Context Navigation

Back to Ticket #398

Ticket #398: acpica.log

File acpica.log, 63.9 KB (added by LarsErdmann, 16 years ago)
ACPI log file

Line
1	19 Apr 00:36:06 AcpiDaemon LID device not finding, finish thread
2	_install options:" /OS="Microsoft Windows" /VBE" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19
3	MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0
4	SS Selector fault
5	AcpiOsInitialize ALLOC size 65536 at 0xF9663000
6	AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
7	AcpiOsCreateLock F97C71A0
8	AcpiOsCreateLock F97CCB64
9	AcpiOsPredefinedOverride: "_REV"
10	AcpiOsPredefinedOverride: "_OS_"
11	AcpiOsPredefinedOverride: override to Microsoft Windows
12	AcpiOsPredefinedOverride: "_GL_"
13	AcpiOsPredefinedOverride: "_OSI"
14	* AcpiInitializeSubsystem Status = 0 *
15	ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
16	ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
17	ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
18	ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
19	ACPI: FACS @ 0x7FFF0000/0x40
20	ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
21	* AcpiInitializeTables Status = 0 *
22	AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEADA4 SIG:[DSDT]
23	* AcpiLoadTables Status = 0 *
24	Table [DSDT]
25	Table [FACS]
26	Table [FACP]
27	Table [APIC]
28	Local APIC address: FEE00000h
29	System also has 8259
30	APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
31	APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
32	APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
33	APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
34	Size of FACDT 244
35	Type of computer - Unspecified
36	System vector the SCI interrupt is wired to in 8259 mode. 9
37	System port address of the SMI Command Port 0x1048
38	The value to write to SMI_CMD to disable SMI 0x81
39	The value to write to SMI_CMD to re-enable SMI 0x80
40	The value to write to SMI_CMD to enter the S4BIOS state 0x0
41	System port address of the PM1a Event Register Block 1000
42	System port address of the PM1b Event Register Block 0
43	Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
44	System port address of the PM1a Control Register Block 1004
45	System port address of the PM1b Control Register Block 0
46	Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
47	System port address of the PM2 Control Register Block 1016
48	Number of bytes decoded by PM2_CNT_BLK 1
49	System port address of the Power Management Timer Control Register Block 1008
50	Number of bytes decoded by PM_TMR_BLK (=4) 4
51	System port address of General-Purpose Event 0 Register Block 1020
52	System port address of General-Purpose Event 1 Register Block 1030
53	Number of bytes decoded by GPE0_BLK 0x4
54	Number of bytes decoded by GPE1_BLK 0x4
55	Offset within the ACPI general-purpose event model where GPE1 based events start 10
56	GPE enable register: 4: 13
57	GPE status register: 0: 0
58	The worst-case hardware latency to enter and exit a C2 state 90 us
59	The worst-case hardware latency to enter and exit a C3 state 900 us
60	The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
61	The RTC CMOS RAM index to the day-of-month alarm value 126
62	The RTC CMOS RAM index to the month of year alarm value 127
63	IA-PC Boot Architecture Flags 0x0
64	Fixed feature flags 4A5
65	The reset register:
66	Type of address space - System Memory
67	Register Bit Width 0
68	Register Bit Offset 0
69	Access size 0
70	Address 0
71	The value to write to the RESET_REG port to reset the system 0
72	***** Throttl Width 0 Offset 1
73	AcpiOsInstallIntterrupHandler IRQ9 handler F9803CDB
74	** AcpiEnableSubsystem Status = 0
75	AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
76	AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
77	** Scan EC Status = 0
78	** AcpiInitializeObjects mask:0 Status = 0
79	Processor [CPU0]
80	Status 0x0 0
81	Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
82	Status Evaluate Processor 0x0 AE_OK
83	Usable:1 Counter:0
84	CPU id to N:0
85	ProcId: 0x0
86	P_BLK: 0x0
87	P_BLK len: 0x0
88	CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
89	CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
90	Found bridge "PCI0" BBN is absent status:5
91	Finding:0 bridges
92	0:0.0 Class:600 Hdr:80 Bridge H->0
93	0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
94	0:2.0 Class:601 Hdr:80
95	0:2.3 Class:C00 Hdr:0
96	0:2.5 Class:101 Hdr:0
97	0:2.7 Class:401 Hdr:0
98	0:3.0 Class:C03 Hdr:80
99	0:3.1 Class:C03 Hdr:0
100	0:3.2 Class:C03 Hdr:0
101	0:3.3 Class:C03 Hdr:0
102	0:4.0 Class:200 Hdr:0
103	0:8.0 Class:480 Hdr:0
104	0:10.0 Class:780 Hdr:0
105	1:0.0 Class:300 Hdr:0
106	PCI Bus scan: 2 PCI buses found.
107	Scan ACPI tree for PCI functions
108	0:0.0 'PCI0' (F9665C88)
109	0:2.5 'IDEC' (F9665D60)
110	0:6.7 'PCI1' (F9667698)
111	0:7.7 'PCI2' (F9667710)
112	0:8.7 'PCI3' (F9667788)
113	0:10.7 'PCI4' (F9667800)
114	0:2.0 'S962' (F9667878)
115	0:3.0 'USB0' (F9667E98)
116	0:3.1 'USB1' (F9667F48)
117	0:3.2 'USB2' (F9667FF8)
118	0:3.3 'USB3' (F96680A8)
119	0:4.0 'MAC0' (F9668158)
120	0:2.7 'AUD0' (F96681A8)
121	0:2.6 'AMR0' (F96681F8)
122	Bridges found:
123	0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9665C88) _PRT
124	0:1.0 class:604 type: 1 Bus 0->1
125	IRQLinks found:
126	0: 'LNKB' (F96684F0) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
127	A[]
128	1: 'LNKC' (F9668748) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
129	A[]
130	2: 'LNKD' (F96689A0) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
131	A[]
132	3: 'LNKA' (F9668298) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
133	A[]
134	4: 'LNKE' (F9668BF8) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
135	A[]
136	5: 'LNKF' (F9668E50) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
137	A[]
138	6: 'LNKG' (F96690A8) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
139	A[]
140	7: 'LNKH' (F9669300) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
141	A[]
142	PCI devices found:
143	0:0.0 1039:648 'PCI0'
144	0:1.0 1039:1
145	0:2.0 1039:8 'S962'
146	0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
147	0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
148	0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
149	0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
150	0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
151	0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
152	0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
153	0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
154	0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
155	0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
156	1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
157	Bus detected - 1
158	** AcpiInstall Power Device Status = 0
159	ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
160	ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
161	** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
162	** AcpiInstall PMTimer Device Status = 0
163	Total use:94576 unuse:8904 count:1574
164	Get GpeHdl Status = 0 - AE_OK
165	Event [_L13]
166	Install GPE0x13 Status 0x0
167	Event [_L0E]
168	Install GPE0xE Status 0x0
169	Event [_L04]
170	Install GPE0x4 Status 0x0
171	Event [_L07]
172	Install GPE0x7 Status 0x0
173	Event [_L06]
174	Install GPE0x6 Status 0x0
175	Event [_L05]
176	Install GPE0x5 Status 0x0
177	Event [_L08]
178	Install GPE0x8 Status 0x0
179	Event [_L0F]
180	Install GPE0xF Status 0x0
181	Event [_L0D]
182	Install GPE0xD Status 0x0
183	Event [_L0B]
184	Install GPE0xB Status 0x0
185	Event [_L0C]
186	Install GPE0xC Status 0x0
187	EndScan GPE Status 0
188	===== Info ========
189	Int Level 9
190	In Xrupt F966FE20 in arg F966FE20
191	Node
192	Name [_GPE]
193	Flags: 0
194	Reg count 2
195	GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
196	GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
197	GPE0x6 Flag:0x2 Status - Set 0x0 Enable 0x0
198	GPE0x7 Flag:0x2 Status - Set 0x0 Enable 0x0
199	GPE0 Status:1020 Enable:1022 EnableWake:F0 EnableRun:0 BaseGPENumber:0
200	GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
201	GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
202	GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
203	GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
204	GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
205	GPE0xF Flag:0x2 Status - Set 0x0 Enable 0x0
206	GPE1 Status:1021 Enable:1023 EnableWake:F9 EnableRun:0 BaseGPENumber:8
207	===== Info ========
208	Int Level 9
209	In Xrupt F966FE20 in arg F966FF98
210	Node
211	Name [_GPE]
212	Flags: 0
213	Reg count 2
214	GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
215	GPE0 Status:1030 Enable:1032 EnableWake:0 EnableRun:0 BaseGPENumber:10
216	GPE1 Status:1031 Enable:1033 EnableWake:0 EnableRun:0 BaseGPENumber:18
217	=========== Status 0x0 0
218	APM: PSD find success. PSD Ftable:F97C017C
219	APM:Max C state 0
220	Register Notify 1st FD05828D
221	FindPCIDevice
222	Need: B:0 D:2 F:5
223	Finding APIC0 PIC11 Dev: [IDEC]
224	Uniaud32: PSD find success. PSD Ftable:F97C017C
225	FindPCIDevice
226	Need: B:0 D:2 F:0
227	****** Event tread *************
228	AllocateSuspendMemory s_cpu:0
229	Alloc s_cpu OK CPU0 2304 bytes at 1
230	AllocSuspend: CPU0 CR3:200000
231	Status 1Mb alloc 0
232	19 Apr 00:36:07 acpica$ log is reading
233	APM: Unsetting suspend state
234	APM:Max C state 3
235	APM: HookC2 [FD057209] Port 4
236	APM: HookC3 [FD05726F] Port 5
237	19 Apr 00:41:52 AcpiDaemon LID thread is starting ID 0x4
238	0
239
240	PSD_install options:" /OS="Microsoft Windows" /VBE" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19
241	MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0
242	SS Selector fault
243	AcpiOsInitialize ALLOC size 65536 at 0xF9663000
244	AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
245	AcpiOsCreateLock F97C71A0
246	AcpiOsCreateLock F97CCB64
247	AcpiOsPredefinedOverride: "_REV"
248	AcpiOsPredefinedOverride: "_OS_"
249	AcpiOsPredefinedOverride: override to Microsoft Windows
250	AcpiOsPredefinedOverride: "_GL_"
251	AcpiOsPredefinedOverride: "_OSI"
252	* AcpiInitializeSubsystem Status = 0 *
253	ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
254	ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
255	ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
256	ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
257	ACPI: FACS @ 0x7FFF0000/0x40
258	ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
259	* AcpiInitializeTables Status = 0 *
260	AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEADA4 SIG:[DSDT]
261	* AcpiLoadTables Status = 0 *
262	Table [DSDT]
263	Table [FACS]
264	Table [FACP]
265	Table [APIC]
266	Local APIC address: FEE00000h
267	System also has 8259
268	APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
269	APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
270	APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
271	APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
272	Size of FACDT 244
273	Type of computer - Unspecified
274	System vector the SCI interrupt is wired to in 8259 mode. 9
275	System port address of the SMI Command Port 0x1048
276	The value to write to SMI_CMD to disable SMI 0x81
277	The value to write to SMI_CMD to re-enable SMI 0x80
278	The value to write to SMI_CMD to enter the S4BIOS state 0x0
279	System port address of the PM1a Event Register Block 1000
280	System port address of the PM1b Event Register Block 0
281	Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
282	System port address of the PM1a Control Register Block 1004
283	System port address of the PM1b Control Register Block 0
284	Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
285	System port address of the PM2 Control Register Block 1016
286	Number of bytes decoded by PM2_CNT_BLK 1
287	System port address of the Power Management Timer Control Register Block 1008
288	Number of bytes decoded by PM_TMR_BLK (=4) 4
289	System port address of General-Purpose Event 0 Register Block 1020
290	System port address of General-Purpose Event 1 Register Block 1030
291	Number of bytes decoded by GPE0_BLK 0x4
292	Number of bytes decoded by GPE1_BLK 0x4
293	Offset within the ACPI general-purpose event model where GPE1 based events start 10
294	GPE enable register: 4: 13
295	GPE status register: 0: 0
296	The worst-case hardware latency to enter and exit a C2 state 90 us
297	The worst-case hardware latency to enter and exit a C3 state 900 us
298	The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
299	The RTC CMOS RAM index to the day-of-month alarm value 126
300	The RTC CMOS RAM index to the month of year alarm value 127
301	IA-PC Boot Architecture Flags 0x0
302	Fixed feature flags 4A5
303	The reset register:
304	Type of address space - System Memory
305	Register Bit Width 0
306	Register Bit Offset 0
307	Access size 0
308	Address 0
309	The value to write to the RESET_REG port to reset the system 0
310	***** Throttl Width 0 Offset 1
311	AcpiOsInstallIntterrupHandler IRQ9 handler F9803CDB
312	** AcpiEnableSubsystem Status = 0
313	AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
314	AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
315	** Scan EC Status = 0
316	** AcpiInitializeObjects mask:0 Status = 0
317	Processor [CPU0]
318	Status 0x0 0
319	Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
320	Status Evaluate Processor 0x0 AE_OK
321	Usable:1 Counter:0
322	CPU id to N:0
323	ProcId: 0x0
324	P_BLK: 0x0
325	P_BLK len: 0x0
326	CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
327	CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
328	Found bridge "PCI0" BBN is absent status:5
329	Finding:0 bridges
330	0:0.0 Class:600 Hdr:80 Bridge H->0
331	0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
332	0:2.0 Class:601 Hdr:80
333	0:2.3 Class:C00 Hdr:0
334	0:2.5 Class:101 Hdr:0
335	0:2.7 Class:401 Hdr:0
336	0:3.0 Class:C03 Hdr:80
337	0:3.1 Class:C03 Hdr:0
338	0:3.2 Class:C03 Hdr:0
339	0:3.3 Class:C03 Hdr:0
340	0:4.0 Class:200 Hdr:0
341	0:8.0 Class:480 Hdr:0
342	0:10.0 Class:780 Hdr:0
343	1:0.0 Class:300 Hdr:0
344	PCI Bus scan: 2 PCI buses found.
345	Scan ACPI tree for PCI functions
346	0:0.0 'PCI0' (F9665C88)
347	0:2.5 'IDEC' (F9665D60)
348	0:6.7 'PCI1' (F9667698)
349	0:7.7 'PCI2' (F9667710)
350	0:8.7 'PCI3' (F9667788)
351	0:10.7 'PCI4' (F9667800)
352	0:2.0 'S962' (F9667878)
353	0:3.0 'USB0' (F9667E98)
354	0:3.1 'USB1' (F9667F48)
355	0:3.2 'USB2' (F9667FF8)
356	0:3.3 'USB3' (F96680A8)
357	0:4.0 'MAC0' (F9668158)
358	0:2.7 'AUD0' (F96681A8)
359	0:2.6 'AMR0' (F96681F8)
360	Bridges found:
361	0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9665C88) _PRT
362	0:1.0 class:604 type: 1 Bus 0->1
363	IRQLinks found:
364	0: 'LNKB' (F96684F0) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
365	A[]
366	1: 'LNKC' (F9668748) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
367	A[]
368	2: 'LNKD' (F96689A0) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
369	A[]
370	3: 'LNKA' (F9668298) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
371	A[]
372	4: 'LNKE' (F9668BF8) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
373	A[]
374	5: 'LNKF' (F9668E50) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
375	A[]
376	6: 'LNKG' (F96690A8) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
377	A[]
378	7: 'LNKH' (F9669300) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
379	A[]
380	PCI devices found:
381	0:0.0 1039:648 'PCI0'
382	0:1.0 1039:1
383	0:2.0 1039:8 'S962'
384	0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
385	0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
386	0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
387	0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
388	0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
389	0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
390	0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
391	0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
392	0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
393	0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
394	1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
395	Bus detected - 1
396	** AcpiInstall Power Device Status = 0
397	ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
398	ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
399	** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
400	** AcpiInstall PMTimer Device Status = 0
401	Total use:94576 unuse:8904 count:1574
402	Get GpeHdl Status = 0 - AE_OK
403	Event [_L13]
404	Install GPE0x13 Status 0x0
405	Event [_L0E]
406	Install GPE0xE Status 0x0
407	Event [_L04]
408	Install GPE0x4 Status 0x0
409	Event [_L07]
410	Install GPE0x7 Status 0x0
411	Event [_L06]
412	Install GPE0x6 Status 0x0
413	Event [_L05]
414	Install GPE0x5 Status 0x0
415	Event [_L08]
416	Install GPE0x8 Status 0x0
417	Event [_L0F]
418	Install GPE0xF Status 0x0
419	Event [_L0D]
420	Install GPE0xD Status 0x0
421	Event [_L0B]
422	Install GPE0xB Status 0x0
423	Event [_L0C]
424	Install GPE0xC Status 0x0
425	EndScan GPE Status 0
426	===== Info ========
427	Int Level 9
428	In Xrupt F966FE20 in arg F966FE20
429	Node
430	Name [_GPE]
431	Flags: 0
432	Reg count 2
433	GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
434	GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
435	GPE0x6 Flag:0x2 Status - Set 0x0 Enable 0x0
436	GPE0x7 Flag:0x2 Status - Set 0x0 Enable 0x0
437	GPE0 Status:1020 Enable:1022 EnableWake:F0 EnableRun:0 BaseGPENumber:0
438	GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
439	GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
440	GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
441	GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
442	GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
443	GPE0xF Flag:0x2 Status - Set 0x0 Enable 0x0
444	GPE1 Status:1021 Enable:1023 EnableWake:F9 EnableRun:0 BaseGPENumber:8
445	===== Info ========
446	Int Level 9
447	In Xrupt F966FE20 in arg F966FF98
448	Node
449	Name [_GPE]
450	Flags: 0
451	Reg count 2
452	GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
453	GPE0 Status:1030 Enable:1032 EnableWake:0 EnableRun:0 BaseGPENumber:10
454	GPE1 Status:1031 Enable:1033 EnableWake:0 EnableRun:0 BaseGPENumber:18
455	=========== Status 0x0 0
456	APM: PSD find success. PSD Ftable:F97C017C
457	APM:Max C state 0
458	Register Notify 1st FD05828D
459	FindPCIDevice
460	Need: B:0 D:2 F:5
461	Finding APIC0 PIC11 Dev: [IDEC]
462	Uniaud32: PSD find success. PSD Ftable:F97C017C
463	FindPCIDevice
464	Need: B:0 D:2 F:0
465	****** Event tread *************
466	AllocateSuspendMemory s_cpu:0
467	Alloc s_cpu OK CPU0 2304 bytes at 1
468	AllocSuspend: CPU0 CR3:200000
469	Status 1Mb alloc 0
470	19 Apr 00:41:52 acpica$ log is reading
471	APM: Unsetting suspend state
472	APM:Max C state 3
473	APM: HookC2 [FD057209] Port 4
474	APM: HookC3 [FD05726F] Port 5
475	19 Apr 01:58:28 acpica$ log is reading
476	KEE Veing, finish thread
477	_install options:" /OS="Microsoft Windows" /VBE" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19
478	MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0
479	SS Selector fault
480	AcpiOsInitialize ALLOC size 65536 at 0xF9663000
481	AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
482	AcpiOsCreateLock F97C71A0
483	AcpiOsCreateLock F97CCB64
484	AcpiOsPredefinedOverride: "_REV"
485	AcpiOsPredefinedOverride: "_OS_"
486	AcpiOsPredefinedOverride: override to Microsoft Windows
487	AcpiOsPredefinedOverride: "_GL_"
488	AcpiOsPredefinedOverride: "_OSI"
489	* AcpiInitializeSubsystem Status = 0 *
490	ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
491	ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
492	ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
493	ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
494	ACPI: FACS @ 0x7FFF0000/0x40
495	ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
496	* AcpiInitializeTables Status = 0 *
497	AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEADA4 SIG:[DSDT]
498	* AcpiLoadTables Status = 0 *
499	Table [DSDT]
500	Table [FACS]
501	Table [FACP]
502	Table [APIC]
503	Local APIC address: FEE00000h
504	System also has 8259
505	APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
506	APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
507	APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
508	APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
509	Size of FACDT 244
510	Type of computer - Unspecified
511	System vector the SCI interrupt is wired to in 8259 mode. 9
512	System port address of the SMI Command Port 0x1048
513	The value to write to SMI_CMD to disable SMI 0x81
514	The value to write to SMI_CMD to re-enable SMI 0x80
515	The value to write to SMI_CMD to enter the S4BIOS state 0x0
516	System port address of the PM1a Event Register Block 1000
517	System port address of the PM1b Event Register Block 0
518	Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
519	System port address of the PM1a Control Register Block 1004
520	System port address of the PM1b Control Register Block 0
521	Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
522	System port address of the PM2 Control Register Block 1016
523	Number of bytes decoded by PM2_CNT_BLK 1
524	System port address of the Power Management Timer Control Register Block 1008
525	Number of bytes decoded by PM_TMR_BLK (=4) 4
526	System port address of General-Purpose Event 0 Register Block 1020
527	System port address of General-Purpose Event 1 Register Block 1030
528	Number of bytes decoded by GPE0_BLK 0x4
529	Number of bytes decoded by GPE1_BLK 0x4
530	Offset within the ACPI general-purpose event model where GPE1 based events start 10
531	GPE enable register: 4: 13
532	GPE status register: 0: 0
533	The worst-case hardware latency to enter and exit a C2 state 90 us
534	The worst-case hardware latency to enter and exit a C3 state 900 us
535	The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
536	The RTC CMOS RAM index to the day-of-month alarm value 126
537	The RTC CMOS RAM index to the month of year alarm value 127
538	IA-PC Boot Architecture Flags 0x0
539	Fixed feature flags 4A5
540	The reset register:
541	Type of address space - System Memory
542	Register Bit Width 0
543	Register Bit Offset 0
544	Access size 0
545	Address 0
546	The value to write to the RESET_REG port to reset the system 0
547	***** Throttl Width 0 Offset 1
548	AcpiOsInstallIntterrupHandler IRQ9 handler F9803CDB
549	** AcpiEnableSubsystem Status = 0
550	AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
551	AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
552	** Scan EC Status = 0
553	** AcpiInitializeObjects mask:0 Status = 0
554	Processor [CPU0]
555	Status 0x0 0
556	Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
557	Status Evaluate Processor 0x0 AE_OK
558	Usable:1 Counter:0
559	CPU id to N:0
560	ProcId: 0x0
561	P_BLK: 0x0
562	P_BLK len: 0x0
563	CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
564	CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
565	Found bridge "PCI0" BBN is absent status:5
566	Finding:0 bridges
567	0:0.0 Class:600 Hdr:80 Bridge H->0
568	0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
569	0:2.0 Class:601 Hdr:80
570	0:2.3 Class:C00 Hdr:0
571	0:2.5 Class:101 Hdr:0
572	0:2.7 Class:401 Hdr:0
573	0:3.0 Class:C03 Hdr:80
574	0:3.1 Class:C03 Hdr:0
575	0:3.2 Class:C03 Hdr:0
576	0:3.3 Class:C03 Hdr:0
577	0:4.0 Class:200 Hdr:0
578	0:8.0 Class:480 Hdr:0
579	0:10.0 Class:780 Hdr:0
580	1:0.0 Class:300 Hdr:0
581	PCI Bus scan: 2 PCI buses found.
582	Scan ACPI tree for PCI functions
583	0:0.0 'PCI0' (F9665C88)
584	0:2.5 'IDEC' (F9665D60)
585	0:6.7 'PCI1' (F9667698)
586	0:7.7 'PCI2' (F9667710)
587	0:8.7 'PCI3' (F9667788)
588	0:10.7 'PCI4' (F9667800)
589	0:2.0 'S962' (F9667878)
590	0:3.0 'USB0' (F9667E98)
591	0:3.1 'USB1' (F9667F48)
592	0:3.2 'USB2' (F9667FF8)
593	0:3.3 'USB3' (F96680A8)
594	0:4.0 'MAC0' (F9668158)
595	0:2.7 'AUD0' (F96681A8)
596	0:2.6 'AMR0' (F96681F8)
597	Bridges found:
598	0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9665C88) _PRT
599	0:1.0 class:604 type: 1 Bus 0->1
600	IRQLinks found:
601	0: 'LNKB' (F96684F0) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
602	A[]
603	1: 'LNKC' (F9668748) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
604	A[]
605	2: 'LNKD' (F96689A0) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
606	A[]
607	3: 'LNKA' (F9668298) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
608	A[]
609	4: 'LNKE' (F9668BF8) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
610	A[]
611	5: 'LNKF' (F9668E50) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
612	A[]
613	6: 'LNKG' (F96690A8) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
614	A[]
615	7: 'LNKH' (F9669300) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
616	A[]
617	PCI devices found:
618	0:0.0 1039:648 'PCI0'
619	0:1.0 1039:1
620	0:2.0 1039:8 'S962'
621	0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
622	0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
623	0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
624	0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
625	0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
626	0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
627	0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
628	0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
629	0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
630	0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
631	1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
632	Bus detected - 1
633	** AcpiInstall Power Device Status = 0
634	ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
635	ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
636	** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
637	** AcpiInstall PMTimer Device Status = 0
638	Total use:94576 unuse:8904 count:1574
639	Get GpeHdl Status = 0 - AE_OK
640	Event [_L13]
641	Install GPE0x13 Status 0x0
642	Event [_L0E]
643	Install GPE0xE Status 0x0
644	Event [_L04]
645	Install GPE0x4 Status 0x0
646	Event [_L07]
647	Install GPE0x7 Status 0x0
648	Event [_L06]
649	Install GPE0x6 Status 0x0
650	Event [_L05]
651	Install GPE0x5 Status 0x0
652	Event [_L08]
653	Install GPE0x8 Status 0x0
654	Event [_L0F]
655	Install GPE0xF Status 0x0
656	Event [_L0D]
657	Install GPE0xD Status 0x0
658	Event [_L0B]
659	Install GPE0xB Status 0x0
660	Event [_L0C]
661	Install GPE0xC Status 0x0
662	EndScan GPE Status 0
663	===== Info ========
664	Int Level 9
665	In Xrupt F966FE20 in arg F966FE20
666	Node
667	Name [_GPE]
668	Flags: 0
669	Reg count 2
670	GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
671	GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
672	GPE0x6 Flag:0x2 Status - Set 0x0 Enable 0x0
673	GPE0x7 Flag:0x2 Status - Set 0x0 Enable 0x0
674	GPE0 Status:1020 Enable:1022 EnableWake:F0 EnableRun:0 BaseGPENumber:0
675	GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
676	GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
677	GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
678	GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
679	GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
680	GPE0xF Flag:0x2 Status - Set 0x0 Enable 0x0
681	GPE1 Status:1021 Enable:1023 EnableWake:F9 EnableRun:0 BaseGPENumber:8
682	===== Info ========
683	Int Level 9
684	In Xrupt F966FE20 in arg F966FF98
685	Node
686	Name [_GPE]
687	Flags: 0
688	Reg count 2
689	GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
690	GPE0 Status:1030 Enable:1032 EnableWake:0 EnableRun:0 BaseGPENumber:10
691	GPE1 Status:1031 Enable:1033 EnableWake:0 EnableRun:0 BaseGPENumber:18
692	=========== Status 0x0 0
693	APM: PSD find success. PSD Ftable:F97C017C
694	APM:Max C state 0
695	Register Notify 1st FD05828D
696	FindPCIDevice
697	Need: B:0 D:2 F:5
698	Finding APIC0 PIC11 Dev: [IDEC]
699	Uniaud32: PSD find success. PSD Ftable:F97C017C
700	FindPCIDevice
701	Need: B:0 D:2 F:0
702	****** Event tread *************
703	AllocateSuspendMemory s_cpu:0
704	Alloc s_cpu OK CPU0 2304 bytes at 0
705	AllocSuspend: CPU0 CR3:200000
706	Status 1Mb alloc 0
707	19 Apr 01:58:28 acpica$ log is reading
708	APM: Unsetting suspend state
709	APM:Max C state 3
710	APM: HookC2 [FD057209] Port 4
711	APM: HookC3 [FD05726F] Port 5
712	19 Apr 02:07:50 AcpiDaemon LID thread is starting ID 0x4
713	0
714
715	PSD_install options:" /OS="Microsoft Windows" /VBE" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19
716	MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0
717	SS Selector fault
718	AcpiOsInitialize ALLOC size 65536 at 0xF9663000
719	AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
720	AcpiOsCreateLock F97C71A0
721	AcpiOsCreateLock F97CCB64
722	AcpiOsPredefinedOverride: "_REV"
723	AcpiOsPredefinedOverride: "_OS_"
724	AcpiOsPredefinedOverride: override to Microsoft Windows
725	AcpiOsPredefinedOverride: "_GL_"
726	AcpiOsPredefinedOverride: "_OSI"
727	* AcpiInitializeSubsystem Status = 0 *
728	ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
729	ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
730	ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
731	ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
732	ACPI: FACS @ 0x7FFF0000/0x40
733	ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
734	* AcpiInitializeTables Status = 0 *
735	AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEADA4 SIG:[DSDT]
736	* AcpiLoadTables Status = 0 *
737	Table [DSDT]
738	Table [FACS]
739	Table [FACP]
740	Table [APIC]
741	Local APIC address: FEE00000h
742	System also has 8259
743	APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
744	APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
745	APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
746	APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
747	Size of FACDT 244
748	Type of computer - Unspecified
749	System vector the SCI interrupt is wired to in 8259 mode. 9
750	System port address of the SMI Command Port 0x1048
751	The value to write to SMI_CMD to disable SMI 0x81
752	The value to write to SMI_CMD to re-enable SMI 0x80
753	The value to write to SMI_CMD to enter the S4BIOS state 0x0
754	System port address of the PM1a Event Register Block 1000
755	System port address of the PM1b Event Register Block 0
756	Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
757	System port address of the PM1a Control Register Block 1004
758	System port address of the PM1b Control Register Block 0
759	Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
760	System port address of the PM2 Control Register Block 1016
761	Number of bytes decoded by PM2_CNT_BLK 1
762	System port address of the Power Management Timer Control Register Block 1008
763	Number of bytes decoded by PM_TMR_BLK (=4) 4
764	System port address of General-Purpose Event 0 Register Block 1020
765	System port address of General-Purpose Event 1 Register Block 1030
766	Number of bytes decoded by GPE0_BLK 0x4
767	Number of bytes decoded by GPE1_BLK 0x4
768	Offset within the ACPI general-purpose event model where GPE1 based events start 10
769	GPE enable register: 4: 13
770	GPE status register: 0: 0
771	The worst-case hardware latency to enter and exit a C2 state 90 us
772	The worst-case hardware latency to enter and exit a C3 state 900 us
773	The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
774	The RTC CMOS RAM index to the day-of-month alarm value 126
775	The RTC CMOS RAM index to the month of year alarm value 127
776	IA-PC Boot Architecture Flags 0x0
777	Fixed feature flags 4A5
778	The reset register:
779	Type of address space - System Memory
780	Register Bit Width 0
781	Register Bit Offset 0
782	Access size 0
783	Address 0
784	The value to write to the RESET_REG port to reset the system 0
785	***** Throttl Width 0 Offset 1
786	AcpiOsInstallIntterrupHandler IRQ9 handler F9803CDB
787	** AcpiEnableSubsystem Status = 0
788	AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
789	AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
790	** Scan EC Status = 0
791	** AcpiInitializeObjects mask:0 Status = 0
792	Processor [CPU0]
793	Status 0x0 0
794	Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
795	Status Evaluate Processor 0x0 AE_OK
796	Usable:1 Counter:0
797	CPU id to N:0
798	ProcId: 0x0
799	P_BLK: 0x0
800	P_BLK len: 0x0
801	CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
802	CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
803	Found bridge "PCI0" BBN is absent status:5
804	Finding:0 bridges
805	0:0.0 Class:600 Hdr:80 Bridge H->0
806	0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
807	0:2.0 Class:601 Hdr:80
808	0:2.3 Class:C00 Hdr:0
809	0:2.5 Class:101 Hdr:0
810	0:2.7 Class:401 Hdr:0
811	0:3.0 Class:C03 Hdr:80
812	0:3.1 Class:C03 Hdr:0
813	0:3.2 Class:C03 Hdr:0
814	0:3.3 Class:C03 Hdr:0
815	0:4.0 Class:200 Hdr:0
816	0:8.0 Class:480 Hdr:0
817	0:10.0 Class:780 Hdr:0
818	1:0.0 Class:300 Hdr:0
819	PCI Bus scan: 2 PCI buses found.
820	Scan ACPI tree for PCI functions
821	0:0.0 'PCI0' (F9665C88)
822	0:2.5 'IDEC' (F9665D60)
823	0:6.7 'PCI1' (F9667698)
824	0:7.7 'PCI2' (F9667710)
825	0:8.7 'PCI3' (F9667788)
826	0:10.7 'PCI4' (F9667800)
827	0:2.0 'S962' (F9667878)
828	0:3.0 'USB0' (F9667E98)
829	0:3.1 'USB1' (F9667F48)
830	0:3.2 'USB2' (F9667FF8)
831	0:3.3 'USB3' (F96680A8)
832	0:4.0 'MAC0' (F9668158)
833	0:2.7 'AUD0' (F96681A8)
834	0:2.6 'AMR0' (F96681F8)
835	Bridges found:
836	0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9665C88) _PRT
837	0:1.0 class:604 type: 1 Bus 0->1
838	IRQLinks found:
839	0: 'LNKB' (F96684F0) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
840	A[]
841	1: 'LNKC' (F9668748) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
842	A[]
843	2: 'LNKD' (F96689A0) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
844	A[]
845	3: 'LNKA' (F9668298) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
846	A[]
847	4: 'LNKE' (F9668BF8) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
848	A[]
849	5: 'LNKF' (F9668E50) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
850	A[]
851	6: 'LNKG' (F96690A8) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
852	A[]
853	7: 'LNKH' (F9669300) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
854	A[]
855	PCI devices found:
856	0:0.0 1039:648 'PCI0'
857	0:1.0 1039:1
858	0:2.0 1039:8 'S962'
859	0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
860	0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
861	0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
862	0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
863	0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
864	0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
865	0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
866	0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
867	0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
868	0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
869	1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
870	Bus detected - 1
871	** AcpiInstall Power Device Status = 0
872	ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
873	ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
874	** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
875	** AcpiInstall PMTimer Device Status = 0
876	Total use:94576 unuse:8904 count:1574
877	Get GpeHdl Status = 0 - AE_OK
878	Event [_L13]
879	Install GPE0x13 Status 0x0
880	Event [_L0E]
881	Install GPE0xE Status 0x0
882	Event [_L04]
883	Install GPE0x4 Status 0x0
884	Event [_L07]
885	Install GPE0x7 Status 0x0
886	Event [_L06]
887	Install GPE0x6 Status 0x0
888	Event [_L05]
889	Install GPE0x5 Status 0x0
890	Event [_L08]
891	Install GPE0x8 Status 0x0
892	Event [_L0F]
893	Install GPE0xF Status 0x0
894	Event [_L0D]
895	Install GPE0xD Status 0x0
896	Event [_L0B]
897	Install GPE0xB Status 0x0
898	Event [_L0C]
899	Install GPE0xC Status 0x0
900	EndScan GPE Status 0
901	===== Info ========
902	Int Level 9
903	In Xrupt F966FE20 in arg F966FE20
904	Node
905	Name [_GPE]
906	Flags: 0
907	Reg count 2
908	GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
909	GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
910	GPE0x6 Flag:0x2 Status - Set 0x0 Enable 0x0
911	GPE0x7 Flag:0x2 Status - Set 0x0 Enable 0x0
912	GPE0 Status:1020 Enable:1022 EnableWake:F0 EnableRun:0 BaseGPENumber:0
913	GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
914	GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
915	GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
916	GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
917	GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
918	GPE0xF Flag:0x2 Status - Set 0x0 Enable 0x0
919	GPE1 Status:1021 Enable:1023 EnableWake:F9 EnableRun:0 BaseGPENumber:8
920	===== Info ========
921	Int Level 9
922	In Xrupt F966FE20 in arg F966FF98
923	Node
924	Name [_GPE]
925	Flags: 0
926	Reg count 2
927	GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
928	GPE0 Status:1030 Enable:1032 EnableWake:0 EnableRun:0 BaseGPENumber:10
929	GPE1 Status:1031 Enable:1033 EnableWake:0 EnableRun:0 BaseGPENumber:18
930	=========== Status 0x0 0
931	APM: PSD find success. PSD Ftable:F97C017C
932	APM:Max C state 0
933	Register Notify 1st FD05828D
934	FindPCIDevice
935	Need: B:0 D:2 F:5
936	Finding APIC0 PIC11 Dev: [IDEC]
937	Uniaud32: PSD find success. PSD Ftable:F97C017C
938	FindPCIDevice
939	Need: B:0 D:2 F:0
940	****** Event tread *************
941	AllocateSuspendMemory s_cpu:0
942	Alloc s_cpu OK CPU0 2304 bytes at 0
943	AllocSuspend: CPU0 CR3:200000
944	Status 1Mb alloc 0
945	19 Apr 02:07:50 acpica$ log is reading
946	APM: Unsetting suspend state
947	APM:Max C state 3
948	APM: HookC2 [FD057209] Port 4
949	APM: HookC3 [FD05726F] Port 5
950	19 Apr 10:19:21 AcpiDaemon LID thread is starting ID 0x4
951	0
952
953	PSD_install options:" /OS="Microsoft Windows" /VBE" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19
954	MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0
955	SS Selector fault
956	AcpiOsInitialize ALLOC size 65536 at 0xF9663000
957	AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
958	AcpiOsCreateLock F97C71A0
959	AcpiOsCreateLock F97CCB64
960	AcpiOsPredefinedOverride: "_REV"
961	AcpiOsPredefinedOverride: "_OS_"
962	AcpiOsPredefinedOverride: override to Microsoft Windows
963	AcpiOsPredefinedOverride: "_GL_"
964	AcpiOsPredefinedOverride: "_OSI"
965	* AcpiInitializeSubsystem Status = 0 *
966	ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
967	ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
968	ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
969	ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
970	ACPI: FACS @ 0x7FFF0000/0x40
971	ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
972	* AcpiInitializeTables Status = 0 *
973	AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEADA4 SIG:[DSDT]
974	* AcpiLoadTables Status = 0 *
975	Table [DSDT]
976	Table [FACS]
977	Table [FACP]
978	Table [APIC]
979	Local APIC address: FEE00000h
980	System also has 8259
981	APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
982	APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
983	APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
984	APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
985	Size of FACDT 244
986	Type of computer - Unspecified
987	System vector the SCI interrupt is wired to in 8259 mode. 9
988	System port address of the SMI Command Port 0x1048
989	The value to write to SMI_CMD to disable SMI 0x81
990	The value to write to SMI_CMD to re-enable SMI 0x80
991	The value to write to SMI_CMD to enter the S4BIOS state 0x0
992	System port address of the PM1a Event Register Block 1000
993	System port address of the PM1b Event Register Block 0
994	Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
995	System port address of the PM1a Control Register Block 1004
996	System port address of the PM1b Control Register Block 0
997	Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
998	System port address of the PM2 Control Register Block 1016
999	Number of bytes decoded by PM2_CNT_BLK 1
1000	System port address of the Power Management Timer Control Register Block 1008
1001	Number of bytes decoded by PM_TMR_BLK (=4) 4
1002	System port address of General-Purpose Event 0 Register Block 1020
1003	System port address of General-Purpose Event 1 Register Block 1030
1004	Number of bytes decoded by GPE0_BLK 0x4
1005	Number of bytes decoded by GPE1_BLK 0x4
1006	Offset within the ACPI general-purpose event model where GPE1 based events start 10
1007	GPE enable register: 4: 13
1008	GPE status register: 0: 0
1009	The worst-case hardware latency to enter and exit a C2 state 90 us
1010	The worst-case hardware latency to enter and exit a C3 state 900 us
1011	The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
1012	The RTC CMOS RAM index to the day-of-month alarm value 126
1013	The RTC CMOS RAM index to the month of year alarm value 127
1014	IA-PC Boot Architecture Flags 0x0
1015	Fixed feature flags 4A5
1016	The reset register:
1017	Type of address space - System Memory
1018	Register Bit Width 0
1019	Register Bit Offset 0
1020	Access size 0
1021	Address 0
1022	The value to write to the RESET_REG port to reset the system 0
1023	***** Throttl Width 0 Offset 1
1024	AcpiOsInstallIntterrupHandler IRQ9 handler F9803CDB
1025	** AcpiEnableSubsystem Status = 0
1026	AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1027	AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1028	** Scan EC Status = 0
1029	** AcpiInitializeObjects mask:0 Status = 0
1030	Processor [CPU0]
1031	Status 0x0 0
1032	Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
1033	Status Evaluate Processor 0x0 AE_OK
1034	Usable:1 Counter:0
1035	CPU id to N:0
1036	ProcId: 0x0
1037	P_BLK: 0x0
1038	P_BLK len: 0x0
1039	CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
1040	CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
1041	Found bridge "PCI0" BBN is absent status:5
1042	Finding:0 bridges
1043	0:0.0 Class:600 Hdr:80 Bridge H->0
1044	0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
1045	0:2.0 Class:601 Hdr:80
1046	0:2.3 Class:C00 Hdr:0
1047	0:2.5 Class:101 Hdr:0
1048	0:2.7 Class:401 Hdr:0
1049	0:3.0 Class:C03 Hdr:80
1050	0:3.1 Class:C03 Hdr:0
1051	0:3.2 Class:C03 Hdr:0
1052	0:3.3 Class:C03 Hdr:0
1053	0:4.0 Class:200 Hdr:0
1054	0:8.0 Class:480 Hdr:0
1055	0:10.0 Class:780 Hdr:0
1056	1:0.0 Class:300 Hdr:0
1057	PCI Bus scan: 2 PCI buses found.
1058	Scan ACPI tree for PCI functions
1059	0:0.0 'PCI0' (F9665C88)
1060	0:2.5 'IDEC' (F9665D60)
1061	0:6.7 'PCI1' (F9667698)
1062	0:7.7 'PCI2' (F9667710)
1063	0:8.7 'PCI3' (F9667788)
1064	0:10.7 'PCI4' (F9667800)
1065	0:2.0 'S962' (F9667878)
1066	0:3.0 'USB0' (F9667E98)
1067	0:3.1 'USB1' (F9667F48)
1068	0:3.2 'USB2' (F9667FF8)
1069	0:3.3 'USB3' (F96680A8)
1070	0:4.0 'MAC0' (F9668158)
1071	0:2.7 'AUD0' (F96681A8)
1072	0:2.6 'AMR0' (F96681F8)
1073	Bridges found:
1074	0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9665C88) _PRT
1075	0:1.0 class:604 type: 1 Bus 0->1
1076	IRQLinks found:
1077	0: 'LNKB' (F96684F0) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
1078	A[]
1079	1: 'LNKC' (F9668748) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
1080	A[]
1081	2: 'LNKD' (F96689A0) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
1082	A[]
1083	3: 'LNKA' (F9668298) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
1084	A[]
1085	4: 'LNKE' (F9668BF8) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
1086	A[]
1087	5: 'LNKF' (F9668E50) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
1088	A[]
1089	6: 'LNKG' (F96690A8) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
1090	A[]
1091	7: 'LNKH' (F9669300) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
1092	A[]
1093	PCI devices found:
1094	0:0.0 1039:648 'PCI0'
1095	0:1.0 1039:1
1096	0:2.0 1039:8 'S962'
1097	0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
1098	0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
1099	0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
1100	0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
1101	0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
1102	0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
1103	0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
1104	0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
1105	0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
1106	0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
1107	1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
1108	Bus detected - 1
1109	** AcpiInstall Power Device Status = 0
1110	ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
1111	ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
1112	** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
1113	** AcpiInstall PMTimer Device Status = 0
1114	Total use:94576 unuse:8904 count:1574
1115	Get GpeHdl Status = 0 - AE_OK
1116	Event [_L13]
1117	Install GPE0x13 Status 0x0
1118	Event [_L0E]
1119	Install GPE0xE Status 0x0
1120	Event [_L04]
1121	Install GPE0x4 Status 0x0
1122	Event [_L07]
1123	Install GPE0x7 Status 0x0
1124	Event [_L06]
1125	Install GPE0x6 Status 0x0
1126	Event [_L05]
1127	Install GPE0x5 Status 0x0
1128	Event [_L08]
1129	Install GPE0x8 Status 0x0
1130	Event [_L0F]
1131	Install GPE0xF Status 0x0
1132	Event [_L0D]
1133	Install GPE0xD Status 0x0
1134	Event [_L0B]
1135	Install GPE0xB Status 0x0
1136	Event [_L0C]
1137	Install GPE0xC Status 0x0
1138	EndScan GPE Status 0
1139	===== Info ========
1140	Int Level 9
1141	In Xrupt F966FE20 in arg F966FE20
1142	Node
1143	Name [_GPE]
1144	Flags: 0
1145	Reg count 2
1146	GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
1147	GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
1148	GPE0x6 Flag:0x2 Status - Set 0x0 Enable 0x0
1149	GPE0x7 Flag:0x2 Status - Set 0x0 Enable 0x0
1150	GPE0 Status:1020 Enable:1022 EnableWake:F0 EnableRun:0 BaseGPENumber:0
1151	GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
1152	GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
1153	GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
1154	GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
1155	GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
1156	GPE0xF Flag:0x2 Status - Set 0x0 Enable 0x0
1157	GPE1 Status:1021 Enable:1023 EnableWake:F9 EnableRun:0 BaseGPENumber:8
1158	===== Info ========
1159	Int Level 9
1160	In Xrupt F966FE20 in arg F966FF98
1161	Node
1162	Name [_GPE]
1163	Flags: 0
1164	Reg count 2
1165	GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
1166	GPE0 Status:1030 Enable:1032 EnableWake:0 EnableRun:0 BaseGPENumber:10
1167	GPE1 Status:1031 Enable:1033 EnableWake:0 EnableRun:0 BaseGPENumber:18
1168	=========== Status 0x0 0
1169	APM: PSD find success. PSD Ftable:F97C017C
1170	APM:Max C state 0
1171	Register Notify 1st FD05828D
1172	FindPCIDevice
1173	Need: B:0 D:2 F:5
1174	Finding APIC0 PIC11 Dev: [IDEC]
1175	Uniaud32: PSD find success. PSD Ftable:F97C017C
1176	FindPCIDevice
1177	Need: B:0 D:2 F:0
1178	****** Event tread *************
1179	AllocateSuspendMemory s_cpu:0
1180	Alloc s_cpu OK CPU0 2304 bytes at 0
1181	AllocSuspend: CPU0 CR3:200000
1182	Status 1Mb alloc 0
1183	19 Apr 10:19:21 acpica$ log is reading
1184	APM: Unsetting suspend state
1185	APM:Max C state 3
1186	APM: HookC2 [FD057209] Port 4
1187	APM: HookC3 [FD05726F] Port 5
1188	21 Apr 08:18:03 AcpiDaemon LID thread is starting ID 0x4
1189	0
1190
1191	PSD_install options:" /OS="Microsoft Windows" /!NOD" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19
1192	MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0
1193	SS Selector fault
1194	AcpiOsInitialize ALLOC size 65536 at 0xF9663000
1195	AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
1196	AcpiOsCreateLock F97C71A0
1197	AcpiOsCreateLock F97CCB64
1198	AcpiOsPredefinedOverride: "_REV"
1199	AcpiOsPredefinedOverride: "_OS_"
1200	AcpiOsPredefinedOverride: override to Microsoft Windows
1201	AcpiOsPredefinedOverride: "_GL_"
1202	AcpiOsPredefinedOverride: "_OSI"
1203	* AcpiInitializeSubsystem Status = 0 *
1204	ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
1205	ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1206	ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1207	ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
1208	ACPI: FACS @ 0x7FFF0000/0x40
1209	ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1210	* AcpiInitializeTables Status = 0 *
1211	AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEADA4 SIG:[DSDT]
1212	* AcpiLoadTables Status = 0 *
1213	Table [DSDT]
1214	Table [FACS]
1215	Table [FACP]
1216	Table [APIC]
1217	Local APIC address: FEE00000h
1218	System also has 8259
1219	APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
1220	APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
1221	APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
1222	APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
1223	Size of FACDT 244
1224	Type of computer - Unspecified
1225	System vector the SCI interrupt is wired to in 8259 mode. 9
1226	System port address of the SMI Command Port 0x1048
1227	The value to write to SMI_CMD to disable SMI 0x81
1228	The value to write to SMI_CMD to re-enable SMI 0x80
1229	The value to write to SMI_CMD to enter the S4BIOS state 0x0
1230	System port address of the PM1a Event Register Block 1000
1231	System port address of the PM1b Event Register Block 0
1232	Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
1233	System port address of the PM1a Control Register Block 1004
1234	System port address of the PM1b Control Register Block 0
1235	Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
1236	System port address of the PM2 Control Register Block 1016
1237	Number of bytes decoded by PM2_CNT_BLK 1
1238	System port address of the Power Management Timer Control Register Block 1008
1239	Number of bytes decoded by PM_TMR_BLK (=4) 4
1240	System port address of General-Purpose Event 0 Register Block 1020
1241	System port address of General-Purpose Event 1 Register Block 1030
1242	Number of bytes decoded by GPE0_BLK 0x4
1243	Number of bytes decoded by GPE1_BLK 0x4
1244	Offset within the ACPI general-purpose event model where GPE1 based events start 10
1245	GPE enable register: 4: 13
1246	GPE status register: 0: 0
1247	The worst-case hardware latency to enter and exit a C2 state 90 us
1248	The worst-case hardware latency to enter and exit a C3 state 900 us
1249	The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
1250	The RTC CMOS RAM index to the day-of-month alarm value 126
1251	The RTC CMOS RAM index to the month of year alarm value 127
1252	IA-PC Boot Architecture Flags 0x0
1253	Fixed feature flags 4A5
1254	The reset register:
1255	Type of address space - System Memory
1256	Register Bit Width 0
1257	Register Bit Offset 0
1258	Access size 0
1259	Address 0
1260	The value to write to the RESET_REG port to reset the system 0
1261	***** Throttl Width 0 Offset 1
1262	AcpiOsInstallIntterrupHandler IRQ9 handler F9803CDB
1263	** AcpiEnableSubsystem Status = 0
1264	AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1265	AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1266	** Scan EC Status = 0
1267	** AcpiInitializeObjects mask:0 Status = 0
1268	Processor [CPU0]
1269	Status 0x0 0
1270	Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
1271	Status Evaluate Processor 0x0 AE_OK
1272	Usable:1 Counter:0
1273	CPU id to N:0
1274	ProcId: 0x0
1275	P_BLK: 0x0
1276	P_BLK len: 0x0
1277	CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
1278	CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
1279	** AcpiInstall Power Device Status = 0
1280	ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
1281	ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
1282	** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
1283	** AcpiInstall PMTimer Device Status = 0
1284	Total use:77544 unuse:11736 count:1538
1285	Get GpeHdl Status = 0 - AE_OK
1286	Event [_L13]
1287	Install GPE0x13 Status 0x0
1288	Event [_L0E]
1289	Install GPE0xE Status 0x0
1290	Event [_L04]
1291	Install GPE0x4 Status 0x0
1292	Event [_L07]
1293	Install GPE0x7 Status 0x0
1294	Event [_L06]
1295	Install GPE0x6 Status 0x0
1296	Event [_L05]
1297	Install GPE0x5 Status 0x0
1298	Event [_L08]
1299	Install GPE0x8 Status 0x0
1300	Event [_L0F]
1301	Install GPE0xF Status 0x0
1302	Event [_L0D]
1303	Install GPE0xD Status 0x0
1304	Event [_L0B]
1305	Install GPE0xB Status 0x0
1306	Event [_L0C]
1307	Install GPE0xC Status 0x0
1308	EndScan GPE Status 0
1309	===== Info ========
1310	Int Level 9
1311	In Xrupt F966FE20 in arg F966FE20
1312	Node
1313	Name [_GPE]
1314	Flags: 0
1315	Reg count 2
1316	GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
1317	GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
1318	GPE0x6 Flag:0x2 Status - Set 0x0 Enable 0x0
1319	GPE0x7 Flag:0x2 Status - Set 0x0 Enable 0x0
1320	GPE0 Status:1020 Enable:1022 EnableWake:F0 EnableRun:0 BaseGPENumber:0
1321	GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
1322	GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
1323	GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
1324	GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
1325	GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
1326	GPE0xF Flag:0x2 Status - Set 0x0 Enable 0x0
1327	GPE1 Status:1021 Enable:1023 EnableWake:F9 EnableRun:0 BaseGPENumber:8
1328	===== Info ========
1329	Int Level 9
1330	In Xrupt F966FE20 in arg F966FF98
1331	Node
1332	Name [_GPE]
1333	Flags: 0
1334	Reg count 2
1335	GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
1336	GPE0 Status:1030 Enable:1032 EnableWake:0 EnableRun:0 BaseGPENumber:10
1337	GPE1 Status:1031 Enable:1033 EnableWake:0 EnableRun:0 BaseGPENumber:18
1338	=========== Status 0x0 0
1339	APM: PSD find success. PSD Ftable:F97C017C
1340	APM:Max C state 0
1341	Register Notify 1st FD05828D
1342	FindPCIDevice
1343	Uniaud32: PSD find success. PSD Ftable:F97C017C
1344	FindPCIDevice
1345	****** Event tread *************
1346	AllocateSuspendMemory s_cpu:0
1347	Alloc s_cpu OK CPU0 2304 bytes at 0
1348	AllocSuspend: CPU0 CR3:200000
1349	Status 1Mb alloc 0
1350	21 Apr 08:18:03 acpica$ log is reading
1351	APM: Unsetting suspend state
1352	APM:Max C state 3
1353	APM: HookC2 [FD057209] Port 4
1354	APM: HookC3 [FD05726F] Port 5
1355	21 Apr 08:21:37 acpica$ log is reading
1356	KEE Version 0x10000
1357
1358	PSD_install options:" /OS="Microsoft Windows" /!NOD" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19
1359	MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0
1360	SS Selector fault
1361	AcpiOsInitialize ALLOC size 65536 at 0xF9663000
1362	AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
1363	AcpiOsCreateLock F97C71A0
1364	AcpiOsCreateLock F97CCB64
1365	AcpiOsPredefinedOverride: "_REV"
1366	AcpiOsPredefinedOverride: "_OS_"
1367	AcpiOsPredefinedOverride: override to Microsoft Windows
1368	AcpiOsPredefinedOverride: "_GL_"
1369	AcpiOsPredefinedOverride: "_OSI"
1370	* AcpiInitializeSubsystem Status = 0 *
1371	ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
1372	ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1373	ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1374	ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
1375	ACPI: FACS @ 0x7FFF0000/0x40
1376	ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1377	* AcpiInitializeTables Status = 0 *
1378	AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEADA4 SIG:[DSDT]
1379	* AcpiLoadTables Status = 0 *
1380	Table [DSDT]
1381	Table [FACS]
1382	Table [FACP]
1383	Table [APIC]
1384	Local APIC address: FEE00000h
1385	System also has 8259
1386	APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
1387	APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
1388	APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
1389	APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
1390	Size of FACDT 244
1391	Type of computer - Unspecified
1392	System vector the SCI interrupt is wired to in 8259 mode. 9
1393	System port address of the SMI Command Port 0x1048
1394	The value to write to SMI_CMD to disable SMI 0x81
1395	The value to write to SMI_CMD to re-enable SMI 0x80
1396	The value to write to SMI_CMD to enter the S4BIOS state 0x0
1397	System port address of the PM1a Event Register Block 1000
1398	System port address of the PM1b Event Register Block 0
1399	Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
1400	System port address of the PM1a Control Register Block 1004
1401	System port address of the PM1b Control Register Block 0
1402	Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
1403	System port address of the PM2 Control Register Block 1016
1404	Number of bytes decoded by PM2_CNT_BLK 1
1405	System port address of the Power Management Timer Control Register Block 1008
1406	Number of bytes decoded by PM_TMR_BLK (=4) 4
1407	System port address of General-Purpose Event 0 Register Block 1020
1408	System port address of General-Purpose Event 1 Register Block 1030
1409	Number of bytes decoded by GPE0_BLK 0x4
1410	Number of bytes decoded by GPE1_BLK 0x4
1411	Offset within the ACPI general-purpose event model where GPE1 based events start 10
1412	GPE enable register: 4: 13
1413	GPE status register: 0: 0
1414	The worst-case hardware latency to enter and exit a C2 state 90 us
1415	The worst-case hardware latency to enter and exit a C3 state 900 us
1416	The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
1417	The RTC CMOS RAM index to the day-of-month alarm value 126
1418	The RTC CMOS RAM index to the month of year alarm value 127
1419	IA-PC Boot Architecture Flags 0x0
1420	Fixed feature flags 4A5
1421	The reset register:
1422	Type of address space - System Memory
1423	Register Bit Width 0
1424	Register Bit Offset 0
1425	Access size 0
1426	Address 0
1427	The value to write to the RESET_REG port to reset the system 0
1428	***** Throttl Width 0 Offset 1
1429	AcpiOsInstallIntterrupHandler IRQ9 handler F9803CDB
1430	** AcpiEnableSubsystem Status = 0
1431	AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1432	AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1433	** Scan EC Status = 0
1434	** AcpiInitializeObjects mask:0 Status = 0
1435	Processor [CPU0]
1436	Status 0x0 0
1437	Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
1438	Status Evaluate Processor 0x0 AE_OK
1439	Usable:1 Counter:0
1440	CPU id to N:0
1441	ProcId: 0x0
1442	P_BLK: 0x0
1443	P_BLK len: 0x0
1444	CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
1445	CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
1446	** AcpiInstall Power Device Status = 0
1447	ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
1448	ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
1449	** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
1450	** AcpiInstall PMTimer Device Status = 0
1451	Total use:77544 unuse:11736 count:1538
1452	Get GpeHdl Status = 0 - AE_OK
1453	Event [_L13]
1454	Install GPE0x13 Status 0x0
1455	Event [_L0E]
1456	Install GPE0xE Status 0x0
1457	Event [_L04]
1458	Install GPE0x4 Status 0x0
1459	Event [_L07]
1460	Install GPE0x7 Status 0x0
1461	Event [_L06]
1462	Install GPE0x6 Status 0x0
1463	Event [_L05]
1464	Install GPE0x5 Status 0x0
1465	Event [_L08]
1466	Install GPE0x8 Status 0x0
1467	Event [_L0F]
1468	Install GPE0xF Status 0x0
1469	Event [_L0D]
1470	Install GPE0xD Status 0x0
1471	Event [_L0B]
1472	Install GPE0xB Status 0x0
1473	Event [_L0C]
1474	Install GPE0xC Status 0x0
1475	EndScan GPE Status 0
1476	===== Info ========
1477	Int Level 9
1478	In Xrupt F966FE20 in arg F966FE20
1479	Node
1480	Name [_GPE]
1481	Flags: 0
1482	Reg count 2
1483	GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
1484	GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
1485	GPE0x6 Flag:0x2 Status - Set 0x0 Enable 0x0
1486	GPE0x7 Flag:0x2 Status - Set 0x0 Enable 0x0
1487	GPE0 Status:1020 Enable:1022 EnableWake:F0 EnableRun:0 BaseGPENumber:0
1488	GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
1489	GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
1490	GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
1491	GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
1492	GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
1493	GPE0xF Flag:0x2 Status - Set 0x0 Enable 0x0
1494	GPE1 Status:1021 Enable:1023 EnableWake:F9 EnableRun:0 BaseGPENumber:8
1495	===== Info ========
1496	Int Level 9
1497	In Xrupt F966FE20 in arg F966FF98
1498	Node
1499	Name [_GPE]
1500	Flags: 0
1501	Reg count 2
1502	GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
1503	GPE0 Status:1030 Enable:1032 EnableWake:0 EnableRun:0 BaseGPENumber:10
1504	GPE1 Status:1031 Enable:1033 EnableWake:0 EnableRun:0 BaseGPENumber:18
1505	=========== Status 0x0 0
1506	APM: PSD find success. PSD Ftable:F97C017C
1507	APM:Max C state 0
1508	Register Notify 1st FD05828D
1509	FindPCIDevice
1510	Uniaud32: PSD find success. PSD Ftable:F97C017C
1511	FindPCIDevice
1512	****** Event tread *************
1513	AllocateSuspendMemory s_cpu:0
1514	Alloc s_cpu OK CPU0 2304 bytes at 1
1515	AllocSuspend: CPU0 CR3:200000
1516	Status 1Mb alloc 0
1517	21 Apr 08:21:37 acpica$ log is reading
1518	APM: Unsetting suspend state
1519	APM:Max C state 3
1520	APM: HookC2 [FD057209] Port 4
1521	APM: HookC3 [FD05726F] Port 5
1522	21 Apr 20:14:24 AcpiDaemon LID thread is starting ID 0x4
1523	0
1524
1525	PSD_install options:" /PIC /!NOD /VBE" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19
1526	MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0
1527	SS Selector fault
1528	AcpiOsInitialize ALLOC size 65536 at 0xF9663000
1529	AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
1530	AcpiOsCreateLock F97C71A0
1531	AcpiOsCreateLock F97CCB64
1532	AcpiOsPredefinedOverride: "_REV"
1533	AcpiOsPredefinedOverride: "_OS_"
1534	AcpiOsPredefinedOverride: override to eComStation
1535	AcpiOsPredefinedOverride: "_GL_"
1536	AcpiOsPredefinedOverride: "_OSI"
1537	* AcpiInitializeSubsystem Status = 0 *
1538	ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
1539	ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1540	ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1541	ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
1542	ACPI: FACS @ 0x7FFF0000/0x40
1543	ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1544	* AcpiInitializeTables Status = 0 *
1545	AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEADA4 SIG:[DSDT]
1546	* AcpiLoadTables Status = 0 *
1547	Table [DSDT]
1548	Table [FACS]
1549	Table [FACP]
1550	Table [APIC]
1551	Local APIC address: FEE00000h
1552	System also has 8259
1553	APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
1554	APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
1555	APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
1556	APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
1557	Size of FACDT 244
1558	Type of computer - Unspecified
1559	System vector the SCI interrupt is wired to in 8259 mode. 9
1560	System port address of the SMI Command Port 0x1048
1561	The value to write to SMI_CMD to disable SMI 0x81
1562	The value to write to SMI_CMD to re-enable SMI 0x80
1563	The value to write to SMI_CMD to enter the S4BIOS state 0x0
1564	System port address of the PM1a Event Register Block 1000
1565	System port address of the PM1b Event Register Block 0
1566	Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
1567	System port address of the PM1a Control Register Block 1004
1568	System port address of the PM1b Control Register Block 0
1569	Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
1570	System port address of the PM2 Control Register Block 1016
1571	Number of bytes decoded by PM2_CNT_BLK 1
1572	System port address of the Power Management Timer Control Register Block 1008
1573	Number of bytes decoded by PM_TMR_BLK (=4) 4
1574	System port address of General-Purpose Event 0 Register Block 1020
1575	System port address of General-Purpose Event 1 Register Block 1030
1576	Number of bytes decoded by GPE0_BLK 0x4
1577	Number of bytes decoded by GPE1_BLK 0x4
1578	Offset within the ACPI general-purpose event model where GPE1 based events start 10
1579	GPE enable register: 4: 13
1580	GPE status register: 0: 0
1581	The worst-case hardware latency to enter and exit a C2 state 90 us
1582	The worst-case hardware latency to enter and exit a C3 state 900 us
1583	The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
1584	The RTC CMOS RAM index to the day-of-month alarm value 126
1585	The RTC CMOS RAM index to the month of year alarm value 127
1586	IA-PC Boot Architecture Flags 0x0
1587	Fixed feature flags 4A5
1588	The reset register:
1589	Type of address space - System Memory
1590	Register Bit Width 0
1591	Register Bit Offset 0
1592	Access size 0
1593	Address 0
1594	The value to write to the RESET_REG port to reset the system 0
1595	***** Throttl Width 0 Offset 1
1596	AcpiOsInstallIntterrupHandler IRQ9 handler F9803CDB
1597	** AcpiEnableSubsystem Status = 0
1598	AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1599	AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1600	** Scan EC Status = 0
1601	** AcpiInitializeObjects mask:0 Status = 0
1602	Processor [CPU0]
1603	Status 0x0 0
1604	Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
1605	Status Evaluate Processor 0x0 AE_OK
1606	Usable:1 Counter:0
1607	CPU id to N:0
1608	ProcId: 0x0
1609	P_BLK: 0x0
1610	P_BLK len: 0x0
1611	CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
1612	CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
1613	** AcpiInstall Power Device Status = 0
1614	ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
1615	ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
1616	** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
1617	** AcpiInstall PMTimer Device Status = 0
1618	Total use:77464 unuse:11376 count:1534
1619	Get GpeHdl Status = 0 - AE_OK
1620	Event [_L13]
1621	Install GPE0x13 Status 0x0
1622	Event [_L0E]
1623	Install GPE0xE Status 0x0
1624	Event [_L04]
1625	Install GPE0x4 Status 0x0
1626	Event [_L07]
1627	Install GPE0x7 Status 0x0
1628	Event [_L06]
1629	Install GPE0x6 Status 0x0
1630	Event [_L05]
1631	Install GPE0x5 Status 0x0
1632	Event [_L08]
1633	Install GPE0x8 Status 0x0
1634	Event [_L0F]
1635	Install GPE0xF Status 0x0
1636	Event [_L0D]
1637	Install GPE0xD Status 0x0
1638	Event [_L0B]
1639	Install GPE0xB Status 0x0
1640	Event [_L0C]
1641	Install GPE0xC Status 0x0
1642	EndScan GPE Status 0
1643	===== Info ========
1644	Int Level 9
1645	In Xrupt F966FE20 in arg F966FE20
1646	Node
1647	Name [_GPE]
1648	Flags: 0
1649	Reg count 2
1650	GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
1651	GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
1652	GPE0x6 Flag:0x2 Status - Set 0x0 Enable 0x0
1653	GPE0x7 Flag:0x2 Status - Set 0x0 Enable 0x0
1654	GPE0 Status:1020 Enable:1022 EnableWake:F0 EnableRun:0 BaseGPENumber:0
1655	GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
1656	GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
1657	GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
1658	GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
1659	GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
1660	GPE0xF Flag:0x2 Status - Set 0x0 Enable 0x0
1661	GPE1 Status:1021 Enable:1023 EnableWake:F9 EnableRun:0 BaseGPENumber:8
1662	===== Info ========
1663	Int Level 9
1664	In Xrupt F966FE20 in arg F966FF98
1665	Node
1666	Name [_GPE]
1667	Flags: 0
1668	Reg count 2
1669	GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
1670	GPE0 Status:1030 Enable:1032 EnableWake:0 EnableRun:0 BaseGPENumber:10
1671	GPE1 Status:1031 Enable:1033 EnableWake:0 EnableRun:0 BaseGPENumber:18
1672	=========== Status 0x0 0
1673	APM: PSD find success. PSD Ftable:F97C017C
1674	APM:Max C state 0
1675	Register Notify 1st FD05828D
1676	FindPCIDevice
1677	Uniaud32: PSD find success. PSD Ftable:F97C017C
1678	FindPCIDevice
1679	****** Event tread *************
1680	AllocateSuspendMemory s_cpu:0
1681	Alloc s_cpu OK CPU0 2304 bytes at 0
1682	AllocSuspend: CPU0 CR3:200000
1683	Status 1Mb alloc 0
1684	21 Apr 20:14:25 acpica$ log is reading
1685	APM: Unsetting suspend state
1686	APM:Max C state 3
1687	APM: HookC2 [FD057209] Port 4
1688	APM: HookC3 [FD05726F] Port 5

Download in other formats:

Original Format