| 1 | KEE Version 0x10000
|
|---|
| 2 | @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19
|
|---|
| 3 | MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
|
|---|
| 4 | New Stack = FFD00000 Size:0x8000
|
|---|
| 5 | AcpiOsInitialize ALLOC size 65536 at 0xF96D0000
|
|---|
| 6 | AcpiOsInitialize MapMem size 4096 at 0xFFE9E000
|
|---|
| 7 | AcpiOsCreateLock F9C171A0
|
|---|
| 8 | AcpiOsCreateLock F9C1CB64
|
|---|
| 9 | AcpiOsPredefinedOverride: "_REV"
|
|---|
| 10 | AcpiOsPredefinedOverride: "_OS_"
|
|---|
| 11 | AcpiOsPredefinedOverride: override to eComStation
|
|---|
| 12 | AcpiOsPredefinedOverride: "_GL_"
|
|---|
| 13 | AcpiOsPredefinedOverride: "_OSI"
|
|---|
| 14 | *** AcpiInitializeSubsystem Status = 0 ***
|
|---|
| 15 | ACPI: RSDP @ 0xF6DF0/0x24 (v2 IBM )
|
|---|
| 16 | ACPI: XSDT @ 0x3FF6A6CD/0x4C (v1 IBM TP-1R 0x3130 LTP 0x0)
|
|---|
| 17 | ACPI: FACP @ 0x3FF6A800/0xF4 (v3 IBM TP-1R 0x3130 IBM 0x1)
|
|---|
| 18 | ACPI Warning (tbfadt-543): Optional field "Gpe1Block" has zero address or length: 0102C/0 [20081031]
|
|---|
| 19 | ACPI: DSDT @ 0x3FF6A9E7/0xC4D5 (v1 IBM TP-1R 0x3130 MSFT 0x100000E)
|
|---|
| 20 | ACPI: FACS @ 0x3FF78000/0x40
|
|---|
| 21 | ACPI: SSDT @ 0x3FF6A9B4/0x33 (v1 IBM TP-1R 0x3130 MSFT 0x100000E)
|
|---|
| 22 | ACPI: ECDT @ 0x3FF76EBC/0x52 (v1 IBM TP-1R 0x3130 IBM 0x1)
|
|---|
| 23 | ACPI: TCPA @ 0x3FF76F0E/0x32 (v1 IBM TP-1R 0x3130 PTL 0x1)
|
|---|
| 24 | ACPI: BOOT @ 0x3FF76FD8/0x28 (v1 IBM TP-1R 0x3130 LTP 0x1)
|
|---|
| 25 | *** AcpiInitializeTables Status = 0 ***
|
|---|
| 26 | AcpiOsTableOverride Ex:FFCD69E7 New:FFCFFFBC SIG:[DSDT]
|
|---|
| 27 | *** AcpiLoadTables Status = 0 ***
|
|---|
| 28 | Table [DSDT]
|
|---|
| 29 | Table [FACS]
|
|---|
| 30 | Table [FACP]
|
|---|
| 31 | Table [SSDT]
|
|---|
| 32 | Table [ECDT]
|
|---|
| 33 | EC Control: 66:1:8:0:0
|
|---|
| 34 | EC Data: 62:1:8:0:0
|
|---|
| 35 | UID: 0
|
|---|
| 36 | GPE bit: 1C
|
|---|
| 37 | Name in ACPI:\_SB.PCI0.LPC.EC
|
|---|
| 38 | Status GetHandle: 0 - AE_OK
|
|---|
| 39 | Table [TCPA]
|
|---|
| 40 | Table [BOOT]
|
|---|
| 41 | Size of FACDT 244
|
|---|
| 42 | Type of computer - Mobile
|
|---|
| 43 | System vector the SCI interrupt is wired to in 8259 mode. 9
|
|---|
| 44 | System port address of the SMI Command Port 0xB2
|
|---|
| 45 | The value to write to SMI_CMD to disable SMI 0xF0
|
|---|
| 46 | The value to write to SMI_CMD to re-enable SMI 0xF1
|
|---|
| 47 | The value to write to SMI_CMD to enter the S4BIOS state 0x0
|
|---|
| 48 | The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0xF3
|
|---|
| 49 | System port address of the PM1a Event Register Block 1000
|
|---|
| 50 | System port address of the PM1b Event Register Block 0
|
|---|
| 51 | Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
|
|---|
| 52 | System port address of the PM1a Control Register Block 1004
|
|---|
| 53 | System port address of the PM1b Control Register Block 0
|
|---|
| 54 | Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
|
|---|
| 55 | System port address of the PM2 Control Register Block 1020
|
|---|
| 56 | Number of bytes decoded by PM2_CNT_BLK 1
|
|---|
| 57 | System port address of the Power Management Timer Control Register Block 1008
|
|---|
| 58 | Number of bytes decoded by PM_TMR_BLK (=4) 4
|
|---|
| 59 | System port address of General-Purpose Event 0 Register Block 1028
|
|---|
| 60 | System port address of General-Purpose Event 1 Register Block 0
|
|---|
| 61 | Number of bytes decoded by GPE0_BLK 0x8
|
|---|
| 62 | Number of bytes decoded by GPE1_BLK 0x0
|
|---|
| 63 | Offset within the ACPI general-purpose event model where GPE1 based events start 0
|
|---|
| 64 | GPE enable register: 0: 0: 0: 10
|
|---|
| 65 | GPE status register: 0: 0: FF: 8
|
|---|
| 66 | The value OSPM writes to the SMI_CMD register to indicate OS support for the _CST object and C States Changed notification 0xF4
|
|---|
| 67 | The worst-case hardware latency to enter and exit a C2 state 1 us
|
|---|
| 68 | The worst-case hardware latency to enter and exit a C3 state 85 us
|
|---|
| 69 | The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
|
|---|
| 70 | The bit width of the processor's duty cycle setting value in the P_CNT register 3
|
|---|
| 71 | The RTC CMOS RAM index to the day-of-month alarm value 13
|
|---|
| 72 | The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
|
|---|
| 73 | IA-PC Boot Architecture Flags 0x3
|
|---|
| 74 | Fixed feature flags 2AD
|
|---|
| 75 | The reset register:
|
|---|
| 76 | Type of address space - System I/O
|
|---|
| 77 | Register Bit Width 8
|
|---|
| 78 | Register Bit Offset 0
|
|---|
| 79 | Access size 0
|
|---|
| 80 | Address 3321
|
|---|
| 81 | The value to write to the RESET_REG port to reset the system 6
|
|---|
| 82 | ***** Throttl Width 3 Offset 1
|
|---|
| 83 | AcpiOsInstallIntterrupHandler IRQ9 handler F9703CDB
|
|---|
| 84 | ** AcpiEnableSubsystem Status = 0
|
|---|
| 85 | ** AcpiInstallAddressSpaceHandler N0 EC Status = 0 count 1 ECadr:F9C11AAC - AE_OK
|
|---|
| 86 | Install GPE Status 0
|
|---|
| 87 | GpeSetType Status = 0 - AE_OK
|
|---|
| 88 | EC[0] GPE1C GpeEnable Status = 0 - AE_OK
|
|---|
| 89 | AcpiOsDerivePCIID([PCI0] ,[MHCS],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
|
|---|
| 90 | AcpiOsDerivePCIID([PCI0] ,[LPCS],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
|
|---|
| 91 | AcpiEcSetup handle F96D55C0 Function 0 Count 1
|
|---|
| 92 | Emm Setup St:8
|
|---|
| 93 | Check - PSD AcpiWaitIBF Ctl=8 IBF=0
|
|---|
| 94 | Check - PSD AcpiWaitOBF Ctl=1 OBF=0
|
|---|
| 95 | Check - PSD AcpiWaitIBF Ctl=8 IBF=0
|
|---|
| 96 | Check - PSD AcpiWaitIBF Ctl=0 IBF=0
|
|---|
| 97 | Check - PSD AcpiWaitIBF Ctl=8 IBF=0
|
|---|
| 98 | Check - PSD AcpiWaitOBF Ctl=1 OBF=0
|
|---|
| 99 | Check - PSD AcpiWaitIBF Ctl=8 IBF=0
|
|---|
| 100 | Check - PSD AcpiWaitIBF Ctl=0 IBF=0
|
|---|
| 101 | Check - PSD AcpiWaitIBF Ctl=8 IBF=0
|
|---|
| 102 | Check - PSD AcpiWaitOBF Ctl=1 OBF=0
|
|---|
| 103 | Check - PSD AcpiWaitIBF Ctl=8 IBF=0
|
|---|
| 104 | Check - PSD AcpiWaitOBF Ctl=1 OBF=0
|
|---|
| 105 | Check - PSD AcpiWaitIBF Ctl=8 IBF=0
|
|---|
| 106 | Check - PSD AcpiWaitIBF Ctl=0 IBF=0
|
|---|
| 107 | Check - PSD AcpiWaitIBF Ctl=8 IBF=0
|
|---|
| 108 | Check - PSD AcpiWaitOBF Ctl=1 OBF=0
|
|---|
| 109 | Check - PSD AcpiWaitIBF Ctl=8 IBF=0
|
|---|
| 110 | Check - PSD AcpiWaitIBF Ctl=0 IBF=0
|
|---|
| 111 | Check - PSD AcpiWaitIBF Ctl=8 IBF=0
|
|---|
| 112 | Check - PSD AcpiWaitOBF Ctl=1 OBF=0
|
|---|
| 113 | Check - PSD AcpiWaitIBF Ctl=8 IBF=0
|
|---|
| 114 | Check - PSD AcpiWaitIBF Ctl=0 IBF=0
|
|---|
| 115 | AcpiOsDerivePCIID([PCI0] ,[CBUS],) Bus:0 Dev:0 Fun:0 - Derive: Bus:2 Dev:0 Fun:0
|
|---|
| 116 | AcpiOsDerivePCIID([PCI0] ,[CBUS],) Bus:0 Dev:0 Fun:1 - Derive: Bus:2 Dev:0 Fun:1
|
|---|
| 117 | AcpiOsDerivePCIID([PCI0] ,[U7CS],) Bus:0 Dev:29 Fun:7 - Derive: Bus:0 Dev:29 Fun:7
|
|---|
| 118 | ** AcpiInitializeObjects mask:0 Status = 0
|
|---|
| 119 | Processor [CPU_]
|
|---|
| 120 | Status 0x0 0
|
|---|
| 121 | CFG: Link [LNKA] IRQ10
|
|---|
| 122 | CFG: Link [LNKB] IRQ6
|
|---|
| 123 | PSDFree: at 0xF9C00000 success!
|
|---|
| 124 | Found bridge "PCI0" Addr:0x0 BBN is 0 Dev:0x0 Fun:0x0
|
|---|
| 125 | AcpiWaitIBF rc=640 IBF:0
|
|---|
| 126 | AcpiWaitOBF rc=640 OBF:0
|
|---|
| 127 | AcpiWaitIBF rc=640 IBF:0
|
|---|
| 128 | AcpiWaitOBF rc=640 OBF:0
|
|---|
| 129 | Finding:1 bridges
|
|---|
| 130 | 0:0.0 Class:600 Hdr:0 Bridge H->0
|
|---|
| 131 | 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
|
|---|
| 132 | 0:29.0 Class:C03 Hdr:80
|
|---|
| 133 | 0:29.1 Class:C03 Hdr:0
|
|---|
| 134 | 0:29.2 Class:C03 Hdr:0
|
|---|
| 135 | 0:29.7 Class:C03 Hdr:0
|
|---|
| 136 | 0:30.0 Class:604 Hdr:1 Bridge 0->2..8 Bridge
|
|---|
| 137 | 0:31.0 Class:601 Hdr:80
|
|---|
| 138 | 0:31.1 Class:101 Hdr:0
|
|---|
| 139 | 0:31.3 Class:C05 Hdr:0
|
|---|
| 140 | 0:31.5 Class:401 Hdr:0
|
|---|
| 141 | 0:31.6 Class:703 Hdr:0
|
|---|
| 142 | 1:0.0 Class:300 Hdr:0
|
|---|
| 143 | 2:0.0 Class:607 Hdr:82 Bridge 2->3..5 CardBus
|
|---|
| 144 | 2:0.1 Class:607 Hdr:82 Bridge 2->6..8 CardBus
|
|---|
| 145 | 2:1.0 Class:200 Hdr:0
|
|---|
| 146 | 2:2.0 Class:200 Hdr:0
|
|---|
| 147 | PCI Bus scan: 9 PCI buses found.
|
|---|
| 148 | Scan ACPI tree for PCI functions
|
|---|
| 149 | 0:0.0 'PCI0' (F96D2E10)
|
|---|
| 150 | 0:31.0 'LPC_' (F96D2E38)
|
|---|
| 151 | 0:1.0 'AGP_' (F96DB4B0)
|
|---|
| 152 | 1:0.0 'VID_' (F96DB870)
|
|---|
| 153 | 0:30.0 'PCI1' (F96DC4A8)
|
|---|
| 154 | 2:0.0 'CBS0' (F96DC570)
|
|---|
| 155 | 2:0.1 'CBS1' (F96DC858)
|
|---|
| 156 | 2:3.0 'DOCK' (F96DCB40)
|
|---|
| 157 | 0:31.1 'IDE0' (F96DF470)
|
|---|
| 158 | 0:29.0 'USB0' (F96C06F8)
|
|---|
| 159 | 0:29.1 'USB1' (F96C0A30)
|
|---|
| 160 | 0:29.2 'USB2' (F96C0C68)
|
|---|
| 161 | 0:29.7 'USB7' (F96C0CB8)
|
|---|
| 162 | 0:31.6 'AC9M' (F96C0FF0)
|
|---|
| 163 | Bridges found:
|
|---|
| 164 | 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96D2E10) _PRT
|
|---|
| 165 | 0:1.0 class:604 type: 1 Bus 0->1 ACPI: 'AGP_' (F96DB4B0) _PRT
|
|---|
| 166 | 0:30.0 class:604 type: 1 Bus 0->2 ACPI: 'PCI1' (F96DC4A8) _PRT
|
|---|
| 167 | 2:0.0 class:607 type: 2 Bus 2->3 ACPI: 'CBS0' (F96DC570)
|
|---|
| 168 | 2:0.1 class:607 type: 2 Bus 2->6 ACPI: 'CBS1' (F96DC858)
|
|---|
| 169 | IRQLinks found:
|
|---|
| 170 | Set: 10 Set: 10 Set: 10 Set: 10 0: 'LNKA' (F96D17C8) P[ 3, 4, 5, 6, 7, 9,*10, 11] <- 2:1.0 2:0.0 1:0.0 0:29.0
|
|---|
| 171 | A[]
|
|---|
| 172 | 1: 'LNKD' (F96D1EA0) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.1
|
|---|
| 173 | A[]
|
|---|
| 174 | 2: 'LNKC' (F96D1C58) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 2:2.0 0:31.1 0:29.2
|
|---|
| 175 | A[]
|
|---|
| 176 | 3: 'LNKH' (F96D27C0) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.7
|
|---|
| 177 | A[]
|
|---|
| 178 | Set: 6 Set: 6 Set: 6 Set: 6 4: 'LNKB' (F96D1A10) P[ 3, 4, 5,*6, 7, 9, 10, 11] <- 2:0.1 0:31.6 0:31.5 0:31.3
|
|---|
| 179 | A[]
|
|---|
| 180 | 5: 'LNKE' (F96D20E8) P[]
|
|---|
| 181 | A[]
|
|---|
| 182 | PCI devices found:
|
|---|
| 183 | 0:0.0 8086:3340 'PCI0'
|
|---|
| 184 | 0:1.0 8086:3341 'AGP_'
|
|---|
| 185 | 0:29.0 8086:24C2 'USB0' IRQs: PCI:11 PIC:'LNKA':11 APIC:0
|
|---|
| 186 | 0:29.1 8086:24C4 'USB1' IRQs: PCI:11 PIC:'LNKD':11 APIC:0
|
|---|
| 187 | 0:29.2 8086:24C7 'USB2' IRQs: PCI:11 PIC:'LNKC':11 APIC:0
|
|---|
| 188 | 0:29.7 8086:24CD 'USB7' IRQs: PCI:11 PIC:'LNKH':11 APIC:0
|
|---|
| 189 | 0:30.0 8086:2448 'PCI1'
|
|---|
| 190 | 0:31.0 8086:24CC 'LPC_'
|
|---|
| 191 | 0:31.1 8086:24CA 'IDE0' IRQs: PCI:0 PIC:'LNKC':11 APIC:0
|
|---|
| 192 | 0:31.3 8086:24C3 IRQs: PCI:11 PIC:'LNKB':11 APIC:0
|
|---|
| 193 | 0:31.5 8086:24C5 IRQs: PCI:11 PIC:'LNKB':11 APIC:0
|
|---|
| 194 | 0:31.6 8086:24C6 'AC9M' IRQs: PCI:11 PIC:'LNKB':11 APIC:0
|
|---|
| 195 | 1:0.0 1002:4C57 'VID_' IRQs: PCI:11 PIC:'LNKA':11 APIC:0
|
|---|
| 196 | 2:0.0 104C:AC46 'CBS0' IRQs: PCI:11 PIC:'LNKA':11 APIC:0
|
|---|
| 197 | 2:0.1 104C:AC46 'CBS1' IRQs: PCI:11 PIC:'LNKB':11 APIC:0
|
|---|
| 198 | 2:1.0 8086:101E IRQs: PCI:11 PIC:'LNKA':11 APIC:0
|
|---|
| 199 | 2:2.0 168C:13 IRQs: PCI:11 PIC:'LNKC':11 APIC:0
|
|---|
| 200 | Bus detected - 8
|
|---|
| 201 | ** AcpiInstall Power Device Status = 0
|
|---|
| 202 | ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
|
|---|
| 203 | ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
|
|---|
| 204 | ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
|
|---|
| 205 | ** AcpiInstall PMTimer Device Status = 0
|
|---|
| 206 | ** Total use:203392 unuse:9872 count:3860 **
|
|---|
| 207 | Get GpeHdl Status = 0 - AE_OK
|
|---|
| 208 | Event [_L18]
|
|---|
| 209 | Install GPE0x18 Status 0x0
|
|---|
| 210 | EndScan GPE Status 0
|
|---|
| 211 | ===== Info ========
|
|---|
| 212 | Int Level 9
|
|---|
| 213 | In Xrupt F96B3C60 in arg F96B3C60
|
|---|
| 214 | Node
|
|---|
| 215 | Name [_GPE]
|
|---|
| 216 | Flags: 0
|
|---|
| 217 | Reg count 4
|
|---|
| 218 | GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
|
|---|
| 219 | GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
|
|---|
| 220 | GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
|
|---|
| 221 | GPE0 Status:1028 Enable:102C EnableWake:38 EnableRun:0 BaseGPENumber:0
|
|---|
| 222 | GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
|
|---|
| 223 | GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
|
|---|
| 224 | GPE1 Status:1029 Enable:102D EnableWake:28 EnableRun:0 BaseGPENumber:8
|
|---|
| 225 | GPE2 Status:102A Enable:102E EnableWake:0 EnableRun:0 BaseGPENumber:10
|
|---|
| 226 | GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0
|
|---|
| 227 | GPE0x1C Flag:0x4 Status - Set 0x0 Enable 0x0
|
|---|
| 228 | GPE0x1D Flag:0x2 Status - Set 0x0 Enable 0x0
|
|---|
| 229 | GPE3 Status:102B Enable:102F EnableWake:21 EnableRun:10 BaseGPENumber:18
|
|---|
| 230 | =========== Status 0x0 0
|
|---|
| 231 | APM: PSD find success. PSD Ftable:F9C1017C
|
|---|
| 232 | APM:Max C state 0
|
|---|
| 233 | Register Notify 1st FFCF528D
|
|---|
| 234 | FindPCIDevice
|
|---|
| 235 | Need: B:0 D:1F F:1
|
|---|
| 236 | Finding APIC0 PIC11 Dev: [IDE0]
|
|---|
| 237 | APM: Found Smart Battery "BAT0"
|
|---|
| 238 | APM: Found Smart Battery "BAT1"
|
|---|
| 239 | APM: Unknown design capacity
|
|---|
| 240 | APM: Found AC "AC__"
|
|---|
| 241 | ******** Event tread ***************
|
|---|
| 242 | AllocateSuspendMemory s_cpu:0
|
|---|
| 243 | Alloc s_cpu OK CPU0 2304 bytes at 0
|
|---|
| 244 | AllocSuspend: CPU0 CR3:211000
|
|---|
| 245 | Status 1Mb alloc 0
|
|---|
| 246 | APM: Unsetting suspend state
|
|---|
| 247 | ** Notify wait Counter 0 **
|
|---|
| 248 | AcpiWaitOBF rc=640 OBF:1
|
|---|
| 249 | Interrupt NOT Handled!!!!
|
|---|
| 250 | AcpiWaitIBF rc=640 IBF:1
|
|---|
| 251 | Interrupt NOT Handled!!!!
|
|---|
| 252 | Check - IRQ AcpiWaitOBF Ctl=29 OBF=1
|
|---|
| 253 | EC arm "_Q24" N:0 Cur:0
|
|---|
| 254 | ======= Execute EC 0 queue ===========
|
|---|
| 255 | AcpiOsExecute type:1
|
|---|
| 256 | ======= ACPIOSExecute 0 function ===========
|
|---|
| 257 | *** Device Notify ***
|
|---|
| 258 | Dev: [BAT0] Value:80
|
|---|
| 259 | Calling FFCF528D
|
|---|
| 260 | APM: ******** Notify: 80 *********
|
|---|
| 261 | APM: ******** End Notify: 80 *********
|
|---|
| 262 | Start Counter 0 NotCounter 1
|
|---|
| 263 | ** Notify wait Counter 1 **
|
|---|
| 264 | Check - IRQ AcpiWaitOBF Ctl=29 OBF=0
|
|---|
| 265 | EC arm "_Q4B" N:1 Cur:1
|
|---|
| 266 | ======= Execute EC 1 queue ===========
|
|---|
| 267 | AcpiOsExecute type:1
|
|---|
| 268 | ======= ACPIOSExecute 1 function ===========
|
|---|
| 269 | *** Device Notify ***
|
|---|
| 270 | Dev: [BAT0] Value:80
|
|---|
| 271 | Calling FFCF528D
|
|---|
| 272 | APM: ******** Notify: 80 *********
|
|---|
| 273 | APM: ******** End Notify: 80 *********
|
|---|
| 274 | Start Counter 1 NotCounter 2
|
|---|
| 275 | ** Notify wait Counter 2 **
|
|---|
| 276 | AcpiWaitOBF rc=640 OBF:1
|
|---|
| 277 | Interrupt NOT Handled!!!!
|
|---|
| 278 | AcpiWaitIBF rc=640 IBF:1
|
|---|
| 279 | Interrupt NOT Handled!!!!
|
|---|
| 280 | AcpiWaitIBF rc=640 IBF:1
|
|---|
| 281 | Interrupt NOT Handled!!!!
|
|---|
| 282 | Check - IRQ AcpiWaitOBF Ctl=29 OBF=1
|
|---|
| 283 | EC arm "_Q24" N:2 Cur:2
|
|---|
| 284 | ======= Execute EC 2 queue ===========
|
|---|
| 285 | AcpiOsExecute type:1
|
|---|
| 286 | ======= ACPIOSExecute 2 function ===========
|
|---|
| 287 | *** Device Notify ***
|
|---|
| 288 | Dev: [BAT0] Value:80
|
|---|
| 289 | Calling FFCF528D
|
|---|
| 290 | APM: ******** Notify: 80 *********
|
|---|
| 291 | APM: ******** End Notify: 80 *********
|
|---|
| 292 | Start Counter 2 NotCounter 3
|
|---|
| 293 | ** Notify wait Counter 3 **
|
|---|
| 294 | Check - IRQ AcpiWaitOBF Ctl=29 OBF=0
|
|---|
| 295 | EC arm "_Q4B" N:3 Cur:3
|
|---|
| 296 | ======= Execute EC 3 queue ===========
|
|---|
| 297 | AcpiOsExecute type:1
|
|---|
| 298 | ======= ACPIOSExecute 3 function ===========
|
|---|
| 299 | *** Device Notify ***
|
|---|
| 300 | Dev: [BAT0] Value:80
|
|---|
| 301 | Calling FFCF528D
|
|---|
| 302 | APM: ******** Notify: 80 *********
|
|---|
| 303 | APM: ******** End Notify: 80 *********
|
|---|
| 304 | Start Counter 3 NotCounter 4
|
|---|
| 305 | ** Notify wait Counter 4 **
|
|---|
| 306 | AcpiWaitIBF rc=640 IBF:1
|
|---|
| 307 | Interrupt NOT Handled!!!!
|
|---|
