Ticket #326: myacpica.log

File myacpica.log, 13.8 KB (added by eco, 15 years ago)
Line 
127 Nov 15:47:28 acpica$ log is reading
2KEE Version 0x10000
3
4PSD_install options:" /FS /SMP /APIC /VBE" @#netlabs dot org:3.13#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Nov 27 2008 00:19:10
5MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
6New Stack = FFCA0000 Size:0x8000
7AcpiOsInitialize ALLOC size 65536 at 0xF9A8F000
8AcpiOsInitialize MapMem size 4096 at 0xFFE9C000
9AcpiOsCreateLock F9C071A0
10AcpiOsCreateLock F9C0CB64
11AcpiOsPredefinedOverride: "_REV"
12AcpiOsPredefinedOverride: "_OS_"
13AcpiOsPredefinedOverride: override to eComStation
14AcpiOsPredefinedOverride: "_GL_"
15AcpiOsPredefinedOverride: "_OSI"
16*** AcpiInitializeSubsystem Status = 0 ***
17ACPI: RSDP @ 0xFBCB0/0x24 (v2 DELL  )
18ACPI: XSDT @ 0x7F66F200/0x64 (v1 DELL   M08     0x27D80107 ASL  0x61)
19ACPI: FACP @ 0x7F66F09C/0xF4 (v4 DELL   M08     0x27D80107 ASL  0x61)
20ACPI: DSDT @ 0x7F66F800/0x53D4 (v2 INT430 SYSFexxx 0x1001 INTL 0x20050624)
21ACPI: FACS @ 0x7F67E000/0x40
22ACPI: HPET @ 0x7F66F300/0x38 (v1 DELL   M08     0x1 ASL  0x61)
23ACPI: APIC @ 0x7F66F400/0x68 (v1 DELL   M08     0x27D80107 ASL  0x47)
24ACPI: MCFG @ 0x7F66F3C0/0x3E (v16 DELL   M08     0x27D80107 ASL  0x61)
25ACPI: SLIC @ 0x7F66F49C/0x176 (v1 DELL   M08     0x27D80107 ASL  0x61)
26ACPI: OSFR @ 0x7F66EA00/0x2C (v1 DELL   M08     0x27D80107 ASL  0x61)
27ACPI: BOOT @ 0x7F66EFC0/0x28 (v1 DELL   M08     0x27D80107 ASL  0x61)
28ACPI: SSDT @ 0x7F66D9C0/0x4CC (v1 PmRef CpuPm 0x3000 INTL 0x20050624)
29*** AcpiInitializeTables Status = 0 ***
30AcpiOsTableOverride Ex:FFE81800 New:FFC9FFBC SIG:[DSDT]
31*** AcpiLoadTables Status = 0 ***
32Table [DSDT]
33Table [FACS]
34Table [FACP]
35Table [HPET]
36Table [APIC]
37Local APIC address: FEE00000h
38System also has 8259
39APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
40APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable
41APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
42APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
43APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
44APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
45APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
46Table [MCFG]
47Table [SLIC]
48Table [OSFR]
49Table [BOOT]
50Table [SSDT]
51Size of FACDT 244
52Type of computer - Mobile
53System vector the SCI interrupt is wired to in 8259 mode. 9
54System port address of the SMI Command Port 0xB2
55The value to write to SMI_CMD to disable SMI   0x70
56The value to write to SMI_CMD to re-enable SMI 0x71
57The value to write to SMI_CMD to enter the S4BIOS state 0x97
58The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0x80
59System port address of the PM1a Event Register Block 1000
60System port address of the PM1b Event Register Block 0
61Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
62System port address of the PM1a Control Register Block 1004
63System port address of the PM1b Control Register Block 0
64Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
65System port address of the PM2 Control Register Block 1020
66Number of bytes decoded by PM2_CNT_BLK 1
67System port address of the Power Management Timer Control Register Block 1008
68Number of bytes decoded by PM_TMR_BLK (=4) 4
69System port address of General-Purpose Event 0 Register Block 1028
70System port address of General-Purpose Event 1 Register Block 0
71Number of bytes decoded by GPE0_BLK 0x8
72Number of bytes decoded by GPE1_BLK 0x0
73Offset within the ACPI general-purpose event model where GPE1 based events start 0
74GPE enable register: 40: 0: 0: 1
75GPE status register: 0: 80: 42: 8
76The system does not support a C2 state. 96
77The worst-case hardware latency to enter and exit a C3 state 250 us
78The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
79The bit width of the processor's duty cycle setting value in the P_CNT register 3
80The RTC CMOS RAM index to the day-of-month alarm value 13
81The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
82IA-PC Boot Architecture Flags 0x2
83Fixed feature flags 82BD
84The reset register:
85Type of address space - System I/O
86Register Bit Width  0
87Register Bit Offset 0
88Access size 0
89Address 0
90The value to write to the RESET_REG port to reset the system 0
91***** Throttl Width 3 Offset 1
92AcpiOsInstallIntterrupHandler IRQ9 handler F8FF3BAB
93** AcpiEnableSubsystem Status = 0
94AcpiOsDerivePCIID([PCI0] ,[PIR1],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
95AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
96** Scan EC Status = 0
97AcpiOsDerivePCIID([PCI0] ,[IGDP],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
98AcpiOsDerivePCIID([PCI0] ,[MCHP],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
99AcpiOsSleep 0 ms
100** AcpiInitializeObjects mask:0 Status = 0
101Processor [CPU0]
102Processor [CPU1]
103Status 0x0 0
104Current IRQs line 24
105ACPI: SSDT @ 0x7F66DE8C/0x5E5 (v1 PmRef Cpu0Cst 0x3001 INTL 0x20050624)
106Status Evaluate Processor PDC 0x0 AE_OK
107Status Evaluate Processor 0x0 AE_OK
108Usable:2 Counter:0
109 CPU id to N:0
110 ProcId:     0x0
111 P_BLK:      0x1010
112 P_BLK len:  0x6
113CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
114CPU0 Status Evaluate _CST 0x0 AE_OK
115_CST has 3 Cstates
116 C1State control:  0x0
117 Latency: 1 uSec
118 Power consuption: 1000 mWatt
119 C2State control:  0x10
120 Latency: 1 uSec
121 Power consuption: 500 mWatt
122 C3State control:  0x30
123 Latency: 57 uSec
124 Power consuption: 100 mWatt
125ACPI: SSDT @ 0x7F66E471/0x85 (v1 PmRef Cpu1Cst 0x3000 INTL 0x20050624)
126Status Evaluate Processor PDC 0x0 AE_OK
127Status Evaluate Processor 0x0 AE_OK
128Usable:2 Counter:1
129 CPU id to N:1
130 ProcId:     0x1
131 P_BLK:      0x1010
132 P_BLK len:  0x6
133CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
134CPU1 Status Evaluate _CST 0x0 AE_OK
135_CST has 3 Cstates
136 C1State control:  0x0
137 Latency: 1 uSec
138 Power consuption: 1000 mWatt
139 C2State control:  0x10
140 Latency: 1 uSec
141 Power consuption: 500 mWatt
142 C3State control:  0x30
143 Latency: 57 uSec
144 Power consuption: 100 mWatt
145PSDFree: at 0xFE5F3000 success!
146Found bridge "PCI0" BBN is absent status:5
147Finding:0 bridges
1480:0.0  Class:600  Hdr:0   Bridge H->0
1490:2.0  Class:300  Hdr:80
1500:2.1  Class:380  Hdr:80
1510:26.0  Class:C03  Hdr:80
1520:26.1  Class:C03  Hdr:0
1530:26.7  Class:C03  Hdr:0
1540:27.0  Class:403  Hdr:0
1550:28.0  Class:604  Hdr:81   Bridge 0->9
1560:28.1  Class:604  Hdr:81   Bridge 0->11
1570:28.4  Class:604  Hdr:81   Bridge 0->12..13
1580:29.0  Class:C03  Hdr:80
1590:29.1  Class:C03  Hdr:0
1600:29.2  Class:C03  Hdr:0
1610:29.7  Class:C03  Hdr:0
1620:30.0  Class:604  Hdr:1   Bridge 0->2
1630:31.0  Class:601  Hdr:80
1640:31.1  Class:101  Hdr:0
1650:31.2  Class:101  Hdr:0
1660:31.3  Class:C05  Hdr:0
1672:9.0  Class:C00  Hdr:80
1682:9.1  Class:805  Hdr:80
1692:9.2  Class:880  Hdr:80
1702:9.3  Class:880  Hdr:80
1712:9.4  Class:880  Hdr:80
1729:0.0  Class:200  Hdr:0
17311:0.0  Class:280  Hdr:0
174PCI Bus scan: 14 PCI buses found.
175Scan ACPI tree for PCI functions
1760:0.0  'PCI0' (F9A92600)
1770:31.0  'ISAB' (F9A92760)
1780:30.0  'PCIE' (F9A93768)
1792:9.0  'CRD0' (F9A937E0)
1802:9.1  'CRD1' (F9A938E0)
1810:29.0  'USB1' (F9A93B00)
1820:29.1  'USB2' (F9A93D80)
1830:29.2  'USB3' (F9A93F80)
1840:26.0  'USB4' (F9A94180)
1850:26.1  'USB5' (F9A94380)
1860:26.7  'EHC2' (F9A94580)
1870:29.7  'EHCI' (F9A94870)
1880:31.2  'IDE0' (F9A94C00)
1890:31.1  'IDE1' (F9A964A8)
1900:27.0  'AZAL' (F9A97198)
1910:2.0  'VID_' (F9A97210)
1920:2.1  'VID2' (F9A99388)
1930:28.0  'RP01' (F9A99770)
1949:0.0  'PXS1' (F9A999E8)
1950:28.1  'RP02' (F9A99AF8)
19611:0.0  'PXS2' (F9A99D38)
1970:28.2  'RP03' (F9A99E48)
1980:28.3  'RP04' (F9A9A198)
1990:28.4  'RP05' (F9A9A4E8)
20012:0.0  'PXS5' (F9A9A728)
2010:28.5  'RP06' (F9A9A838)
202Bridges found:
2030:0.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (F9A92600) _PRT
2040:30.0  class:604  type: 1  Bus 0->2  ACPI: 'PCIE' (F9A93768) _PRT
2050:28.0  class:604  type: 1  Bus 0->9  ACPI: 'RP01' (F9A99770) _PRT
2060:28.1  class:604  type: 1  Bus 0->11  ACPI: 'RP02' (F9A99AF8) _PRT
2070:28.4  class:604  type: 1  Bus 0->12  ACPI: 'RP05' (F9A9A4E8) _PRT
208IRQLinks found:
2090: 'LNKC' (F9A9B5A0)  P[ 9, 10, 11] <- 2:9.4 2:9.3 2:9.2 2:9.1 0:31.1
210                       A[]
2111: 'LNKB' (F9A9B380)  P[ 5, 7] <- 11:0.0 0:31.3 0:31.2
212                       A[]
2132: 'LNKD' (F9A9B7C0)  P[]
214                       A[]
2153: 'LNKA' (F9A9B160)  P[ 9, 10,*11] <- 9:0.0 2:9.0 0:2.0
216                       A[]
2174: 'LNKE' (F9A9B9E0)  P[ 3, 4, 5, 6, 7, 9,*10, 11, 12, 14, 15] <- 0:29.7 0:29.0 0:26.0
218                       A[]
2195: 'LNKF' (F9A9BC00)  P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:29.1 0:27.0 0:26.1
220                       A[]
2216: 'LNKG' (F9A9BE20)  P[ 3, 4, 5, 6,*7, 9, 10, 11, 12, 14, 15] <- 0:29.2 0:26.7
222                       A[]
2237: 'LNKH' (F9A9C040)  P[]
224                       A[]
225PCI devices found:
2260:0.0  8086:2A00  'PCI0'
2270:2.0  8086:2A02  'VID_'  IRQs: PCI:11 PIC:'LNKA':11 APIC:16 Set: 16  MSI
2280:2.1  8086:2A03  'VID2'
2290:26.0  8086:2834  'USB4'  IRQs: PCI:10 PIC:'LNKE':10 APIC:20 Set: 20
2300:26.1  8086:2835  'USB5'  IRQs: PCI:9 PIC:'LNKF':9 APIC:21 Set: 21
2310:26.7  8086:283A  'EHC2'  IRQs: PCI:7 PIC:'LNKG':7 APIC:22 Set: 22
2320:27.0  8086:284B  'AZAL'  IRQs: PCI:9 PIC:'LNKF':9 APIC:21 Set: 21  MSI
2330:28.0  8086:283F  'RP01'
2340:28.1  8086:2841  'RP02'
2350:28.4  8086:2847  'RP05'
2360:29.0  8086:2830  'USB1'  IRQs: PCI:10 PIC:'LNKE':10 APIC:20 Set: 20
2370:29.1  8086:2831  'USB2'  IRQs: PCI:9 PIC:'LNKF':9 APIC:21 Set: 21
2380:29.2  8086:2832  'USB3'  IRQs: PCI:7 PIC:'LNKG':7 APIC:22 Set: 22
2390:29.7  8086:2836  'EHCI'  IRQs: PCI:10 PIC:'LNKE':10 APIC:20 Set: 20
2400:30.0  8086:2448  'PCIE'
2410:31.0  8086:2815  'ISAB'
2420:31.1  8086:2850  'IDE1'  IRQs: PCI:11 PIC:'LNKC': R 11 APIC:16 Set: 16
2430:31.2  8086:2828  'IDE0'  IRQs: PCI:10 PIC:'LNKB': R 10 APIC:17 Set: 17
2440:31.3  8086:283E          IRQs: PCI:10 PIC:'LNKB': R 10 APIC:17 Set: 17
2452:9.0  1180:832  'CRD0'  IRQs: PCI:11 PIC:'LNKA':11 APIC:16 Set: 16
2462:9.1  1180:822  'CRD1'  IRQs: PCI:5 PIC:'LNKC': R 5 APIC:18 Set: 18
2472:9.2  1180:843          IRQs: PCI:5 PIC:'LNKC': R 5 APIC:18 Set: 18
2482:9.3  1180:592          IRQs: PCI:5 PIC:'LNKC': R 5 APIC:18 Set: 18
2492:9.4  1180:852          IRQs: PCI:5 PIC:'LNKC': R 5 APIC:18 Set: 18
2509:0.0  11AB:4354  'PXS1'  IRQs: PCI:11 PIC:'LNKA':11 APIC:16 Set: 16  MSI
25111:0.0  8086:4229  'PXS2'  IRQs: PCI:11 PIC:'LNKB': R 11 APIC:17 Set: 17  MSI
252Max IRQ number in use - 22
253Bus detected - 13
254AcpiOsExecute type:2
255** AcpiInstall Power Device Status = 0
256ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
257ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
258** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
259** AcpiInstall PMTimer Device Status = 0
260** Total use:136936 unuse:13000 count:2367 **
261Get GpeHdl Status = 0 - AE_OK
262Event [_L01]
263Install GPE0x1  Status 0x0
264Event [_L17]
265Install GPE0x17  Status 0x0
266Event [_L1C]
267Install GPE0x1C  Status 0x0
268Event [_L0B]
269Install GPE0xB  Status 0x0
270Event [_L18]
271Install GPE0x18  Status 0x0
272Event [_L03]
273Install GPE0x3  Status 0x0
274Event [_L04]
275Install GPE0x4  Status 0x0
276Event [_L0C]
277Install GPE0xC  Status 0x0
278Event [_L0E]
279Install GPE0xE  Status 0x0
280Event [_L05]
281Install GPE0x5  Status 0x0
282Event [_L0D]
283Install GPE0xD  Status 0x0
284Event [_L09]
285Install GPE0x9  Status 0x0
286Event [_L06]
287Install GPE0x6  Status 0x0
288EndScan GPE Status 0
289===== Info ========
290Int Level 9
291In Xrupt F8FC5728 in arg F8FC5728
292      Node
293Name [_GPE]
294Flags: 0
295Reg count 4
296GPE0x1 Flag:0x4 Status - Set 0x0 Enable 0x0
297GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
298GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
299GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
300GPE0x6 Flag:0x4 Status - Set 0x0 Enable 0x0
301GPE0 Status:1028 Enable:102C EnableWake:38 EnableRun:42 BaseGPENumber:0
302GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0
303GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
304GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
305GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
306GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
307GPE1 Status:1029 Enable:102D EnableWake:7A EnableRun:0 BaseGPENumber:8
308GPE0x17 Flag:0x4 Status - Set 0x0 Enable 0x0
309GPE2 Status:102A Enable:102E EnableWake:0 EnableRun:80 BaseGPENumber:10
310GPE0x18 Flag:0x4 Status - Set 0x0 Enable 0x0
311GPE0x1C Flag:0x2 Status - Set 0x0 Enable 0x0
312GPE3 Status:102B Enable:102F EnableWake:10 EnableRun:1 BaseGPENumber:18
313=========== Status 0x0 0
314** GpeHandler F8FC8250 n 17 **
315AcpiOsExecute type:1
316APM: PSD find success. PSD Ftable:F9C0017C
317APM:Max C state 0
318Register Notify 1st FFC7728D
319FindPCIDevice
320 Need: B:0 D:1F F:1
321Finding APIC16 PIC11 Dev: [IDE1]
322FindPCIDevice
323 Need: B:0 D:1F F:2
324Finding APIC17 PIC10 Dev: [IDE0]
325Gradd: PSD find success. PSD Ftable:F9C0017C
326APM: Found AC "AC__"
327APM: Found Smart Battery "BAT0"
328AcpiExecSMPFunction: disable exec
329SetCPU to 0 need 0 wait 7
330AcpiExecSMPFunction:Fun:0xFA27486C Ctx:FA294030 Flag:0xA00 Current CPU0
331AcpiExecSMPFunction: wait CPUMask:0x3
332Count:1 CPU1 FA294030
333Count:2 CPU0 FA294030
334CPU1 end
335CPU0 end
336AcpiExecSMPFunction: End
337******** Event tread ***************
338AllocateSuspendMemory s_cpu:0
339Alloc s_cpu OK CPU1 2304 bytes at 0
340AllocSuspend: CPU0 CR3:211000
341AllocSuspend: CPU1 CR3:F2B000
342Status 1Mb alloc 0
343======= ACPIOSExecute 0 function ===========
344AcpiOsExecute type:1
345======= ACPIOSExecute 1 function ===========
346---- GPE 17 exec-----
347AcpiOsExecute type:1
348AcpiOsExecute type:1
349GPE 17 status 0 - AE_OK
350GPE Enable 17 status 0 - AE_OK
351======= ACPIOSExecute 2 function ===========
352======= ACPIOSExecute 3 function ===========
353*** Device Notify ***
354Dev: [CPU0] Value:80
355CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
356Calling FFC7728D
357APM: ******** Notify: 80 *********
358APM: ******** End Notify: 80 *********
359======= ACPIOSExecute 4 function ===========
360*** Device Notify ***
361Dev: [CPU1] Value:80
362CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
363Calling FFC7728D
364APM: ******** Notify: 80 *********
365APM: ******** End Notify: 80 *********
36627 Nov 15:47:28 acpica$ log is reading
367APM: Setting suspend state:3
36827 Nov 15:47:38 acpica$ log is reading
369** Notify wait Counter 0 **