1 | AllocIRQMem at 0xFFE8A000 (24576 bytes)
|
---|
2 |
|
---|
3 | PSD_install options:" /SMP /APIC /R /!NOD" @#netlabs dot org:3.8#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Mar 28 2008 14:23:59
|
---|
4 | MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
|
---|
5 | New Stack = FFE8A000 Size:0x8000
|
---|
6 | AcpiOsInitialize ALLOC size 65536 at 0xF9590000
|
---|
7 | AcpiOsInitialize MapMem size 4096 at 0xFFDEF000
|
---|
8 | AcpiOsCreateLock F95B7338
|
---|
9 | AcpiOsCreateLock F95BCD04
|
---|
10 | AcpiOsPredefinedOverride: "_REV"
|
---|
11 | AcpiOsPredefinedOverride: "_OS_"
|
---|
12 | AcpiOsPredefinedOverride: override to eComStation
|
---|
13 | AcpiOsPredefinedOverride: "_GL_"
|
---|
14 | AcpiOsPredefinedOverride: "_OSI"
|
---|
15 | AcpiOsPredefinedOverride: override to eCS
|
---|
16 | *** AcpiInitializeSubsystem Status = 0 ***
|
---|
17 | ACPI: RSDP @ 0xF7570/0x24 (v2 Nvidia)
|
---|
18 | ACPI: XSDT @ 0x7FEF30C0/0x44 (v1 Nvidia ASUSACPI 0x42302E31 AWRD 0x0)
|
---|
19 | ACPI: FACP @ 0x7FEFB440/0xF4 (v3 Nvidia ASUSACPI 0x42302E31 AWRD 0x0)
|
---|
20 | ACPI: DSDT @ 0x7FEF3240/0x81C0 (v1 NVIDIA ASUSACPI 0x1000 MSFT 0x3000000)
|
---|
21 | ACPI: FACS @ 0x7FEF0000/0x40
|
---|
22 | ACPI: SSDT @ 0x7FEFB640/0x206 (v1 PTLTD POWERNOW 0x1 LTP 0x1)
|
---|
23 | ACPI: MCFG @ 0x7FEFB940/0x3C (v1 Nvidia ASUSACPI 0x42302E31 AWRD 0x0)
|
---|
24 | ACPI: APIC @ 0x7FEFB580/0x7C (v1 Nvidia ASUSACPI 0x42302E31 AWRD 0x0)
|
---|
25 | *** AcpiInitializeTables Status = 0 ***
|
---|
26 | AcpiOsTableOverride Ex:FFCFA240 New:FFE89FC4 SIG:[DSDT]
|
---|
27 | *** AcpiLoadTables Status = 0 ***
|
---|
28 | Table [DSDT]
|
---|
29 | Table [FACS]
|
---|
30 | Table [FACP]
|
---|
31 | Table [SSDT]
|
---|
32 | Table [MCFG]
|
---|
33 | Table [APIC]
|
---|
34 | Local APIC address: FEE00000h
|
---|
35 | System also has 8259
|
---|
36 | APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
|
---|
37 | APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable
|
---|
38 | APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
|
---|
39 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 0 - Polarity active: Bus spec Trigger by: Bus spec
|
---|
40 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
|
---|
41 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 14 Global SysInt 14 - Polarity active: High 0 Trigger by: Edge
|
---|
42 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 15 Global SysInt 15 - Polarity active: High 0 Trigger by: Edge
|
---|
43 | APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
|
---|
44 | APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
|
---|
45 | Size of FACDT 244
|
---|
46 | Type of computer - Desktop
|
---|
47 | System vector the SCI interrupt is wired to in 8259 mode. 9
|
---|
48 | System port address of the SMI Command Port 0x442E
|
---|
49 | The value to write to SMI_CMD to disable SMI 0xA1
|
---|
50 | The value to write to SMI_CMD to re-enable SMI 0xA0
|
---|
51 | The value to write to SMI_CMD to enter the S4BIOS state 0x0
|
---|
52 | System port address of the PM1a Event Register Block 4000
|
---|
53 | System port address of the PM1b Event Register Block 0
|
---|
54 | Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
|
---|
55 | System port address of the PM1a Control Register Block 4004
|
---|
56 | System port address of the PM1b Control Register Block 0
|
---|
57 | Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
|
---|
58 | System port address of the PM2 Control Register Block 401C
|
---|
59 | Number of bytes decoded by PM2_CNT_BLK 1
|
---|
60 | System port address of the Power Management Timer Control Register Block 4008
|
---|
61 | Number of bytes decoded by PM_TMR_BLK (=4) 4
|
---|
62 | System port address of General-Purpose Event 0 Register Block 4020
|
---|
63 | System port address of General-Purpose Event 1 Register Block 44A0
|
---|
64 | Number of bytes decoded by GPE0_BLK 0x8
|
---|
65 | Number of bytes decoded by GPE1_BLK 0x10
|
---|
66 | Offset within the ACPI general-purpose event model where GPE1 based events start 20
|
---|
67 | GPE enable register: 0: 0: 0: 0
|
---|
68 | GPE status register: 40: 0: 0: 0
|
---|
69 | The system does not support a C2 state. 65
|
---|
70 | The system does not support a C3 state 3E9
|
---|
71 | The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
|
---|
72 | The bit width of the processor's duty cycle setting value in the P_CNT register 3
|
---|
73 | The RTC CMOS RAM index to the day-of-month alarm value 125
|
---|
74 | The RTC CMOS RAM index to the month of year alarm value 126
|
---|
75 | The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
|
---|
76 | IA-PC Boot Architecture Flags 0x0
|
---|
77 | Fixed feature flags 4A5
|
---|
78 | The reset register:
|
---|
79 | Type of address space - System I/O
|
---|
80 | Register Bit Width 8
|
---|
81 | Register Bit Offset 0
|
---|
82 | Access size 0
|
---|
83 | Address 3321
|
---|
84 | The value to write to the RESET_REG port to reset the system 6
|
---|
85 | ***** Throttl Width 3 Offset 1
|
---|
86 | AcpiOsInstallIntterrupHandler IRQ9 handler F95F1BA9
|
---|
87 | ************ AcpiEnableSubsystem Status = 0
|
---|
88 | AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:10 Fun:0 - Derive: Bus:0 Dev:10 Fun:0
|
---|
89 | ************ Scan EC Status = 0
|
---|
90 | ************ AcpiInitializeObjects mask:0 Status = 0
|
---|
91 | Processor [CPU0]
|
---|
92 | Processor [CPU1]
|
---|
93 | Status 0x0 0
|
---|
94 | AcpiOsDerivePCIID([PCI0] ,[K181],) Bus:0 Dev:24 Fun:1 - Derive: Bus:0 Dev:24 Fun:1
|
---|
95 | AcpiOsDerivePCIID([PCI0] ,[GPUR],) Bus:0 Dev:5 Fun:0 - Derive: Bus:0 Dev:5 Fun:0
|
---|
96 | Current IRQs line 24
|
---|
97 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
|
---|
98 | Status Evaluate Processor 0x0 AE_OK
|
---|
99 | Usable:2 Counter:0
|
---|
100 | CPU id to N:0
|
---|
101 | ProcId: 0x0
|
---|
102 | P_BLK: 0x0
|
---|
103 | P_BLK len: 0x0
|
---|
104 | CPU0 Status Evaluate _PCT 0x0 AE_OK
|
---|
105 | Perf control: 0x0
|
---|
106 | Perf status: 0x0
|
---|
107 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
|
---|
108 | Status Evaluate Processor 0x0 AE_OK
|
---|
109 | Usable:2 Counter:1
|
---|
110 | CPU id to N:1
|
---|
111 | ProcId: 0x1
|
---|
112 | P_BLK: 0x0
|
---|
113 | P_BLK len: 0x0
|
---|
114 | CPU1 Status Evaluate _PCT 0x0 AE_OK
|
---|
115 | Perf control: 0x0
|
---|
116 | Perf status: 0x0
|
---|
117 | ************ AcpiInstall Power Device Status = 0
|
---|
118 | ACPI Error (evxfevnt-288): Could not enable SleepButton event [20080321]
|
---|
119 | ACPI Warning (evxface-235): Could not enable fixed event 3 [20080321]
|
---|
120 | ************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
|
---|
121 | ************ AcpiInstall PMTimer Device Status = 0
|
---|
122 | ** Total use:204696 unuse:7560 count:3940 **
|
---|
123 | Get GpeHdl Status = 0 - AE_OK
|
---|
124 | Event [_L11]
|
---|
125 | Install GPE0x11 Status 0x0
|
---|
126 | Event [_L00]
|
---|
127 | Install GPE0x0 Status 0x0
|
---|
128 | Event [_L03]
|
---|
129 | Install GPE0x3 Status 0x0
|
---|
130 | Event [_L0B]
|
---|
131 | Install GPE0xB Status 0x0
|
---|
132 | Event [_L0D]
|
---|
133 | Install GPE0xD Status 0x0
|
---|
134 | Event [_L05]
|
---|
135 | Install GPE0x5 Status 0x0
|
---|
136 | Event [_L07]
|
---|
137 | Install GPE0x7 Status 0x0
|
---|
138 | Event [_L10]
|
---|
139 | Install GPE0x10 Status 0x0
|
---|
140 | Event [_L15]
|
---|
141 | Install GPE0x15 Status 0x0
|
---|
142 | EndScan GPE Status 0
|
---|
143 | ===== Info ========
|
---|
144 | Int Level 9
|
---|
145 | In Xrupt F9572788 in arg F9572788
|
---|
146 | Node
|
---|
147 | Name [_GPE]
|
---|
148 | Flags: 0
|
---|
149 | Reg count 4
|
---|
150 | GPE0x0 Flag:0x2 Status - Set 0x0 Enable 0x0
|
---|
151 | GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
|
---|
152 | GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
|
---|
153 | GPE0x7 Flag:0x2 Status - Set 0x0 Enable 0x0
|
---|
154 | GPE0 Status:4020 Enable:4024 EnableWake:A9 EnableRun:0 BaseGPENumber:0
|
---|
155 | GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
|
---|
156 | GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
|
---|
157 | GPE1 Status:4021 Enable:4025 EnableWake:28 EnableRun:0 BaseGPENumber:8
|
---|
158 | GPE0x10 Flag:0x2 Status - Set 0x0 Enable 0x0
|
---|
159 | GPE0x11 Flag:0x2 Status - Set 0x0 Enable 0x0
|
---|
160 | GPE0x15 Flag:0x2 Status - Set 0x0 Enable 0x0
|
---|
161 | GPE2 Status:4022 Enable:4026 EnableWake:23 EnableRun:0 BaseGPENumber:10
|
---|
162 | GPE3 Status:4023 Enable:4027 EnableWake:0 EnableRun:0 BaseGPENumber:18
|
---|
163 | ===== Info ========
|
---|
164 | Int Level 9
|
---|
165 | In Xrupt F9572788 in arg F95729F8
|
---|
166 | Node
|
---|
167 | Name [_GPE]
|
---|
168 | Flags: 0
|
---|
169 | Reg count 8
|
---|
170 | GPE0 Status:44A0 Enable:44A8 EnableWake:0 EnableRun:0 BaseGPENumber:20
|
---|
171 | GPE1 Status:44A1 Enable:44A9 EnableWake:0 EnableRun:0 BaseGPENumber:28
|
---|
172 | GPE2 Status:44A2 Enable:44AA EnableWake:0 EnableRun:0 BaseGPENumber:30
|
---|
173 | GPE3 Status:44A3 Enable:44AB EnableWake:0 EnableRun:0 BaseGPENumber:38
|
---|
174 | GPE4 Status:44A4 Enable:44AC EnableWake:0 EnableRun:0 BaseGPENumber:40
|
---|
175 | GPE5 Status:44A5 Enable:44AD EnableWake:0 EnableRun:0 BaseGPENumber:48
|
---|
176 | GPE6 Status:44A6 Enable:44AE EnableWake:0 EnableRun:0 BaseGPENumber:50
|
---|
177 | GPE7 Status:44A7 Enable:44AF EnableWake:0 EnableRun:0 BaseGPENumber:58
|
---|
178 | =========== Status 0x0 0
|
---|
179 | PSDFree: at 0xF95A0000 success!
|
---|
180 | APM: PSD find success. PSD Ftable:F95B01D0
|
---|
181 | Register Notify 1st FFCDD1CE
|
---|
182 | FindPCIDevice
|
---|
183 | FindPCIDevice
|
---|
184 | Uniaud32: PSD find success. PSD Ftable:F95B01D0
|
---|
185 | FindPCIDevice
|
---|
186 | Gradd: PSD find success. PSD Ftable:F95B01D0
|
---|