Ticket #323: acpi3-smp.log

File acpi3-smp.log, 10.3 KB (added by eco, 15 years ago)

T42, SMP kernel

Line 
1KEE Version 0x10000
2@#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec  3 2008 13:41:19
3MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
4New Stack = FFD00000 Size:0x8000
5AcpiOsInitialize ALLOC size 65536 at 0xF96D0000
6AcpiOsInitialize MapMem size 4096 at 0xFFE9E000
7AcpiOsCreateLock F9C171A0
8AcpiOsCreateLock F9C1CB64
9AcpiOsPredefinedOverride: "_REV"
10AcpiOsPredefinedOverride: "_OS_"
11AcpiOsPredefinedOverride: override to eComStation
12AcpiOsPredefinedOverride: "_GL_"
13AcpiOsPredefinedOverride: "_OSI"
14*** AcpiInitializeSubsystem Status = 0 ***
15ACPI: RSDP @ 0xF6DF0/0x24 (v2 IBM   )
16ACPI: XSDT @ 0x3FF6A6CD/0x4C (v1 IBM    TP-1R    0x3130  LTP 0x0)
17ACPI: FACP @ 0x3FF6A800/0xF4 (v3 IBM    TP-1R    0x3130 IBM  0x1)
18ACPI Warning (tbfadt-543): Optional field "Gpe1Block" has zero address or length: 0102C/0 [20081031]
19ACPI: DSDT @ 0x3FF6A9E7/0xC4D5 (v1 IBM    TP-1R    0x3130 MSFT 0x100000E)
20ACPI: FACS @ 0x3FF78000/0x40
21ACPI: SSDT @ 0x3FF6A9B4/0x33 (v1 IBM    TP-1R    0x3130 MSFT 0x100000E)
22ACPI: ECDT @ 0x3FF76EBC/0x52 (v1 IBM    TP-1R    0x3130 IBM  0x1)
23ACPI: TCPA @ 0x3FF76F0E/0x32 (v1 IBM    TP-1R    0x3130 PTL  0x1)
24ACPI: BOOT @ 0x3FF76FD8/0x28 (v1 IBM    TP-1R    0x3130  LTP 0x1)
25*** AcpiInitializeTables Status = 0 ***
26AcpiOsTableOverride Ex:FFCD69E7 New:FFCFFFBC SIG:[DSDT]
27*** AcpiLoadTables Status = 0 ***
28Table [DSDT]
29Table [FACS]
30Table [FACP]
31Table [SSDT]
32Table [ECDT]
33EC Control:  66:1:8:0:0
34EC Data:     62:1:8:0:0
35UID:         0
36GPE bit:     1C
37Name in ACPI:\_SB.PCI0.LPC.EC
38Status GetHandle: 0 - AE_OK
39Table [TCPA]
40Table [BOOT]
41Size of FACDT 244
42Type of computer - Mobile
43System vector the SCI interrupt is wired to in 8259 mode. 9
44System port address of the SMI Command Port 0xB2
45The value to write to SMI_CMD to disable SMI   0xF0
46The value to write to SMI_CMD to re-enable SMI 0xF1
47The value to write to SMI_CMD to enter the S4BIOS state 0x0
48The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0xF3
49System port address of the PM1a Event Register Block 1000
50System port address of the PM1b Event Register Block 0
51Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
52System port address of the PM1a Control Register Block 1004
53System port address of the PM1b Control Register Block 0
54Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
55System port address of the PM2 Control Register Block 1020
56Number of bytes decoded by PM2_CNT_BLK 1
57System port address of the Power Management Timer Control Register Block 1008
58Number of bytes decoded by PM_TMR_BLK (=4) 4
59System port address of General-Purpose Event 0 Register Block 1028
60System port address of General-Purpose Event 1 Register Block 0
61Number of bytes decoded by GPE0_BLK 0x8
62Number of bytes decoded by GPE1_BLK 0x0
63Offset within the ACPI general-purpose event model where GPE1 based events start 0
64GPE enable register: 0: 0: 0: 10
65GPE status register: 0: 0: FF: 8
66The value OSPM writes to the SMI_CMD register to indicate OS support for the _CST object and C States Changed notification 0xF4
67The worst-case hardware latency to enter and exit a C2 state 1 us
68The worst-case hardware latency to enter and exit a C3 state 85 us
69The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
70The bit width of the processor's duty cycle setting value in the P_CNT register 3
71The RTC CMOS RAM index to the day-of-month alarm value 13
72The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
73IA-PC Boot Architecture Flags 0x3
74Fixed feature flags 2AD
75The reset register:
76Type of address space - System I/O
77Register Bit Width  8
78Register Bit Offset 0
79Access size 0
80Address 3321
81The value to write to the RESET_REG port to reset the system 6
82***** Throttl Width 3 Offset 1
83AcpiOsInstallIntterrupHandler IRQ9 handler F9703CDB
84** AcpiEnableSubsystem Status = 0
85** AcpiInstallAddressSpaceHandler N0 EC Status = 0 count 1 ECadr:F9C11AAC - AE_OK
86Install GPE Status 0
87GpeSetType Status = 0 - AE_OK
88EC[0] GPE1C GpeEnable Status = 0 - AE_OK
89AcpiOsDerivePCIID([PCI0] ,[MHCS],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
90AcpiOsDerivePCIID([PCI0] ,[LPCS],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
91AcpiEcSetup handle F96D55C0 Function 0 Count 1
92Emm Setup St:8
93Check - PSD AcpiWaitIBF Ctl=8 IBF=0
94Check - PSD AcpiWaitOBF Ctl=1 OBF=0
95Check - PSD AcpiWaitIBF Ctl=8 IBF=0
96Check - PSD AcpiWaitIBF Ctl=0 IBF=0
97Check - PSD AcpiWaitIBF Ctl=8 IBF=0
98Check - PSD AcpiWaitOBF Ctl=1 OBF=0
99Check - PSD AcpiWaitIBF Ctl=8 IBF=0
100Check - PSD AcpiWaitIBF Ctl=0 IBF=0
101Check - PSD AcpiWaitIBF Ctl=8 IBF=0
102Check - PSD AcpiWaitOBF Ctl=1 OBF=0
103Check - PSD AcpiWaitIBF Ctl=8 IBF=0
104Check - PSD AcpiWaitOBF Ctl=1 OBF=0
105Check - PSD AcpiWaitIBF Ctl=8 IBF=0
106Check - PSD AcpiWaitIBF Ctl=0 IBF=0
107Check - PSD AcpiWaitIBF Ctl=8 IBF=0
108Check - PSD AcpiWaitOBF Ctl=1 OBF=0
109Check - PSD AcpiWaitIBF Ctl=8 IBF=0
110Check - PSD AcpiWaitIBF Ctl=0 IBF=0
111Check - PSD AcpiWaitIBF Ctl=8 IBF=0
112Check - PSD AcpiWaitOBF Ctl=1 OBF=0
113Check - PSD AcpiWaitIBF Ctl=8 IBF=0
114Check - PSD AcpiWaitIBF Ctl=0 IBF=0
115AcpiOsDerivePCIID([PCI0] ,[CBUS],) Bus:0 Dev:0 Fun:0 - Derive: Bus:2 Dev:0 Fun:0
116AcpiOsDerivePCIID([PCI0] ,[CBUS],) Bus:0 Dev:0 Fun:1 - Derive: Bus:2 Dev:0 Fun:1
117AcpiOsDerivePCIID([PCI0] ,[U7CS],) Bus:0 Dev:29 Fun:7 - Derive: Bus:0 Dev:29 Fun:7
118** AcpiInitializeObjects mask:0 Status = 0
119Processor [CPU_]
120Status 0x0 0
121PSDFree: at 0xF9C00000 success!
122CFG: Link [LNKA] IRQ10
123CFG: Link [LNKB] IRQ6
124Found bridge "PCI0" Addr:0x0 BBN is 0 Dev:0x0 Fun:0x0
125AcpiWaitIBF rc=640 IBF:0
126AcpiWaitOBF rc=640 OBF:0
127AcpiWaitIBF rc=640 IBF:0
128AcpiWaitOBF rc=640 OBF:0
129Finding:1 bridges
1300:0.0  Class:600  Hdr:0   Bridge H->0
1310:1.0  Class:604  Hdr:1   Bridge 0->1 Bridge
1320:29.0  Class:C03  Hdr:80
1330:29.1  Class:C03  Hdr:0
1340:29.2  Class:C03  Hdr:0
1350:29.7  Class:C03  Hdr:0
1360:30.0  Class:604  Hdr:1   Bridge 0->2..8 Bridge
1370:31.0  Class:601  Hdr:80
1380:31.1  Class:101  Hdr:0
1390:31.3  Class:C05  Hdr:0
1400:31.5  Class:401  Hdr:0
1410:31.6  Class:703  Hdr:0
1421:0.0  Class:300  Hdr:0
1432:0.0  Class:607  Hdr:82   Bridge 2->3..5 CardBus
1442:0.1  Class:607  Hdr:82   Bridge 2->6..8 CardBus
1452:1.0  Class:200  Hdr:0
1462:2.0  Class:200  Hdr:0
147PCI Bus scan: 9 PCI buses found.
148Scan ACPI tree for PCI functions
1490:0.0  'PCI0' (F96D2E10)
1500:31.0  'LPC_' (F96D2E38)
1510:1.0  'AGP_' (F96DB4B0)
1521:0.0  'VID_' (F96DB870)
1530:30.0  'PCI1' (F96DC4A8)
1542:0.0  'CBS0' (F96DC570)
1552:0.1  'CBS1' (F96DC858)
1562:3.0  'DOCK' (F96DCB40)
1570:31.1  'IDE0' (F96DF470)
1580:29.0  'USB0' (F96C06F8)
1590:29.1  'USB1' (F96C0A30)
1600:29.2  'USB2' (F96C0C68)
1610:29.7  'USB7' (F96C0CB8)
1620:31.6  'AC9M' (F96C0FF0)
163Bridges found:
1640:0.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (F96D2E10) _PRT
1650:1.0  class:604  type: 1  Bus 0->1  ACPI: 'AGP_' (F96DB4B0) _PRT
1660:30.0  class:604  type: 1  Bus 0->2  ACPI: 'PCI1' (F96DC4A8) _PRT
1672:0.0  class:607  type: 2  Bus 2->3  ACPI: 'CBS0' (F96DC570)
1682:0.1  class:607  type: 2  Bus 2->6  ACPI: 'CBS1' (F96DC858)
169IRQLinks found:
170 Set: 10  Set: 10  Set: 10  Set: 10 0: 'LNKA' (F96D17C8)  P[ 3, 4, 5, 6, 7, 9,*10, 11] <- 2:1.0 2:0.0 1:0.0 0:29.0
171                       A[]
1721: 'LNKD' (F96D1EA0)  P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.1
173                       A[]
1742: 'LNKC' (F96D1C58)  P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 2:2.0 0:31.1 0:29.2
175                       A[]
1763: 'LNKH' (F96D27C0)  P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.7
177                       A[]
178 Set: 6  Set: 6  Set: 6  Set: 6 4: 'LNKB' (F96D1A10)  P[ 3, 4, 5,*6, 7, 9, 10, 11] <- 2:0.1 0:31.6 0:31.5 0:31.3
179                       A[]
1805: 'LNKE' (F96D20E8)  P[]
181                       A[]
182PCI devices found:
1830:0.0  8086:3340  'PCI0'
1840:1.0  8086:3341  'AGP_'
1850:29.0  8086:24C2  'USB0'  IRQs: PCI:11 PIC:'LNKA':11 APIC:0
1860:29.1  8086:24C4  'USB1'  IRQs: PCI:11 PIC:'LNKD':11 APIC:0
1870:29.2  8086:24C7  'USB2'  IRQs: PCI:11 PIC:'LNKC':11 APIC:0
1880:29.7  8086:24CD  'USB7'  IRQs: PCI:11 PIC:'LNKH':11 APIC:0
1890:30.0  8086:2448  'PCI1'
1900:31.0  8086:24CC  'LPC_'
1910:31.1  8086:24CA  'IDE0'  IRQs: PCI:0 PIC:'LNKC':11 APIC:0
1920:31.3  8086:24C3          IRQs: PCI:11 PIC:'LNKB':11 APIC:0
1930:31.5  8086:24C5          IRQs: PCI:11 PIC:'LNKB':11 APIC:0
1940:31.6  8086:24C6  'AC9M'  IRQs: PCI:11 PIC:'LNKB':11 APIC:0
1951:0.0  1002:4C57  'VID_'  IRQs: PCI:11 PIC:'LNKA':11 APIC:0
1962:0.0  104C:AC46  'CBS0'  IRQs: PCI:11 PIC:'LNKA':11 APIC:0
1972:0.1  104C:AC46  'CBS1'  IRQs: PCI:11 PIC:'LNKB':11 APIC:0
1982:1.0  8086:101E          IRQs: PCI:11 PIC:'LNKA':11 APIC:0
1992:2.0  168C:13          IRQs: PCI:11 PIC:'LNKC':11 APIC:0
200Bus detected - 8
201** AcpiInstall Power Device Status = 0
202ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
203ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
204** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
205** AcpiInstall PMTimer Device Status = 0
206** Total use:203392 unuse:9872 count:3860 **
207Get GpeHdl Status = 0 - AE_OK
208Event [_L18]
209Install GPE0x18  Status 0x0
210EndScan GPE Status 0
211===== Info ========
212Int Level 9
213In Xrupt F96B3C60 in arg F96B3C60
214      Node
215Name [_GPE]
216Flags: 0
217Reg count 4
218GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
219GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
220GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
221GPE0 Status:1028 Enable:102C EnableWake:38 EnableRun:0 BaseGPENumber:0
222GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
223GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
224GPE1 Status:1029 Enable:102D EnableWake:28 EnableRun:0 BaseGPENumber:8
225GPE2 Status:102A Enable:102E EnableWake:0 EnableRun:0 BaseGPENumber:10
226GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0
227GPE0x1C Flag:0x4 Status - Set 0x0 Enable 0x0
228GPE0x1D Flag:0x2 Status - Set 0x0 Enable 0x0
229GPE3 Status:102B Enable:102F EnableWake:21 EnableRun:10 BaseGPENumber:18
230=========== Status 0x0 0
231APM: PSD find success. PSD Ftable:F9C1017C
232APM:Max C state 0
233Register Notify 1st FFCF528D
234FindPCIDevice
235 Need: B:0 D:1F F:1
236Finding APIC0 PIC11 Dev: [IDE0]
237Uniaud32: PSD find success. PSD Ftable:F9C1017C
238FindPCIDevice
239 Need: B:0 D:1F F:0
240APM: Found Smart Battery "BAT0"
241APM: Found Smart Battery "BAT1"
242APM: Unknown design capacity
243APM: Found AC "AC__"
244******** Event tread ***************
245AllocateSuspendMemory s_cpu:0
246Alloc s_cpu OK CPU0 2304 bytes at 0
247AllocSuspend: CPU0 CR3:211000
248Status 1Mb alloc 0
249APM: Unsetting suspend state
250Check - IRQ AcpiWaitOBF Ctl=9 OBF=1
251EC arm "_Q1E" N:0 Cur:0