Ticket #35: pci.log

File pci.log, 13.9 KB (added by anonymous, 17 years ago)
Line 
1Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
2Loaded Vendor Data : "This is version 573 of this file; 10-10-2005 (D-M-Y)."
3
4PCI BIOS Version 2.10 found!
5Number of PCI Busses : 2
6PCI Characteristics : Config Mechanism 1
7
8Searching for PCI Devices using the OEMHLP$ driver
9
10 Bus 0 (PCI), Device Number 0, Device Function 0
11 Vendor 1106h VIA Technologies Inc
12 Device 3189h VT8377 Apollo KT400/A/600 CPU to PCI Bridge
13 Command 0006h (Memory Access, BusMaster)
14 Status 2230h (Has Capabilities List, Supports 66MHz, Received Master Abort,
15 Medium Timing)
16 Revision 80h, Header Type 00h, Bus Latency Timer 08h
17 Self test 00h (Self test not supported)
18 PCI Class Bridge, type PCI to HOST
19 Subsystem ID 31891106h Unknown (Generic ID)
20 Subsystem Vendor 1106h VIA Technologies Inc
21 Address 0 is a Memory Address (0-4GiB, Prefetchable) : E0000000h
22 New Capabilities List Present:
23 AGP Capability, Version 3.5 (AGP 8x and 4x, appendix register support)
24 AGP Speed(s) Supported : 4x
25 FW Transfers Supported : Yes
26 >4GiB Address Space Supported : No
27 Sideband Addressing Supported : Yes
28 AGP v3.0 Operation Mode Available : Yes
29 Isosynchronous Transactions Supported : No
30 Maximum Command Queue Length : 32 bytes
31 AGP Speed Selected : None Selected
32 FW Transfers Enabled : No
33 >4GiB Address Space Enabled : No
34 AGP Enabled : No
35 Sideband Addressing Enabled : No
36 AGP v3.0 Operation Mode : Disabled
37 Current Command Queue Length : 1 byte
38 Power Management Capability, Version 1.1
39 Does not support low power State D1 or D2
40 Does not support PME# signalling
41 Current Power State : D0 (Device operational, no power saving)
42
43 Bus 0 (PCI), Device Number 1, Device Function 0
44 Vendor 1106h VIA Technologies Inc
45 Device B198h ProSavageDDR P4X600,Apollo KT400/A/600 CPU to AGP Bridge
46 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
47 Status 2230h (Has Capabilities List, Supports 66MHz, Received Master Abort,
48 Medium Timing)
49 Revision 00h, Header Type 01h, Bus Latency Timer 00h
50 Self test 00h (Self test not supported)
51 PCI Class Bridge, type PCI to PCI
52 PCI Bridge Information:
53 Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
54 Secondary Bus Command 000Ch (ISA mapping, VGA mapping)
55 Secondary Bus Status 2220h (Supports 66MHz, Received Master Abort,
56 Medium Timing)
57 Secondary Bus Latency 00h
58 I/O Port Range Passed to Secondary Bus : C000h..CFFFh (16-bit)
59 Memory Range Passed to Secondary Bus : E2000000h..E20FFFFFh
60 Prefetchable Memory Range Passed to Secondary Bus : D0000000h..DFFFFFFFh
61 New Capabilities List Present:
62 Power Management Capability, Version 1.1
63 Supports low power State D1
64 Does not support PME# signalling
65 Current Power State : D0 (Device operational, no power saving)
66
67 Bus 0 (PCI), Device Number 11, Device Function 0
68 Vendor 10ECh Realtek Semiconductor
69 Device 8139h RT8139 (A/B/C/813x) Fast Ethernet Adapter
70 Command 0007h (I/O Access, Memory Access, BusMaster)
71 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
72 Medium Timing)
73 Revision 10h, Header Type 00h, Bus Latency Timer 20h
74 Minimum Bus Grant 20h, Maximum Bus Latency 40h
75 Self test 00h (Self test not supported)
76 PCI Class Network, type Ethernet
77 Subsystem ID 813910ECh RT8139 (A/B/C/810x) Fast Ethernet Adapter (Generic ID)
78 Subsystem Vendor 10ECh Realtek Semiconductor
79 Address 0 is an I/O Port : D000h..D0FFh
80 Address 1 is a Memory Address (0-4GiB) : E2100000h
81 System IRQ 11, INT# A
82 New Capabilities List Present:
83 Power Management Capability, Version 1.1
84 Supports low power State D1
85 Supports low power State D2
86 Supports PME# signalling from mode(s) D1, D2, D3hot
87 PME# signalling is currently enabled
88 3.3v AUX Current required : 0 mA (Self powered)
89 Current Power State : D0 (Device operational, no power saving)
90
91 Bus 0 (PCI), Device Number 16, Device Function 0
92 Vendor 1106h VIA Technologies Inc
93 Device 3038h VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
94 Command 0007h (I/O Access, Memory Access, BusMaster)
95 Status 0210h (Has Capabilities List, Medium Timing)
96 Revision 80h, Header Type 80h, Bus Latency Timer 20h
97 Self test 00h (Self test not supported)
98 Cache line size 32 Bytes (8 DWords)
99 PCI Class Serial, type USB (UHCI)
100 Subsystem ID 30381106h Unknown (Generic ID)
101 Subsystem Vendor 1106h VIA Technologies Inc
102 Address 0 is not present or not configured!
103 Address 1 is not present or not configured!
104 Address 2 is not present or not configured!
105 Address 3 is not present or not configured!
106 Address 4 is an I/O Port : D400h..D413h
107 System IRQ 5, INT# A
108 New Capabilities List Present:
109 Power Management Capability, Version 1.1
110 Supports low power State D1
111 Supports low power State D2
112 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
113 PME# signalling is currently disabled
114 3.3v AUX Current required : 375 mA
115 Current Power State : D0 (Device operational, no power saving)
116
117 Bus 0 (PCI), Device Number 16, Device Function 1
118 Vendor 1106h VIA Technologies Inc
119 Device 3038h VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
120 Command 0007h (I/O Access, Memory Access, BusMaster)
121 Status 0210h (Has Capabilities List, Medium Timing)
122 Revision 80h, Header Type 80h, Bus Latency Timer 20h
123 Self test 00h (Self test not supported)
124 Cache line size 32 Bytes (8 DWords)
125 PCI Class Serial, type USB (UHCI)
126 Subsystem ID 30381106h Unknown (Generic ID)
127 Subsystem Vendor 1106h VIA Technologies Inc
128 Address 0 is not present or not configured!
129 Address 1 is not present or not configured!
130 Address 2 is not present or not configured!
131 Address 3 is not present or not configured!
132 Address 4 is an I/O Port : D800h..D813h
133 System IRQ 5, INT# B
134 New Capabilities List Present:
135 Power Management Capability, Version 1.1
136 Supports low power State D1
137 Supports low power State D2
138 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
139 PME# signalling is currently disabled
140 3.3v AUX Current required : 375 mA
141 Current Power State : D0 (Device operational, no power saving)
142
143 Bus 0 (PCI), Device Number 16, Device Function 2
144 Vendor 1106h VIA Technologies Inc
145 Device 3038h VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
146 Command 0007h (I/O Access, Memory Access, BusMaster)
147 Status 0210h (Has Capabilities List, Medium Timing)
148 Revision 80h, Header Type 80h, Bus Latency Timer 20h
149 Self test 00h (Self test not supported)
150 Cache line size 32 Bytes (8 DWords)
151 PCI Class Serial, type USB (UHCI)
152 Subsystem ID 30381106h Unknown (Generic ID)
153 Subsystem Vendor 1106h VIA Technologies Inc
154 Address 0 is not present or not configured!
155 Address 1 is not present or not configured!
156 Address 2 is not present or not configured!
157 Address 3 is not present or not configured!
158 Address 4 is an I/O Port : DC00h..DC13h
159 System IRQ 11, INT# C
160 New Capabilities List Present:
161 Power Management Capability, Version 1.1
162 Supports low power State D1
163 Supports low power State D2
164 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
165 PME# signalling is currently disabled
166 3.3v AUX Current required : 375 mA
167 Current Power State : D0 (Device operational, no power saving)
168
169 Bus 0 (PCI), Device Number 16, Device Function 3
170 Vendor 1106h VIA Technologies Inc
171 Device 3104h VT6202/12 USB 2.0 Enhanced Host Controller
172 Command 0007h (I/O Access, Memory Access, BusMaster)
173 Status 0210h (Has Capabilities List, Medium Timing)
174 Revision 82h, Header Type 00h, Bus Latency Timer 20h
175 Self test 00h (Self test not supported)
176 Cache line size 32 Bytes (8 DWords)
177 PCI Class Serial, type USB 2.0 (EHCI)
178 Subsystem ID 31041106h VT6202 USB 2.0 Enhanced Host Controller (Generic ID)
179 Subsystem Vendor 1106h VIA Technologies Inc
180 Address 0 is a Memory Address (0-4GiB) : E2101000h
181 System IRQ 11, INT# D
182 New Capabilities List Present:
183 Power Management Capability, Version 1.1
184 Supports low power State D1
185 Supports low power State D2
186 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
187 PME# signalling is currently disabled
188 3.3v AUX Current required : 375 mA
189 Current Power State : D0 (Device operational, no power saving)
190
191 Bus 0 (PCI), Device Number 17, Device Function 0
192 Vendor 1106h VIA Technologies Inc
193 Device 3177h VT8235 PCI to ISA Bridge
194 Command 0087h (I/O Access, Memory Access, BusMaster, Wait Cycles)
195 Status 0210h (Has Capabilities List, Medium Timing)
196 Revision 00h, Header Type 80h, Bus Latency Timer 00h
197 Self test 00h (Self test not supported)
198 PCI Class Bridge, type PCI to ISA
199 Subsystem ID 31771106h Unknown (Generic ID)
200 Subsystem Vendor 1106h VIA Technologies Inc
201 New Capabilities List Present:
202 Power Management Capability, Version 1.1
203 Does not support low power State D1 or D2
204 Does not support PME# signalling
205 Current Power State : D0 (Device operational, no power saving)
206
207 Bus 0 (PCI), Device Number 17, Device Function 1
208 Vendor 1106h VIA Technologies Inc
209 Device 0571h VT82xxxx EIDE Controller (All VIA Chipsets)
210 Command 0007h (I/O Access, Memory Access, BusMaster)
211 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
212 Medium Timing)
213 Revision 06h, Header Type 00h, Bus Latency Timer 20h
214 Self test 00h (Self test not supported)
215 PCI Class Storage, type IDE (ATA)
216 PCI EIDE Controller Features :
217 BusMaster EIDE is supported
218 Primary Channel is at I/O Port 01F0h and IRQ 14
219 Secondary Channel is at I/O Port 0170h and IRQ 15
220 Subsystem ID 05711106h VT82Cxxxx EIDE Controller (All VIA Chipsets) (Generic ID)
221 Subsystem Vendor 1106h VIA Technologies Inc
222 Address 0 is not present or not configured!
223 Address 1 is not present or not configured!
224 Address 2 is not present or not configured!
225 Address 3 is not present or not configured!
226 Address 4 is an I/O Port : E000h..E007h
227 System IRQ (disabled), INT# A
228 New Capabilities List Present:
229 Power Management Capability, Version 1.1
230 Does not support low power State D1 or D2
231 Does not support PME# signalling
232 Current Power State : D0 (Device operational, no power saving)
233
234 Bus 0 (PCI), Device Number 17, Device Function 5
235 Vendor 1106h VIA Technologies Inc
236 Device 3059h VT8233/A AC'97 Enhanced Audio Controller
237 Command 0001h (I/O Access)
238 Status 0210h (Has Capabilities List, Medium Timing)
239 Revision 50h, Header Type 00h, Bus Latency Timer 00h
240 Self test 00h (Self test not supported)
241 PCI Class Multimedia, type Audio
242 Subsystem ID 45521106h VT8233 AC'97 Enhanced Audio Controller (Guess Only!)
243 Subsystem Vendor 1106h VIA Technologies Inc
244 Address 0 is an I/O Port : E400h..E4FFh
245 System IRQ 11, INT# C
246 New Capabilities List Present:
247 Power Management Capability, Version 1.1
248 Supports low power State D1
249 Supports low power State D2
250 Does not support PME# signalling
251 Current Power State : D0 (Device operational, no power saving)
252
253 Bus 1 (AGP), Device Number 0, Device Function 0
254 Vendor 1002h ATI Technologies Inc
255 Device 5960h Radeon 9250 (RV280)
256 Command 0007h (I/O Access, Memory Access, BusMaster)
257 Status 02B0h (Has Capabilities List, Supports 66MHz,
258 Supports Back-To-Back Trans., Medium Timing)
259 Revision 01h, Header Type 80h, Bus Latency Timer 20h
260 Minimum Bus Grant 08h, Maximum Bus Latency 00h
261 Self test 00h (Self test not supported)
262 Cache line size 32 Bytes (8 DWords)
263 PCI Class Display, type VGA
264 Subsystem ID 1082196Dh Unknown
265 Subsystem Vendor 196Dh Unknown
266 Address 0 is a Memory Address (0-4GiB, Prefetchable) : D0000000h
267 Address 1 is an I/O Port : C000h
268 Address 2 is a Memory Address (0-4GiB) : E2020000h
269 System IRQ 5, INT# A
270 Expansion ROM of 128 KiB decoded by this card, currently disabled
271 New Capabilities List Present:
272 AGP Capability, Version 3.0 (AGP 8x and 4x, core register support)
273 AGP Speed(s) Supported : 4x 8x
274 FW Transfers Supported : Yes
275 >4GiB Address Space Supported : No
276 Sideband Addressing Supported : Yes
277 AGP v3.0 Operation Mode Available : Yes
278 Isosynchronous Transactions Supported : No
279 Maximum Command Queue Length : 256 bytes
280 AGP Speed Selected : None Selected
281 FW Transfers Enabled : No
282 >4GiB Address Space Enabled : No
283 AGP Enabled : No
284 Sideband Addressing Enabled : Yes
285 AGP v3.0 Operation Mode : Disabled
286 Current Command Queue Length : 1 byte
287 Power Management Capability, Version 1.1
288 Supports low power State D1
289 Supports low power State D2
290 Does not support PME# signalling
291 Current Power State : D0 (Device operational, no power saving)
292
293 Bus 1 (AGP), Device Number 0, Device Function 1
294 Vendor 1002h ATI Technologies Inc
295 Device 5940h Radeon 9250 (RV280) - Secondary
296 Command 0000h (Bus Access Disabled!!)
297 Status 02B0h (Has Capabilities List, Supports 66MHz,
298 Supports Back-To-Back Trans., Medium Timing)
299 Revision 01h, Header Type 00h, Bus Latency Timer 20h
300 Minimum Bus Grant 08h, Maximum Bus Latency 00h
301 Self test 00h (Self test not supported)
302 Cache line size 32 Bytes (8 DWords)
303 PCI Class Display, type Other
304 Subsystem ID 1083196Dh Unknown
305 Subsystem Vendor 196Dh Unknown
306 Address 0 is a Memory Address (0-4GiB, Prefetchable) : D8000000h
307 Address 1 is a Memory Address (0-4GiB) : E2030000h
308 New Capabilities List Present:
309 Power Management Capability, Version 1.1
310 Supports low power State D1
311 Supports low power State D2
312 Does not support PME# signalling
313 Current Power State : D0 (Device operational, no power saving)
314
315ROM PCI IRQ routing table Tests....
316 ROM IRQ routing table found at F000h:DEA0h
317 Table Version 1.0 - OK
318 Table size 192 bytes - OK
319 Table Checksum 5Fh - OK
320 PCI Interrupt Router: VT8235 PCI to ISA Bridge
321 IRQ's dedicated to PCI : 5,11
322 The ROM PCI IRQ routing table appears to be OK.
323
324IRQ Summary: IRQs 5,11,14,15 are used by PCI devices
325Shared IRQs: IRQ 5 is shared by 3 PCI Devices
326 IRQ 11 is shared by 4 PCI Devices