalling
373 Current Power State : D0 (Device operational, no power saving)
374
375 Bus 0 (PCI), Device Number 17, Device Function 5
376 Vendor 1106h VIA Technologies Inc
377 Device 3059h VT8233/A AC'97 Enhanced Audio Controller
378 Command 0001h (I/O Access)
379 Status 0210h (Has Capabilities List, Medium Timing)
380 Revision 60h, Header Type 00h, Bus Latency Timer 00h
381 Self test 00h (Self test not supported)
382 PCI Class Multimedia, type Audio
383 Subsystem ID 812A1043h Onboard AC'97 Enhanced Audio Controller (Guess Only!)
384 Subsystem Vendor 1043h ASUSTeK Computer Inc
385 Address 0 is an I/O Port : D800h..D8FFh
386 System IRQ 22, INT# C
387 New Capabilities List Present:
388 Power Management Capability, Version 1.1
389 Supports low power State D1
390 Supports low power State D2
391 Does not support PME# signalling
392 Current Power State : D0 (Device operational, no power saving)
393
394 Bus 0 (PCI), Device Number 24, Device Function 0
395 Vendor 1022h Advanced Micro Devices (AMD)
396 Device 1100h Athlon 64 / Opteron HyperTransport Technology Configuration
397 Command 0000h (Bus Access Disabled!!)
398 Status 0010h (Has Capabilities List, Fast Timing)
399 Revision 00h, Header Type 80h, Bus Latency Timer 00h
400 Self test 00h (Self test not supported)
401 PCI Class Bridge, type PCI to HOST
402 New Capabilities List Present:
403 HyperTransport Capability
404 SubType : Host/Secondary Interface
405
406 Bus 0 (PCI), Device Number 24, Device Function 1
407 Vendor 1022h Advanced Micro Devices (AMD)
408 Device 1101h Athlon 64 / Opteron Address Map
409 Command 0000h (Bus Access Disabled!!)
410 Status 0000h
411 Revision 00h, Header Type 80h, Bus Latency Timer 00h
412 Self test 00h (Self test not supported)
413 PCI Class Bridge, type PCI to HOST
414
415 Bus 0 (PCI), Device Number 24, Device Function 2
416 Vendor 1022h Advanced Micro Devices (AMD)
417 Device 1102h Athlon 64 / Opteron DRAM Controller
418 Command 0000h (Bus Access Disabled!!)
419 Status 0000h
420 Revision 00h, Header Type 80h, Bus Latency Timer 00h
421 Self test 00h (Self test not supported)
422 PCI Class Bridge, type PCI to HOST
423
424 Bus 0 (PCI), Device Number 24, Device Function 3
425 Vendor 1022h Advanced Micro Devices (AMD)
426 Device 1103h Athlon 64 / Opteron Miscellaneous Control
427 Command 0000h (Bus Access Disabled!!)
428 Status 0000h
429 Revision 00h, Header Type 80h, Bus Latency Timer 00h
430 Self test 00h (Self test not supported)
431 PCI Class Bridge, type PCI to HOST
432
433 Bus 1 (AGP), Device Number 0, Device Function 0
434 Vendor 1002h ATI Technologies Inc
435 Device 4150h Radeon 9600 Series (V350)
436 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
437 Status 02B0h (Has Capabilities List, Supports 66MHz,
438 Supports Back-To-Back Trans., Medium Timing)
439 Revision 00h, Header Type 80h, Bus Latency Timer 40h
440 Minimum Bus Grant 08h, Maximum Bus Latency 00h
441 Self test 00h (Self test not supported)
442 Cache line size 64 Bytes (16 DWords)
443 PCI Class Display, type VGA
444 Subsystem ID 0200174Bh Sapphire Radeon 9600 Series (Guess Only!)
445 Subsystem Vendor 174Bh PC Partner Ltd
446 Address 0 is a Memory Address (0-4GiB, Prefetchable) : D0000000h
447 Address 1 is an I/O Port : E000h
448 Address 2 is a Memory Address (0-4GiB) : FBE00000h
449 System IRQ 16, INT# A
450 Expansion ROM of 128 KiB decoded by this card, currently disabled
451 New Capabilities List Present:
452 AGP Capability, Version 3.0 (AGP 8x and 4x, core register support)
453 AGP Speed(s) Supported : 4x 8x
454 FW Transfers Supported : Yes
455 >4GiB Address Space Supported : No
456 Sideband Addressing Supported : Yes
457 AGP v3.0 Operation Mode Available : Yes
458 Isosynchronous Transactions Supported : No
459 Maximum Command Queue Length : 256 bytes
460 AGP Speed Selected : 8x
461 FW Transfers Enabled : Yes
462 >4GiB Address Space Enabled : No
463 AGP Enabled : Yes
464 Sideband Addressing Enabled : Yes
465 AGP v3.0 Operation Mode : Enabled
466 Current Command Queue Length : 1 byte
467 Power Management Capability, Version 1.1
468 Supports low power State D1
469 Supports low power State D2
470 Does not support PME# signalling
471 Current Power State : D0 (Device operational, no power saving)
472
473 Bus 1 (AGP), Device Number 0, Device Function 1
474 Vendor 1002h ATI Technologies Inc
475 Device 4170h Radeon 9600 Series - Secondary
476 Command 0007h (I/O Access, Memory Access, BusMaster)
477 Status 02B0h (Has Capabilities List, Supports 66MHz,
478 Supports Back-To-Back Trans., Medium Timing)
479 Revision 00h, Header Type 00h, Bus Latency Timer 40h
480 Minimum Bus Grant 08h, Maximum Bus Latency 00h
481 Self test 00h (Self test not supported)
482 Cache line size 64 Bytes (16 DWords)
483 PCI Class Display, type Other
484 Subsystem ID 0201174Bh Sapphire Radeon 9600 Pro - Secondary (Guess Only!)
485 Subsystem Vendor 174Bh PC Partner Ltd
486 Address 0 is a Memory Address (0-4GiB, Prefetchable) : E0000000h
487 Address 1 is a Memory Address (0-4GiB) : FBF00000h
488 New Capabilities List Present:
489 Power Management Capability, Version 1.1
490 Supports low power State D1
491 Supports low power State D2
492 Does not support PME# signalling
493 Current Power State : D0 (Device operational, no power saving)
494
495ROM PCI IRQ routing table Tests....
496 ROM IRQ routing table found at F000h:5980h
497 Table Version 1.0 - OK
498 Table size 192 bytes - OK
499 Table Checksum A4h - OK
500 PCI Interrupt Router: VT8237 PCI to ISA Bridge
501 IRQ's dedicated to PCI : None
502 The ROM PCI IRQ routing table appears to be OK.
503
504IRQ Summary: IRQs 14,15,16,17,19,20,21,22 are used by PCI devices
505Shared IRQs: IRQ 17 is shared by 2 PCI Devices
506 IRQ 20 is shared by 2 PCI Devices
507 IRQ 21 is shared by 4 PCI Devices
508
509IRQ control is currently managed by the system APIC controller - IRQ info is
510not actual hardware settings...