| 1 | |
|---|
| 2 | PSD_install options:" /O1 /SMP /APIC /R" @#netlabs dot org:3.6a#@ACPI core PSD D |
|---|
| 3 | river. (c) netlabs.org 2005-2008 Build date: Jan 31 2008 13:19:44 |
|---|
| 4 | MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 |
|---|
| 5 | New Stack = FFD00000 Size:0x8000 |
|---|
| 6 | PSD_INIT ESP=0xFFCFFFE0 |
|---|
| 7 | AcpiOsInitialize ALLOC size 65536 at 0xF8DE0000 |
|---|
| 8 | AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 |
|---|
| 9 | AcpiOsCreateLock 8 |
|---|
| 10 | AcpiOsCreateLock 0 |
|---|
| 11 | AcpiOsPredefinedOverride: "_REV" |
|---|
| 12 | AcpiOsPredefinedOverride: "_OS_" |
|---|
| 13 | AcpiOsPredefinedOverride: override to eComStation |
|---|
| 14 | AcpiOsPredefinedOverride: "_GL_" |
|---|
| 15 | AcpiOsCreateSemaphore: O.K. Handle=0xF8DE03F8 M:1 I:0 |
|---|
| 16 | AcpiOsPredefinedOverride: "_OSI" |
|---|
| 17 | AcpiOsPredefinedOverride: override to eCS |
|---|
| 18 | *** AcpiInitializeSubsystem Status = 0 *** |
|---|
| 19 | ACPI: RSDP @ 0xFAA60/0x14 (v0 ACPIAM) |
|---|
| 20 | ACPI: RSDT @ 0x7FFB0000/0x3C (v1 122407 RSDT1648 0x20071224 MSFT 0x97) |
|---|
| 21 | ACPI: FACP @ 0x7FFB0200/0x84 (v2 122407 FACP1648 0x20071224 MSFT 0x97) |
|---|
| 22 | ACPI: DSDT @ 0x7FFB0440/0x71E2 (v1 1ADSL 1ADSL000 0x0 INTL 0x20051117) |
|---|
| 23 | ACPI: FACS @ 0x7FFBE000/0x40 |
|---|
| 24 | ACPI: APIC @ 0x7FFB0390/0x6C (v1 122407 APIC1648 0x20071224 MSFT 0x97) |
|---|
| 25 | ACPI: MCFG @ 0x7FFB0400/0x3C (v1 122407 OEMMCFG 0x20071224 MSFT 0x97) |
|---|
| 26 | ACPI: OEMB @ 0x7FFBE040/0x71 (v1 122407 OEMB1648 0x20071224 MSFT 0x97) |
|---|
| 27 | ACPI: HPET @ 0x7FFB7630/0x38 (v1 122407 OEMHPET 0x20071224 MSFT 0x97) |
|---|
| 28 | ACPI: SSDT @ 0x7FFB7670/0x28A (v1 A M I POWERNOW 0x1 AMD 0x1) |
|---|
| 29 | *** AcpiInitializeTables Status = 0 *** |
|---|
| 30 | AcpiOsTableOverride Ex:FFCDB440 New:FFCFFFAC SIG:[DSDT] |
|---|
| 31 | tbxface-619 [2] TbLoadNamespace: ACPI Tables successfully acquired |
|---|
| 32 | *** AcpiLoadTables Status = 0 *** |
|---|
| 33 | Table [DSDT] |
|---|
| 34 | Table [FACS] |
|---|
| 35 | Table [FACP] |
|---|
| 36 | Table [APIC] |
|---|
| 37 | Local APIC address: FEE00000h |
|---|
| 38 | System also has 8259 |
|---|
| 39 | APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable |
|---|
| 40 | APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable |
|---|
| 41 | APIC_PROCESSOR: ProcID 3h LocalApicID 82h - not usable |
|---|
| 42 | APIC_PROCESSOR: ProcID 4h LocalApicID 83h - not usable |
|---|
| 43 | APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 |
|---|
| 44 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spe |
|---|
| 45 | c Trigger by: Bus spec |
|---|
| 46 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Low 1 T |
|---|
| 47 | rigger by: Level |
|---|
| 48 | Table [MCFG] |
|---|
| 49 | Table [OEMB] |
|---|
| 50 | Table [HPET] |
|---|
| 51 | Table [SSDT] |
|---|
| 52 | Size of FACDT 244 |
|---|
| 53 | Type of computer - Unspecified |
|---|
| 54 | System vector the SCI interrupt is wired to in 8259 mode. 9 |
|---|
| 55 | System port address of the SMI Command Port 0xB0 |
|---|
| 56 | The value to write to SMI_CMD to disable SMI 0xE1 |
|---|
| 57 | The value to write to SMI_CMD to re-enable SMI 0x1E |
|---|
| 58 | The value to write to SMI_CMD to enter the S4BIOS state 0x0 |
|---|
| 59 | System port address of the PM1a Event Register Block 800 |
|---|
| 60 | System port address of the PM1b Event Register Block 0 |
|---|
| 61 | Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 |
|---|
| 62 | System port address of the PM1a Control Register Block 804 |
|---|
| 63 | System port address of the PM1b Control Register Block 0 |
|---|
| 64 | Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 |
|---|
| 65 | System port address of the PM2 Control Register Block 8FF |
|---|
| 66 | Number of bytes decoded by PM2_CNT_BLK 1 |
|---|
| 67 | System port address of the Power Management Timer Control Register Block 808 |
|---|
| 68 | Number of bytes decoded by PM_TMR_BLK (=4) 4 |
|---|
| 69 | System port address of General-Purpose Event 0 Register Block 820 |
|---|
| 70 | System port address of General-Purpose Event 1 Register Block 0 |
|---|
| 71 | Number of bytes decoded by GPE0_BLK 0x8 |
|---|
| 72 | Number of bytes decoded by GPE1_BLK 0x0 |
|---|
| 73 | Offset within the ACPI general-purpose event model where GPE1 based events start |
|---|
| 74 | 0 |
|---|
| 75 | GPE enable register: 0: 0: 0: 0 |
|---|
| 76 | GPE status register: 0: 0: 0: 40 |
|---|
| 77 | The system does not support a C2 state. 65 |
|---|
| 78 | The system does not support a C3 state 3E9 |
|---|
| 79 | The zero-based index of where the processor's duty cycle setting is within the p |
|---|
| 80 | rocessor's P_CNT register 4 |
|---|
| 81 | The bit width of the processor's duty cycle setting value in the P_CNT register |
|---|
| 82 | 3 |
|---|
| 83 | The RTC CMOS RAM index to the day-of-month alarm value 13 |
|---|
| 84 | The RTC CMOS RAM index to the century of data value (hundred and thousand year d |
|---|
| 85 | ecimals) 50 |
|---|
| 86 | IA-PC Boot Architecture Flags 0x0 |
|---|
| 87 | Fixed feature flags 1C1A5 |
|---|
| 88 | The reset register: |
|---|
| 89 | Type of address space - System I/O |
|---|
| 90 | Register Bit Width 8 |
|---|
| 91 | Register Bit Offset 0 |
|---|
| 92 | Access size 0 |
|---|
| 93 | Address 3321 |
|---|
| 94 | The value to write to the RESET_REG port to reset the system 6 |
|---|
| 95 | ***** Throttl Width 3 Offset 4 |
|---|
| 96 | evxfevnt-176 [2] Enable: Transition to ACPI mode successful |
|---|
| 97 | evgpeblk-1111 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x9 |
|---|
| 98 | AcpiOsInstallIntterrupHandler IRQ9 handler F8E6E9ED |
|---|
| 99 | evgpeblk-1211 [3] EvInitializeGpeBlock: Found 6 Wake, Enabled 11 Runtime GPEs in |
|---|
| 100 | this block |
|---|
| 101 | ************ AcpiEnableSubsystem Status = 0 |
|---|
| 102 | ************ Scan EC Status = 0 |
|---|
| 103 | Completing Region/Field/Buffer/Package initialization:.......................... |
|---|
| 104 | ................................................................................ |
|---|
| 105 | ..................... |
|---|
| 106 | Initialized 15/23 Regions 30/30 Fields 36/36 Buffers 46/48 Packages (921 nodes) |
|---|
| 107 | Initializing Device/Processor/Thermal objects by executing _INI methods:.. |
|---|
| 108 | Executed 2 _INI methods requiring 0 _STA executions (examined 71 objects) |
|---|
| 109 | ************ AcpiInitializeObjects mask:0 Status = 0 |
|---|
| 110 | Processor [P001] |
|---|
| 111 | Processor [P002] |
|---|
| 112 | Processor [P003] |
|---|
| 113 | Processor [P004] |
|---|
| 114 | Status 0x0 0 |
|---|
| 115 | ************ AcpiInstallNotifyHandler System Status = 0 |
|---|
| 116 | ************ AcpiInstallNotifyHandler Device Status = 0 |
|---|
| 117 | |
|---|
| 118 | Init ACPI rc=0 |
|---|
| 119 | APIC0 phys FEC00000 lin: FFDF1000 APIC ID 2000000 (178021) Ver 21 MaxIO entry 0x |
|---|
| 120 | 17 (2000000) Arbitration ID 2 set to (2000000) 2 Id (2000000) 2 |
|---|
| 121 | Set 24 lines from IRQ0 |
|---|
| 122 | =========== Status set APIC mode 0x0 |
|---|
| 123 | Current IRQs line 24 |
|---|
| 124 | IRQ0 override to IRQ2 Vector:50 Line:2 |
|---|
| 125 | IRQ9 override to IRQ9 Vector:71 Line:9 |
|---|
| 126 | WakeupVector Lin: FFDED000 |
|---|
| 127 | WakeupVector Lin: FFDED000 Phys: 63000 IPIStack:FFDEB000 s_cpu:0 |
|---|
| 128 | GetWakeupVector Status = 0 |
|---|
| 129 | PIC Mask:FFFFDFFB |
|---|
| 130 | PSD_GET_NUM_OF_PROCS - has 2 CPU |
|---|
| 131 | ProcInit CPU0 |
|---|
| 132 | LApic ID:0x0: ver 0x80050010 |
|---|
| 133 | Max LVT=6 |
|---|
| 134 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
|---|
| 135 | Status Evaluate Processor 0x0 AE_OK |
|---|
| 136 | Usable:2 Counter:0 |
|---|
| 137 | CPU id to N:0 |
|---|
| 138 | ProcId: 0x1 |
|---|
| 139 | P_BLK: 0x810 |
|---|
| 140 | P_BLK len: 0x6 |
|---|
| 141 | CPU0 Status Evaluate _PCT 0x0 AE_OK |
|---|
| 142 | Perf control: 0x0 |
|---|
| 143 | Perf status: 0x0 |
|---|
| 144 | End init CPU0 rc:0 |
|---|
| 145 | StartProcessor: CPU1 id 2 |
|---|
| 146 | StartProcessor: Warm Vector:18000004, BootCode.Lin:0xFFDED000, BootCode.Phys:0x6 |
|---|
| 147 | 3000 |
|---|
| 148 | StartProcessor 1 id:2 LAPICid:1 |
|---|
| 149 | Wait INI App Proc |
|---|
| 150 | Send SIPI1 |
|---|
| 151 | StartProcessor success SIPI1 |
|---|
| 152 | ProcInit CPU1 |
|---|
| 153 | LApic ID:0x1000000: ver 0x80050010 |
|---|
| 154 | Max LVT=6 |
|---|
| 155 | End Startup code |
|---|
| 156 | Set HLT duration as IOdelay:0x256 |
|---|
| 157 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
|---|
| 158 | Status Evaluate Processor 0x0 AE_OK |
|---|
| 159 | Usable:2 Counter:1 |
|---|
| 160 | CPU id to N:1 |
|---|
| 161 | ProcId: 0x2 |
|---|
| 162 | P_BLK: 0x0 |
|---|
| 163 | P_BLK len: 0x0 |
|---|
| 164 | CPU1 Status Evaluate _PCT 0x0 AE_OK |
|---|
| 165 | Perf control: 0x0 |
|---|
| 166 | Perf status: 0x0 |
|---|
| 167 | End init CPU1 rc:0 |
|---|
