1 | ; This is the configuration file for AcpiDaemon.exe |
---|
2 | ; this is a comment |
---|
3 | # this is a comment |
---|
4 | % this is a comment |
---|
5 | |
---|
6 | ;############## General Deamon Settings ################################## |
---|
7 | [ACPID] |
---|
8 | ; LogFile: Where to write the log file, full path, default=No log file |
---|
9 | ;LogFile = D:\var\log\acpidaemon.log |
---|
10 | |
---|
11 | ; AcpiLog: Where to write the acpica$ log file, full path, default=don't create |
---|
12 | ;AcpiLog = c:\AcpiCA.log |
---|
13 | |
---|
14 | ; ConfigCheckInterval: Delay in seconds between checking for config file changes, default=10 |
---|
15 | ;ConfigCheckInterval = 10 |
---|
16 | |
---|
17 | ; Print log output to screen or not, default=0 |
---|
18 | ;LogToScreen = 1 |
---|
19 | |
---|
20 | ; What do when the lid closes |
---|
21 | ; none = no action (default) |
---|
22 | ; off = power off |
---|
23 | ; suspend = suspend |
---|
24 | LID = suspend |
---|
25 | |
---|
26 | ; What do to when the Power button is pressed |
---|
27 | ; none = no action (default) |
---|
28 | ; off = power off |
---|
29 | ; suspend = suspend |
---|
30 | PowerButton = Off |
---|
31 | |
---|
32 | ; Save Video for suspend |
---|
33 | ; 0 - don't use this feature |
---|
34 | ; possible 1,3,7,15 (see standard VESA BIOS) |
---|
35 | VBESave = 0 |
---|
36 | |
---|
37 | ; Set the Sleep State for sleep/suspend |
---|
38 | ; S1 - very easy |
---|
39 | ; S2 - easy |
---|
40 | ; S3 - hard |
---|
41 | ; default - S3 |
---|
42 | SleepState = S3 |
---|
43 | |
---|
44 | ;############## APM Emulator Settings #################################### |
---|
45 | [APM] |
---|
46 | ; There are currently no settable APM Emulator settings |
---|
47 | |
---|
48 | ;############## Power Manager Settings ################################### |
---|
49 | [PowerMan] |
---|
50 | |
---|
51 | ; Enable: 1=enabled, 0=disabled, default=0 |
---|
52 | Enable = 1 |
---|
53 | |
---|
54 | ; Verbose: 1=display status messages, 0=silent operation, default=0 |
---|
55 | ;Verbose = 1 |
---|
56 | |
---|
57 | ; MaxTemp is the maximum temperature allowed for the CPU in C, default=85 |
---|
58 | ;MaxTemp = 85 |
---|
59 | |
---|
60 | ; OverTempPower is the power level to use of the CPU temperature is higher than MaxTemp, default=25 |
---|
61 | ;OverTempPower = 25 |
---|
62 | |
---|
63 | ; Scale is the format for displaying temperatures. Can be Celsius or Fahrenheit, default = Celsius |
---|
64 | ;Scale = Celsius |
---|
65 | |
---|
66 | ; MaxPowerAC is the maximum power setting when running on AC, default=100 |
---|
67 | ;MaxPowerAC = 100 |
---|
68 | |
---|
69 | ; MaxPowerBattery is the maximum power setting when running on Battery, default=50 |
---|
70 | ;MaxPowerBattery = 50 |
---|
71 | |
---|
72 | ; MinPower is the minimum power level for energy saving (13 - 100), default=25 |
---|
73 | ;MinPower = 25 |
---|
74 | |
---|
75 | ; IncIfAbove is the CPU load above which CPU power is increased (1-100), default=25 |
---|
76 | ;IncIfAbove = 25 |
---|
77 | |
---|
78 | ; DecIfBelow is the CPU load below which CPU power is decreased (1-100), default=15 |
---|
79 | ;DecIfBelow = 15 |
---|
80 | |
---|
81 | ; IdleCount: Number of CheckIntervals needed to determine system idle, default=10 |
---|
82 | ;IdleCount = 10 |
---|
83 | |
---|
84 | ; CheckInterval: Delay time between checking cpu load and temperature (seconds), default=1 |
---|
85 | ;CheckInterval = 1 |
---|
86 | |
---|
87 | ; PreferredMode: Sets the preferred power management mode at startup. Throttle, Power, or None, default=Throttle |
---|
88 | PreferredMode=None |
---|
89 | |
---|