Ticket #168: ACPI_v305-DEBUG_(with-SMP-APIC-noNOD)_Athlon64X2_ASUS-Pundit_P1-AH2.txt

AllocIRQMem at 0xFFE89000 (24576 bytes)

PSD_install options:" /SMP /APIC /!NOD" @#netlabs dot org:3.5#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Nov 25 2007 01:57:22
MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
New Stack = FFD00000 Size:0x8000
PSD_INIT ESP=0xFFCFFFE0
AcpiOsInitialize ALLOC size 65536 at 0xF96B0000
AcpiOsInitialize MapMem size 4096 at 0xFFE9E000
AcpiOsCreateLock 8
AcpiOsCreateLock 0
AcpiOsPredefinedOverride: "_REV"
AcpiOsPredefinedOverride: "_OS_"
AcpiOsPredefinedOverride: override to eComStation
AcpiOsPredefinedOverride: "_GL_"
AcpiOsCreateSemaphore: O.K. Handle=0xF96B03F8 M:1 I:0
AcpiOsPredefinedOverride: "_OSI"
AcpiOsPredefinedOverride: override to eCS
*** AcpiInitializeSubsystem Status = 0 ***
ACPI: RSDP @ 0xF6D20/0x24 (v2 Nvidia)
ACPI: XSDT @ 0x3DEF30C0/0x4C (v1 _ASUS_ Notebook 0x42302E31 AWRD 0x0)
ACPI: FACP @ 0x3DEFA300/0xF4 (v3 _ASUS_ Notebook 0x42302E31 AWRD 0x0)
ACPI: DSDT @ 0x3DEF3240/0x7055 (v1 _ASUS_ Notebook 0x1000 MSFT 0x3000000)
ACPI: FACS @ 0x3DEF0000/0x40
ACPI: SLIC @ 0x3DEFA500/0x176 (v1 _ASUS_ Notebook 0x42302E31 AWRD 0x0)
ACPI: SSDT @ 0x3DEFA6C0/0x1C4 (v1 _ASUS_ Notebook 0x1  LTP 0x1)
ACPI: MCFG @ 0x3DEFA980/0x3C (v1 _ASUS_ Notebook 0x42302E31 AWRD 0x0)
ACPI: APIC @ 0x3DEFA440/0x7C (v1 _ASUS_ Notebook 0x42302E31 AWRD 0x0)
*** AcpiInitializeTables Status = 0 ***
AcpiOsTableOverride Ex:FFCDB240 New:FFCFFFAC SIG:[DSDT]
tbxface-619 [2] TbLoadNamespace: ACPI Tables successfully acquired
*** AcpiLoadTables Status = 0 ***
Table [DSDT]
Table [FACS]
Table [FACP]
Table [SLIC]
Table [SSDT]
Table [MCFG]
Table [APIC]
Local APIC address: FEE00000h
System also has 8259
APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable
APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 0 - Polarity active: Bus spec Trigger by: Bus spec
APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
APIC_XRUPT_OVERRIDE: Bus: 0h Source 14 Global SysInt 14 - Polarity active: High 0 Trigger by: Edge
APIC_XRUPT_OVERRIDE: Bus: 0h Source 15 Global SysInt 15 - Polarity active: High 0 Trigger by: Edge
APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
Size of FACDT 244
Type of computer - Desktop
System vector the SCI interrupt is wired to in 8259 mode. 9
System port address of the SMI Command Port 0x442E
The value to write to SMI_CMD to disable SMI   0xA1
The value to write to SMI_CMD to re-enable SMI 0xA0
The value to write to SMI_CMD to enter the S4BIOS state 0x0
System port address of the PM1a Event Register Block 4000
System port address of the PM1b Event Register Block 0
Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
System port address of the PM1a Control Register Block 4004
System port address of the PM1b Control Register Block 0
Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
System port address of the PM2 Control Register Block 401C
Number of bytes decoded by PM2_CNT_BLK 1
System port address of the Power Management Timer Control Register Block 4008
Number of bytes decoded by PM_TMR_BLK (=4) 4
System port address of General-Purpose Event 0 Register Block 4020
System port address of General-Purpose Event 1 Register Block 44A0
Number of bytes decoded by GPE0_BLK 0x8
Number of bytes decoded by GPE1_BLK 0x10
Offset within the ACPI general-purpose event model where GPE1 based events start 20
GPE enable register: 0: 0: 0: 0
GPE status register: 40: 0: 0: 0
The system does not support a C2 state. 65
The system does not support a C3 state 3E9
The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
The bit width of the processor's duty cycle setting value in the P_CNT register 3
The RTC CMOS RAM index to the day-of-month alarm value 125
The RTC CMOS RAM index to the month of year alarm value 126
The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
IA-PC Boot Architecture Flags 0x0
Fixed feature flags 4A5
The reset register:
Type of address space - System I/O
Register Bit Width  8
Register Bit Offset 0
Access size 0
Address 3321
The value to write to the RESET_REG port to reset the system 6
***** Throttl Width 3 Offset 1
evxfevnt-176 [2] Enable: Transition to ACPI mode successful
evgpeblk-1105 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1105 [4] EvCreateGpeBlock: GPE 20 to 5F [_GPE] 8 regs on int 0x9
AcpiOsInstallIntterrupHandler IRQ9 handler F96FDC8D
evgpeblk-1205 [3] EvInitializeGpeBlock: Found 7 Wake, Enabled 1 Runtime GPEs in this block
evgpeblk-1205 [3] EvInitializeGpeBlock: Found 0 Wake, Enabled 0 Runtime GPEs in this block
************ AcpiEnableSubsystem Status = 0
AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:10 Fun:0 - Derive: Bus:0 Dev:10 Fun:0
************ Scan EC Status = 0
Completing Region/Field/Buffer/Package initialization:...................................................................................................................AcpiOsDerivePCIID([PCI0] ,[SMCA],) Bus:0 Dev:10 Fun:1 - Derive: Bus:0 Dev:10 Fun:1
.........
Initialized 37/41 Regions 9/9 Fields 35/35 Buffers 43/48 Packages (1363 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:...
Executed 3 _INI methods requiring 1 _STA executions (examined 106 objects)
************ AcpiInitializeObjects mask:0 Status = 0
Processor [CPU0]
Processor [CPU1]
Status 0x0 0
************ AcpiInstallNotifyHandler System Status = 0
************ AcpiInstallNotifyHandler Device Status = 0

Init ACPI rc=0
APIC0 phys FEC00000 lin: FFE83000 APIC ID 0 (170011) Ver 11 MaxIO entry 0x17 (0) Arbitration ID 0 set to (2000000) 2 Id  (2000000) 2
Set 24 lines from IRQ0
=========== Status set APIC mode 0x0
AcpiOsDerivePCIID([PCI0] ,[K181],) Bus:0 Dev:24 Fun:1 - Derive: Bus:0 Dev:24 Fun:1
AcpiOsDerivePCIID([PCI0] ,[GPUR],) Bus:0 Dev:5 Fun:0 - Derive: Bus:0 Dev:5 Fun:0
Current IRQs line 24
IRQ9 override to IRQ9 Vector:71 Line:9
IRQ14 override to IRQ14 Vector:76 Line:14
IRQ15 override to IRQ15 Vector:77 Line:15
WakeupVector Lin: FFE82000
WakeupVector Lin: FFE82000 Phys: 6E000 IPIStack:FFDEE000 s_cpu:FFDEC000
GetWakeupVector Status = 0
PIC Mask:FFFFDFFB
PSD_GET_NUM_OF_PROCS - has 2 CPU
ProcInit CPU0
LApic ID:0x0: ver 0x80050010
Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
Status Evaluate Processor 0x0 AE_OK
Usable:2 Counter:0 
 CPU id to N:0
 ProcId:     0x0
 P_BLK:      0x0
 P_BLK len:  0x0
CPU0 Status Evaluate _PCT 0x0 AE_OK
 Perf control:  0x0
 Perf status:  0x0
CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
StartProcessor: CPU1 id 1
StartProcessor: Warm Vector:18000004, BootCode.Lin:0xFFE82000, BootCode.Phys:0x6E000
StartProcessor 1 id:1 LAPICid:1
Wait INI App Proc
Send SIPI1
StartProcessor success SIPI1
ProcInit CPU1
LApic ID:0x1000000: ver 0x80050010
End Startup code
Set HLT duration as IOdelay:0x1E7
Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
Status Evaluate Processor 0x0 AE_OK
Usable:2 Counter:1 
 CPU id to N:1
 ProcId:     0x1
 P_BLK:      0x0
 P_BLK len:  0x0
CPU1 Status Evaluate _PCT 0x0 AE_OK
 Perf control:  0x0
 Perf status:  0x0
CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND
UNMASK PIC IRQ8 mask 0xFFFFDEFB Real:FFEBB8F4
OemHlpXHandler: ACPI.CFG opened: Size is 2010 bytes
OemHlpXHandler: ACPI.CFG read: 2010 bytes
OemHlpXHandler: ACPI.CFG closed: 0, Buffer at FD3A33EC
UNMASK PIC IRQ9 mask 0xFFFFDCFB Real:FFEBB8F4
** Create resource, max = 31 **
OemHlpXHandler: ACPI_START_EVENTS 3
************ AcpiInstall Power Device Status = 0
ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320]
ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320]
************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
************ AcpiInstall PMTimer Device Status = 0
** Total use:178472 unuse:8368 count:3505 **
Get GpeHdl Status = 0 - AE_OK
PSDFree: at 0xF96C0000 success!
Event [_L11]
Install GPE0x11  Status 0x0
Event [_L00]
Install GPE0x0  Status 0x0
Event [_L03]
Install GPE0x3  Status 0x0
Event [_L0B]
Install GPE0xB  Status 0x0
Event [_L0D]
Install GPE0xD  Status 0x0
Event [_L05]
Install GPE0x5  Status 0x0
Event [_L10]
Install GPE0x10  Status 0x0
Event [_L15]
Install GPE0x15  Status 0x0
EndScan GPE Status 0
===== Info ========
Int Level 9
In Xrupt F96924E8 in arg F96924E8
      Node
Name [_GPE]
Flags: 0
Reg count 4
GPE0x0 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0 Status:4020 Enable:4024 EnableWake:29 EnableRun:0 BaseGPENumber:0
GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
GPE1 Status:4021 Enable:4025 EnableWake:28 EnableRun:0 BaseGPENumber:8
GPE0x10 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x11 Flag:0x4 Status - Set 0x0 Enable 0x0
GPE0x15 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE2 Status:4022 Enable:4026 EnableWake:21 EnableRun:2 BaseGPENumber:10
GPE3 Status:4023 Enable:4027 EnableWake:0 EnableRun:0 BaseGPENumber:18
===== Info ========
Int Level 9
In Xrupt F96924E8 in arg F9692758
      Node
Name [_GPE]
Flags: 0
Reg count 8
GPE0 Status:44A0 Enable:44A8 EnableWake:0 EnableRun:0 BaseGPENumber:20
GPE1 Status:44A1 Enable:44A9 EnableWake:0 EnableRun:0 BaseGPENumber:28
GPE2 Status:44A2 Enable:44AA EnableWake:0 EnableRun:0 BaseGPENumber:30
GPE3 Status:44A3 Enable:44AB EnableWake:0 EnableRun:0 BaseGPENumber:38
GPE4 Status:44A4 Enable:44AC EnableWake:0 EnableRun:0 BaseGPENumber:40
GPE5 Status:44A5 Enable:44AD EnableWake:0 EnableRun:0 BaseGPENumber:48
GPE6 Status:44A6 Enable:44AE EnableWake:0 EnableRun:0 BaseGPENumber:50
GPE7 Status:44A7 Enable:44AF EnableWake:0 EnableRun:0 BaseGPENumber:58
=========== Status 0x0 0
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [PWRB] Value:2
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [USB0] Value:0
AcpiOsDerivePCIID([PCI0] ,[SMCF],) Bus:0 Dev:10 Fun:1 - Derive: Bus:0 Dev:10 Fun:1
************ Leave Sleep Status = 0x0 - AE_OK
OemHlpXHandler: ACPI_START_EVENTS 4
OemHlpXHandler: CallACPI16: 47008DF, CallACPI32: F96D5182, ExportTable32: F9C001CC
UNMASK PIC IRQ1 mask 0xFFFFDCF9 Real:FFEBB8F4
UNMASK PIC IRQ10 mask 0xFFFFD8F9 Real:FFEBB8F4
UNMASK PIC IRQ10 mask 0xFFFFD8F9 Real:FFEBB8F4
APM: PSD find success. PSD Ftable:F9C001D0
Register Notify 1st FFCF51CE 
UNMASK PIC IRQ6 mask 0xFFFFDCB9 Real:FFEBB8F4
UNMASK PIC IRQ6 mask 0xFFFFDCB9 Real:FFEBB8F4
FindPCIDevice
FindPCIDevice
UNMASK PIC IRQ14 mask 0xFFFF9CF9 Real:FFEBB8F4
UNMASK PIC IRQ14 mask 0xFFFF9CF9 Real:FFEBB8F4
UNMASK PIC IRQ14 mask 0xFFFF9CF9 Real:FFEBB8F4
UNMASK PIC IRQ14 mask 0xFFFF9CF9 Real:FFEBB8F4
UNMASK PIC IRQ14 mask 0xFFFF9CF9 Real:FFEBB8F4
UNMASK PIC IRQ1 mask 0xFFFF9CF9 Real:FFEBB8F4
UNMASK PIC IRQ12 mask 0xFFFF8CF9 Real:FFEBB8F4
UNMASK PIC IRQ4 mask 0xFFFF8CE9 Real:FFEBB8F4
Gradd: PSD find success. PSD Ftable:F9C001D0
UNMASK PIC IRQ10 mask 0xFFFF88F9 Real:FFEBB8F4
UNMASK PIC IRQ10 mask 0xFFFF88F9 Real:FFEBB8F4
OemHlpXHandler: CMD_INIT_COMPLETE
PSD_SET_ADV_INT_MODE Apic 0 PIC 0
Dummy 0 IDT FFDBF370 Vector 50
Dummy 7 IDT FFDBF370 Vector 57
Dummy 8 IDT FFDBF370 Vector 70
Dummy 2C IDT FFDBF370 Vector F3
Dummy 2F IDT FFDBF370 Vector F2
Dummy 2E IDT FFDBF370 Vector 2E
UNMASK APIC IRQ0 mask 0xFFFFA8FC
UNMASK APIC IRQ11 mask 0xFFFFA0FC
******** Event tread ***************
APM: Setting suspend state:1
Button KernBlock 4294967295 timeout
AcpiExecSMPFunction: disable exec
AIR CPU1 Vec:0x57 IRQ7 Mask:FFFFA0FC 
SetCPU to 0 need 0 wait 2
AcpiExecSMPFunction:Fun:0xFA1D586C Ctx:FA1F4030 Flag:0xA00 Current CPU0
AcpiExecSMPFunction: wait CPUMask:0x3
Count:1 CPU1 FA1F4030
CPU1 end
Count:2 CPU0 FA1F4030
CPU0 end
AcpiExecSMPFunction: End