1 | |
---|
2 | OS/2 |
---|
3 | (C) Copyright IBM Corp. 1987, 2001. All rights reserved. |
---|
4 | US Government Users Restricted Rights - Use, duplication or disclosure |
---|
5 | restricted by GSA ADP Schedule Contract with IBM Corp. |
---|
6 | Internal revision 14.104b_SMP |
---|
7 | Symbols linked (acpi) |
---|
8 | --:--:-- KEE Version 0x10000 |
---|
9 | --:--:-- |
---|
10 | PSD_install options:" /SMP /!NOD /O1" --:--:-- @#netlabs dot org:3.16#@##1## 21 |
---|
11 | Jun 2009 10:01:49 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005- |
---|
12 | 2009 Build date: Jun 21 2009 10:01:52 |
---|
13 | --:--:-- MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 |
---|
14 | --:--:-- New Stack = FFE30000 Size:0x8000 |
---|
15 | --:--:-- AcpiOsInitialize ALLOC size 65536 at 0xF9A90000 |
---|
16 | --:--:-- AcpiOsInitialize MapMem size 4096 at 0xFFE8A000 |
---|
17 | --:--:-- AcpiOsPredefinedOverride: "_REV" |
---|
18 | --:--:-- AcpiOsPredefinedOverride: "_OS_" |
---|
19 | --:--:-- AcpiOsPredefinedOverride: override to eComStation |
---|
20 | --:--:-- AcpiOsPredefinedOverride: "_GL_" |
---|
21 | --:--:-- AcpiOsPredefinedOverride: "_OSI" |
---|
22 | --:--:-- ACPI: RSDP @ 0xFE020/0x14 (v0 INTEL ) |
---|
23 | --:--:-- ACPI: RSDT @ 0x7F6FD038/0x34 (v1 INTEL D945GLF2 0x7A 0x1000013) |
---|
24 | --:--:-- ACPI: FACP @ 0x7F6FC000/0x74 (v1 INTEL D945GLF2 0x7A MSFT 0x1000013) |
---|
25 | --:--:-- ACPI: DSDT @ 0x7F6F7000/0x45EC (v1 INTEL D945GLF2 0x7A MSFT 0x1000013) |
---|
26 | --:--:-- ACPI: FACS @ 0x7F6A3000/0x40 |
---|
27 | --:--:-- ACPI: APIC @ 0x7F6F6000/0x78 (v1 INTEL D945GLF2 0x7A MSFT 0x1000013) |
---|
28 | --:--:-- ACPI: WDDT @ 0x7F6F5000/0x40 (v1 INTEL D945GLF2 0x7A MSFT 0x1000013) |
---|
29 | --:--:-- ACPI: MCFG @ 0x7F6F4000/0x3C (v1 INTEL D945GLF2 0x7A MSFT 0x1000013) |
---|
30 | --:--:-- AcpiOsTableOverride Ex:FFE65000 New:FFE2FFA4 SIG:[DSDT] |
---|
31 | --:--:-- Table [DSDT] |
---|
32 | --:--:-- Table [FACS] |
---|
33 | --:--:-- Table [FACP] |
---|
34 | --:--:-- Table [APIC] |
---|
35 | --:--:-- Local APIC address: FEE00000h |
---|
36 | --:--:-- System also has 8259 |
---|
37 | --:--:-- APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable |
---|
38 | --:--:-- APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable |
---|
39 | --:--:-- APIC_PROCESSOR: ProcID 3h LocalApicID 82h - not usable |
---|
40 | --:--:-- APIC_PROCESSOR: ProcID 4h LocalApicID 83h - not usable |
---|
41 | --:--:-- APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 |
---|
42 | --:--:-- APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active |
---|
43 | : Bus spec Trigger by: Bus spec |
---|
44 | --:--:-- APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active |
---|
45 | : High 0 Trigger by: Level |
---|
46 | --:--:-- APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: Bus spec Trigger by: |
---|
47 | Bus spec |
---|
48 | --:--:-- APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: Bus spec Trigger by: |
---|
49 | Bus spec |
---|
50 | --:--:-- Table [WDDT] |
---|
51 | --:--:-- Table [MCFG] |
---|
52 | --:--:-- Size of FACDT 244 |
---|
53 | --:--:-- Type of computer - Unspecified |
---|
54 | --:--:-- System vector the SCI interrupt is wired to in 8259 mode. 9 |
---|
55 | --:--:-- System port address of the SMI Command Port 0xB2 |
---|
56 | --:--:-- The value to write to SMI_CMD to disable SMI 0xA0 |
---|
57 | --:--:-- The value to write to SMI_CMD to re-enable SMI 0xA1 |
---|
58 | --:--:-- The value to write to SMI_CMD to enter the S4BIOS state 0x0 |
---|
59 | --:--:-- System port address of the PM1a Event Register Block 400 |
---|
60 | --:--:-- System port address of the PM1b Event Register Block 0 |
---|
61 | --:--:-- Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 |
---|
62 | --:--:-- System port address of the PM1a Control Register Block 404 |
---|
63 | --:--:-- System port address of the PM1b Control Register Block 0 |
---|
64 | --:--:-- Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 |
---|
65 | --:--:-- System port address of the PM2 Control Register Block 420 |
---|
66 | --:--:-- Number of bytes decoded by PM2_CNT_BLK 1 |
---|
67 | --:--:-- System port address of the Power Management Timer Control Register Bloc |
---|
68 | k 408 |
---|
69 | --:--:-- Number of bytes decoded by PM_TMR_BLK (=4) 4 |
---|
70 | --:--:-- System port address of General-Purpose Event 0 Register Block 428 |
---|
71 | --:--:-- System port address of General-Purpose Event 1 Register Block 0 |
---|
72 | --:--:-- Number of bytes decoded by GPE0_BLK 0x8 |
---|
73 | --:--:-- Number of bytes decoded by GPE1_BLK 0x0 |
---|
74 | --:--:-- Offset within the ACPI general-purpose event model where GPE1 based eve |
---|
75 | nts start 0 |
---|
76 | --:--:-- The system does not support a C2 state. 65 |
---|
77 | --:--:-- The system does not support a C3 state 3E9 |
---|
78 | --:--:-- The zero-based index of where the processor's duty cycle setting is wit |
---|
79 | hin the processor's P_CNT register 1 |
---|
80 | --:--:-- The RTC CMOS RAM index to the day-of-month alarm value 13 |
---|
81 | --:--:-- IA-PC Boot Architecture Flags 0x0 |
---|
82 | --:--:-- Fixed feature flags 4A5 |
---|
83 | --:--:-- The reset register: |
---|
84 | --:--:-- Type of address space - System Memory Address 0x0 Width 0 Offset 0 Acce |
---|
85 | ss size 0 |
---|
86 | --:--:-- The value to write to the RESET_REG port to reset the system 0 |
---|
87 | --:--:-- ***** Throttl Width 0 Offset 1 |
---|
88 | --:--:-- evxfevnt-184 [4] Enable: Transition to ACPI mode successful |
---|
89 | --:--:-- evgpeblk-1120 [6] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x |
---|
90 | 9 |
---|
91 | --:--:-- AcpiOsInstallIntterrupHandler IRQ9 handler F9AD23CD |
---|
92 | --:--:-- AcpiOsDerivePCIID([PCI0] ,[PRR0],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 D |
---|
93 | ev:31 Fun:0 |
---|
94 | --:--:-- AcpiOsDerivePCIID([PCI0] ,[PRR1],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 D |
---|
95 | ev:31 Fun:0 |
---|
96 | --:--:-- AcpiOsDerivePCIID([PCI0] ,[ELR0],) Bus:0 Dev:0 Fun:0 - AcpiOsDerivePci |
---|
97 | - Dev: [IELK] Evaluate bad status=5 |
---|
98 | --:--:-- Derive: Bus:0 Dev:31 Fun:0 |
---|
99 | --:--:-- ** Scan EC Status = 0 Find 0 EC |
---|
100 | --:--:-- evgpeblk-1223 [5] EvInitializeGpeBlock: Found 8 Wake, Enabled 3 Runtime |
---|
101 | GPEs in this block |
---|
102 | --:--:-- ** AcpiInitializeObjects mask:0 Status = 0 |
---|
103 | --:--:-- Processor [CPU0] |
---|
104 | --:--:-- Processor [CPU1] |
---|
105 | --:--:-- Processor [CPU2] |
---|
106 | --:--:-- Processor [CPU3] |
---|
107 | --:--:-- |
---|
108 | Init ACPI rc=0 |
---|
109 | --:--:-- IO APIC N0 Phys:0xFEC00000 Lin:0xFFE47000 InitID:0x0 ArbID:0x0 Ver:32 L |
---|
110 | ines:23 |
---|
111 | --:--:-- WakeupVector Lin: FFE46000 Phys: 6F000 IPIStack:FFE44000 s_cpu:0 |
---|
112 | --:--:-- GetWakeupVector Status = 0 |
---|
113 | --:--:-- PIC Mask:FFFFDFFB |
---|
114 | --:--:-- PSD_GET_NUM_OF_PROCS - has 2 CPU |
---|
115 | --:--:-- ProcInit CPU0 |
---|
116 | --:--:-- LApic ID:0x0: ver 0x50014 |
---|
117 | --:--:-- Max LVT=6 |
---|
118 | --:--:-- Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
119 | --:--:-- Status Evaluate Processor 0x0 AE_OK |
---|
120 | --:--:-- Usable:2 Counter:0 |
---|
121 | --:--:-- CPU id to N:0 |
---|
122 | --:--:-- ProcId: 0x1 |
---|
123 | --:--:-- P_BLK: 0x410 |
---|
124 | --:--:-- P_BLK len: 0x6 |
---|
125 | --:--:-- CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
126 | --:--:-- CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
127 | --:--:-- End init CPU0 rc:0 |
---|
128 | --:--:-- StartProcessor: CPU1 id 2 |
---|
129 | --:--:-- StartProcessor: Warm Vector:18000018, BootCode.Lin:0xFFE46000, BootCode |
---|
130 | .Phys:0x6F000 |
---|
131 | --:--:-- StartProcessor 1 id:2 LAPICid:1 |
---|
132 | --:--:-- Wait INI App Proc |
---|
133 | --:--:-- Send SIPI1 |
---|
134 | --:--:-- StartProcessor success SIPI1 |
---|
135 | --:--:-- ProcInit CPU1 |
---|
136 | --:--:-- LApic ID:0x1000000: ver 0x50014 |
---|
137 | --:--:-- Max LVT=6 |
---|
138 | --:--:-- End Startup code |
---|
139 | --:--:-- Set HLT duration as IOdelay:0x187 |
---|
140 | --:--:-- Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
141 | --:--:-- Status Evaluate Processor 0x0 AE_OK |
---|
142 | --:--:-- Usable:2 Counter:1 |
---|
143 | --:--:-- CPU id to N:1 |
---|
144 | --:--:-- ProcId: 0x2 |
---|
145 | --:--:-- P_BLK: 0x410 |
---|
146 | --:--:-- P_BLK len: 0x6 |
---|
147 | --:--:-- CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
148 | --:--:-- CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
149 | --:--:-- End init CPU1 rc:0 |
---|
150 | --:--:-- UNMASK IRQ8 mask:FFFFDEFB |
---|
151 | Symbols linked (screen01) |
---|
152 | 21:34:49 UNMASK IRQ9 mask:FFFFDCFB |
---|
153 | 21:34:49 ** Create resource, max = 31 ** |
---|
154 | 21:34:49 OemHlpXHandler: ACPI_START_EVENTS 3 |
---|
155 | 21:34:49 ** AcpiInstall Power Device Status = 0 |
---|
156 | 21:34:49 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204 |
---|
157 | ] |
---|
158 | 21:34:49 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] |
---|
159 | 21:34:49 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE |
---|
160 | 21:34:49 ** AcpiInstall PMTimer Device Status = 0 |
---|
161 | 21:34:49 ** Total use:63200 unuse:5064 count:1282 ** |
---|
162 | 21:34:49 Event [_L00] Install GPE0x0 |
---|
163 | 21:34:49 Event [_L03] Install GPE0x3 |
---|
164 | 21:34:49 Event [_L04] Install GPE0x4 |
---|
165 | 21:34:49 Event [_L05] Install GPE0x5 |
---|
166 | 21:34:49 Event [_L09] Install GPE0x9 |
---|
167 | 21:34:49 Event [_L0A] Install GPE0xA |
---|
168 | 21:34:49 Event [_L0B] Install GPE0xB |
---|
169 | 21:34:49 Event [_L0C] Install GPE0xC |
---|
170 | 21:34:49 Event [_L0D] Install GPE0xD |
---|
171 | 21:34:49 Event [_L0E] Install GPE0xE |
---|
172 | 21:34:49 Event [_L1D] Install GPE0x1D |
---|
173 | 21:34:49 EndScan GPE Status 0 |
---|
174 | 21:34:49 OemHlpXHandler: ACPI_START_EVENTS 4 |
---|
175 | 21:34:49 OemHlpXHandler: CallACPI16: 4900907, CallACPI32: F9AA5D8E, ExportTable3 |
---|
176 | 2: F9C002B8 |
---|