Ticket #318: acpi.log

AllocIRQMem at 0xFFE84000 (24576 bytes)

PSD_install options:" /SMP /APIC /CD /TMR /!NOD" @#netlabs dot org:3.11#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Oct  2 2008 10:45:18
MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
New Stack = FFD00000 Size:0x8000
AcpiOsInitialize ALLOC size 65536 at 0xF96A0000
AcpiOsInitialize MapMem size 4096 at 0xFFE9A000
AcpiOsCreateLock F9C070EC
AcpiOsCreateLock F9C0CAC4
AcpiOsPredefinedOverride: "_REV"
AcpiOsPredefinedOverride: "_OS_"
AcpiOsPredefinedOverride: override to eComStation
AcpiOsPredefinedOverride: "_GL_"
AcpiOsPredefinedOverride: "_OSI"
*** AcpiInitializeSubsystem Status = 0 ***
ACPI: RSDP @ 0xF78C0/0x14 (v0 PTLTD )
ACPI: RSDT @ 0x7FF0B326/0x40 (v1 PTLTD    RSDT   0x6040000  LTP 0x0)
ACPI: FACP @ 0x7FF10BDC/0x74 (v1 NVIDIA CK8S     0x6040000 PTL_ 0xF4240)
ACPI: DSDT @ 0x7FF0B366/0x5876 (v1 NVIDIA CK8 0x6040000 MSFT 0x100000E)
ACPI: FACS @ 0x7FF11FC0/0x40
ACPI: SRAT @ 0x7FF10C50/0xC8 (v1 AMD    HAMMER   0x6040000 AMD  0x1)
ACPI: SPCR @ 0x7FF10D18/0x50 (v1 PTLTD  $UCRTBL$ 0x6040000 PTL  0x1)
ACPI: MCFG @ 0x7FF10D68/0x3C (v1 PTLTD    MCFG   0x6040000  0x0)
ACPI: APIC @ 0x7FF10DA4/0x6A (v1 PTLTD   0x6040000  LTP 0x0)
ACPI: BOOT @ 0x7FF10E0E/0x28 (v1 PTLTD  $SBFTBL$ 0x6040000  LTP 0x1)
ACPI: SSDT @ 0x7FF10E36/0x1CA (v1 PTLTD  POWERNOW 0x6040000  LTP 0x1)
*** AcpiInitializeTables Status = 0 ***
AcpiOsTableOverride Ex:FFD15366 New:FFCFFFC4 SIG:[DSDT]
*** AcpiLoadTables Status = 0 ***
Table [DSDT]
Table [FACS]
Table [FACP]
Table [SRAT]
Table [SPCR]
Table [MCFG]
Table [APIC]
Local APIC address: FEE00000h
System also has 8259
APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable
APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
APIC_IO: IO ApicID 3h addr D0600000h INTI 24
APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Low 1 Trigger by: Level
APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
Table [BOOT]
Table [SSDT]
Size of FACDT 244
Type of computer - Unspecified
System vector the SCI interrupt is wired to in 8259 mode. 9
System port address of the SMI Command Port 0x842E
The value to write to SMI_CMD to disable SMI   0xF0
The value to write to SMI_CMD to re-enable SMI 0xF1
The value to write to SMI_CMD to enter the S4BIOS state 0x0
System port address of the PM1a Event Register Block 8000
System port address of the PM1b Event Register Block 0
Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
System port address of the PM1a Control Register Block 8004
System port address of the PM1b Control Register Block 0
Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
System port address of the PM2 Control Register Block 801C
Number of bytes decoded by PM2_CNT_BLK 1
System port address of the Power Management Timer Control Register Block 8008
Number of bytes decoded by PM_TMR_BLK (=4) 4
System port address of General-Purpose Event 0 Register Block 8020
System port address of General-Purpose Event 1 Register Block 0
Number of bytes decoded by GPE0_BLK 0x8
Number of bytes decoded by GPE1_BLK 0x0
Offset within the ACPI general-purpose event model where GPE1 based events start 0
GPE enable register: 21: 29: 3: 0
GPE status register: 0: 0: 10: 0
The system does not support a C2 state. FFFF
The system does not support a C3 state FFFF
The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
The RTC CMOS RAM index to the day-of-month alarm value 125
The RTC CMOS RAM index to the month of year alarm value 126
The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
IA-PC Boot Architecture Flags 0x0
Fixed feature flags A5
The reset register:
Type of address space - System Memory
Register Bit Width  0
Register Bit Offset 0
Access size 0
Address 0
The value to write to the RESET_REG port to reset the system 0
***** Throttl Width 0 Offset 1
AcpiOsInstallIntterrupHandler IRQ9 handler F96E2129
** AcpiEnableSubsystem Status = 0
AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:1 Fun:0 - Derive: Bus:0 Dev:1 Fun:0
** Scan EC Status = 0
** AcpiInitializeObjects mask:0 Status = 0
Processor [CPU0]
Processor [CPU1]
Processor [CPU2]
Processor [CPU3]
Status 0x0 0
AcpiOsDerivePCIID([PCI0] ,[P44_],) Bus:0 Dev:1 Fun:0 - Derive: Bus:0 Dev:1 Fun:0
AcpiOsDerivePCIID([PCI0] ,[HMM0],) Bus:0 Dev:24 Fun:1 - Derive: Bus:0 Dev:24 Fun:1
AcpiOsDerivePCIID([PCI0] ,[HMM1],) Bus:0 Dev:24 Fun:1 - Derive: Bus:0 Dev:24 Fun:1
AcpiOsDerivePCIID([PCI0] ,[P60_],) Bus:0 Dev:1 Fun:0 - Derive: Bus:0 Dev:1 Fun:0
AcpiOsDerivePCIID([PCI0] ,[P64_],) Bus:0 Dev:1 Fun:0 - Derive: Bus:0 Dev:1 Fun:0
AcpiOsDerivePCIID([PCI0] ,[P68_],) Bus:0 Dev:1 Fun:0 - Derive: Bus:0 Dev:1 Fun:0
AcpiOsDerivePCIID([PCI0] ,[SBA0],) Bus:0 Dev:1 Fun:1 - Derive: Bus:0 Dev:1 Fun:1
AcpiOsDerivePCIID([PCI0] ,[SBA1],) Bus:0 Dev:1 Fun:1 - Derive: Bus:0 Dev:1 Fun:1
AcpiOsDerivePCIID([PCI1] ,[PIRQ],) Bus:128 Dev:1 Fun:0 - Derive: Bus:128 Dev:1 Fun:0
Current IRQs line 48
Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
Status Evaluate Processor 0x0 AE_OK
Usable:2 Counter:0 
 CPU id to N:0
 ProcId:     0x0
 P_BLK:      0x8010
 P_BLK len:  0x6
CPU0 Status Evaluate _PCT 0x0 AE_OK
 Perf control:  0x0
 Perf status:  0x0
Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
Status Evaluate Processor 0x0 AE_OK
Usable:2 Counter:1 
 CPU id to N:1
 ProcId:     0x1
 P_BLK:      0x0
 P_BLK len:  0x0
CPU1 Status Evaluate _PCT 0x0 AE_OK
 Perf control:  0x0
 Perf status:  0x0
** AcpiInstall Power Device Status = 0
ACPI Error (evxfevnt-288): Could not enable SleepButton event [20080729]
ACPI Warning (evxface-235): Could not enable fixed event 3 [20080729]
** AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
** AcpiInstall PMTimer Device Status = 0
** Total use:117288 unuse:1200 count:2257 **
Get GpeHdl Status = 0 - AE_OK
Event [_L00]
Install GPE0x0  Status 0x0
Event [_L05]
Install GPE0x5  Status 0x0
Event [_L0B]
Install GPE0xB  Status 0x0
Event [_L0D]
Install GPE0xD  Status 0x0
Event [_L10]
Install GPE0x10  Status 0x0
EndScan GPE Status 0
===== Info ========
Int Level 9
In Xrupt F96928B0 in arg F96928B0
      Node
Name [_GPE]
Flags: 0
Reg count 4
GPE0x0 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0 Status:8020 Enable:8024 EnableWake:21 EnableRun:0 BaseGPENumber:0
GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
GPE1 Status:8021 Enable:8025 EnableWake:29 EnableRun:0 BaseGPENumber:8
GPE0x10 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x11 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE2 Status:8022 Enable:8026 EnableWake:3 EnableRun:0 BaseGPENumber:10
GPE3 Status:8023 Enable:8027 EnableWake:0 EnableRun:0 BaseGPENumber:18
=========== Status 0x0 0
PSDFree: at 0xF96B0000 success!
APM: PSD find success. PSD Ftable:F9C0017C
Register Notify 1st FFCDA1CE 
FindPCIDevice
FindPCIDevice
Uniaud32: PSD find success. PSD Ftable:F9C0017C
FindPCIDevice
******** Event tread ***************
AllocateSuspendMemory s_cpu:0
Alloc s_cpu OK CPU0 2304 bytes at 0
AllocSuspend: CPU0 CR3:211000
AllocSuspend: CPU1 CR3:F31000
Status 1Mb alloc 0