Ticket #337: acpismpapicnod.log

KEE Version 0x10000

PSD_install options:" /SMP /APIC /!NOD" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jan 24 2009 09:42:27
MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
New Stack = FFD1C000 Size:0x8000
PSD_INIT ESP=0xFFD1BFD8
AcpiOsInitialize ALLOC size 65536 at 0xF8FA0000
AcpiOsInitialize MapMem size 4096 at 0xFFE9D000
AcpiOsPredefinedOverride: "_REV"
AcpiOsPredefinedOverride: "_OS_"
AcpiOsPredefinedOverride: override to eComStation
AcpiOsPredefinedOverride: "_GL_"
AcpiOsPredefinedOverride: "_OSI"
ACPI: RSDP @ 0xF7B90/0x24 (v2 ATI   )
ACPI: XSDT @ 0x7FEF3100/0x54 (v1 FSC    PC       0x42302E31 AWRD 0x0)
ACPI: FACP @ 0x7FEF6DC0/0xF4 (v3 FSC    PC       0x42302E31 AWRD 0x0)
ACPI Warning (tbfadt-626): 32/64X length mismatch in Pm1aEventBlock: 32/8 [20081204]
ACPI Warning (tbfadt-626): 32/64X length mismatch in Pm1aControlBlock: 16/8 [20081204]
ACPI Warning (tbfadt-626): 32/64X length mismatch in PmTimerBlock: 32/8 [20081204]
ACPI Warning (tbfadt-626): 32/64X length mismatch in Gpe0Block: 64/8 [20081204]
ACPI Warning (tbfadt-498): Invalid length for Pm1aEventBlock: 8, using default 32 [20081204]
ACPI Warning (tbfadt-498): Invalid length for Pm1aControlBlock: 8, using default 16 [20081204]
ACPI Warning (tbfadt-498): Invalid length for PmTimerBlock: 8, using default 32 [20081204]
ACPI: DSDT @ 0x7FEF3280/0x3AF9 (v1 FSC    PC       0x1000 MSFT 0x3000000)
ACPI: FACS @ 0x7FEF0000/0x40
ACPI: SLIC @ 0x7FEF6FC0/0x176 (v1 FSC    PC       0x42302E31 AWRD 0x0)
ACPI: SSDT @ 0x7FEF7180/0x28A (v1 FSC    PC       0x1  LTP 0x1)
ACPI: HPET @ 0x7FEF7480/0x38 (v1 FSC    PC       0x42302E31 AWRD 0x98)
ACPI: MCFG @ 0x7FEF7500/0x3C (v1 FSC    PC       0x42302E31 AWRD 0x0)
ACPI: APIC @ 0x7FEF6F00/0x68 (v1 FSC    PC       0x42302E31 AWRD 0x0)
AcpiOsTableOverride Ex:FFCFC280 New:FFD1BFAC SIG:[DSDT]
Table [DSDT]
Table [FACS]
Table [FACP]
Table [SLIC]
Table [SSDT]
Table [HPET]
Table [MCFG]
Table [APIC]
Local APIC address: FEE00000h
System also has 8259
APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable
APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Low 1 Trigger by: Level
APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
Size of FACDT 244
Type of computer - Desktop
System vector the SCI interrupt is wired to in 8259 mode. 9
System port address of the SMI Command Port 0xB0
The value to write to SMI_CMD to disable SMI   0xA1
The value to write to SMI_CMD to re-enable SMI 0xA0
The value to write to SMI_CMD to enter the S4BIOS state 0xA4
System port address of the PM1a Event Register Block 4000
System port address of the PM1b Event Register Block 0
Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
System port address of the PM1a Control Register Block 4004
System port address of the PM1b Control Register Block 0
Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
System port address of the PM2 Control Register Block 4050
Number of bytes decoded by PM2_CNT_BLK 1
System port address of the Power Management Timer Control Register Block 4008
Number of bytes decoded by PM_TMR_BLK (=4) 4
System port address of General-Purpose Event 0 Register Block 4020
System port address of General-Purpose Event 1 Register Block 0
Number of bytes decoded by GPE0_BLK 0x8
Number of bytes decoded by GPE1_BLK 0x0
Offset within the ACPI general-purpose event model where GPE1 based events start 0
GPE enable register: 0: 0: 0: 0
GPE status register: 0: 1: 0: 40
The system does not support a C2 state. 65
The system does not support a C3 state 3E9
The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
The RTC CMOS RAM index to the day-of-month alarm value 13
IA-PC Boot Architecture Flags 0x0
Fixed feature flags 1AD
The reset register:
Type of address space - System I/O
Register Bit Width  8
Register Bit Offset 0
Access size 0
Address 100
The value to write to the RESET_REG port to reset the system FE
***** Throttl Width 0 Offset 1
evxfevnt-184 [2] Enable: Transition to ACPI mode successful
evgpeblk-1120 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x9
AcpiOsInstallIntterrupHandler IRQ9 handler F8FF17ED
** Scan EC Status = 0
evgpeblk-1223 [3] EvInitializeGpeBlock: Found 5 Wake, Enabled 0 Runtime GPEs in this block
** AcpiInitializeObjects mask:0 Status = 0
Processor [CPU0]
Processor [CPU1]
Status 0x0 0

Init ACPI rc=0
IO APIC N0 Phys:0xFEC00000 Lin:0xFFDED000 InitID:0x0 ArbID:0x2 Ver:33 Lines:23
AcpiOsDerivePCIID([PCI0] ,[BAR1],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
Current IRQs line 24
IRQ0 override to IRQ2 Vector:50 Line:2
IRQ9 override to IRQ9 Vector:71 Line:9
WakeupVector Lin: FFDEC000 Phys: 6D000 IPIStack:FFDE3000 s_cpu:0
GetWakeupVector Status = 0
PIC Mask:FFFFDFFB
PSD_GET_NUM_OF_PROCS - has 2 CPU
ProcInit CPU0
LApic ID:0x0: ver 0x80050010
Max LVT=6
Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
Status Evaluate Processor 0x0 AE_OK
Usable:2 Counter:0 
 CPU id to N:0
 ProcId:     0x0
 P_BLK:      0x0
 P_BLK len:  0x0
CPU0 Status Evaluate _PCT 0x0 AE_OK
 Perf control:  0x0
 Perf status:  0x0
CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
End init CPU0 rc:0
StartProcessor: CPU1 id 1
StartProcessor: Warm Vector:18000004, BootCode.Lin:0xFFDEC000, BootCode.Phys:0x6D000
StartProcessor 1 id:1 LAPICid:1
Wait INI App Proc
Send SIPI1
StartProcessor success SIPI1
ProcInit CPU1
LApic ID:0x1000000: ver 0x80050010
Max LVT=6
End Startup code
Set HLT duration as IOdelay:0x285
Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
Status Evaluate Processor 0x0 AE_OK
Usable:2 Counter:1 
 CPU id to N:1
 ProcId:     0x1
 P_BLK:      0x0
 P_BLK len:  0x0
CPU1 Status Evaluate _PCT 0x0 AE_OK
 Perf control:  0x0
 Perf status:  0x0
CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND
End init CPU1 rc:0
UNMASK IRQ8 mask 0xFFFFDEFB Real:FFEBB8F4
ALLOC EARLYMEMINIT rc=0
UNMASK IRQ9 mask 0xFFFFDCFB Real:FFEBB8F4
** Create resource, max = 31 **
OemHlpXHandler: ACPI_START_EVENTS 3
** AcpiInstall Power Device Status = 0
ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
** AcpiInstall PMTimer Device Status = 0
** Total use:106296 unuse:11448 count:2006 **
Event [_L04]
Install GPE0x4  Status 0x0
Event [_L03]
Install GPE0x3  Status 0x0
Event [_L0B]
Install GPE0xB  Status 0x0
Event [_L1B]
Install GPE0x1B  Status 0x0
Event [_L10]
Install GPE0x10  Status 0x0
EndScan GPE Status 0
OemHlpXHandler: ACPI_START_EVENTS 4
OemHlpXHandler: CallACPI16: 4700909, CallACPI32: F8FC5AD2, ExportTable32: F9A80178
UNMASK IRQ1 mask 0xFFFFDCF9 Real:FFEBB8F4
APM: PSD find success. PSD Ftable:F9A8017C
APM:Max C state 0
Register Notify 1st FFCD96D0 
UNMASK IRQ6 mask 0xFFFFDCB9 Real:FFEBB8F4
PIC MASK IRQ6 mask:FFFFDCF9
UNMASK IRQ6 mask 0xFFFFDCB9 Real:FFEBB8F4
PIC MASK IRQ6 mask:FFFFDCF9
FindPCIDevice
FindPCIDevice
UNMASK IRQ11 mask 0xFFFFD4F9 Real:FFEBB8F4
PIC MASK IRQ11 mask:FFFFDCF9
UNMASK IRQ11 mask 0xFFFFD4F9 Real:FFEBB8F4
PIC MASK IRQ11 mask:FFFFDCF9
UNMASK IRQ11 mask 0xFFFFD4F9 Real:FFEBB8F4
PIC MASK IRQ11 mask:FFFFDCF9
UNMASK IRQ11 mask 0xFFFFD4F9 Real:FFEBB8F4
UNMASK IRQ14 mask 0xFFFF94F9 Real:FFEBB8F4
PIC MASK IRQ14 mask:FFFFD4F9
UNMASK IRQ14 mask 0xFFFF94F9 Real:FFEBB8F4
PIC MASK IRQ14 mask:FFFFD4F9
UNMASK IRQ14 mask 0xFFFF94F9 Real:FFEBB8F4
PIC MASK IRQ14 mask:FFFFD4F9
UNMASK IRQ14 mask 0xFFFF94F9 Real:FFEBB8F4
PIC MASK IRQ11 mask:FFFF9CF9
UNMASK IRQ11 mask 0xFFFF94F9 Real:FFEBB8F4
PIC MASK IRQ14 mask:FFFFD4F9
UNMASK IRQ14 mask 0xFFFF94F9 Real:FFEBB8F4
PIC MASK IRQ1 mask:FFFF94FB
UNMASK IRQ1 mask 0xFFFF94F9 Real:FFEBB8F4
UNMASK IRQ12 mask 0xFFFF84F9 Real:FFEBB8F4
Gradd: PSD find success. PSD Ftable:F9A8017C
APM: End scan power object
OemHlpXHandler: CMD_INIT_COMPLETE
ALLOC EARLYMEMINIT rc=0
===== Info ========
Int Level 9
In Xrupt F8FAFF98 in arg F8FAFF98
      Node
Name [_GPE]
Flags: 0x0
Reg count 4
GPE0x3 Type: Wake
GPE0x4 Type: Wake
GPEBlock0x0 Status:0x4020 Enable:0x4024 EnableWake:0x0 EnableRun:0x0 BaseGPENumber:0x0
GPE0xB Type: Wake
GPEBlock0x1 Status:0x4021 Enable:0x4025 EnableWake:0x0 EnableRun:0x0 BaseGPENumber:0x8
GPE0x10 Type: Wake
GPEBlock0x2 Status:0x4022 Enable:0x4026 EnableWake:0x0 EnableRun:0x0 BaseGPENumber:0x10
GPE0x1B Type: Wake
GPEBlock0x3 Status:0x4023 Enable:0x4027 EnableWake:0x0 EnableRun:0x0 BaseGPENumber:0x18
PSD_SET_ADV_INT_MODE Apic 0 IOMask FFFFFFFF Mask:FFFF84F9
Dummy 7 IDT FFDC0370 Vector 57
Dummy 2C IDT FFDC0370 Vector F3
Dummy 2B IDT FFDC0370 Vector F4
Dummy 2E IDT FFDC0370 Vector F2
Dummy 2F IDT FFDC0370 Vector 2F
PSD_SET_ADV_INT_MODE End IOMAsk:FFFFA4FD
UNMASK IRQ0 mask 0xFFFFA4FC Real:FFEBB8F4
UNMASK IRQ10 mask 0xFFFFA0FC Real:FFEBB8F4
******** Event tread ***************
AllocateSuspendMemory s_cpu:0
ALLOC EARLYMEMINIT rc=0
Alloc s_cpu OK CPU0 2304 bytes at 297
AllocSuspend: CPU0 CR3:211000
AllocSuspend: CPU1 CR3:7FE33000
Status 1Mb alloc 0
APM: Setting suspend state:1
Button KernBlock 4294967295 timeout
AcpiExecSMPFunction: disable exec
AIR CPU1 Vec:0x57 IRQ7 Mask:FFFFA0FC 
AIR CPU1 Vec:0x57 IRQ7 Mask:FFFFA0FC 
SetCPU to 0 need 0 wait 13
AcpiExecSMPFunction:Fun:0xFA21486C Ctx:FA234030 Flag:0xA00 Current CPU0
AcpiExecSMPFunction: wait CPUMask:0x3
Count:1 CPU1 FA234030
Count:2 CPU0 FA234030
CPU0 end
CPU1 end
AcpiExecSMPFunction: End