Ticket #138: acpica.log

File acpica.log, 7.9 KB (added by guest, 12 years ago)

acpica$

Line 
1AllocIRQMem at 0xFFEA3000 (24576 bytes)
2
3PSD_install options:" /!NOD" @#netlabs dot org:3.4b#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Oct 26 2007 11:47:43
4MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0
5SS Selector fault
6PSD_INIT ESP=0xFFECCE7C
7WakeupVector Lin: FFEAD000
8WakeupVector Lin: FFEAD000 Phys: 63000 IPIStack:0 s_cpu:FFE8E000
9GetWakeupVector Status = 0
10PIC Mask:FFFFDFFB
11ProcInit CPU0
12OemHlpXHandler: ACPI.CFG opened: Size is 2010 bytes
13OemHlpXHandler: ACPI.CFG read: 2010 bytes
14OemHlpXHandler: ACPI.CFG closed: 0, Buffer at FDBA24D8
15DosTable: A007662
16DosTable2: FFDD36A7 intSwitchStack:FFF17B82
17AcpiOsInitialize ALLOC size 65536 at 0xF9FE3000
18AcpiOsInitialize MapMem size 4096 at 0xFFE8D000
19AcpiOsCreateLock F9FE31F0
20AcpiOsCreateLock F9FE3208
21AcpiOsPredefinedOverride: "_REV"
22AcpiOsPredefinedOverride: "_OS_"
23AcpiOsPredefinedOverride: override to eComStation
24AcpiOsPredefinedOverride: "_GL_"
25AcpiOsCreateSemaphore: O.K. Handle=0xF9FE3428 M:1 I:0
26AcpiOsPredefinedOverride: "_OSI"
27AcpiOsPredefinedOverride: override to eCS
28*** AcpiInitializeSubsystem Status = 0 ***
29ACPI: RSDP @ 0xF6D30/0x14 (v0 IntelR)
30ACPI: RSDT @ 0x1F7F3000/0x30 (v1 IntelR MSI ACPI 0x42302E31 AWRD 0x0)
31ACPI: FACP @ 0x1F7F3040/0x74 (v1 IntelR MSI ACPI 0x42302E31 AWRD 0x0)
32ACPI: DSDT @ 0x1F7F30C0/0x40B7 (v1 INTELR AWRDACPI 0x1000 MSFT 0x100000E)
33ACPI: FACS @ 0x1F7F0000/0x40
34ACPI: BOOT @ 0x1F7F7180/0x28 (v1 IntelR AWRDACPI 0x42302E31 AWRD 0x0)
35ACPI: APIC @ 0x1F7F71C0/0x68 (v1 IntelR AWRDACPI 0x42302E31 AWRD 0x0)
36*** AcpiInitializeTables Status = 0 ***
37AcpiOsTableOverride Ex:FFE880C0 New:FFDEAD84 SIG:[DSDT]
38tbxface-619 [2] TbLoadNamespace: ACPI Tables successfully acquired
39*** AcpiLoadTables Status = 0 ***
40Table [DSDT]
41Table [FACS]
42Table [FACP]
43Table [BOOT]
44Table [APIC]
45Local APIC address: FEE00000h
46System also has 8259
47APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
48APIC_PROCESSOR: ProcID 1h LocalApicID 1h - not usable
49APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
50APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
51APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
52APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
53APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
54Size of FACDT 244
55Type of computer - Unspecified
56System vector the SCI interrupt is wired to in 8259 mode. 9
57System port address of the SMI Command Port 0xB2
58The value to write to SMI_CMD to disable SMI   0xA1
59The value to write to SMI_CMD to re-enable SMI 0xA0
60The value to write to SMI_CMD to enter the S4BIOS state 0x0
61System port address of the PM1a Event Register Block 4000
62System port address of the PM1b Event Register Block 0
63Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
64System port address of the PM1a Control Register Block 4004
65System port address of the PM1b Control Register Block 0
66Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
67System port address of the PM2 Control Register Block 0
68System port address of the Power Management Timer Control Register Block 4008
69Number of bytes decoded by PM_TMR_BLK (=4) 4
70System port address of General-Purpose Event 0 Register Block 4028
71System port address of General-Purpose Event 1 Register Block 0
72Number of bytes decoded by GPE0_BLK 0x8
73Number of bytes decoded by GPE1_BLK 0x0
74Offset within the ACPI general-purpose event model where GPE1 based events start 0
75GPE enable register: 0: 0: 0: 10
76GPE status register: 0: 0: 0: 0
77The system does not support a C2 state. 65
78The system does not support a C3 state 3E9
79The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
80The bit width of the processor's duty cycle setting value in the P_CNT register 1
81The RTC CMOS RAM index to the day-of-month alarm value 13
82IA-PC Boot Architecture Flags 0x0
83Fixed feature flags 4A5
84The reset register:
85Type of address space - System Memory
86Register Bit Width  0
87Register Bit Offset 0
88Access size 0
89Address 0
90The value to write to the RESET_REG port to reset the system 0
91***** Throttl Width 1 Offset 1
92evxfevnt-176 [2] Enable: Transition to ACPI mode successful
93evgpeblk-1105 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x9
94AcpiOsInstallIntterrupHandler IRQ9 handler FA17D88D
95evgpeblk-1205 [3] EvInitializeGpeBlock: Found 8 Wake, Enabled 0 Runtime GPEs in this block
96************ AcpiEnableSubsystem Status = 0
97AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
98AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
99************ Scan EC Status = 0
100Completing Region/Field/Buffer/Package initialization:.........................................................................
101Initialized 32/36 Regions 9/9 Fields 21/21 Buffers 11/12 Packages (572 nodes)
102Initializing Device/Processor/Thermal objects by executing _INI methods:..
103Executed 2 _INI methods requiring 1 _STA executions (examined 53 objects)
104************ AcpiInitializeObjects mask:0 Status = 0
105Processor [CPU0]
106Processor [CPU1]
107Status 0x0 0
108Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
109Status Evaluate Processor 0x0 AE_OK
110Usable:1 Counter:0
111 CPU id to N:0
112 ProcId:     0x0
113 P_BLK:      0x0
114 P_BLK len:  0x0
115CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
116CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
117************ AcpiInstallNotifyHandler System Status = 0
118************ AcpiInstallNotifyHandler Device Status = 0
119
120Init ACPI rc=0
121** Create resource, max = 31 **
122OemHlpXHandler: ACPI_START_EVENTS 3
123************ AcpiInstall Power Device Status = 0
124ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320]
125ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320]
126************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
127************ AcpiInstall PMTimer Device Status = 0
128** Total use:90360 unuse:12936 count:1768 **
129Get GpeHdl Status = 0 - AE_OK
130Event [_L05]
131Install GPE0x5  Status 0x0
132Event [_L03]
133Install GPE0x3  Status 0x0
134Event [_L04]
135Install GPE0x4  Status 0x0
136Event [_L0B]
137Install GPE0xB  Status 0x0
138Event [_L08]
139Install GPE0x8  Status 0x0
140Event [_L1B]
141Install GPE0x1B  Status 0x0
142Event [_L0C]
143Install GPE0xC  Status 0x0
144Event [_L0D]
145Install GPE0xD  Status 0x0
146EndScan GPE Status 0
147===== Info ========
148Int Level 9
149In Xrupt F9FF1E70 in arg F9FF1E70
150      Node
151Name [_GPE]
152Flags: 0
153Reg count 4
154GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
155GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
156GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
157GPE0 Status:4028 Enable:402C EnableWake:38 EnableRun:0 BaseGPENumber:0
158GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
159GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
160GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
161GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
162GPE1 Status:4029 Enable:402D EnableWake:39 EnableRun:0 BaseGPENumber:8
163GPE2 Status:402A Enable:402E EnableWake:0 EnableRun:0 BaseGPENumber:10
164GPE0x1B Flag:0x2 Status - Set 0x0 Enable 0x0
165GPE3 Status:402B Enable:402F EnableWake:8 EnableRun:0 BaseGPENumber:18
166=========== Status 0x0 0
167ACPI Error (dsmthdat-551): Uninitialized Local[0] at node F9FDBF64 [20070320]
168AcpiOsExecute type:1
169AcpiOsExecute - direct executing
170*** System Notify ***
171Dev: [UAR1] Value:0
172AcpiOsExecute type:1
173AcpiOsExecute - direct executing
174*** System Notify ***
175Dev: [PWRB] Value:2
176AcpiOsExecute type:1
177AcpiOsExecute - direct executing
178*** System Notify ***
179Dev: [USB0] Value:0
180AcpiOsExecute type:1
181AcpiOsExecute - direct executing
182*** System Notify ***
183Dev: [USB1] Value:0
184AcpiOsExecute type:1
185AcpiOsExecute - direct executing
186*** System Notify ***
187Dev: [USB2] Value:0
188ACPI Error (dsmthdat-551): Uninitialized Local[0] at node F9FDBF64 [20070320]
189************ Leave Sleep Status = 0x0 - AE_OK
190OemHlpXHandler: ACPI_START_EVENTS 4
191OemHlpXHandler: CallACPI16: 4C808DF, CallACPI32: FA155052, ExportTable32: FA1401BC
192FindPCIDevice
193OemHlpXHandler: CMD_INIT_COMPLETE