Ticket #251: acpi-smp-apic.log

File acpi-smp-apic.log, 17.8 KB (added by eco, 16 years ago)
Line 
1AllocIRQMem at 0xFFE88000 (24576 bytes)
2
3PSD_install options:" /FS /SMP /APIC /CD" @#netlabs dot org:3.9#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Apr 23 2008 03:50:52
4MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
5New Stack = FFD00000 Size:0x8000
6AcpiOsInitialize ALLOC size 65536 at 0xF96C0000
7AcpiOsInitialize MapMem size 4096 at 0xFFE9D000
8AcpiOsCreateLock F9C0733C
9AcpiOsCreateLock F9C0CD04
10AcpiOsPredefinedOverride: "_REV"
11AcpiOsPredefinedOverride: "_OS_"
12AcpiOsPredefinedOverride: override to eComStation
13AcpiOsPredefinedOverride: "_GL_"
14AcpiOsPredefinedOverride: "_OSI"
15*** AcpiInitializeSubsystem Status = 0 ***
16ACPI: RSDP @ 0xFBCB0/0x24 (v2 DELL )
17ACPI: XSDT @ 0x7F66F200/0x64 (v1 DELL M08 0x27D80107 ASL 0x61)
18ACPI: FACP @ 0x7F66F09C/0xF4 (v4 DELL M08 0x27D80107 ASL 0x61)
19ACPI: DSDT @ 0x7F66F800/0x53D4 (v2 INT430 SYSFexxx 0x1001 INTL 0x20050624)
20ACPI: FACS @ 0x7F67E000/0x40
21ACPI: HPET @ 0x7F66F300/0x38 (v1 DELL M08 0x1 ASL 0x61)
22ACPI: APIC @ 0x7F66F400/0x68 (v1 DELL M08 0x27D80107 ASL 0x47)
23ACPI: MCFG @ 0x7F66F3C0/0x3E (v16 DELL M08 0x27D80107 ASL 0x61)
24ACPI: SLIC @ 0x7F66F49C/0x176 (v1 DELL M08 0x27D80107 ASL 0x61)
25ACPI: OSFR @ 0x7F66EA00/0x2C (v1 DELL M08 0x27D80107 ASL 0x61)
26ACPI: BOOT @ 0x7F66EFC0/0x28 (v1 DELL M08 0x27D80107 ASL 0x61)
27ACPI: SSDT @ 0x7F66D9C0/0x4CC (v1 PmRef CpuPm 0x3000 INTL 0x20050624)
28*** AcpiInitializeTables Status = 0 ***
29AcpiOsTableOverride Ex:FFE82800 New:FFCFFFC4 SIG:[DSDT]
30*** AcpiLoadTables Status = 0 ***
31Table [DSDT]
32Table [FACS]
33Table [FACP]
34Table [HPET]
35Table [APIC]
36Local APIC address: FEE00000h
37System also has 8259
38APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
39APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable
40APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
41APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
42APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
43APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
44APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
45Table [MCFG]
46Table [SLIC]
47Table [OSFR]
48Table [BOOT]
49Table [SSDT]
50Size of FACDT 244
51Type of computer - Mobile
52System vector the SCI interrupt is wired to in 8259 mode. 9
53System port address of the SMI Command Port 0xB2
54The value to write to SMI_CMD to disable SMI 0x70
55The value to write to SMI_CMD to re-enable SMI 0x71
56The value to write to SMI_CMD to enter the S4BIOS state 0x97
57The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0x80
58System port address of the PM1a Event Register Block 1000
59System port address of the PM1b Event Register Block 0
60Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
61System port address of the PM1a Control Register Block 1004
62System port address of the PM1b Control Register Block 0
63Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
64System port address of the PM2 Control Register Block 1020
65Number of bytes decoded by PM2_CNT_BLK 1
66System port address of the Power Management Timer Control Register Block 1008
67Number of bytes decoded by PM_TMR_BLK (=4) 4
68System port address of General-Purpose Event 0 Register Block 1028
69System port address of General-Purpose Event 1 Register Block 0
70Number of bytes decoded by GPE0_BLK 0x8
71Number of bytes decoded by GPE1_BLK 0x0
72Offset within the ACPI general-purpose event model where GPE1 based events start 0
73GPE enable register: 40: 0: 0: 1
74GPE status register: 0: 80: 42: 8
75The system does not support a C2 state. 96
76The worst-case hardware latency to enter and exit a C3 state 250 us
77The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
78The bit width of the processor's duty cycle setting value in the P_CNT register 3
79The RTC CMOS RAM index to the day-of-month alarm value 13
80The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
81IA-PC Boot Architecture Flags 0x2
82Fixed feature flags 82BD
83The reset register:
84Type of address space - System I/O
85Register Bit Width 0
86Register Bit Offset 0
87Access size 0
88Address 0
89The value to write to the RESET_REG port to reset the system 0
90***** Throttl Width 3 Offset 1
91AcpiOsInstallIntterrupHandler IRQ9 handler F96F1D49
92** AcpiEnableSubsystem Status = 0
93AcpiOsDerivePCIID([PCI0] ,[PIR1],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
94AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
95** Scan EC Status = 0
96AcpiOsDerivePCIID([PCI0] ,[IGDP],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
97AcpiOsDerivePCIID([PCI0] ,[MCHP],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
98AcpiOsSleep 0 ms
99** AcpiInitializeObjects mask:0 Status = 0
100Processor [CPU0]
101Processor [CPU1]
102Status 0x0 0
103Current IRQs line 24
104ACPI Error (dsopcode-398): No pointer back to NS node in buffer obj F96C0E28 [20080321]
105ACPI Error (psparse-627): Method parse/execution failed [\_PR_.CPU0._PDC] (Node F96B57C0), AE_AML_INTERNAL
106Status Evaluate Processor PDC 0x3011 AE_AML_INTERNAL
107Status Evaluate Processor 0x0 AE_OK
108Usable:2 Counter:0
109 CPU id to N:0
110 ProcId: 0x0
111 P_BLK: 0x1010
112 P_BLK len: 0x6
113CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
114ACPI Error (dsopcode-398): No pointer back to NS node in buffer obj F96C0E28 [20080321]
115ACPI Error (psparse-627): Method parse/execution failed [\_PR_.CPU1._PDC] (Node F96B5908), AE_AML_INTERNAL
116Status Evaluate Processor PDC 0x3011 AE_AML_INTERNAL
117Status Evaluate Processor 0x0 AE_OK
118Usable:2 Counter:1
119 CPU id to N:1
120 ProcId: 0x1
121 P_BLK: 0x1010
122 P_BLK len: 0x6
123CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
124PSDFree: at 0xFE5F3000 success!
125Found bridge "PCI0" BBN is absent status:5
126Finding:0 bridges
1270:0.0 Class:600 Hdr:0 Bridge H->0
1280:2.0 Class:300 Hdr:80
1290:2.1 Class:380 Hdr:80
1300:26.0 Class:C03 Hdr:80
1310:26.1 Class:C03 Hdr:0
1320:26.7 Class:C03 Hdr:0
1330:27.0 Class:403 Hdr:0
1340:28.0 Class:604 Hdr:81 Bridge 0->9
1350:28.1 Class:604 Hdr:81 Bridge 0->11
1360:28.4 Class:604 Hdr:81 Bridge 0->12..13
1370:29.0 Class:C03 Hdr:80
1380:29.1 Class:C03 Hdr:0
1390:29.2 Class:C03 Hdr:0
1400:29.7 Class:C03 Hdr:0
1410:30.0 Class:604 Hdr:1 Bridge 0->2
1420:31.0 Class:601 Hdr:80
1430:31.1 Class:101 Hdr:0
1440:31.2 Class:106 Hdr:0
1450:31.3 Class:C05 Hdr:0
1462:9.0 Class:C00 Hdr:80
1472:9.1 Class:805 Hdr:80
1482:9.2 Class:880 Hdr:80
1492:9.3 Class:880 Hdr:80
1502:9.4 Class:880 Hdr:80
1519:0.0 Class:200 Hdr:0
15211:0.0 Class:280 Hdr:0
153PCI Bus scan: 14 PCI buses found.
154Scan ACPI tree for PCI functions
1550:0.0 'PCI0' (F96C3798)
1560:31.0 'ISAB' (F96C38F8)
1570:30.0 'PCIE' (F96C4900)
1582:9.0 'CRD0' (F96C4978)
1592:9.1 'CRD1' (F96C4A78)
1600:29.0 'USB1' (F96C4C98)
1610:29.1 'USB2' (F96C4F18)
1620:29.2 'USB3' (F96C5118)
1630:26.0 'USB4' (F96C5318)
1640:26.1 'USB5' (F96C5518)
1650:26.7 'EHC2' (F96C5718)
1660:29.7 'EHCI' (F96C5A08)
1670:31.2 'IDE0' (F96C5D98)
1680:31.1 'IDE1' (F96C78F0)
1690:27.0 'AZAL' (F96C85E0)
1700:2.0 'VID_' (F96C8658)
1710:2.1 'VID2' (F96CA8D0)
1720:28.0 'RP01' (F96CACB8)
1739:0.0 'PXS1' (F96CAF40)
1740:28.1 'RP02' (F96CB050)
17511:0.0 'PXS2' (F96CB290)
1760:28.2 'RP03' (F96CB3A0)
1770:28.3 'RP04' (F96CB6F0)
1780:28.4 'RP05' (F96CBA40)
17912:0.0 'PXS5' (F96CBC80)
1800:28.5 'RP06' (F96CBD90)
181Bridges found:
1820:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96C3798) _PRT
1830:30.0 class:604 type: 1 Bus 0->2 ACPI: 'PCIE' (F96C4900) _PRT
1840:28.0 class:604 type: 1 Bus 0->9 ACPI: 'RP01' (F96CACB8) _PRT
1850:28.1 class:604 type: 1 Bus 0->11 ACPI: 'RP02' (F96CB050) _PRT
1860:28.4 class:604 type: 1 Bus 0->12 ACPI: 'RP05' (F96CBA40) _PRT
187IRQLinks found:
1880: 'LNKC' (F96CCAF8) P[ 9, 10, 11] <- 2:9.4 2:9.3 2:9.2 2:9.1 0:31.1
189 A[]
1901: 'LNKB' (F96CC8D8) P[ 5, 7] <- 11:0.0 0:31.3 0:31.2
191 A[]
1922: 'LNKD' (F96CCD18) P[]
193 A[]
1943: 'LNKA' (F96CC6B8) P[ 9, 10,*11] <- 9:0.0 2:9.0 0:2.0
195 A[]
1964: 'LNKE' (F96CCF38) P[ 3, 4, 5, 6, 7, 9,*10, 11, 12, 14, 15] <- 0:29.7 0:29.0 0:26.0
197 A[]
1985: 'LNKF' (F96CD158) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:29.1 0:27.0 0:26.1
199 A[]
2006: 'LNKG' (F96CD378) P[ 3, 4, 5, 6,*7, 9, 10, 11, 12, 14, 15] <- 0:29.2 0:26.7
201 A[]
2027: 'LNKH' (F96CD598) P[]
203 A[]
204PCI devices found:
2050:0.0 8086:2A00 'PCI0'
2060:2.0 8086:2A02 'VID_' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 Set: 16 MSI
2070:2.1 8086:2A03 'VID2'
2080:26.0 8086:2834 'USB4' IRQs: PCI:10 PIC:'LNKE':10 APIC:20 Set: 20
2090:26.1 8086:2835 'USB5' IRQs: PCI:9 PIC:'LNKF':9 APIC:21 Set: 21
2100:26.7 8086:283A 'EHC2' IRQs: PCI:7 PIC:'LNKG':7 APIC:22 Set: 22
2110:27.0 8086:284B 'AZAL' IRQs: PCI:9 PIC:'LNKF':9 APIC:21 Set: 21 MSI
2120:28.0 8086:283F 'RP01'
2130:28.1 8086:2841 'RP02'
2140:28.4 8086:2847 'RP05'
2150:29.0 8086:2830 'USB1' IRQs: PCI:10 PIC:'LNKE':10 APIC:20 Set: 20
2160:29.1 8086:2831 'USB2' IRQs: PCI:9 PIC:'LNKF':9 APIC:21 Set: 21
2170:29.2 8086:2832 'USB3' IRQs: PCI:7 PIC:'LNKG':7 APIC:22 Set: 22
2180:29.7 8086:2836 'EHCI' IRQs: PCI:10 PIC:'LNKE':10 APIC:20 Set: 20
2190:30.0 8086:2448 'PCIE'
2200:31.0 8086:2815 'ISAB'
2210:31.1 8086:2850 'IDE1' IRQs: PCI:11 PIC:'LNKC': R 11 APIC:16 Set: 16
2220:31.2 8086:2829 'IDE0' IRQs: PCI:10 PIC:'LNKB': R 10 APIC:17 Set: 17 MSI
2230:31.3 8086:283E IRQs: PCI:10 PIC:'LNKB': R 10 APIC:17 Set: 17
2242:9.0 1180:832 'CRD0' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 Set: 16
2252:9.1 1180:822 'CRD1' IRQs: PCI:5 PIC:'LNKC': R 5 APIC:18 Set: 18
2262:9.2 1180:843 IRQs: PCI:5 PIC:'LNKC': R 5 APIC:18 Set: 18
2272:9.3 1180:592 IRQs: PCI:5 PIC:'LNKC': R 5 APIC:18 Set: 18
2282:9.4 1180:852 IRQs: PCI:5 PIC:'LNKC': R 5 APIC:18 Set: 18
2299:0.0 11AB:4354 'PXS1' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 Set: 16 MSI
23011:0.0 14E4:4315 'PXS2' IRQs: PCI:11 PIC:'LNKB': R 11 APIC:17 Set: 17 MSI
231Max IRQ number in use - 22
232Bus detected - 13
233AcpiOsExecute type:2
234======= ACPIOSExecute 0 function ===========
235AcpiOsExecute type:1
236AcpiOsExecute - direct executing
237*** Device Notify ***
238Dev: [CPU0] Value:80
239CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
240AcpiOsExecute type:1
241AcpiOsExecute - direct executing
242*** Device Notify ***
243Dev: [CPU1] Value:80
244CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
245** AcpiInstall Power Device Status = 0
246ACPI Error (evxfevnt-288): Could not enable SleepButton event [20080321]
247ACPI Warning (evxface-235): Could not enable fixed event 3 [20080321]
248** AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
249** AcpiInstall PMTimer Device Status = 0
250** Total use:133896 unuse:26296 count:2341 **
251Get GpeHdl Status = 0 - AE_OK
252Event [_L01]
253Install GPE0x1 Status 0x0
254Event [_L17]
255Install GPE0x17 Status 0x0
256Event [_L1C]
257Install GPE0x1C Status 0x0
258Event [_L0B]
259Install GPE0xB Status 0x0
260Event [_L18]
261Install GPE0x18 Status 0x0
262Event [_L03]
263Install GPE0x3 Status 0x0
264Event [_L04]
265Install GPE0x4 Status 0x0
266Event [_L0C]
267Install GPE0xC Status 0x0
268Event [_L0E]
269Install GPE0xE Status 0x0
270Event [_L05]
271Install GPE0x5 Status 0x0
272Event [_L0D]
273Install GPE0xD Status 0x0
274Event [_L09]
275Install GPE0x9 Status 0x0
276Event [_L06]
277Install GPE0x6 Status 0x0
278EndScan GPE Status 0
279===== Info ========
280Int Level 9
281In Xrupt F96B5C68 in arg F96B5C68
282 Node
283Name [_GPE]
284Flags: 0
285Reg count 4
286GPE0x1 Flag:0x4 Status - Set 0x0 Enable 0x0
287GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
288GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
289GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
290GPE0x6 Flag:0x4 Status - Set 0x0 Enable 0x0
291GPE0 Status:1028 Enable:102C EnableWake:38 EnableRun:42 BaseGPENumber:0
292GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0
293GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
294GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
295GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
296GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
297GPE1 Status:1029 Enable:102D EnableWake:7A EnableRun:0 BaseGPENumber:8
298GPE0x17 Flag:0x4 Status - Set 0x0 Enable 0x0
299GPE2 Status:102A Enable:102E EnableWake:0 EnableRun:80 BaseGPENumber:10
300GPE0x18 Flag:0x4 Status - Set 0x0 Enable 0x0
301GPE0x1C Flag:0x2 Status - Set 0x0 Enable 0x0
302GPE3 Status:102B Enable:102F EnableWake:10 EnableRun:1 BaseGPENumber:18
303=========== Status 0x0 0
304** GpeHandler F96B9710 n 17 **
305AcpiOsExecute type:1
306======= ACPIOSExecute 1 function ===========
307---- GPE 17 exec-----
308AcpiOsExecute type:1
309AcpiOsExecute - direct executing
310*** Device Notify ***
311Dev: [CPU0] Value:80
312CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
313AcpiOsExecute type:1
314AcpiOsExecute - direct executing
315*** Device Notify ***
316Dev: [CPU1] Value:80
317CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
318GPE 17 status 0 - AE_OK
319GPE Enable 17 status 0 - AE_OK
320** GpeHandler F96B9710 n 17 **
321AcpiOsExecute type:1
322======= ACPIOSExecute 2 function ===========
323---- GPE 17 exec-----
324AcpiOsExecute type:1
325AcpiOsExecute - direct executing
326*** Device Notify ***
327Dev: [CPU0] Value:80
328CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
329AcpiOsExecute type:1
330AcpiOsExecute - direct executing
331*** Device Notify ***
332Dev: [CPU1] Value:80
333CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
334GPE 17 status 0 - AE_OK
335GPE Enable 17 status 0 - AE_OK
336** GpeHandler F96B9710 n 17 **
337AcpiOsExecute type:1
338======= ACPIOSExecute 3 function ===========
339---- GPE 17 exec-----
340AcpiOsExecute type:1
341AcpiOsExecute - direct executing
342*** Device Notify ***
343Dev: [CPU0] Value:80
344CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
345AcpiOsExecute type:1
346AcpiOsExecute - direct executing
347*** Device Notify ***
348Dev: [CPU1] Value:80
349CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
350GPE 17 status 0 - AE_OK
351GPE Enable 17 status 0 - AE_OK
352** GpeHandler F96B9710 n 17 **
353AcpiOsExecute type:1
354======= ACPIOSExecute 4 function ===========
355---- GPE 17 exec-----
356AcpiOsExecute type:1
357AcpiOsExecute - direct executing
358*** Device Notify ***
359Dev: [CPU0] Value:80
360CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
361AcpiOsExecute type:1
362AcpiOsExecute - direct executing
363*** Device Notify ***
364Dev: [CPU1] Value:80
365CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
366GPE 17 status 0 - AE_OK
367GPE Enable 17 status 0 - AE_OK
368** GpeHandler F96B9710 n 17 **
369AcpiOsExecute type:1
370======= ACPIOSExecute 5 function ===========
371---- GPE 17 exec-----
372AcpiOsExecute type:1
373AcpiOsExecute - direct executing
374*** Device Notify ***
375Dev: [CPU0] Value:80
376CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
377AcpiOsExecute type:1
378AcpiOsExecute - direct executing
379*** Device Notify ***
380Dev: [CPU1] Value:80
381CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
382GPE 17 status 0 - AE_OK
383GPE Enable 17 status 0 - AE_OK
384** GpeHandler F96B9710 n 17 **
385AcpiOsExecute type:1
386======= ACPIOSExecute 6 function ===========
387---- GPE 17 exec-----
388AcpiOsExecute type:1
389AcpiOsExecute - direct executing
390*** Device Notify ***
391Dev: [CPU0] Value:80
392CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
393AcpiOsExecute type:1
394AcpiOsExecute - direct executing
395*** Device Notify ***
396Dev: [CPU1] Value:80
397CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
398GPE 17 status 0 - AE_OK
399GPE Enable 17 status 0 - AE_OK
400** GpeHandler F96B9710 n 17 **
401AcpiOsExecute type:1
402======= ACPIOSExecute 7 function ===========
403---- GPE 17 exec-----
404AcpiOsExecute type:1
405AcpiOsExecute - direct executing
406*** Device Notify ***
407Dev: [CPU0] Value:80
408CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
409AcpiOsExecute type:1
410AcpiOsExecute - direct executing
411*** Device Notify ***
412Dev: [CPU1] Value:80
413CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
414GPE 17 status 0 - AE_OK
415GPE Enable 17 status 0 - AE_OK
416** GpeHandler F96B9710 n 17 **
417AcpiOsExecute type:1
418======= ACPIOSExecute 8 function ===========
419---- GPE 17 exec-----
420AcpiOsExecute type:1
421AcpiOsExecute - direct executing
422*** Device Notify ***
423Dev: [CPU0] Value:80
424CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
425AcpiOsExecute type:1
426AcpiOsExecute - direct executing
427*** Device Notify ***
428Dev: [CPU1] Value:80
429CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
430GPE 17 status 0 - AE_OK
431GPE Enable 17 status 0 - AE_OK
432** GpeHandler F96B9710 n 17 **
433AcpiOsExecute type:1
434APM: PSD find success. PSD Ftable:F9C001D0
435Register Notify 1st FFCD71CE
436======= ACPIOSExecute 9 function ===========
437---- GPE 17 exec-----
438AcpiOsExecute type:1
439AcpiOsExecute - direct executing
440*** Device Notify ***
441Dev: [CPU0] Value:80
442CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
443Calling FFCD71CE
444APM: ******** Notify: 80 *********
445APM: ******** End Notify: 80 *********
446AcpiOsExecute type:1
447AcpiOsExecute - direct executing
448*** Device Notify ***
449Dev: [CPU1] Value:80
450CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
451Calling FFCD71CE
452APM: ******** Notify: 80 *********
453APM: ******** End Notify: 80 *********
454GPE 17 status 0 - AE_OK
455GPE Enable 17 status 0 - AE_OK
456FindPCIDevice
457 Need: B:0 D:1F F:1
458Finding APIC16 PIC11 Dev: [IDE1]
459FindPCIDevice
460 Need: B:0 D:1F F:2
461Finding APIC17 PIC10 Dev: [IDE0]
462** GpeHandler F96B9710 n 17 **
463AcpiOsExecute type:1
464Gradd: PSD find success. PSD Ftable:F9C001D0
465APM: Found AC "AC__"
466APM: Found Smart Battery "BAT0"
467======= ACPIOSExecute 10 function ===========
468---- GPE 17 exec-----
469AcpiOsExecute type:1
470AcpiOsExecute - direct executing
471*** Device Notify ***
472Dev: [CPU0] Value:80
473CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
474Calling FFCD71CE
475APM: ******** Notify: 80 *********
476APM: ******** End Notify: 80 *********
477AcpiOsExecute type:1
478AcpiOsExecute - direct executing
479*** Device Notify ***
480Dev: [CPU1] Value:80
481CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
482Calling FFCD71CE
483APM: ******** Notify: 80 *********
484APM: ******** End Notify: 80 *********
485GPE 17 status 0 - AE_OK
486GPE Enable 17 status 0 - AE_OK
487******** Event tread ***************
488APM: Unsetting suspend state
489******** Notify wait Counter 0 ***************
490SetCPU to 0 need 0 wait 1
491AcpiExecSMPFunction:Fun:0xFA39486C Ctx:FA3D4030 Flag:0xA00 Current CPU0
492AcpiExecSMPFunction: wait CPUMask:0x3
493Count:1 CPU1 FA3D4030
494CPU1 end
495Count:2 CPU0 FA3D4030
496CPU0 end
497AcpiExecSMPFunction: End