Ticket #177: acpi.log

AllocIRQMem at 0xFFEA4000 (24576 bytes)

PSD_install options:" " @#netlabs dot org:3.5#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Nov 25 2007 02:10:40
MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
SS Selector fault
AcpiOsInitialize ALLOC size 65536 at 0xF9AE3000
AcpiOsInitialize MapMem size 4096 at 0xFFEA1000
AcpiOsCreateLock F9AE31F0
AcpiOsCreateLock F9AE3208
AcpiOsPredefinedOverride: "_REV"
AcpiOsPredefinedOverride: "_OS_"
AcpiOsPredefinedOverride: override to eComStation
AcpiOsPredefinedOverride: "_GL_"
AcpiOsCreateSemaphore: O.K. Handle=0xF9AE3428 M:1 I:0
AcpiOsPredefinedOverride: "_OSI"
AcpiOsPredefinedOverride: override to eCS
*** AcpiInitializeSubsystem Status = 0 ***
ACPI: RSDP @ 0xF7750/0x14 (v0 IntelR)
ACPI: RSDT @ 0x1FFF3000/0x2C (v1 IntelR AWRDACPI 0x42302E31 AWRD 0x0)
ACPI: FACP @ 0x1FFF3040/0x74 (v1 IntelR AWRDACPI 0x42302E31 AWRD 0x0)
ACPI: DSDT @ 0x1FFF30C0/0x445C (v1 INTELR AWRDACPI 0x1000 MSFT 0x100000E)
ACPI: FACS @ 0x1FFF0000/0x40
ACPI: APIC @ 0x1FFF7540/0x68 (v1 IntelR AWRDACPI 0x42302E31 AWRD 0x0)
*** AcpiInitializeTables Status = 0 ***
AcpiOsTableOverride Ex:FFE8B0C0 New:FFDEBDA4 SIG:[DSDT]
*** AcpiLoadTables Status = 0 ***
Table [DSDT]
Table [FACS]
Table [FACP]
Table [APIC]
Local APIC address: FEE00000h
System also has 8259
APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
APIC_PROCESSOR: ProcID 1h LocalApicID 1h - not usable
APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
Size of FACDT 244
Type of computer - Unspecified
System vector the SCI interrupt is wired to in 8259 mode. 9
System port address of the SMI Command Port 0xB2
The value to write to SMI_CMD to disable SMI   0xA1
The value to write to SMI_CMD to re-enable SMI 0xA0
The value to write to SMI_CMD to enter the S4BIOS state 0x0
System port address of the PM1a Event Register Block 400
System port address of the PM1b Event Register Block 0
Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
System port address of the PM1a Control Register Block 404
System port address of the PM1b Control Register Block 0
Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
System port address of the PM2 Control Register Block 0
System port address of the Power Management Timer Control Register Block 408
Number of bytes decoded by PM_TMR_BLK (=4) 4
System port address of General-Purpose Event 0 Register Block 428
System port address of General-Purpose Event 1 Register Block 0
Number of bytes decoded by GPE0_BLK 0x8
Number of bytes decoded by GPE1_BLK 0x0
Offset within the ACPI general-purpose event model where GPE1 based events start 0
GPE enable register: 0: 0: 0: 0
GPE status register: 0: 0: C0: CE
The system does not support a C2 state. 65
The system does not support a C3 state 3E9
The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
The bit width of the processor's duty cycle setting value in the P_CNT register 1
The RTC CMOS RAM index to the day-of-month alarm value 13
IA-PC Boot Architecture Flags 0x0
Fixed feature flags 4A5
The reset register:
Type of address space - System Memory
Register Bit Width  0
Register Bit Offset 0
Access size 0
Address 0
The value to write to the RESET_REG port to reset the system 0
***** Throttl Width 1 Offset 1
AcpiOsInstallIntterrupHandler IRQ9 handler F9C90F09
************ AcpiEnableSubsystem Status = 0
AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
************ Scan EC Status = 0
************ AcpiInitializeObjects mask:0 Status = 0
Processor [CPU0]
Processor [CPU1]
Status 0x0 0
Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
Status Evaluate Processor 0x0 AE_OK
Usable:1 Counter:0 
 CPU id to N:0
 ProcId:     0x0
 P_BLK:      0x0
 P_BLK len:  0x0
CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
************ AcpiInstallNotifyHandler System Status = 0
************ AcpiInstallNotifyHandler Device Status = 0
Found bridge "PCI0" Addr:0x0 BBN is 0 Dev:0x0 Fun:0x0
Finding:1 bridges
0:0.0  Class:600  Hdr:0   Bridge H->0
0:1.0  Class:604  Hdr:1   Bridge 0->1
0:29.0  Class:C03  Hdr:80
0:29.1  Class:C03  Hdr:0
0:29.2  Class:C03  Hdr:0
0:29.3  Class:C03  Hdr:0
0:29.7  Class:C03  Hdr:0
0:30.0  Class:604  Hdr:1   Bridge 0->2
0:31.0  Class:601  Hdr:80
0:31.2  Class:101  Hdr:0
0:31.3  Class:C05  Hdr:0
0:31.5  Class:401  Hdr:0
1:0.0  Class:300  Hdr:80
1:0.1  Class:380  Hdr:0
2:5.0  Class:200  Hdr:0
2:6.0  Class:400  Hdr:80
2:6.1  Class:480  Hdr:80
PCI Bus scan: 3 PCI buses found.
Scan ACPI tree for PCI functions
0:0.0  'PCI0' (F9AE59A0)
0:30.0  'HUB0' (F9AE5C38)
0:31.0  'PX40' (F9AE5E78)
0:29.0  'USB0' (F9AE9490)
0:29.1  'USB1' (F9AE9568)
0:29.2  'USB2' (F9AE9640)
0:29.3  'USB3' (F9AE9718)
0:29.7  'USBE' (F9AE97F0)
0:31.1  'ICHX' (F9AE98C8)
0:31.2  'IDE1' (F9AEA398)
0:31.3  'PX43' (F9AEAD50)
0:31.6  'MODM' (F9AEAEC0)
Bridges found:
0:0.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (F9AE59A0) _PRT
0:1.0  class:604  type: 1  Bus 0->1
0:30.0  class:604  type: 1  Bus 0->2  ACPI: 'HUB0' (F9AE5C38) _PRT
IRQLinks found:
0: 'LNKA' (F9AEAFC0)  P[ 3, 4, 5, 7, 9, 10, 11,*12, 14, 15] <- 1:0.0 0:29.3 0:29.0
                       A[]
1: 'LNKC' (F9AEB470)  P[ 3, 4, 5, 7, 9, 10,*11, 12, 14, 15] <- 0:31.2 0:29.2
                       A[]
2: 'LNKB' (F9AEB218)  P[ 3, 4, 5, 7, 9, 10,*11, 12, 14, 15] <- 0:31.5 0:31.3
                       A[]
3: 'LNKD' (F9AEB6C8)  P[ 3, 4, 5, 7, 9, 10, 11,*12, 14, 15] <- 0:29.1
                       A[]
4: 'LNK1' (F9AEC028)  P[ 3, 4, 5, 7, 9,*10, 11, 12, 14, 15] <- 0:29.7
                       A[]
5: 'LNKE' (F9AEB920)  P[]
                       A[]
6: 'LNKF' (F9AEBB78)  P[ 3, 4, 5, 7, 9,*10, 11, 12, 14, 15] <- 2:5.0
                       A[]
7: 'LNK0' (F9AEBDD0)  P[ 3, 4,*5, 7, 9, 10, 11, 12, 14, 15] <- 2:6.1 2:6.0
                       A[]
PCI devices found:
0:0.0  8086:2570  'PCI0'
0:1.0  8086:2571        
0:29.0  8086:24D2  'USB0'  IRQs: PCI:12 PIC:'LNKA':12 APIC:16
0:29.1  8086:24D4  'USB1'  IRQs: PCI:12 PIC:'LNKD':12 APIC:19
0:29.2  8086:24D7  'USB2'  IRQs: PCI:11 PIC:'LNKC':11 APIC:18
0:29.3  8086:24DE  'USB3'  IRQs: PCI:12 PIC:'LNKA':12 APIC:16
0:29.7  8086:24DD  'USBE'  IRQs: PCI:10 PIC:'LNK1':10 APIC:23
0:30.0  8086:244E  'HUB0'
0:31.0  8086:24D0  'PX40'
0:31.2  8086:24D1  'IDE1'  IRQs: PCI:11 PIC:'LNKC':11 APIC:18
0:31.3  8086:24D3  'PX43'  IRQs: PCI:11 PIC:'LNKB':11 APIC:17
0:31.5  8086:24D5          IRQs: PCI:11 PIC:'LNKB':11 APIC:17
1:0.0  1002:5961          IRQs: PCI:12 PIC:'LNKA':12 APIC:16
1:0.1  1002:5941        
2:5.0  1186:4B01          IRQs: PCI:10 PIC:'LNKF':10 APIC:21
2:6.0  109E:36E          IRQs: PCI:5 PIC:'LNK0':5 APIC:22
2:6.1  109E:878          IRQs: PCI:5 PIC:'LNK0':5 APIC:22
Bus detected - 2
************ AcpiInstall Power Device Status = 0
ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320]
ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320]
************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
************ AcpiInstall PMTimer Device Status = 0
** Total use:103184 unuse:3840 count:1751 **
Get GpeHdl Status = 0 - AE_OK
Event [_L00]
Install GPE0x0  Status 0x0
Event [_L05]
Install GPE0x5  Status 0x0
Event [_L03]
Install GPE0x3  Status 0x0
Event [_L04]
Install GPE0x4  Status 0x0
Event [_L0B]
Install GPE0xB  Status 0x0
Event [_L08]
Install GPE0x8  Status 0x0
Event [_L0C]
Install GPE0xC  Status 0x0
Event [_L0E]
Install GPE0xE  Status 0x0
Event [_L0D]
Install GPE0xD  Status 0x0
EndScan GPE Status 0
===== Info ========
Int Level 9
In Xrupt F9AF1A60 in arg F9AF1A60
      Node
Name [_GPE]
Flags: 0
Reg count 4
GPE0x0 Flag:0x4 Status - Set 0x0 Enable 0x0
GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0 Status:428 Enable:42C EnableWake:38 EnableRun:1 BaseGPENumber:0
GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
GPE1 Status:429 Enable:42D EnableWake:79 EnableRun:0 BaseGPENumber:8
GPE2 Status:42A Enable:42E EnableWake:0 EnableRun:0 BaseGPENumber:10
GPE3 Status:42B Enable:42F EnableWake:0 EnableRun:0 BaseGPENumber:18
=========== Status 0x0 0
ACPI Error (dsmthdat-551): Uninitialized Local[0] at node F9ADD574 [20070320]
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [UAR1] Value:0
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [PWRB] Value:2
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [USB0] Value:0
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [USB1] Value:0
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [USB2] Value:0
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [USB3] Value:0
ACPI Error (dsmthdat-551): Uninitialized Local[0] at node F9ADD574 [20070320]
************ Leave Sleep Status = 0x0 - AE_OK
FindPCIDevice
 Need: B:0 D:1F F:2
Finding APIC18 PIC11 Dev: [IDE1]