Ticket #140: acpica.log

09 Dec 22:31:25 acpica$ log is reading
AllocIRQMem at 0xFFE88000 (24576 bytes)

PSD_install options:" /SMP /APIC /!NOD" @#netlabs dot org:3.5#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Nov 25 2007 02:10:40
MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
New Stack = FFD00000 Size:0x8000
AcpiOsInitialize ALLOC size 65536 at 0xF96C0000
AcpiOsInitialize MapMem size 4096 at 0xFFE9E000
AcpiOsCreateLock 8
AcpiOsCreateLock 8
AcpiOsPredefinedOverride: "_REV"
AcpiOsPredefinedOverride: "_OS_"
AcpiOsPredefinedOverride: override to eComStation
AcpiOsPredefinedOverride: "_GL_"
AcpiOsCreateSemaphore: O.K. Handle=0xF96C03F8 M:1 I:0
AcpiOsPredefinedOverride: "_OSI"
AcpiOsPredefinedOverride: override to eCS
*** AcpiInitializeSubsystem Status = 0 ***
ACPI: RSDP @ 0xF8810/0x14 (v0 ACPIAM)
ACPI: RSDT @ 0x7FFD0000/0x38 (v1 A M I  OEMRSDT  0x11000606 MSFT 0x97)
ACPI: FACP @ 0x7FFD0200/0x84 (v2 A M I  OEMFACP  0x11000606 MSFT 0x97)
ACPI: DSDT @ 0x7FFD0440/0x4512 (v1 1ADJT 1ADJT007 0x7 INTL 0x20051117)
ACPI: FACS @ 0x7FFDE000/0x40
ACPI: APIC @ 0x7FFD0390/0x70 (v1 A M I  OEMAPIC  0x11000606 MSFT 0x97)
ACPI: MCFG @ 0x7FFD0400/0x3C (v1 A M I  OEMMCFG  0x11000606 MSFT 0x97)
ACPI: OEMB @ 0x7FFDE040/0x60 (v1 A M I  AMI_OEM  0x11000606 MSFT 0x97)
ACPI: SSDT @ 0x7FFD4960/0x206 (v1 A M I  POWERNOW 0x1 AMD  0x1)
*** AcpiInitializeTables Status = 0 ***
AcpiOsTableOverride Ex:FFE83440 New:FFCFFFC4 SIG:[DSDT]
*** AcpiLoadTables Status = 0 ***
Table [DSDT]
Table [FACS]
Table [FACP]
Table [APIC]
Local APIC address: FEE00000h
System also has 8259
APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable
APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable
APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 0 - Polarity active: Bus spec Trigger by: Bus spec
APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
APIC_XRUPT_OVERRIDE: Bus: 0h Source 14 Global SysInt 14 - Polarity active: High 0 Trigger by: Edge
APIC_XRUPT_OVERRIDE: Bus: 0h Source 15 Global SysInt 15 - Polarity active: High 0 Trigger by: Edge
Table [MCFG]
Table [OEMB]
Table [SSDT]
Size of FACDT 244
Type of computer - Unspecified
System vector the SCI interrupt is wired to in 8259 mode. 9
System port address of the SMI Command Port 0x442E
The value to write to SMI_CMD to disable SMI   0xE1
The value to write to SMI_CMD to re-enable SMI 0x1E
The value to write to SMI_CMD to enter the S4BIOS state 0x0
The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0xE2
System port address of the PM1a Event Register Block 4000
System port address of the PM1b Event Register Block 0
Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
System port address of the PM1a Control Register Block 4004
System port address of the PM1b Control Register Block 0
Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
System port address of the PM2 Control Register Block 0
System port address of the Power Management Timer Control Register Block 4008
Number of bytes decoded by PM_TMR_BLK (=4) 4
System port address of General-Purpose Event 0 Register Block 4020
System port address of General-Purpose Event 1 Register Block 44A0
Number of bytes decoded by GPE0_BLK 0x8
Number of bytes decoded by GPE1_BLK 0x10
Offset within the ACPI general-purpose event model where GPE1 based events start 20
GPE enable register: 20: 0: 0: 0
GPE status register: 40: 0: 0: 0
The value OSPM writes to the SMI_CMD register to indicate OS support for the _CST object and C States Changed notification 0xE3
The system does not support a C2 state. 65
The system does not support a C3 state 3E9
The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
The RTC CMOS RAM index to the day-of-month alarm value 125
The RTC CMOS RAM index to the month of year alarm value 126
The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
IA-PC Boot Architecture Flags 0x3
Fixed feature flags A5
The reset register:
Type of address space - System I/O09 Dec 22:31:25 AcpiDaemon PwrButton thread is starting ID 0x4

ress 3321
The value to write to the RESET_REG port to reset the system 6
***** Throttl Width 0 Offset 1
AcpiOsInstallIntterrupHandler IRQ9 handler F9710F09
************ AcpiEnableSubsystem Status = 0
AcpiOsDerivePCIID([PCI0] ,[PIMC],) Bus:0 Dev:1 Fun:0 - Derive: Bus:0 Dev:1 Fun:0
************ Scan EC Status = 0
************ AcpiInitializeObjects mask:0 Status = 0
Processor [P001]
Processor [P002]
Processor [CPU1]
Processor [CPU2]
Status 0x0 0
************ AcpiInstallNotifyHandler System Status = 0
************ AcpiInstallNotifyHandler Device Status = 0
Current IRQs line 24
Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
Status Evaluate Processor 0x0 AE_OK
Status C 0x0 AE_OK
Usable:2 Counter:0 
 CPU id to N:0
 ProcId:     0x1
 P_BLK:      0x4010
 P_BLK len:  0x6
CPU0 Status Evaluate _PCT 0x0 AE_OK
 Perf control:  0x0
 Perf status:  0x0
CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
Status Evaluate Processor 0x0 AE_OK
Status C 0x0 AE_OK
Usable:2 Counter:1 
 CPU id to N:1
 ProcId:     0x2
 P_BLK:      0x0
 P_BLK len:  0x0
CPU1 Status Evaluate _PCT 0x0 AE_OK
 Perf control:  0x0
 Perf status:  0x0
CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND
************ AcpiInstall Power Device Status = 0
ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320]
ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320]
************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
************ AcpiInstall PMTimer Device Status = 0
** Total use:139056 unuse:1232 count:2394 **
Get GpeHdl Status = 0 - AE_OK
Event [_L01]
Install GPE0x1  Status 0x0
Event [_L0B]
Install GPE0xB  Status 0x0
Event [_L10]
Install GPE0x10  Status 0x0
Event [_L09]
Install GPE0x9  Status 0x0
Event [_L0D]
Install GPE0xD  Status 0x0
Event [_L05]
Install GPE0x5  Status 0x0
Event [_L00]
Install GPE0x0  Status 0x0
Event [_L07]
Install GPE0x7  Status 0x0
PSDFree: at 0xF96D0000 success!
Event [_L11]
Install GPE0x11  Status 0x0
EndScan GPE Status 0
===== Info ========
Int Level 9
In Xrupt F96B16E0 in arg F96B16E0
      Node
Name [_GPE]
Flags: 0
Reg count 4
GPE0x0 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x1 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x7 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0 Status:4020 Enable:4024 EnableWake:A3 EnableRun:0 BaseGPENumber:0
GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
GPE1 Status:4021 Enable:4025 EnableWake:2A EnableRun:0 BaseGPENumber:8
GPE0x10 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x11 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE2 Status:4022 Enable:4026 EnableWake:3 EnableRun:0 BaseGPENumber:10
GPE3 Status:4023 Enable:4027 EnableWake:0 EnableRun:0 BaseGPENumber:18
===== Info ========
Int Level 9
In Xrupt F96B16E0 in arg F96B1950
      Node
Name [_GPE]
Flags: 0
Reg count 8
GPE0 Status:44A0 Enable:44A8 EnableWake:0 EnableRun:0 BaseGPENumber:20
GPE1 Status:44A1 Enable:44A9 EnableWake:0 EnableRun:0 BaseGPENumber:28
GPE2 Status:44A2 Enable:44AA EnableWake:0 EnableRun:0 BaseGPENumber:30
GPE3 Status:44A3 Enable:44AB EnableWake:0 EnableRun:0 BaseGPENumber:38
GPE4 Status:44A4 Enable:44AC EnableWake:0 EnableRun:0 BaseGPENumber:40
GPE5 Status:44A5 Enable:44AD EnableWake:0 EnableRun:0 BaseGPENumber:48
GPE6 Status:44A6 Enable:44AE EnableWake:0 EnableRun:0 BaseGPENumber:50
GPE7 Status:44A7 Enable:44AF EnableWake:0 EnableRun:0 BaseGPENumber:58
=========== Status 0x0 0
************ Leave Sleep Status = 0x5 - AE_NOT_FOUND
APM: PSD find success. PSD Ftable:F96E01D0
Register Notify 1st FFCC01CE 
FindPCIDevice
FindPCIDevice
FindPCIDevice
******** Event tread ***************
09 Dec 22:31:25 acpica$ log is reading
APM: Setting suspend state:1