Ticket #280: pci.log

File pci.log, 23.7 KB (added by valerius, 16 years ago)
Line 
1Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
2Loaded Vendor Data : "This is version 573 of this file; 10-10-2005 (D-M-Y)."
3
4PCI BIOS Version 2.10 found!
5Number of PCI Busses : 8
6PCI Characteristics  : Config Mechanism 1
7
8Searching for PCI Devices using the OEMHLP$ driver
9
10 Bus 0 (PCI Express), Device Number 0, Device Function 0
11 Vendor 8086h Intel Corporation
12 Device 2590h 82915PM/GM/GMS, 82910GML Host Bridge
13 Command 0106h (Memory Access, BusMaster, System Errors)
14 Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
15   Received Master Abort, Fast Timing)
16 Revision 04h, Header Type 00h, Bus Latency Timer 00h
17 Self test 00h (Self test not supported)
18 PCI Class Bridge, type PCI to HOST
19 Subsystem ID 404717C0h Unknown
20 Subsystem Vendor 17C0h Wistron Corporation
21 New Capabilities List Present:
22   Vendor-Dependant Capability
23
24 Bus 0 (PCI Express), Device Number 1, Device Function 0
25 Vendor 8086h Intel Corporation
26 Device 2591h 82915PM/GM PCI Express Graphics Port
27 Command 0007h (I/O Access, Memory Access, BusMaster)
28 Status 0010h (Has Capabilities List, Fast Timing)
29 Revision 04h, Header Type 01h, Bus Latency Timer 00h
30 Self test 00h (Self test not supported)
31 Cache line size 32 Bytes (8 DWords)
32 PCI Class Bridge, type PCI to PCI
33 Subsystem ID 404817C0h Unknown
34 Subsystem Vendor 17C0h Wistron Corporation
35 System IRQ 10, INT# A
36 PCI Bridge Information:
37   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
38   Secondary Bus Command 000Ch (ISA mapping, VGA mapping)
39   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
40   Secondary Bus Latency 00h
41   I/O Port Range Passed to Secondary Bus : 2000h..2FFFh (16-bit)
42   Memory   Range Passed to Secondary Bus : B0100000h..B01FFFFFh
43   Prefetchable Memory Range Passed to Secondary Bus : C0000000h..CFFFFFFFh
44 New Capabilities List Present:
45   Subsystem ID & Subsystem Vendor ID Capability
46     SSVID : 17C0h
47     SSID  : 4048h
48   Power Management Capability, Version 1.1
49     Does not support low power State D1 or D2
50     Supports PME# signalling from mode(s) D0, D3hot, D3cold
51     PME# signalling is currently disabled
52     3.3v AUX Current required : 0 mA (Self powered)
53     Current Power State : D0 (Device operational, no power saving)
54   Message Signalled Interrupt Capability
55     MSI is disabled
56     MSI function can generate 32-bit addresses
57   PCI Express Capability, Version 1
58     Device/Port Type :
59       Root port of PCI Express Root Complex
60     Port Type :
61       Port is an Expansion Slot
62       Unsupported Request Severity is Non-Fatal
63     Device Status :
64     Link Capabilities :
65       Maximum Link speed : 2.5Gb/s
66       Maximum Link Width : x16
67       Link Port Number   : 2
68     Link Control :
69       Common Clock Configuration In Use
70     Link Status :
71       Current Link speed : 2.5Gb/s
72       Current Link Width : x16
73     Slot Capabilities :
74       Slot Power Limit Value :   4.000 Watts
75       Physical slot Number 0
76
77 Bus 0 (PCI Express), Device Number 27, Device Function 0
78 Vendor 8086h Intel Corporation
79 Device 2668h 82801FB ICH6 High Definition Audio Controller
80 Command 0006h (Memory Access, BusMaster)
81 Status 0010h (Has Capabilities List, Fast Timing)
82 Revision 04h, Header Type 00h, Bus Latency Timer 00h
83 Self test 00h (Self test not supported)
84 Cache line size 32 Bytes (8 DWords)
85 PCI Class Multimedia, type Unknown!
86 Subsystem ID 201717C0h Unknown
87 Subsystem Vendor 17C0h Wistron Corporation
88 Address 0 is a Memory Address (64-bit) : B0000000h..B0003FFFh
89 System IRQ 10, INT# A
90 New Capabilities List Present:
91   Power Management Capability, Version 1.1
92     Does not support low power State D1 or D2
93     Supports PME# signalling from mode(s) D0, D3hot, D3cold
94     PME# signalling is currently disabled
95     3.3v AUX Current required : 55 mA
96     Current Power State : D0 (Device operational, no power saving)
97   Message Signalled Interrupt Capability
98     MSI is disabled
99     MSI function can generate 64-bit addresses
100   PCI Express Capability, Version 1
101     Device/Port Type :
102       Root Complex Integrated Endpoint Device
103       Unsupported Request Severity is Non-Fatal
104     Device Status :
105       AUX Power Detected
106     Link Capabilities :
107       Maximum Link speed : Unknown (00h)!!
108       Maximum Link Width : xReserved
109       Link Port Number   : 0
110     Link Control :
111       Asynchronous Clocking in Use
112     Link Status :
113       Current Link speed : Unknown (00)!!
114       Current Link Width : x0
115
116 Bus 0 (PCI Express), Device Number 28, Device Function 0
117 Vendor 8086h Intel Corporation
118 Device 2660h 82801FB ICH6 PCI Express Root Port 1
119 Command 0007h (I/O Access, Memory Access, BusMaster)
120 Status 0010h (Has Capabilities List, Fast Timing)
121 Revision 04h, Header Type 81h, Bus Latency Timer 00h
122 Self test 00h (Self test not supported)
123 Cache line size 32 Bytes (8 DWords)
124 PCI Class Bridge, type PCI to PCI
125 Subsystem ID 403D17C0h Unknown
126 Subsystem Vendor 17C0h Wistron Corporation
127 System IRQ 11, INT# A
128 PCI Bridge Information:
129   Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
130   Secondary Bus Command 0004h (ISA mapping)
131   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
132   Secondary Bus Latency 00h
133   I/O Port Range Passed to Secondary Bus : 3000h..3FFFh (16-bit)
134   Memory   Range Passed to Secondary Bus : B4000000h..B7FFFFFFh
135   Prefetchable Memory Range Passed to Secondary Bus : D0000000h..D3FFFFFFh
136 New Capabilities List Present:
137   PCI Express Capability, Version 1
138     Device/Port Type :
139       Root port of PCI Express Root Complex
140     Port Type :
141       Port is an Expansion Slot
142       Unsupported Request Severity is Non-Fatal
143     Device Status :
144       AUX Power Detected
145     Link Capabilities :
146       Maximum Link speed : 2.5Gb/s
147       Maximum Link Width : x1
148       Link Port Number   : 1
149     Link Control :
150       Asynchronous Clocking in Use
151     Link Status :
152       Current Link speed : 2.5Gb/s
153       Current Link Width : x0
154     Slot Capabilities :
155       Hot Plug Surprise is Possible
156       Hot Plug Capable
157       Slot Power Limit Value :   2.000 Watts
158       Physical slot Number 0
159   Message Signalled Interrupt Capability
160     MSI is disabled
161     MSI function can generate 32-bit addresses
162   Subsystem ID & Subsystem Vendor ID Capability
163     SSVID : 17C0h
164     SSID  : 403Dh
165   Power Management Capability, Version 1.1
166     Does not support low power State D1 or D2
167     Supports PME# signalling from mode(s) D0, D3hot, D3cold
168     PME# signalling is currently disabled
169     3.3v AUX Current required : 0 mA (Self powered)
170     Current Power State : D0 (Device operational, no power saving)
171
172 Bus 0 (PCI Express), Device Number 29, Device Function 0
173 Vendor 8086h Intel Corporation
174 Device 2658h 82801FB ICH6 USB UHCI Controller 1
175 Command 0005h (I/O Access, BusMaster)
176 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
177 Revision 04h, Header Type 80h, Bus Latency Timer 00h
178 Self test 00h (Self test not supported)
179 PCI Class Serial, type USB (UHCI)
180 Subsystem ID 10A517C0h Unknown
181 Subsystem Vendor 17C0h Wistron Corporation
182 Address 0 is not present or not configured!
183 Address 1 is not present or not configured!
184 Address 2 is not present or not configured!
185 Address 3 is not present or not configured!
186 Address 4 is an I/O Port : 1800h..1813h
187 System IRQ 11, INT# A
188
189 Bus 0 (PCI Express), Device Number 29, Device Function 1
190 Vendor 8086h Intel Corporation
191 Device 2659h 82801FB ICH6 USB UHCI Controller 2
192 Command 0005h (I/O Access, BusMaster)
193 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
194 Revision 04h, Header Type 00h, Bus Latency Timer 00h
195 Self test 00h (Self test not supported)
196 PCI Class Serial, type USB (UHCI)
197 Subsystem ID 10A517C0h Unknown
198 Subsystem Vendor 17C0h Wistron Corporation
199 Address 0 is not present or not configured!
200 Address 1 is not present or not configured!
201 Address 2 is not present or not configured!
202 Address 3 is not present or not configured!
203 Address 4 is an I/O Port : 1820h..1833h
204 System IRQ 11, INT# B
205
206 Bus 0 (PCI Express), Device Number 29, Device Function 2
207 Vendor 8086h Intel Corporation
208 Device 265Ah 82801FB ICH6 USB UHCI Controller 3
209 Command 0005h (I/O Access, BusMaster)
210 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
211 Revision 04h, Header Type 00h, Bus Latency Timer 00h
212 Self test 00h (Self test not supported)
213 PCI Class Serial, type USB (UHCI)
214 Subsystem ID 10A517C0h Unknown
215 Subsystem Vendor 17C0h Wistron Corporation
216 Address 0 is not present or not configured!
217 Address 1 is not present or not configured!
218 Address 2 is not present or not configured!
219 Address 3 is not present or not configured!
220 Address 4 is an I/O Port : 1840h..1853h
221 System IRQ 11, INT# C
222
223 Bus 0 (PCI Express), Device Number 29, Device Function 3
224 Vendor 8086h Intel Corporation
225 Device 265Bh 82801FB ICH6 USB UHCI Controller 4
226 Command 0005h (I/O Access, BusMaster)
227 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
228 Revision 04h, Header Type 00h, Bus Latency Timer 00h
229 Self test 00h (Self test not supported)
230 PCI Class Serial, type USB (UHCI)
231 Subsystem ID 10A517C0h Unknown
232 Subsystem Vendor 17C0h Wistron Corporation
233 Address 0 is not present or not configured!
234 Address 1 is not present or not configured!
235 Address 2 is not present or not configured!
236 Address 3 is not present or not configured!
237 Address 4 is an I/O Port : 1860h..1873h
238 System IRQ 11, INT# D
239
240 Bus 0 (PCI Express), Device Number 29, Device Function 7
241 Vendor 8086h Intel Corporation
242 Device 265Ch 82801FB ICH6 USB 2.0 EHCI Controller
243 Command 0106h (Memory Access, BusMaster, System Errors)
244 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
245   Medium Timing)
246 Revision 04h, Header Type 00h, Bus Latency Timer 00h
247 Self test 00h (Self test not supported)
248 PCI Class Serial, type USB 2.0 (EHCI)
249 Subsystem ID 10A617C0h Unknown
250 Subsystem Vendor 17C0h Wistron Corporation
251 Address 0 is a Memory Address (0-4GiB) : B0004000h..B0004093h
252 System IRQ 11, INT# A
253 New Capabilities List Present:
254   Power Management Capability, Version 1.1
255     Does not support low power State D1 or D2
256     Supports PME# signalling from mode(s) D0, D3hot, D3cold
257     PME# signalling is currently disabled
258     3.3v AUX Current required : 375 mA
259     Current Power State : D0 (Device operational, no power saving)
260   USB 2.0 EHCI Debug Port Capability
261
262 Bus 0 (PCI Express), Device Number 30, Device Function 0
263 Vendor 8086h Intel Corporation
264 Device 2448h 82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge
265 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
266 Status 0010h (Has Capabilities List, Fast Timing)
267 Revision D4h, Header Type 01h, Bus Latency Timer 00h
268 Self test 00h (Self test not supported)
269 PCI Class Bridge, type PCI to PCI (Subtractive Decode)
270 Subsystem ID 403B17C0h Unknown
271 Subsystem Vendor 17C0h Wistron Corporation
272 PCI Bridge Information:
273   Primary Bus Number 0, Secondary Bus Number 6, Subordinate Bus number 7
274   Secondary Bus Command 0004h (ISA mapping)
275   Secondary Bus Status  2280h (Supports Back-To-Back Trans.,
276     Received Master Abort, Medium Timing)
277   Secondary Bus Latency D8h
278   I/O Port Range Passed to Secondary Bus : 4000h..4FFFh (16-bit)
279   Memory   Range Passed to Secondary Bus : B8000000h..B80FFFFFh
280   Prefetchable Memory Range Passed to Secondary Bus : None
281 New Capabilities List Present:
282   Subsystem ID & Subsystem Vendor ID Capability
283     SSVID : 17C0h
284     SSID  : 403Bh
285
286 Bus 0 (PCI Express), Device Number 31, Device Function 0
287 Vendor 8086h Intel Corporation
288 Device 2641h 82801FBM ICH6M LPC Interface Bridge
289 Command 0007h (I/O Access, Memory Access, BusMaster)
290 Status 0200h (Medium Timing)
291 Revision 04h, Header Type 80h, Bus Latency Timer 00h
292 Self test 00h (Self test not supported)
293 PCI Class Bridge, type PCI to ISA
294 Subsystem ID 404517C0h Unknown
295 Subsystem Vendor 17C0h Wistron Corporation
296
297 Bus 0 (PCI Express), Device Number 31, Device Function 1
298 Vendor 8086h Intel Corporation
299 Device 266Fh 82801FB ICH6 Ultra ATA Storage Controller
300 Command 0005h (I/O Access, BusMaster)
301 Status 0288h (Signalled Interrupt, Supports Back-To-Back Trans.,
302   Medium Timing)
303 Revision 04h, Header Type 00h, Bus Latency Timer 00h
304 Self test 00h (Self test not supported)
305 PCI Class Storage, type IDE (ATA)
306 PCI EIDE Controller Features :
307   BusMaster EIDE is supported
308   Primary   Channel is at I/O Port 01F0h and IRQ 14
309   Secondary Channel is disabled
310 Subsystem ID 404317C0h Unknown
311 Subsystem Vendor 17C0h Wistron Corporation
312 Address 0 is an I/O Port : 0000h (unconfigured)
313 Address 1 is an I/O Port : 0000h (unconfigured)
314 Address 2 is an I/O Port : 0000h (unconfigured)
315 Address 3 is an I/O Port : 0000h (unconfigured)
316 Address 4 is an I/O Port : 1880h..1887h
317 System IRQ (disabled), INT# A
318
319 Bus 0 (PCI Express), Device Number 31, Device Function 2
320 Vendor 8086h Intel Corporation
321 Device 2653h 82801FBM ICH6M SATA Controller
322 Command 0007h (I/O Access, Memory Access, BusMaster)
323 Status 02B0h (Has Capabilities List, Supports 66MHz,
324   Supports Back-To-Back Trans., Medium Timing)
325 Revision 04h, Header Type 00h, Bus Latency Timer 00h
326 Self test 00h (Self test not supported)
327 PCI Class Storage, type Serial ATA (AHCI 1.0)
328 Subsystem ID 404217C0h Unknown
329 Subsystem Vendor 17C0h Wistron Corporation
330 Address 0 is an I/O Port : 18C0h..18C7h
331 Address 1 is an I/O Port : 18B8h..18BBh
332 Address 2 is an I/O Port : 18B0h..18B7h
333 Address 3 is an I/O Port : 1894h..1897h
334 Address 4 is an I/O Port : 18A0h..18A7h
335 Address 5 is a Memory Address (0-4GiB) : B0004400h..B00047FFh
336 System IRQ 11, INT# B
337 New Capabilities List Present:
338   Power Management Capability, Version 1.1
339     Does not support low power State D1 or D2
340     Supports PME# signalling from mode(s) D3hot
341     PME# signalling is currently disabled
342     3.3v AUX Current required : 0 mA (Self powered)
343     Current Power State : D0 (Device operational, no power saving)
344
345 Bus 0 (PCI Express), Device Number 31, Device Function 3
346 Vendor 8086h Intel Corporation
347 Device 266Ah 82801FB ICH6 SMBus Controller
348 Command 0101h (I/O Access, System Errors)
349 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
350 Revision 04h, Header Type 00h, Bus Latency Timer 00h
351 Self test 00h (Self test not supported)
352 PCI Class Serial, type SMBus Controller
353 Subsystem ID 404117C0h Unknown
354 Subsystem Vendor 17C0h Wistron Corporation
355 Address 0 is not present or not configured!
356 Address 1 is not present or not configured!
357 Address 2 is not present or not configured!
358 Address 3 is not present or not configured!
359 Address 4 is an I/O Port : 18E0h..18FFh
360 System IRQ 11, INT# B
361
362 Bus 1 (AGP), Device Number 0, Device Function 0
363 Vendor 1002h ATI Technologies Inc
364 Device 5460h Mobility Radeon X300
365 Command 0007h (I/O Access, Memory Access, BusMaster)
366 Status 0010h (Has Capabilities List, Fast Timing)
367 Revision 00h, Header Type 00h, Bus Latency Timer 00h
368 Self test 00h (Self test not supported)
369 Cache line size 32 Bytes (8 DWords)
370 PCI Class Display, type VGA
371 Subsystem ID 207917C0h Unknown
372 Subsystem Vendor 17C0h Wistron Corporation
373 Address 0 is a Memory Address (0-4GiB, Prefetchable) : C0000000h
374 Address 1 is an I/O Port : 2000h..20FFh
375 Address 2 is a Memory Address (0-4GiB) : B0100000h
376 System IRQ 10, INT# A
377 Expansion ROM of 128 KiB decoded by this card, currently disabled
378 New Capabilities List Present:
379   Power Management Capability, Version 1.1
380     Supports low power State D1
381     Supports low power State D2
382     Does not support PME# signalling
383     Current Power State : D0 (Device operational, no power saving)
384   PCI Express Capability, Version 1
385     Device/Port Type :
386       PCI Express Endpoint Device
387     Device Capabilities :
388       Unsupported Request Severity is Fatal
389     Device Status :
390     Link Capabilities :
391       Maximum Link speed : 2.5Gb/s
392       Maximum Link Width : x16
393       Link Port Number   : 0
394     Link Control :
395       Common Clock Configuration In Use
396     Link Status :
397       Current Link speed : 2.5Gb/s
398       Current Link Width : x16
399   Message Signalled Interrupt Capability
400     MSI is disabled
401     MSI function can generate 64-bit addresses
402
403 Bus 6 (PCI), Device Number 5, Device Function 0
404 Vendor 8086h Intel Corporation
405 Device 4220h PRO/Wireless 2200BG Network Connection
406 Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors)
407 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
408   Medium Timing)
409 Revision 05h, Header Type 00h, Bus Latency Timer 20h
410 Minimum Bus Grant 03h, Maximum Bus Latency 18h
411 Self test 00h (Self test not supported)
412 Cache line size 32 Bytes (8 DWords)
413 PCI Class Network, type Other
414 Subsystem ID 27028086h PRO/Wireless 2200BG Network Connection
415 Subsystem Vendor 8086h Intel Corporation
416 Address 0 is a Memory Address (0-4GiB) : B8006000h..B8006FFFh
417 System IRQ 10, INT# A
418 New Capabilities List Present:
419   Power Management Capability, Version 1.1
420     Does not support low power State D1 or D2
421     Supports PME# signalling from mode(s) D0, D3hot, D3cold
422     PME# signalling is currently disabled
423     3.3v AUX Current required : 0 mA (Self powered)
424     Current Power State : D0 (Device operational, no power saving)
425      1900 mW D0 power consume
426      1900 mW D0 power dissipate
427      1900 mW D1 power consume
428      1900 mW D1 power dissipate
429      1900 mW D2 power consume
430      1900 mW D2 power dissipate
431       100 mW D3 power consume
432       100 mW D3 power dissipate
433         0 mW common logic power consume
434
435 Bus 6 (PCI), Device Number 7, Device Function 0
436 Vendor 10ECh Realtek Semiconductor
437 Device 8169h RTL8169 Gigabit Ethernet Adapter
438 Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
439   System Errors)
440 Status 02B8h (Signalled Interrupt, Has Capabilities List, Supports 66MHz,
441   Supports Back-To-Back Trans., Medium Timing)
442 Revision 10h, Header Type 00h, Bus Latency Timer 20h
443 Minimum Bus Grant 20h, Maximum Bus Latency 40h
444 Self test 00h (Self test not supported)
445 Cache line size 32 Bytes (8 DWords)
446 PCI Class Network, type Ethernet
447 Subsystem ID 109417C0h Unknown
448 Subsystem Vendor 17C0h Wistron Corporation
449 Address 0 is an I/O Port : 4000h..40FFh
450 Address 1 is a Memory Address (0-4GiB) : B8007000h..B80070FFh
451 System IRQ 10, INT# A
452 Expansion ROM of 128 KiB decoded by this card, currently disabled
453 New Capabilities List Present:
454   Power Management Capability, Version 1.1
455     Supports low power State D1
456     Supports low power State D2
457     Supports PME# signalling from mode(s) D1, D2, D3hot, D3cold
458     PME# signalling is currently disabled
459     3.3v AUX Current required : 375 mA
460     Current Power State : D0 (Device operational, no power saving)
461
462 Bus 6 (PCI), Device Number 9, Device Function 0
463 Vendor 104Ch Texas Instruments (TI)
464 Device 8031h PCIxx21/x515 Cardbus Controller
465 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
466 Status 0210h (Has Capabilities List, Medium Timing)
467 Revision 00h, Header Type 82h, Bus Latency Timer 51h
468 Self test 00h (Self test not supported)
469 Cache line size 32 Bytes (8 DWords)
470 PCI Class Bridge, type PCI to Cardbus
471 Subsystem ID 300717C0h Unknown
472 Subsystem Vendor 17C0h Wistron Corporation
473 System IRQ 10, INT# A
474 CardBus Bridge Information:
475   PCI Bus Number 6, CardBus Bus Number 7, Subordinate Bus number 7
476   CardBus Latency 24h
477   Secondary Bus Command 03C4h (ISA mapping, bus is in RESET,
478     ints routed by ExCA)
479   Secondary Bus Status  0200h (Medium Timing)
480   Socket/ExCa Base Memory Address : B8008000h..B8008FFFh
481   Memory   Range 0 : FFF00000h..000FFFFFh, prefetchable
482   Memory   Range 1 : None
483   I/O Port Range 0 : F000h..0FFFh
484   I/O Port Range 1 : None
485 New Capabilities List Present:
486   Power Management Capability, Version 1.1
487     Supports low power State D1
488     Supports low power State D2
489     Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
490     PME# signalling is currently disabled
491     3.3v AUX Current required : 0 mA (Self powered)
492     Current Power State : D0 (Device operational, no power saving)
493
494 Bus 6 (PCI), Device Number 9, Device Function 2
495 Vendor 104Ch Texas Instruments (TI)
496 Device 8032h OHCI Compliant IEEE-1394 FireWire Controller
497 Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors)
498 Status 0210h (Has Capabilities List, Medium Timing)
499 Revision 00h, Header Type 80h, Bus Latency Timer 20h
500 Minimum Bus Grant 02h, Maximum Bus Latency 04h
501 Self test 00h (Self test not supported)
502 Cache line size 32 Bytes (8 DWords)
503 PCI Class Serial, type OHCI FireWire
504 Subsystem ID 300717C0h Unknown
505 Subsystem Vendor 17C0h Wistron Corporation
506 Address 0 is a Memory Address (0-4GiB) : B8007800h..B8007FFFh
507 Address 1 is a Memory Address (0-4GiB) : B8000000h..B8003FFFh
508 System IRQ 10, INT# A
509 New Capabilities List Present:
510   Power Management Capability, Version 1.1
511     Supports low power State D1
512     Supports low power State D2
513     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
514     PME# signalling is currently disabled
515     3.3v AUX Current required : 0 mA (Self powered)
516     Current Power State : D0 (Device operational, no power saving)
517
518 Bus 6 (PCI), Device Number 9, Device Function 3
519 Vendor 104Ch Texas Instruments (TI)
520 Device 8033h PCIxx11/21 Integrated FlashMedia Controller
521 Command 0106h (Memory Access, BusMaster, System Errors)
522 Status 0210h (Has Capabilities List, Medium Timing)
523 Revision 00h, Header Type 80h, Bus Latency Timer 39h
524 Minimum Bus Grant 07h, Maximum Bus Latency 04h
525 Self test 00h (Self test not supported)
526 Cache line size 32 Bytes (8 DWords)
527 PCI Class Storage, type Other
528 Subsystem ID 300717C0h Unknown
529 Subsystem Vendor 17C0h Wistron Corporation
530 Address 0 is a Memory Address (0-4GiB) : B8004000h..B8005FFFh
531 System IRQ 10, INT# A
532 New Capabilities List Present:
533   Power Management Capability, Version 1.1
534     Supports low power State D1
535     Supports low power State D2
536     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
537     PME# signalling is currently disabled
538     3.3v AUX Current required : 0 mA (Self powered)
539     Current Power State : D0 (Device operational, no power saving)
540
541 Bus 6 (PCI), Device Number 9, Device Function 4
542 Vendor 104Ch Texas Instruments (TI)
543 Device 8034h SDA Standard Compliant SD Host Controller
544 Command 0106h (Memory Access, BusMaster, System Errors)
545 Status 0210h (Has Capabilities List, Medium Timing)
546 Revision 00h, Header Type 80h, Bus Latency Timer 39h
547 Minimum Bus Grant 07h, Maximum Bus Latency 04h
548 Self test 00h (Self test not supported)
549 Cache line size 32 Bytes (8 DWords)
550 PCI Class System, type SD Host Controller (Without DMA)
551 Subsystem ID 300717C0h Unknown
552 Subsystem Vendor 17C0h Wistron Corporation
553 Address 0 is a Memory Address (0-4GiB) : B8009400h..B80094FFh
554 Address 1 is a Memory Address (0-4GiB) : B8009000h..B80090FFh
555 Address 2 is a Memory Address (0-4GiB) : B8007400h..B80074FFh
556 System IRQ 10, INT# A
557 New Capabilities List Present:
558   Power Management Capability, Version 1.1
559     Supports low power State D1
560     Supports low power State D2
561     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
562     PME# signalling is currently disabled
563     3.3v AUX Current required : 0 mA (Self powered)
564     Current Power State : D0 (Device operational, no power saving)
565
566ROM PCI IRQ routing table Tests....
567 ROM IRQ routing table found at F000h:DE80h
568 Table Version 1.0 - OK
569 Table size 0 bytes - Invalid Size!
570 IRQ's dedicated to PCI : None
571 The ROM PCI IRQ routing table appears to be faulty!!
572
573IRQ Summary: IRQs 10,11,14 are used by PCI devices
574Shared IRQs: IRQ 10 is shared by 9 PCI Devices
575             IRQ 11 is shared by 8 PCI Devices