Ticket #323: acpi2.2.log

File acpi2.2.log, 10.6 KB (added by eco, 6 years ago)

TP42, W4

Line 
1KEE Version 0x10000
2@#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec  3 2008 13:41:19
3MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0
4SS Selector fault
5CFG: Link [LNKA] IRQ10
6CFG: Link [LNKB] IRQ6
7AcpiOsInitialize ALLOC size 65536 at 0xF9A03000
8AcpiOsInitialize MapMem size 4096 at 0xFFEA1000
9AcpiOsCreateLock F9B671A0
10AcpiOsCreateLock F9B6CB64
11AcpiOsPredefinedOverride: "_REV"
12AcpiOsPredefinedOverride: "_OS_"
13AcpiOsPredefinedOverride: override to eComStation
14AcpiOsPredefinedOverride: "_GL_"
15AcpiOsPredefinedOverride: "_OSI"
16*** AcpiInitializeSubsystem Status = 0 ***
17ACPI: RSDP @ 0xF6DF0/0x24 (v2 IBM   )
18ACPI: XSDT @ 0x3FF6A6CD/0x4C (v1 IBM    TP-1R    0x3130  LTP 0x0)
19ACPI: FACP @ 0x3FF6A800/0xF4 (v3 IBM    TP-1R    0x3130 IBM  0x1)
20ACPI Warning (tbfadt-543): Optional field "Gpe1Block" has zero address or length: 0102C/0 [20081031]
21ACPI: DSDT @ 0x3FF6A9E7/0xC4D5 (v1 IBM    TP-1R    0x3130 MSFT 0x100000E)
22ACPI: FACS @ 0x3FF78000/0x40
23ACPI: SSDT @ 0x3FF6A9B4/0x33 (v1 IBM    TP-1R    0x3130 MSFT 0x100000E)
24ACPI: ECDT @ 0x3FF76EBC/0x52 (v1 IBM    TP-1R    0x3130 IBM  0x1)
25ACPI: TCPA @ 0x3FF76F0E/0x32 (v1 IBM    TP-1R    0x3130 PTL  0x1)
26ACPI: BOOT @ 0x3FF76FD8/0x28 (v1 IBM    TP-1R    0x3130  LTP 0x1)
27*** AcpiInitializeTables Status = 0 ***
28AcpiOsTableOverride Ex:FFE839E7 New:FFDEADA4 SIG:[DSDT]
29*** AcpiLoadTables Status = 0 ***
30Table [DSDT]
31Table [FACS]
32Table [FACP]
33Table [SSDT]
34Table [ECDT]
35EC Control:  66:1:8:0:0
36EC Data:     62:1:8:0:0
37UID:         0
38GPE bit:     1C
39Name in ACPI:\_SB.PCI0.LPC.EC
40Status GetHandle: 0 - AE_OK
41Table [TCPA]
42Table [BOOT]
43Size of FACDT 244
44Type of computer - Mobile
45System vector the SCI interrupt is wired to in 8259 mode. 9
46System port address of the SMI Command Port 0xB2
47The value to write to SMI_CMD to disable SMI   0xF0
48The value to write to SMI_CMD to re-enable SMI 0xF1
49The value to write to SMI_CMD to enter the S4BIOS state 0x0
50The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0xF3
51System port address of the PM1a Event Register Block 1000
52System port address of the PM1b Event Register Block 0
53Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
54System port address of the PM1a Control Register Block 1004
55System port address of the PM1b Control Register Block 0
56Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
57System port address of the PM2 Control Register Block 1020
58Number of bytes decoded by PM2_CNT_BLK 1
59System port address of the Power Management Timer Control Register Block 1008
60Number of bytes decoded by PM_TMR_BLK (=4) 4
61System port address of General-Purpose Event 0 Register Block 1028
62System port address of General-Purpose Event 1 Register Block 0
63Number of bytes decoded by GPE0_BLK 0x8
64Number of bytes decoded by GPE1_BLK 0x0
65Offset within the ACPI general-purpose event model where GPE1 based events start 0
66GPE enable register: 0: 0: 0: 10
67GPE status register: 0: 0: FF: 8
68The value OSPM writes to the SMI_CMD register to indicate OS support for the _CST object and C States Changed notification 0xF4
69The worst-case hardware latency to enter and exit a C2 state 1 us
70The worst-case hardware latency to enter and exit a C3 state 85 us
71The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
72The bit width of the processor's duty cycle setting value in the P_CNT register 3
73The RTC CMOS RAM index to the day-of-month alarm value 13
74The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
75IA-PC Boot Architecture Flags 0x3
76Fixed feature flags 2AD
77The reset register:
78Type of address space - System I/O
79Register Bit Width  8
80Register Bit Offset 0
81Access size 0
82Address 3321
83The value to write to the RESET_REG port to reset the system 6
84***** Throttl Width 3 Offset 1
85AcpiOsInstallIntterrupHandler IRQ9 handler F9B93CDB
86** AcpiEnableSubsystem Status = 0
87** AcpiInstallAddressSpaceHandler N0 EC Status = 0 count 1 ECadr:F9B61AAC - AE_OK
88Install GPE Status 0
89GpeSetType Status = 0 - AE_OK
90EC[0] GPE1C GpeEnable Status = 0 - AE_OK
91AcpiOsDerivePCIID([PCI0] ,[MHCS],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
92AcpiOsDerivePCIID([PCI0] ,[LPCS],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
93AcpiEcSetup handle F9A085C0 Function 0 Count 1
94Emm Setup St:8
95AcpiWaitIBF rc=640 IBF:0
96AcpiWaitOBF rc=640 OBF:0
97AcpiWaitIBF rc=640 IBF:0
98AcpiWaitIBF rc=640 IBF:0
99AcpiWaitIBF rc=640 IBF:0
100AcpiWaitOBF rc=640 OBF:0
101AcpiWaitIBF rc=640 IBF:0
102AcpiWaitIBF rc=640 IBF:0
103AcpiWaitIBF rc=640 IBF:0
104AcpiWaitOBF rc=640 OBF:0
105AcpiWaitIBF rc=640 IBF:0
106AcpiWaitOBF rc=640 OBF:0
107AcpiWaitIBF rc=640 IBF:0
108AcpiWaitIBF rc=640 IBF:0
109AcpiWaitIBF rc=640 IBF:0
110AcpiWaitOBF rc=640 OBF:0
111AcpiWaitIBF rc=640 IBF:0
112AcpiWaitIBF rc=640 IBF:0
113AcpiWaitIBF rc=640 IBF:0
114AcpiWaitOBF rc=640 OBF:0
115AcpiWaitIBF rc=640 IBF:0
116AcpiWaitIBF rc=640 IBF:0
117AcpiOsDerivePCIID([PCI0] ,[CBUS],) Bus:0 Dev:0 Fun:0 - Derive: Bus:2 Dev:0 Fun:0
118AcpiOsDerivePCIID([PCI0] ,[CBUS],) Bus:0 Dev:0 Fun:1 - Derive: Bus:2 Dev:0 Fun:1
119AcpiOsDerivePCIID([PCI0] ,[U7CS],) Bus:0 Dev:29 Fun:7 - Derive: Bus:0 Dev:29 Fun:7
120** AcpiInitializeObjects mask:0 Status = 0
121Processor [CPU_]
122Status 0x0 0
123Status Evaluate Processor PDC 0x0 AE_OK
124Status Evaluate Processor 0x0 AE_OK
125Status C 0x0 AE_OK
126Usable:1 Counter:0
127 CPU id to N:0
128 ProcId:     0x1
129 P_BLK:      0x1010
130 P_BLK len:  0x6
131CPU0 Status Evaluate _PCT 0x0 AE_OK
132 Perf control:  0xB2
133 Perf status:  0xB3
134AcpiWaitIBF rc=640 IBF:0
135AcpiWaitOBF rc=640 OBF:0
136CPU0 Status Evaluate _CST 0x0 AE_OK
137_CST has 4 Cstates
138 C1State control:  0x0
139 Latency: 1 uSec
140 Power consuption: 1000 mWatt
141 C2State control:  0x1014
142 Latency: 1 uSec
143 Power consuption: 500 mWatt
144 C3State control:  0x1015
145 Latency: 85 uSec
146 Power consuption: 250 mWatt
147 C3State control:  0x1016
148 Latency: 185 uSec
149 Power consuption: 100 mWatt
150Found bridge "PCI0" Addr:0x0 BBN is 0 Dev:0x0 Fun:0x0
151AcpiWaitIBF rc=640 IBF:0
152AcpiWaitOBF rc=640 OBF:0
153AcpiWaitIBF rc=640 IBF:0
154AcpiWaitOBF rc=640 OBF:0
155Finding:1 bridges
1560:0.0  Class:600  Hdr:0   Bridge H->0
1570:1.0  Class:604  Hdr:1   Bridge 0->1 Bridge
1580:29.0  Class:C03  Hdr:80
1590:29.1  Class:C03  Hdr:0
1600:29.2  Class:C03  Hdr:0
1610:29.7  Class:C03  Hdr:0
1620:30.0  Class:604  Hdr:1   Bridge 0->2..8 Bridge
1630:31.0  Class:601  Hdr:80
1640:31.1  Class:101  Hdr:0
1650:31.3  Class:C05  Hdr:0
1660:31.5  Class:401  Hdr:0
1670:31.6  Class:703  Hdr:0
1681:0.0  Class:300  Hdr:0
1692:0.0  Class:607  Hdr:82   Bridge 2->3..5 CardBus
1702:0.1  Class:607  Hdr:82   Bridge 2->6..8 CardBus
1712:1.0  Class:200  Hdr:0
1722:2.0  Class:200  Hdr:0
173PCI Bus scan: 9 PCI buses found.
174Scan ACPI tree for PCI functions
1750:0.0  'PCI0' (F9A05E10)
1760:31.0  'LPC_' (F9A05E38)
1770:1.0  'AGP_' (F9A0E4B0)
1781:0.0  'VID_' (F9A0E870)
1790:30.0  'PCI1' (F9A0F4A8)
1802:0.0  'CBS0' (F9A0F570)
1812:0.1  'CBS1' (F9A0F858)
1822:3.0  'DOCK' (F9A0FB40)
1830:31.1  'IDE0' (F9A12470)
1840:29.0  'USB0' (F99F36F8)
1850:29.1  'USB1' (F99F3A30)
1860:29.2  'USB2' (F99F3C68)
1870:29.7  'USB7' (F99F3CB8)
1880:31.6  'AC9M' (F99F3FF0)
189Bridges found:
1900:0.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (F9A05E10) _PRT
1910:1.0  class:604  type: 1  Bus 0->1  ACPI: 'AGP_' (F9A0E4B0) _PRT
1920:30.0  class:604  type: 1  Bus 0->2  ACPI: 'PCI1' (F9A0F4A8) _PRT
1932:0.0  class:607  type: 2  Bus 2->3  ACPI: 'CBS0' (F9A0F570)
1942:0.1  class:607  type: 2  Bus 2->6  ACPI: 'CBS1' (F9A0F858)
195IRQLinks found:
196 Set: 10  Set: 10  Set: 10  Set: 10 0: 'LNKA' (F9A047C8)  P[ 3, 4, 5, 6, 7, 9,*10, 11] <- 2:1.0 2:0.0 1:0.0 0:29.0
197                       A[]
1981: 'LNKD' (F9A04EA0)  P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.1
199                       A[]
2002: 'LNKC' (F9A04C58)  P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 2:2.0 0:31.1 0:29.2
201                       A[]
2023: 'LNKH' (F9A057C0)  P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.7
203                       A[]
204 Set: 6  Set: 6  Set: 6  Set: 6 4: 'LNKB' (F9A04A10)  P[ 3, 4, 5,*6, 7, 9, 10, 11] <- 2:0.1 0:31.6 0:31.5 0:31.3
205                       A[]
2065: 'LNKE' (F9A050E8)  P[]
207                       A[]
208PCI devices found:
2090:0.0  8086:3340  'PCI0'
2100:1.0  8086:3341  'AGP_'
2110:29.0  8086:24C2  'USB0'  IRQs: PCI:11 PIC:'LNKA':11 APIC:0
2120:29.1  8086:24C4  'USB1'  IRQs: PCI:11 PIC:'LNKD':11 APIC:0
2130:29.2  8086:24C7  'USB2'  IRQs: PCI:11 PIC:'LNKC':11 APIC:0
2140:29.7  8086:24CD  'USB7'  IRQs: PCI:11 PIC:'LNKH':11 APIC:0
2150:30.0  8086:2448  'PCI1'
2160:31.0  8086:24CC  'LPC_'
2170:31.1  8086:24CA  'IDE0'  IRQs: PCI:0 PIC:'LNKC':11 APIC:0
2180:31.3  8086:24C3          IRQs: PCI:11 PIC:'LNKB':11 APIC:0
2190:31.5  8086:24C5          IRQs: PCI:11 PIC:'LNKB':11 APIC:0
2200:31.6  8086:24C6  'AC9M'  IRQs: PCI:11 PIC:'LNKB':11 APIC:0
2211:0.0  1002:4C57  'VID_'  IRQs: PCI:11 PIC:'LNKA':11 APIC:0
2222:0.0  104C:AC46  'CBS0'  IRQs: PCI:11 PIC:'LNKA':11 APIC:0
2232:0.1  104C:AC46  'CBS1'  IRQs: PCI:11 PIC:'LNKB':11 APIC:0
2242:1.0  8086:101E          IRQs: PCI:11 PIC:'LNKA':11 APIC:0
2252:2.0  168C:13          IRQs: PCI:11 PIC:'LNKC':11 APIC:0
226Bus detected - 8
227** AcpiInstall Power Device Status = 0
228ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
229ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
230** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
231** AcpiInstall PMTimer Device Status = 0
232** Total use:198440 unuse:11200 count:3869 **
233Get GpeHdl Status = 0 - AE_OK
234Event [_L18]
235Install GPE0x18  Status 0x0
236EndScan GPE Status 0
237===== Info ========
238Int Level 9
239In Xrupt F99E6C60 in arg F99E6C60
240      Node
241Name [_GPE]
242Flags: 0
243Reg count 4
244GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
245GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
246GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
247GPE0 Status:1028 Enable:102C EnableWake:38 EnableRun:0 BaseGPENumber:0
248GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
249GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
250GPE1 Status:1029 Enable:102D EnableWake:28 EnableRun:0 BaseGPENumber:8
251GPE2 Status:102A Enable:102E EnableWake:0 EnableRun:0 BaseGPENumber:10
252GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0
253GPE0x1C Flag:0x4 Status - Set 0x0 Enable 0x0
254GPE0x1D Flag:0x2 Status - Set 0x0 Enable 0x0
255GPE3 Status:102B Enable:102F EnableWake:21 EnableRun:10 BaseGPENumber:18
256=========== Status 0x0 0
257APM: PSD find success. PSD Ftable:F9B6017C
258APM:Max C state 0
259Register Notify 1st FEE2528D
260FindPCIDevice
261 Need: B:0 D:1F F:1
262Finding APIC0 PIC11 Dev: [IDE0]
263Uniaud32: PSD find success. PSD Ftable:F9B6017C
264FindPCIDevice
265 Need: B:0 D:1F F:0
266APM: Found Smart Battery "BAT0"
267APM: Found Smart Battery "BAT1"
268APM: Unknown design capacity
269APM: Found AC "AC__"
270******** Event tread ***************
271AllocateSuspendMemory s_cpu:0
272Alloc s_cpu OK CPU0 2304 bytes at 0
273AllocSuspend: CPU0 CR3:200000
274Status 1Mb alloc 0
275APM: Unsetting suspend state