Ticket #56: pci.log

File pci.log, 16.0 KB (added by David McKenna, 17 years ago)
Line 
1Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
2Loaded Vendor Data : "This is version 623 of this file; 03-01-2007 (D-M-Y)."
3
4PCI BIOS Version 2.10 found!
5Number of PCI Busses : 3
6PCI Characteristics : Config Mechanism 1
7
8Searching for PCI Devices using the OEMHLP$ driver
9
10 Bus 0 (PCI), Device Number 0, Device Function 0
11 Vendor 8086h Intel Corporation
12 Device 2578h 82875P,E7210 Memory Controller Hub
13 Command 0006h (Memory Access, BusMaster)
14 Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
15 Received Master Abort, Fast Timing)
16 Revision 02h, Header Type 00h, Bus Latency Timer 00h
17 Self test 00h (Self test not supported)
18 PCI Class Bridge, type PCI to HOST
19 Subsystem ID 80F61043h Unknown
20 Subsystem Vendor 1043h ASUSTeK Computer Inc
21 Address 0 is a Memory Address (0-4GiB, Prefetchable) : F8000000h
22 New Capabilities List Present:
23 Vendor-Dependant Capability
24 AGP Capability, Version 3.0 (AGP 8x and 4x, core register support)
25 AGP Speed(s) Supported : 4x 8x
26 FW Transfers Supported : Yes
27 >4GiB Address Space Supported : No
28 Sideband Addressing Supported : Yes
29 AGP v3.0 Operation Mode Available : Yes
30 Isosynchronous Transactions Supported : No
31 Maximum Command Queue Length : 32 bytes
32 AGP Speed Selected : 8x
33 FW Transfers Enabled : No
34 >4GiB Address Space Enabled : No
35 AGP Enabled : Yes
36 Sideband Addressing Enabled : Yes
37 AGP v3.0 Operation Mode : Enabled
38 Current Command Queue Length : 1 byte
39
40 Bus 0 (PCI), Device Number 1, Device Function 0
41 Vendor 8086h Intel Corporation
42 Device 2579h 82875P PCI to AGP Bridge
43 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
44 Status 00A0h (Supports 66MHz, Supports Back-To-Back Trans., Fast Timing)
45 Revision 02h, Header Type 01h, Bus Latency Timer 40h
46 Self test 00h (Self test not supported)
47 PCI Class Bridge, type PCI to PCI
48 PCI Bridge Information:
49 Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
50 Secondary Bus Command 0008h (VGA mapping)
51 Secondary Bus Status 22A0h (Supports 66MHz, Supports Back-To-Back Trans.,
52 Received Master Abort, Medium Timing)
53 Secondary Bus Latency 40h
54 I/O Port Range Passed to Secondary Bus : C000h..CFFFh (16-bit)
55 Memory Range Passed to Secondary Bus : FE900000h..FE9FFFFFh
56 Prefetchable Memory Range Passed to Secondary Bus : B7F00000h..F7EFFFFFh
57
58 Bus 0 (PCI), Device Number 29, Device Function 0
59 Vendor 8086h Intel Corporation
60 Device 24D2h 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
61 Command 0005h (I/O Access, BusMaster)
62 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
63 Revision 02h, Header Type 80h, Bus Latency Timer 00h
64 Self test 00h (Self test not supported)
65 PCI Class Serial, type USB (UHCI)
66 Subsystem ID 80A61043h Unknown
67 Subsystem Vendor 1043h ASUSTeK Computer Inc
68 Address 0 is not present or not configured!
69 Address 1 is not present or not configured!
70 Address 2 is not present or not configured!
71 Address 3 is not present or not configured!
72 Address 4 is an I/O Port : EEC0h..EED3h
73 System IRQ 10, INT# A
74
75 Bus 0 (PCI), Device Number 29, Device Function 1
76 Vendor 8086h Intel Corporation
77 Device 24D4h 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
78 Command 0005h (I/O Access, BusMaster)
79 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
80 Revision 02h, Header Type 00h, Bus Latency Timer 00h
81 Self test 00h (Self test not supported)
82 PCI Class Serial, type USB (UHCI)
83 Subsystem ID 80A61043h Unknown
84 Subsystem Vendor 1043h ASUSTeK Computer Inc
85 Address 0 is not present or not configured!
86 Address 1 is not present or not configured!
87 Address 2 is not present or not configured!
88 Address 3 is not present or not configured!
89 Address 4 is an I/O Port : EF00h..EF13h
90 System IRQ 3, INT# B
91
92 Bus 0 (PCI), Device Number 29, Device Function 2
93 Vendor 8086h Intel Corporation
94 Device 24D7h 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
95 Command 0005h (I/O Access, BusMaster)
96 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
97 Revision 02h, Header Type 00h, Bus Latency Timer 00h
98 Self test 00h (Self test not supported)
99 PCI Class Serial, type USB (UHCI)
100 Subsystem ID 80A61043h Unknown
101 Subsystem Vendor 1043h ASUSTeK Computer Inc
102 Address 0 is not present or not configured!
103 Address 1 is not present or not configured!
104 Address 2 is not present or not configured!
105 Address 3 is not present or not configured!
106 Address 4 is an I/O Port : EF20h..EF33h
107 System IRQ 5, INT# C
108
109 Bus 0 (PCI), Device Number 29, Device Function 3
110 Vendor 8086h Intel Corporation
111 Device 24DEh 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
112 Command 0005h (I/O Access, BusMaster)
113 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
114 Revision 02h, Header Type 00h, Bus Latency Timer 00h
115 Self test 00h (Self test not supported)
116 PCI Class Serial, type USB (UHCI)
117 Subsystem ID 80A61043h Unknown
118 Subsystem Vendor 1043h ASUSTeK Computer Inc
119 Address 0 is not present or not configured!
120 Address 1 is not present or not configured!
121 Address 2 is not present or not configured!
122 Address 3 is not present or not configured!
123 Address 4 is an I/O Port : EF40h..EF53h
124 System IRQ 10, INT# A
125
126 Bus 0 (PCI), Device Number 29, Device Function 7
127 Vendor 8086h Intel Corporation
128 Device 24DDh 82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller
129 Command 0106h (Memory Access, BusMaster, System Errors)
130 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
131 Medium Timing)
132 Revision 02h, Header Type 00h, Bus Latency Timer 00h
133 Self test 00h (Self test not supported)
134 PCI Class Serial, type USB 2.0 (EHCI)
135 Subsystem ID 80A61043h Unknown
136 Subsystem Vendor 1043h ASUSTeK Computer Inc
137 Address 0 is a Memory Address (0-4GiB) : FEBFF800h..FEBFF893h
138 System IRQ 11, INT# D
139 New Capabilities List Present:
140 Power Management Capability, Version 1.1
141 Does not support low power State D1 or D2
142 Supports PME# signalling from mode(s) D0, D3hot, D3cold
143 PME# signalling is currently disabled
144 3.3v AUX Current required : 375 mA
145 Current Power State : D0 (Device operational, no power saving)
146 USB 2.0 EHCI Debug Port Capability
147
148 Bus 0 (PCI), Device Number 30, Device Function 0
149 Vendor 8086h Intel Corporation
150 Device 244Eh 82801EB/ER Hub Interface to PCI Bridge (ICH5/ICH5R A2/A3 step)
151 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
152 Status 0080h (Supports Back-To-Back Trans., Fast Timing)
153 Revision C2h, Header Type 01h, Bus Latency Timer 00h
154 Self test 00h (Self test not supported)
155 PCI Class Bridge, type PCI to PCI
156 PCI Bridge Information:
157 Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
158 Secondary Bus Command 0002h (CSERR forwarded)
159 Secondary Bus Status 2280h (Supports Back-To-Back Trans.,
160 Received Master Abort, Medium Timing)
161 Secondary Bus Latency 40h
162 I/O Port Range Passed to Secondary Bus : D000h..DFFFh (16-bit)
163 Memory Range Passed to Secondary Bus : FEA00000h..FEAFFFFFh
164 Prefetchable Memory Range Passed to Secondary Bus : None
165
166 Bus 0 (PCI), Device Number 31, Device Function 0
167 Vendor 8086h Intel Corporation
168 Device 24D0h 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
169 Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles)
170 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
171 Revision 02h, Header Type 80h, Bus Latency Timer 00h
172 Self test 00h (Self test not supported)
173 PCI Class Bridge, type PCI to ISA
174
175 Bus 0 (PCI), Device Number 31, Device Function 1
176 Vendor 8086h Intel Corporation
177 Device 24DBh 82801EB/ER (ICH5/ICH5R) EIDE Controller
178 Command 0007h (I/O Access, Memory Access, BusMaster)
179 Status 0288h (Signalled Interrupt, Supports Back-To-Back Trans.,
180 Medium Timing)
181 Revision 02h, Header Type 00h, Bus Latency Timer 00h
182 Self test 00h (Self test not supported)
183 PCI Class Storage, type IDE (ATA)
184 PCI EIDE Controller Features :
185 BusMaster EIDE is supported
186 Primary Channel is at I/O Port 01F0h and IRQ 14
187 Secondary Channel is at I/O Port 0170h and IRQ 15
188 Subsystem ID 80A61043h Unknown
189 Subsystem Vendor 1043h ASUSTeK Computer Inc
190 Address 0 is an I/O Port : 0000h (unconfigured)
191 Address 1 is an I/O Port : 0000h (unconfigured)
192 Address 2 is an I/O Port : 0000h (unconfigured)
193 Address 3 is an I/O Port : 0000h (unconfigured)
194 Address 4 is an I/O Port : FC00h..FC07h
195 System IRQ (disabled), INT# A
196
197 Bus 0 (PCI), Device Number 31, Device Function 2
198 Vendor 8086h Intel Corporation
199 Device 24D1h 82801EB (ICH5) SATA Controller
200 Command 0005h (I/O Access, BusMaster)
201 Status 02A0h (Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
202 Revision 02h, Header Type 00h, Bus Latency Timer 00h
203 Self test 00h (Self test not supported)
204 PCI Class Storage, type IDE (ATA)
205 PCI EIDE Controller Features :
206 BusMaster EIDE is supported
207 Primary Channel is in native mode at Addresses 0 & 1
208 Secondary Channel is in native mode at Addresses 2 & 3
209 Subsystem ID 80A61043h Unknown
210 Subsystem Vendor 1043h ASUSTeK Computer Inc
211 Address 0 is an I/O Port : EFE0h..EFE7h
212 Address 1 is an I/O Port : EFACh
213 Address 2 is an I/O Port : EFA0h
214 Address 3 is an I/O Port : EFA8h
215 Address 4 is an I/O Port : EF90h..EF97h
216 System IRQ 5, INT# A
217
218 Bus 0 (PCI), Device Number 31, Device Function 3
219 Vendor 8086h Intel Corporation
220 Device 24D3h 82801EB/ER (ICH5/ICH5R) SMBus Controller
221 Command 0001h (I/O Access)
222 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
223 Revision 02h, Header Type 00h, Bus Latency Timer 00h
224 Self test 00h (Self test not supported)
225 PCI Class Serial, type SMBus Controller
226 Subsystem ID 80A61043h Unknown
227 Subsystem Vendor 1043h ASUSTeK Computer Inc
228 Address 0 is not present or not configured!
229 Address 1 is not present or not configured!
230 Address 2 is not present or not configured!
231 Address 3 is not present or not configured!
232 Address 4 is an I/O Port : 0400h
233 System IRQ 11, INT# B
234
235 Bus 0 (PCI), Device Number 31, Device Function 5
236 Vendor 8086h Intel Corporation
237 Device 24D5h 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller
238 Command 0007h (I/O Access, Memory Access, BusMaster)
239 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
240 Medium Timing)
241 Revision 02h, Header Type 00h, Bus Latency Timer 00h
242 Self test 00h (Self test not supported)
243 PCI Class Multimedia, type Audio
244 Subsystem ID 80F31043h SoundMAX Integrated Digital Audio
245 Subsystem Vendor 1043h ASUSTeK Computer Inc
246 Address 0 is an I/O Port : E800h..E8FFh
247 Address 1 is an I/O Port : EE80h..EEBFh
248 Address 2 is a Memory Address (0-4GiB) : FEBFF400h..FEBFF5FFh
249 Address 3 is a Memory Address (0-4GiB) : FEBFF000h..FEBFF0FFh
250 System IRQ 11, INT# B
251 New Capabilities List Present:
252 Power Management Capability, Version 1.1
253 Does not support low power State D1 or D2
254 Supports PME# signalling from mode(s) D0, D3hot, D3cold
255 PME# signalling is currently enabled
256 3.3v AUX Current required : 375 mA
257 Current Power State : D0 (Device operational, no power saving)
258
259 Bus 1 (AGP), Device Number 0, Device Function 0
260 Vendor 1002h ATI Technologies Inc
261 Device 4150h Radeon 9600 Series (V350)
262 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
263 Status 02B0h (Has Capabilities List, Supports 66MHz,
264 Supports Back-To-Back Trans., Medium Timing)
265 Revision 00h, Header Type 80h, Bus Latency Timer 40h
266 Minimum Bus Grant 08h, Maximum Bus Latency 00h
267 Self test 00h (Self test not supported)
268 Cache line size 16 Bytes (4 DWords)
269 PCI Class Display, type VGA
270 Subsystem ID 0200174Bh Sapphire Radeon 9600 Series (Guess Only!)
271 Subsystem Vendor 174Bh PC Partner Ltd
272 Address 0 is a Memory Address (0-4GiB, Prefetchable) : E0000000h
273 Address 1 is an I/O Port : C000h
274 Address 2 is a Memory Address (0-4GiB) : FE9F0000h
275 System IRQ 10, INT# A
276 Expansion ROM of 128 KiB decoded by this card, currently disabled
277 New Capabilities List Present:
278 AGP Capability, Version 3.0 (AGP 8x and 4x, core register support)
279 AGP Speed(s) Supported : 4x 8x
280 FW Transfers Supported : Yes
281 >4GiB Address Space Supported : No
282 Sideband Addressing Supported : Yes
283 AGP v3.0 Operation Mode Available : Yes
284 Isosynchronous Transactions Supported : No
285 Maximum Command Queue Length : 256 bytes
286 AGP Speed Selected : 8x
287 FW Transfers Enabled : No
288 >4GiB Address Space Enabled : No
289 AGP Enabled : Yes
290 Sideband Addressing Enabled : Yes
291 AGP v3.0 Operation Mode : Enabled
292 Current Command Queue Length : 1 byte
293 Power Management Capability, Version 1.1
294 Supports low power State D1
295 Supports low power State D2
296 Does not support PME# signalling
297 Current Power State : D0 (Device operational, no power saving)
298
299 Bus 1 (AGP), Device Number 0, Device Function 1
300 Vendor 1002h ATI Technologies Inc
301 Device 4170h Radeon 9600 Series - Secondary
302 Command 0007h (I/O Access, Memory Access, BusMaster)
303 Status 02B0h (Has Capabilities List, Supports 66MHz,
304 Supports Back-To-Back Trans., Medium Timing)
305 Revision 00h, Header Type 00h, Bus Latency Timer 40h
306 Minimum Bus Grant 08h, Maximum Bus Latency 00h
307 Self test 00h (Self test not supported)
308 Cache line size 16 Bytes (4 DWords)
309 PCI Class Display, type Other
310 Subsystem ID 0201174Bh Sapphire Radeon 9600 Pro - Secondary (Guess Only!)
311 Subsystem Vendor 174Bh PC Partner Ltd
312 Address 0 is a Memory Address (0-4GiB, Prefetchable) : D0000000h
313 Address 1 is a Memory Address (0-4GiB) : FE9E0000h
314 New Capabilities List Present:
315 Power Management Capability, Version 1.1
316 Supports low power State D1
317 Supports low power State D2
318 Does not support PME# signalling
319 Current Power State : D0 (Device operational, no power saving)
320
321 Bus 2 (PCI), Device Number 5, Device Function 0
322 Vendor 10B7h 3COM Corp, Networking Division
323 Device 1700h 3C940 Gigabit Ethernet PCI CODEC
324 Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
325 System Errors)
326 Status 02B0h (Has Capabilities List, Supports 66MHz,
327 Supports Back-To-Back Trans., Medium Timing)
328 Revision 12h, Header Type 00h, Bus Latency Timer 40h
329 Minimum Bus Grant 17h, Maximum Bus Latency 1Fh
330 Self test 00h (Self test not supported)
331 Cache line size 16 Bytes (4 DWords)
332 PCI Class Network, type Ethernet
333 Subsystem ID 80EB1043h Integrated Gigabit Ethernet Controller
334 Subsystem Vendor 1043h ASUSTeK Computer Inc
335 Address 0 is a Memory Address (0-4GiB) : FEAF8000h..FEAFBFFFh
336 Address 1 is an I/O Port : D800h..D8FFh
337 System IRQ 5, INT# A
338 New Capabilities List Present:
339 Power Management Capability, Version 1.1
340 Supports low power State D1
341 Supports low power State D2
342 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
343 PME# signalling is currently disabled
344 3.3v AUX Current required : 0 mA (Self powered)
345 Current Power State : D0 (Device operational, no power saving)
346 3800 mW D0 power consume
347 3800 mW D0 power dissipate
348 3800 mW D1 power consume
349 3800 mW D1 power dissipate
350 3800 mW D2 power consume
351 3800 mW D2 power dissipate
352 1200 mW D3 power consume
353 1200 mW D3 power dissipate
354 Vital Product Data Capability
355 Identifier 3Com Gigabit LOM (3C940)
356 Part Number 40-0779-000
357 EC Level (Version) Rev. 1.2
358 Manufacturer ID 3Com
359 Serial Number HFSR9B01E8
360 Extended Capability 01h 10h CCh 03h
361 Checksum/End E4h 41*00h
362
363 Remaining RW Area 110*00h
364 End Tag
365
366ROM PCI IRQ routing table Tests....
367 ROM IRQ routing table found at F000h:4EC0h
368 Table Version 1.0 - OK
369 Table size 240 bytes - OK
370 Table Checksum F8h - OK
371 PCI Interrupt Router: 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
372 IRQ's dedicated to PCI : None
373 Error: table entries 3 and 7 refer to the same Bus=0/Device=1!
374 The ROM PCI IRQ routing table appears to be faulty!!
375
376IRQ Summary: IRQs 3,5,10,11,14,15 are used by PCI devices
377Shared IRQs: IRQ 5 is shared by 3 PCI Devices
378 IRQ 10 is shared by 3 PCI Devices
379 IRQ 11 is shared by 3 PCI Devices