| 1 | KEE Version 0x10000 |
|---|
| 2 | |
|---|
| 3 | PSD_install options:" " @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19 |
|---|
| 4 | MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 |
|---|
| 5 | New Stack = FFC20000 Size:0x8000 |
|---|
| 6 | AcpiOsInitialize ALLOC size 65536 at 0xFA020000 |
|---|
| 7 | AcpiOsInitialize MapMem size 4096 at 0xFFDEE000 |
|---|
| 8 | AcpiOsCreateLock FA0471A0 |
|---|
| 9 | AcpiOsCreateLock FA04CB64 |
|---|
| 10 | AcpiOsPredefinedOverride: "_REV" |
|---|
| 11 | AcpiOsPredefinedOverride: "_OS_" |
|---|
| 12 | AcpiOsPredefinedOverride: override to eComStation |
|---|
| 13 | AcpiOsPredefinedOverride: "_GL_" |
|---|
| 14 | AcpiOsPredefinedOverride: "_OSI" |
|---|
| 15 | *** AcpiInitializeSubsystem Status = 0 *** |
|---|
| 16 | ACPI: RSDP @ 0xF7400/0x14 (v0 IntelR) |
|---|
| 17 | ACPI: RSDT @ 0x1FFF3000/0x28 (v1 IntelR MSI ACPI 0x42302E31 AWRD 0x0) |
|---|
| 18 | ACPI: FACP @ 0x1FFF3040/0x74 (v1 IntelR MSI ACPI 0x42302E31 AWRD 0x0) |
|---|
| 19 | ACPI: DSDT @ 0x1FFF30C0/0x3454 (v1 INTELR AWRDACPI 0x1000 MSFT 0x100000C) |
|---|
| 20 | ACPI: FACS @ 0x1FFF0000/0x40 |
|---|
| 21 | *** AcpiInitializeTables Status = 0 *** |
|---|
| 22 | AcpiOsTableOverride Ex:FFC140C0 New:FFC1FFBC SIG:[DSDT] |
|---|
| 23 | *** AcpiLoadTables Status = 0 *** |
|---|
| 24 | Table [DSDT] |
|---|
| 25 | Table [FACS] |
|---|
| 26 | Table [FACP] |
|---|
| 27 | Size of FACDT 244 |
|---|
| 28 | Type of computer - Unspecified |
|---|
| 29 | System vector the SCI interrupt is wired to in 8259 mode. 9 |
|---|
| 30 | System port address of the SMI Command Port 0xB2 |
|---|
| 31 | The value to write to SMI_CMD to disable SMI 0xA1 |
|---|
| 32 | The value to write to SMI_CMD to re-enable SMI 0xA0 |
|---|
| 33 | The value to write to SMI_CMD to enter the S4BIOS state 0x0 |
|---|
| 34 | System port address of the PM1a Event Register Block 4000 |
|---|
| 35 | System port address of the PM1b Event Register Block 0 |
|---|
| 36 | Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 |
|---|
| 37 | System port address of the PM1a Control Register Block 4004 |
|---|
| 38 | System port address of the PM1b Control Register Block 0 |
|---|
| 39 | Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 |
|---|
| 40 | System port address of the PM2 Control Register Block 0 |
|---|
| 41 | System port address of the Power Management Timer Control Register Block 4008 |
|---|
| 42 | Number of bytes decoded by PM_TMR_BLK (=4) 4 |
|---|
| 43 | System port address of General-Purpose Event 0 Register Block 402C |
|---|
| 44 | System port address of General-Purpose Event 1 Register Block 4028 |
|---|
| 45 | Number of bytes decoded by GPE0_BLK 0x4 |
|---|
| 46 | Number of bytes decoded by GPE1_BLK 0x4 |
|---|
| 47 | Offset within the ACPI general-purpose event model where GPE1 based events start 10 |
|---|
| 48 | GPE enable register: 0: 10 |
|---|
| 49 | GPE status register: C0: 2 |
|---|
| 50 | The worst-case hardware latency to enter and exit a C2 state 90 us |
|---|
| 51 | The worst-case hardware latency to enter and exit a C3 state 900 us |
|---|
| 52 | The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 |
|---|
| 53 | The bit width of the processor's duty cycle setting value in the P_CNT register 1 |
|---|
| 54 | The RTC CMOS RAM index to the day-of-month alarm value 13 |
|---|
| 55 | IA-PC Boot Architecture Flags 0x0 |
|---|
| 56 | Fixed feature flags 425 |
|---|
| 57 | The reset register: |
|---|
| 58 | Type of address space - System Memory |
|---|
| 59 | Register Bit Width 0 |
|---|
| 60 | Register Bit Offset 0 |
|---|
| 61 | Access size 0 |
|---|
| 62 | Address 0 |
|---|
| 63 | The value to write to the RESET_REG port to reset the system 0 |
|---|
| 64 | ***** Throttl Width 1 Offset 1 |
|---|
| 65 | AcpiOsInstallIntterrupHandler IRQ9 handler FA073CDB |
|---|
| 66 | ** AcpiEnableSubsystem Status = 0 |
|---|
| 67 | AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0 |
|---|
| 68 | ** Scan EC Status = 0 |
|---|
| 69 | ** AcpiInitializeObjects mask:0 Status = 0 |
|---|
| 70 | Processor [CPU0] |
|---|
| 71 | Status 0x0 0 |
|---|
| 72 | ReadFile: Error open file ACPI.CFG |
|---|
| 73 | PSDFree: at 0xFA030000 success! |
|---|
| 74 | Found bridge "PCI0" BBN is absent status:5 |
|---|
| 75 | Finding:0 bridges |
|---|
| 76 | 0:0.0 Class:600 Hdr:0 Bridge H->0 |
|---|
| 77 | 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge |
|---|
| 78 | 0:30.0 Class:604 Hdr:1 Bridge 0->2 Bridge |
|---|
| 79 | 0:31.0 Class:601 Hdr:80 |
|---|
| 80 | 0:31.1 Class:101 Hdr:0 |
|---|
| 81 | 0:31.2 Class:C03 Hdr:0 |
|---|
| 82 | 0:31.3 Class:C05 Hdr:0 |
|---|
| 83 | 0:31.5 Class:401 Hdr:0 |
|---|
| 84 | 1:0.0 Class:300 Hdr:0 |
|---|
| 85 | 2:0.0 Class:C03 Hdr:80 |
|---|
| 86 | 2:0.1 Class:C03 Hdr:80 |
|---|
| 87 | 2:0.2 Class:C03 Hdr:80 |
|---|
| 88 | 2:1.0 Class:100 Hdr:0 |
|---|
| 89 | 2:2.0 Class:200 Hdr:0 |
|---|
| 90 | PCI Bus scan: 3 PCI buses found. |
|---|
| 91 | Scan ACPI tree for PCI functions |
|---|
| 92 | 0:0.0 'PCI0' (FA023720) |
|---|
| 93 | 0:30.0 'HUB0' (FA023908) |
|---|
| 94 | 0:31.0 'PX40' (FA023C08) |
|---|
| 95 | 0:31.2 'USB0' (FA024300) |
|---|
| 96 | 0:31.1 'ICHX' (FA024410) |
|---|
| 97 | 0:31.3 'PX43' (FA024F50) |
|---|
| 98 | Bridges found: |
|---|
| 99 | 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (FA023720) _PRT |
|---|
| 100 | 0:1.0 class:604 type: 1 Bus 0->1 |
|---|
| 101 | 0:30.0 class:604 type: 1 Bus 0->2 ACPI: 'HUB0' (FA023908) _PRT |
|---|
| 102 | IRQLinks found: |
|---|
| 103 | 0: 'LNKA' (FA025110) P[ 3, 4, 5, 6, 7, 10,*11, 12, 14, 15] <- 2:0.0 1:0.0 |
|---|
| 104 | A[] |
|---|
| 105 | 1: 'LNKB' (FA025368) P[ 3, 4, 5, 6, 7, 10,*11, 12, 14, 15] <- 2:1.0 2:0.1 0:31.5 0:31.3 |
|---|
| 106 | A[] |
|---|
| 107 | 2: 'LNKC' (FA0255C0) P[ 3, 4,*5, 6, 7, 10, 11, 12, 14, 15] <- 2:2.0 2:0.2 |
|---|
| 108 | A[] |
|---|
| 109 | 3: 'LNKD' (FA025818) P[ 3, 4, 5, 6, 7, 10,*11, 12, 14, 15] <- 0:31.2 |
|---|
| 110 | A[] |
|---|
| 111 | PCI devices found: |
|---|
| 112 | 0:0.0 8086:1130 'PCI0' |
|---|
| 113 | 0:1.0 8086:1131 |
|---|
| 114 | 0:30.0 8086:2418 'HUB0' |
|---|
| 115 | 0:31.0 8086:2410 'PX40' |
|---|
| 116 | 0:31.1 8086:2411 'ICHX' |
|---|
| 117 | 0:31.2 8086:2412 'USB0' IRQs: PCI:11 PIC:'LNKD':11 APIC:0 |
|---|
| 118 | 0:31.3 8086:2413 'PX43' IRQs: PCI:0 PIC:'LNKB':11 APIC:0 |
|---|
| 119 | 0:31.5 8086:2415 IRQs: PCI:11 PIC:'LNKB':11 APIC:0 |
|---|
| 120 | 1:0.0 102B:2527 IRQs: PCI:11 PIC:'LNKA':11 APIC:0 |
|---|
| 121 | 2:0.0 1106:3038 IRQs: PCI:11 PIC:'LNKA':11 APIC:0 |
|---|
| 122 | 2:0.1 1106:3038 IRQs: PCI:11 PIC:'LNKB':11 APIC:0 |
|---|
| 123 | 2:0.2 1106:3104 IRQs: PCI:5 PIC:'LNKC':5 APIC:0 |
|---|
| 124 | 2:1.0 9004:7178 IRQs: PCI:11 PIC:'LNKB':11 APIC:0 |
|---|
| 125 | 2:2.0 10B7:9200 IRQs: PCI:5 PIC:'LNKC':5 APIC:0 |
|---|
| 126 | Bus detected - 2 |
|---|
| 127 | ** AcpiInstall Power Device Status = 0 |
|---|
| 128 | ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031] |
|---|
| 129 | ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031] |
|---|
| 130 | ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE |
|---|
| 131 | ** AcpiInstall PMTimer Device Status = 0 |
|---|
| 132 | ** Total use:71624 unuse:8024 count:1222 ** |
|---|
| 133 | Get GpeHdl Status = 0 - AE_OK |
|---|
| 134 | Event [_L13] |
|---|
| 135 | Install GPE0x13 Status 0x0 |
|---|
| 136 | Event [_L1B] |
|---|
| 137 | Install GPE0x1B Status 0x0 |
|---|
| 138 | Event [_L18] |
|---|
| 139 | Install GPE0x18 Status 0x0 |
|---|
| 140 | Event [_L0C] |
|---|
| 141 | Install GPE0xC Status 0x0 |
|---|
| 142 | EndScan GPE Status 0 |
|---|
| 143 | ===== Info ======== |
|---|
| 144 | Int Level 9 |
|---|
| 145 | In Xrupt FA02BCD8 in arg FA02BCD8 |
|---|
| 146 | Node |
|---|
| 147 | Name [_GPE] |
|---|
| 148 | Flags: 0 |
|---|
| 149 | Reg count 2 |
|---|
| 150 | GPE0 Status:402C Enable:402E EnableWake:0 EnableRun:0 BaseGPENumber:0 |
|---|
| 151 | GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0 |
|---|
| 152 | GPE1 Status:402D Enable:402F EnableWake:10 EnableRun:0 BaseGPENumber:8 |
|---|
| 153 | ===== Info ======== |
|---|
| 154 | Int Level 9 |
|---|
| 155 | In Xrupt FA02BCD8 in arg FA02BE50 |
|---|
| 156 | Node |
|---|
| 157 | Name [_GPE] |
|---|
| 158 | Flags: 0 |
|---|
| 159 | Reg count 2 |
|---|
| 160 | GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 |
|---|
| 161 | GPE0 Status:4028 Enable:402A EnableWake:0 EnableRun:0 BaseGPENumber:10 |
|---|
| 162 | GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0 |
|---|
| 163 | GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 |
|---|
| 164 | GPE1 Status:4029 Enable:402B EnableWake:0 EnableRun:0 BaseGPENumber:18 |
|---|
| 165 | =========== Status 0x0 0 |
|---|
| 166 | FindPCIDevice |
|---|
| 167 | Need: B:0 D:1F F:1 |
|---|
