Ticket #344: acpi.LOG

File acpi.LOG, 7.7 KB (added by eco, 12 years ago)
Line 
1KEE Version 0x10000
2
3PSD_install options:" " @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec  3 2008 13:41:19
4MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
5New Stack = FFC20000 Size:0x8000
6AcpiOsInitialize ALLOC size 65536 at 0xFA020000
7AcpiOsInitialize MapMem size 4096 at 0xFFDEC000
8AcpiOsCreateLock FA0471A0
9AcpiOsCreateLock FA04CB64
10AcpiOsPredefinedOverride: "_REV"
11AcpiOsPredefinedOverride: "_OS_"
12AcpiOsPredefinedOverride: override to eComStation
13AcpiOsPredefinedOverride: "_GL_"
14AcpiOsPredefinedOverride: "_OSI"
15*** AcpiInitializeSubsystem Status = 0 ***
16ACPI: RSDP @ 0xFE030/0x14 (v0 IBM   )
17ACPI: RSDT @ 0x1F7E0000/0x2C (v1 IBM    Cnote2   0x3110 IBM  0x1)
18ACPI: FACP @ 0x1F7E0054/0x74 (v1 IBM    Cnote2   0x3110 IBM  0x1)
19ACPI: DSDT @ 0x1F7E00CC/0x5C7B (v1 IBM  CNOTE2 0x3110 MSFT 0x100000C)
20ACPI: FACS @ 0x1F7E8000/0x40
21ACPI: BOOT @ 0x1F7E002C/0x28 (v1 IBM    Cnote2   0x3110 IBM  0x1)
22*** AcpiInitializeTables Status = 0 ***
23AcpiOsTableOverride Ex:FEA2D0CC New:FFC1FFBC SIG:[DSDT]
24*** AcpiLoadTables Status = 0 ***
25Table [DSDT]
26Table [FACS]
27Table [FACP]
28Table [BOOT]
29Size of FACDT 244
30Type of computer - Unspecified
31System vector the SCI interrupt is wired to in 8259 mode. 9
32System port address of the SMI Command Port 0xB2
33The value to write to SMI_CMD to disable SMI   0x55
34The value to write to SMI_CMD to re-enable SMI 0xAA
35The value to write to SMI_CMD to enter the S4BIOS state 0x77
36System port address of the PM1a Event Register Block F100
37System port address of the PM1b Event Register Block 0
38Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
39System port address of the PM1a Control Register Block F104
40System port address of the PM1b Control Register Block 0
41Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
42System port address of the PM2 Control Register Block F120
43Number of bytes decoded by PM2_CNT_BLK 1
44System port address of the Power Management Timer Control Register Block F108
45Number of bytes decoded by PM_TMR_BLK (=4) 4
46System port address of General-Purpose Event 0 Register Block F128
47System port address of General-Purpose Event 1 Register Block F12C
48Number of bytes decoded by GPE0_BLK 0x4
49Number of bytes decoded by GPE1_BLK 0x4
50Offset within the ACPI general-purpose event model where GPE1 based events start 10
51GPE enable register: 0: 0
52GPE status register: 0: 0
53The worst-case hardware latency to enter and exit a C2 state 99 us
54The worst-case hardware latency to enter and exit a C3 state 999 us
55The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 0
56The RTC CMOS RAM index to the day-of-month alarm value 13
57The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
58IA-PC Boot Architecture Flags 0x0
59Fixed feature flags AD
60The reset register:
61Type of address space - System Memory
62Register Bit Width  0
63Register Bit Offset 0
64Access size 0
65Address 0
66The value to write to the RESET_REG port to reset the system 0
67***** Throttl Width 0 Offset 0
68AcpiOsInstallIntterrupHandler IRQ9 handler FA073CDB
69** AcpiEnableSubsystem Status = 0
70AcpiOsDerivePCIID([PCI0] ,[D310],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
71Device [EC0_]
72 Set DATA to IO:[1 0x62 - 0x62 Al:0 Len:1]
73 Set Control to IO:[1 0x66 - 0x66 Al:0 Len:1]
74 Set Control to END_TAG Checksum:0
75GPE 1D EC
76Find 1 EC
77** Scan EC Status = 1
78** AcpiInstallAddressSpaceHandler N0 EC Status = 0 count 1 ECadr:FA041AAC - AE_OK
79Install GPE Status 0
80GpeSetType Status = 0 - AE_OK
81EC[0] GPE1D GpeEnable Status = 0 - AE_OK
82** AcpiInitializeObjects mask:0 Status = 0
83Processor [CPU0]
84Status 0x0 0
85ReadFile: Error open file ACPI.CFG
86Found bridge "PCI0" Addr:0x0 BBN is 0 Dev:0x0 Fun:0x0
87PSDFree: at 0xFA030000 success!
88Finding:1 bridges
890:0.0  Class:600  Hdr:0   Bridge H->0
900:2.0  Class:300  Hdr:80
910:2.1  Class:380  Hdr:80
920:29.0  Class:C03  Hdr:80
930:29.1  Class:C03  Hdr:0
940:29.2  Class:C03  Hdr:0
950:30.0  Class:604  Hdr:1   Bridge 0->1 Bridge
960:31.0  Class:601  Hdr:80
970:31.1  Class:101  Hdr:0
980:31.3  Class:C05  Hdr:0
990:31.5  Class:401  Hdr:0
1000:31.6  Class:703  Hdr:0
1011:8.0  Class:200  Hdr:0
1021:9.0  Class:607  Hdr:2   Bridge 0->0 CardBusPCI Bus scan: 2 PCI buses found.
103Scan ACPI tree for PCI functions
104AcpiOsDerivePCIID([PCI0] ,[NB00],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
1050:0.0  'PCI0' (FA0229B8)
1060:1.0  'AGP0' (FA023040)
1070:30.0  'PCI1' (FA0230B8)
1081:9.0  'OZ68' (FA0231B8)
1091:8.0  'OBLN' (FA0233E0)
1100:31.6  'OBMO' (FA0235B0)
1110:29.0  'USB0' (FA0236D8)
1120:29.1  'USB1' (FA023908)
1130:29.2  'USB2' (FA023AA0)
1140:31.0  'ICH3' (FA023C38)
1150:31.1  'IDE_' (FA0290D8)
1160:2.0  'VGA0' (FA029E80)
117Bridges found:
1180:0.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (FA0229B8) _PRT
1190:30.0  class:604  type: 1  Bus 0->1  ACPI: 'PCI1' (FA0230B8) _PRT
120IRQLinks found:
1210: 'PILA' (FA0241E8)  P[ 3, 4, 5, 6, 7, 9,*11, 12, 14, 15] <- 0:29.0 0:2.0
122                       A[]
1231: 'PILB' (FA024478)  P[ 3, 4, 5, 6, 7, 9,*11, 12, 14, 15] <- 1:9.0 0:31.6 0:31.5 0:31.3
124                       A[]
1252: 'PILD' (FA024928)  P[ 3, 4, 5, 6, 7, 9,*11, 12, 14, 15] <- 0:29.1
126                       A[]
1273: 'PILC' (FA0246D0)  P[ 3, 4, 5, 6, 7, 9,*11, 12, 14, 15] <- 0:29.2
128                       A[]
1294: 'PILE' (FA024B80)  P[ 3, 4, 5, 6, 7, 9,*11, 12, 14, 15] <- 1:8.0
130                       A[]
1315: 'PILF' (FA024DD8)  P[]
132                       A[]
133PCI devices found:
1340:0.0  8086:3575  'PCI0'
1350:2.0  8086:3577  'VGA0'  IRQs: PCI:11 PIC:'PILA':11 APIC:0
1360:2.1  8086:3577       
1370:29.0  8086:2482  'USB0'  IRQs: PCI:11 PIC:'PILA':11 APIC:0
1380:29.1  8086:2484  'USB1'  IRQs: PCI:11 PIC:'PILD':11 APIC:0
1390:29.2  8086:2487  'USB2'  IRQs: PCI:11 PIC:'PILC':11 APIC:0
1400:30.0  8086:2448  'PCI1'
1410:31.0  8086:248C  'ICH3'
1420:31.1  8086:248A  'IDE_'  IRQs: PCI:0 PIC:0 APIC:0
1430:31.3  8086:2483          IRQs: PCI:11 PIC:'PILB':11 APIC:0
1440:31.5  8086:2485          IRQs: PCI:11 PIC:'PILB':11 APIC:0
1450:31.6  8086:2486  'OBMO'  IRQs: PCI:11 PIC:'PILB':11 APIC:0
1461:8.0  8086:1031  'OBLN'  IRQs: PCI:11 PIC:'PILE':11 APIC:0
1471:9.0  104C:AC50  'OZ68'  IRQs: PCI:11 PIC:'PILB':11 APIC:0
148Bus detected - 1
149** AcpiInstall Power Device Status = 0
150ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
151ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
152** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
153** AcpiInstall PMTimer Device Status = 0
154** Total use:91240 unuse:4864 count:1628 **
155Get GpeHdl Status = 0 - AE_OK
156Event [_L03]
157Install GPE0x3  Status 0x0
158Event [_L04]
159Install GPE0x4  Status 0x0
160Event [_L05]
161Install GPE0x5  Status 0x0
162Event [_L08]
163Install GPE0x8  Status 0x0
164Event [_L0B]
165Install GPE0xB  Status 0x0
166Event [_L0C]
167Install GPE0xC  Status 0x0
168Event [_L18]
169Install GPE0x18  Status 0x0
170EndScan GPE Status 0
171===== Info ========
172Int Level 9
173In Xrupt FA02EA30 in arg FA02EA30
174      Node
175Name [_GPE]
176Flags: 0
177Reg count 2
178GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
179GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
180GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
181GPE0 Status:F128 Enable:F12A EnableWake:38 EnableRun:0 BaseGPENumber:0
182GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
183GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
184GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
185GPE1 Status:F129 Enable:F12B EnableWake:19 EnableRun:0 BaseGPENumber:8
186===== Info ========
187Int Level 9
188In Xrupt FA02EA30 in arg FA02EBA8
189      Node
190Name [_GPE]
191Flags: 0
192Reg count 2
193GPE0 Status:F12C Enable:F12E EnableWake:0 EnableRun:0 BaseGPENumber:10
194GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
195GPE0xD Flag:0x4 Status - Set 0x0 Enable 0x0
196GPE1 Status:F12D Enable:F12F EnableWake:0 EnableRun:20 BaseGPENumber:18
197=========== Status 0x0 0
198FindPCIDevice
199 Need: B:0 D:1F F:1
200Finding APIC0 PIC0 Dev: [IDE_]